有序介孔碳CMK-3负载金纳米微粒复合材料的制备和表征

分别采用等体积浸渍-甲醛还原、等体积浸渍-氢气还原及溶胶负载法在介孔碳CMK-3上负载金纳米微粒;利用透射电镜和粉末X射线衍射仪对比分析了采用3种方法得到的复合材料的微结构和相组成;并测定了采用溶胶负载法得到的不同金含量的复合材料的热稳定性.结果表明,所制备的金纳米微粒的尺寸因制备方法不同而呈现明显差异;负载于复合材料中的金纳米微粒具有很好的热稳定性.     

锂离子电池电极用规整中孔碳分子筛的电化学特性

采用SEM, N₂吸附技术和XRD对首次用于锂离子电池电极的规整中孔碳分子筛CMK-5的表面形态、孔结构和晶体结构进行了表征. 利用恒电流仪和伏安循环法研究了CMK-5的电化学性质, 并与传统的阳极材料石墨进行对比. 结果表明, CMK-5具有良好的可逆特性, 在第三次充电-放电循环中贮能密度仍可达525 mAh/g, 由于CMK-5具有特殊的中孔结构, 因而更适合用作快速充电-放电循环材料. 一个有趣的现象是, CMK-5在伏安循环的正值部分没有出现极值, 这与传统阳极材料显著不同. 另外, 还利用XPS和XRD考察了CMK-5的充电-放电特性.     

Zn-空气电池中二维与三维结构碳负载Mn3O4的催化性能比较

采用湿法浸渍将Mn3O4负载到不同碳材料的表面, 测试了这些复合材料用于空气电极催化剂的电催化性能. 通过充放电和循环伏安等电化学测试发现, 具有三维孔道结构的介孔碳材料(CMK-3)的催化性能远比二维孔道结构的介孔碳(OMC)的好. 从透射电子显微镜观察发现, 氧化锰粒子均负载在碳的外表面, 位于三维孔道外表面的氧化锰可以与电解液和碳孔道内的氧气同时接触. 这种结构产生了大量有效的三相反应界面, 从而达到良好的催化效果.     

高容量锂离子电池正极复合材料pillar[5]quinone/CMK-3的制备

以有机醌类化合物柱[5]醌(pillar[5]quinone,P5Q)作为锂离子电池的正极材料,探索了其储锂性能。实验结果表明,P5Q首圈放电容量达到了431 mAh·g^-1,显示出100%的活性位点利用率。然而,P5Q在电解液中的溶解会导致循环过程中容量的衰减。采用超声法将P5Q填入有序介孔碳CMK-3的孔道,制备了P5Q/CMK-3复合材料,以此减少P5Q与电解液的接触,从而减缓了P5Q的溶解速率,提高了电池的循环稳定性。P5Q/CMK-3复合材料100次充放电循环后容量为300 mAh·g^-1,保持率高达71%,说明了该优化方法效果显著,提高了P5Q在锂离子电池中的实际应用价值。     

单壁碳纳米管提升正极复合材料杯[4]醌/介孔炭CMK-3储锂性能

将杯[4]醌(Calix[4]quinone,C4Q)通过灌注法与有序介孔炭CMK-3制备成纳米复合材料,可抑制其在常规有机电解液中的溶解。 为了进一步提升其电化学性能,本文在C4Q/CMK-3复合材料中加入单壁碳纳米管(SWCNTs),减少了CMK-3的用量,并代替导电炭黑Super-P作为导电剂,通过脱泡搅拌法制备了C4Q/CMK-3/SWCNTs复合材料。 研究表明,当m(C4Q)：m(CMK-3)：m(SWCNTs)为1：1：1时,电化学性能最佳,0.1 C电流密度下循环100圈后,电池的容量保持为238.7 mA·h/g,当电流密度增大到1 C时,放电容量仍有260 mA·h/g,这是由于SWCNTs在复合材料C4Q/CMK-3中构建了三维导电网络,增强了电极的稳定性,降低了电池内阻,从而提升了电池的循环性能与倍率性能。     

Versatile nanocomposites in phosphoproteomics: A review

Protein phosphorylation is one of the most important post-translational modifications. Phosphorylated peptides are present in low abundance in blood serum but play a vital role in regulatory mechanisms and may serve as casual factors in diseases. The enrichment and analysis of phosphorylated peptides directly from human serum and mapping the phosphorylation sites is a challenging task. Versatile nanocomposites of different materials have been synthesized using simple but efficient methodologies for their enrichment. The nanocomposites include magnetic, coated, embedded as well as chemically derivatized materials. Different base materials such as polymers, carbon based and metal oxides are used. The comparison of nanocomposites with respective nanoparticles provides sufficient facts about their efficiency in terms of loading capacity and capture efficiency. The cost for preparing them is low and they hold great promise to be used as chromatographic materials for phosphopeptide enrichment. This review gives an overview of different nanocomposites in phosphoproteomics, discussing the improved efficiency than the individual counterparts and highlighting their significance in phosphopeptide enrichment.     

A novel polyaniline/mesoporous carbon nano-composite electrode for asymmetric supercapacitor

<正>A novel nano-composite of polyaniline/mesoporous carbon(PANI/CMK-3) was prepared with mesoporous carbon(CMK-3) serving as the support.Electrochemical asymmetric capacitors have been successfully designed by using PANI/CMK-3 composite and CMK-3 as positive and negative electrode,respectively.The results showed that the discharge capacity of the asymmetric capacitor could reach 87.4 F/g under the current density of 5 mA/cm~2 and cell voltage of 1.4 V.The energy density of the asymmetric capacitor was up to 23.8 Wh/kg with a power density of 206 W/kg.Furthermore,PANI/CMK-3-CMK-3 asymmetric capacitor using this PANI/CMK-3 nano-composite could be activated quickly and possess high charge-discharge efficiency.     

ZnO-SnO2纳米复合氧化物的制备、表征及其气敏性质的研究(英)

本文用可控湿化学共沉淀法研制了ZnO-SnO₂纳米晶体复合气敏材料并考察其对有毒气体CO和NO₂的气敏性质。用TEM、BET和XRD等方法表征了纳米复合物的粒度、形貌、比表面、热稳定性和相稳定性。研究了制备的可控参数，如金属阳离子总浓度、沉淀pH值和老化时间等对复合物气敏性质的影响。研究结果表明，该纳米复合氧化物具有化学均一性，高度热稳定和相稳定性，对CO和NO₂具有高的灵敏度和选择性，其气敏性质依赖于复合物组成、焙烧温度和操作温度。通过2wt％金属Cd的掺杂和10wt% Al2O3氧化物的表面包覆大大提高了气体的灵敏度和选择性。用程序升温吸脱附研究了纳米复合物表面对气体的吸脱附性能，并探讨了气敏机理。     

双孔道管状有序介孔炭对维生素B12的吸附缓释性能

通过纳米铸型法,以硅基介孔分子筛SBA-15为模板,糠醇为碳源,草酸作为聚合催化剂合成了具有双孔道管状有序介孔炭CMK-5.利用粉末X射线衍射(XRD)、扫描电子显微镜(SEM)和氮气物理吸附法等对其结构进行了表征.结果表明合成的CMK-5具有有序结构,比表面积和孔容积分别高达1856 m2·g-1和2.10 cm3·g-1,在3.1和5.5nm具有集中的双孔分布.由于独特的双孔道结构特点,CMK-5在120 min内快速吸附维生素B12至平衡,吸附量高达943 mg·g-1,远高于商用活性炭.CMK-5吸附维生素B12后可以直接用于缓释,动态缓释浓度维持在～9 mg·L-1,适用于维生素B12分子在人体内的缓释.     

化学气相沉积法合成Fe/CMK-5及其对溶菌素的吸附性能

以SBA-15为模板,二茂铁为碳源,利用化学气相沉积(CVD)法合成了Fe/CMK-5复合材料.用粉末X射线衍射、低温N2吸附、热重分析、透射电镜等对复合材料进行了表征.结果表明复合材料中碳以CMK-5结构存在,Fe颗粒均匀地分布在CMK-5的骨架中,通过调节CVD时间可改变Fe/CMK-5的结构参数.在pH值为11的缓冲溶液中研究了Fe/CMK-5系列复合材料对溶菌素(lysozyme)的吸附性能,考察了溶菌素在Fe/CMK-5孔道内部的结构稳定性以及在不同pH值溶液中的泄露量.     

Synthesis and characterization of nanocast silica NCS-1 with CMK-3 as a template

Nanocast silica (NCS-1) was synthesized by a casting process by employing the mesoporous carbon CMK-3 (the replica of SBA-15) as a template, tetraethoxysilane (TEOS) as the silica source, and hydrochloric acid (HCl) as the catalyst. The ordered carbon template was removed by employing different methods, such as calcination, thermal treatment followed by calcination, and controlled combustion. According to XRD and TEM characterization, NCS-1 exhibits an ordered structure with hexagonal symmetry and retains the morphology of the original SBA-15 used for the synthesis of CMK-3 over two replication steps on the nanometer scale. This demonstrates the well-connected porosity in CMK-3 type carbon, which can be used as a mold to synthesize mesostructured materials. The nitrogen adsorption isotherms generally show type IV shape, indicating mesoporous characteristics. The structure of NCS-1 is strongly influenced by variables of the nanocasting process, such as the loading amount of silica, hydrolysis temperature, and carbon removal methods. The surface area, pore size, and pore volume of NCS-1 can be tuned to a certain range by varying these parameters.     

电化学方法制备高分散Pt/CMK-3及其对甲醇电化学催化性能

采用直接电化学还原法在介孔碳(CMK-3)载体上直接电沉积高分散的铂纳米颗粒,制备CMK-3复合铂纳米颗粒电极(Pt/CMK-3)。 通过透射电子显微镜分析发现,铂纳米颗粒非常均匀的分布在CMK-3上,平均粒径约5 nm。 通过循环伏安测试,分析了催化剂不同负载铂含量时氯铂酸的利用率,在理论铂质量分数为20%时,这种方法制备的Pt/CMK-3所使用的氯铂酸的利用率最高,在1 mol/L CH3OH+0.5 mol/L H2SO4溶液中循环伏安测试电流密度达到382 A/g。 在相同实验条件下,Pt/CMK-3电极对甲醇电催化活性远高于Pt/XC-72(炭黑)电极和用常规电沉积方法制备的Pt/CMK-3电极。     

Ordered mesoporous carbon as an efficient and reversible adsorbent for the adsorption of fullerenes

An ordered mesoporous carbon, CMK-3, was synthesized using a mesoporous siliceous material, SBA-15, as the template. CMK-3 was characterized and used for the adsorption of fullerenes C60 and C70. It was found that the adsorption capacity of CMK-3 is 4 times higher than that of activated carbon. The adsorption equilibrium isotherms of C60 and C70 on CMK-3 were studied for both single and binary systems. The reversibility of fullerene adsorption on CMK-3 was also explored. The results showed that CMK-3 is an effective and reversible adsorbent for the separation of fullerenes by adsorption.     

不同孔径的介孔碳分子筛对VB12的吸附性质研究

摘要利用SBA-15为模板, 在不同温度下合成了孔径大小在3.7(CMK-3-100)和6-3 nm(CMK-3-150)之间的介孔碳， 以其作为吸附剂, 研究了它们在水溶液中对VB12的吸附作用. 结果表明, CMK-3-130与CMK-3-100和CMK-3-150相比， 表现出对VB12最大的吸附能力(吸附能力为412.5 mg/g), 这是因为它有比较高的有序结构和比较大的孔容.     

Processing and Final Properties Improvement of Polyolefin-Sepiolite and Carbon Nanofibre Nanocomposites

Summary: In this work polypropylene (PP) nanocomposites with different nanofillers (sepiolites and carbon nanofibres) have been produced, processed by injection moulding and fibre spinning and analyzed in terms of mechanical properties improvements. Different concentrations of both fillers were used in nanocomposites preparation. The influence of nanofiller type and amount on mechanical properties were analyzed and discussed for each process studied. This study was completed with a basic morphological characterization in order analyze the nanofiller dispersion, distribution and orientation in the nanocomposites. The results achieved show that it is possible to obtain a good dispersion and distribution of the each kind of nanofillers with conventional processing methodologies when the nanofiller concentration is small. Moreover the nanocomposites obtained had better properties than the starting polymers, showing that sepiolite and carbon nanofiller are able to provide an important contribution to the improvement of mechanical properties of the materials analyzed, enlarging the final application possibilities of PP based products.     

Chromium-based metal–organic framework/mesoporous carbon composite: synthesis,characterization and CO<Subscript>2</Subscript> adsorption

New composites of a water-stable chromium-based metal organic framework MIL-101 and mesoporous carbon CMK-3 were in situ synthesized with different ratios of MIL-101 and CMK-3 using the hydrothermal method. The composites as well as the parent materials were characterized by X-ray diffraction, thermo gravimetric analysis, scanning electron microscope, transmission electron microscope and nitrogen/carbon dioxide adsorption isotherms. The hybrid material possesses the same crystal structure and morphology as its parent MIL-101, and exhibits an enhancement in CO₂ adsorption uptakes when compared to MIL-101 and CMK-3. The increase in CO₂ uptakes was attributed to the combined effect of the formation of additional micropores, the enhancement of micropore volume and the activation of unsaturated metal sites by CMK-3 incorporation.     

Industrially produced PET nanocomposites with enhaced properties for food packaging applications

Gas permeation of polymers is one of the important factors to be considered in the selection of materials for many packaging applications, such as modified atmosphere packaging (MAP) for foods. Poly (ethylene therephthalate) (PET) is known to exhibit very low gas permeation compared with most polymers such as polystyrene, polyethylene and polypropylene. However, MAP applications require better barrier performance than that of PET. In the present work PET trays reinforced with organically modified sepiolite, fibrillar nanoclay, have been produced at industrial processes. Permeability to water vapour, oxygen and carbon dioxide has been studied in PET nanocomposites as well as their microstructure through transmission electron and scanning electronic microscopy (TEM and SEM), and their mechanical properties. Results show a better performance in barrier properties as well as an increase in tensile strength, and impact resistance when the sepiolite content is lower than 2.5%.     

Sulfur-doped CMK-5 with expanded lattice for high-performance lithium ion batteries

Heteroatom-doped porous carbon materials are very attractive for lithium ion batteries (LIBs) owing to their high specific surface areas, open pore structures, and abundant active sites. However, heteroatom-doped porous carbon with very high surface area and large pore volume are highly desirable but still remain a big challenge. Herein, we reported a sulfur-doped mesoporous carbon (CMK-5-S) with nanotubes array structure, ultrahigh specific surface area (1390 m²/g), large pore volume (1.8 cm³/g), bimodal pore size distribution (2.9 and 4.6 nm), and high sulfur content (2.5 at%). The CMK-5-S used as an anode material for LIBs displays high specific capacity, excellent rate capability and highly cycling stability. The initial reversible specific capacity at 0.1 A/g is as high as 1580 mAh/g and simultaneously up to 701 mAh/g at 1 A/g even after 500 cycles. Further analysis reveals that the excellent electrochemical storage performances is attributed to its unique structures as well as the expanded lattice by sulfur-doping.     

Reduced graphene oxide-porous In2O3 nanocubes hybrid nanocomposites for room-temperature NH3 sensing

Metal oxide semiconductors (MOS)-reduced graphene oxide (rGO) nanocomposites have attracted great attention for room-temperature gas sensing applications. The development of novel sensing materials is the key issue for the effective detection of ammoniagas at room temperature. In the present work, the novel reduced graphene oxide (rGO)-In₂O₃ nanocubes hybrid materials have been prepared via a simple electrostatic self-assembly strategy. Characterization results exhibit that the intimate interfacial contact between In₂O₃ nanocubes and the rGO sheets are achieved. Particularly, the as-prepared rGO/In₂O₃ nanocomposites displayed high sensitivity, fast response and excellent selectivity towards ammonia (NH₃) at room-temperature, which clearly uncovers the merit of structural design and rational integration with rGO sheets. The superior gas sensing performance of the rGO/In₂O₃ nanocomposites can be attributed to the synergetic effects of rGO sheets and porous In₂O₃ nanocubes. The reported synthesis offers a general approach to rGO/MOS-based semiconductor composites for room-temperature gas sensing applications.