Synthesis, structure, photophysical and electrochemiluminescence properties of Re(I) tricarbonyl complexes incorporating pyrazolyl-pyridyl-based ligands

Three rhenium carbonyl complexes 1-3 were synthesized by reaction of the appropriate bidentate pyrazolyl-pyridyl-based ligand L1, L2 (L1 = 2-[1-{4-(bromomethyl)benzyl}-1H-pyrazol-3-yl]pyridine; L2 = 1,4-bis(3-(2-pyridyl)pyrazol-1-ylmethyl)benzene) with [Re(CO)(5)Cl] in toluene. They were characterized by elemental analyses, ESI-MS, (1)H spectroscopy, and X-ray crystallography for 1 and 2. Compounds 1-3 exhibit bright yellow-green luminescence in the solid state and in solution at 298 K with the lifetimes in the microsecond range. It is noteworthy that the luminescent quantum efficiencies of compounds 1-3 are between 0.040 and 0.051, which are much higher than that of the [Re(bpy)(CO)(3)Cl] complex (= 0.019) (M. M. Richter et al., Anal. Chem., 1996, 68, 4370; J. Van Houten et al., J. Am. Chem. Soc., 1976, 98, 4853). Electrogenerated chemiluminescence (ECL) was observed in solutions of these complexes in the absence or presence of coreactant tri-n-propylamine (TPrA) or 2-(dibutylamino)ethanol (DBAE) by stepping the potential of a Pt disk working electrode. The ECL spectra are identical to the photoluminescence spectra, indicating that the chemical reactions following electrochemical oxidation or reduction form the same (3)MLCT excited states as that generated in the photoluminescence experiments. In most cases, the ECL quantum efficiencies of complexes 1-3 are comparable to that of the [Re(L)(CO)(3)Cl] (L = bpy or phen) system. Oxygen tends to substantially decrease ECL intensities of the three rhenium complexes-TPrA system, which could allow them to be used as oxygen sensors.     

Highly stable ECL active films formed by the electrografting of a diazotized ruthenium complex generated in situ from the amine

The electrodeposition of the electrochemiluminescent (ECL) ruthenium complex, bis(2,2'-bipyridyl)(4'-(4-aminophenyl)-2,2'-bipyridyl)ruthenium(II), [Ru(bpy)(2)(apb)](2+), via the in situ formation of a diazonium species from aqueous media is reported. Surface characterization undertaken using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) determined that the layer is bound to the substrate via azo bonding. The layer displays good ECL activity and is stable over a long period of time. The excellent potential of this system for ECL sensing applications is demonstrated using the well-known ECL coreactant 2-(dibutylamino)ethanol (DBAE) as a model analyte, which can be detected to a level of 10 nM with a linear range between 10(-8) and 10(-4) M.     

Mono- and dinuclear Ru(II) complexes of 1,4-bis(3-(2-pyridyl)pyrazol-1-ylmethyl)benzene): synthesis, structure, photophysical properties and electrochemiluminescent determination of diuretic furosemide

Mononuclear ruthenium complex 1 and dinuclear complex 2 were synthesized by reaction of the appropriate bidentate pyrazolyl-pyridyl-based ligand L (L = 1,4-bis(3-(2-pyridyl)pyrazol-1-ylmethyl)benzene) with cis-Ru(bipy)(2)Cl(2)·2H(2)O. They were characterized by elemental analyses, ESI-MS, (1)H spectroscopy, and X-ray crystallography for 2. Compounds 1 and 2 both emit strongly in solid states and in solutions at 298 K with the lifetimes in the microsecond range. Electrogenerated chemiluminescence (ECL) of complexes 1 and 2 in the absence or presence of coreactant tri-n-propylamine (TPrA) or 2-(dibutylamino)ethanol (DBAE) at different working electrodes in acetonitrile and phosphate buffer solutions (PBS, pH 7.5) was studied. The ECL spectra are identical to the photoluminescence spectra, indicating that the ECL emissions are due to the metal to ligand charge transfer (MLCT). In all cases, ECL quantum efficiencies of dinuclear complex 2 are higher than those of mononuclear complex 1, and ECL quantum efficiencies of complexes 1 and 2/TPrA system are higher than those of DBAE system. It is noted that diuretic furosemide tends to decrease the ECL intensity of complex 2/TPrA system in PBS (pH 7.5) at GC working electrode. A novel ECL method for the determination of diuretic furosemide was developed with a linear range between 2.0 × 10(-7) mol L(-1) and 1.0 × 10(-6) mol L(-1), and a detection limit of 1.2 × 10(-8) mol L(-1) based on 3 times the ratio of signal-to-noise.     

Examination of the silver colloid binding behavior of disulfide-tethered bipyridine ligands and their fac-tricarbonylrheniumI complexes

The syntheses of 2,2'-bipyridin-5-ylmethyl-5-(1,2-dithiolan-3-yl)pentanoate (L1) and N-(2,2'-bipyridin-5-ylmethyl)-5-(1,2-dithiolan-3-yl)pentanamide (L2) and their neutral fac carbonylrhenium(I) complexes [Re(L1)(CO)(3)Br] and [Re(L2)(CO)(3)Br] are reported. The electronic absorption and emission spectra of the complexes are similar to the spectrum of the reference compound [Re(bipy)(CO)(3)Br] and correlate well with the density functional theory calculations undertaken. The surface-enhanced Raman spectroscopy (SERS) spectra (excited at both 532 and 785 nm) of the ligands and complexes were examined and compared to the spectrum of ethyl 5-(1,2-dithiolan-3-yl)pentanoate (L3), revealing that there is very little contribution to the spectra of these species from the dithiolated alkyl chains. The spectra are dominated by the characteristic peaks of a metalated 2,2'-bipyridyl group, arising from the silver colloid/ion complexation, and the rhenium center. The rhenium complexes show weak SERS bands related to the CO stretches and a broad band at 510 cm(-1) assigned to Re-CO stretching. Concentration-dependent studies, measured by the relative intensity of several assigned peaks, indicate that, as the surface coverage increases, the bipyridine moiety lifts off the surface. In the case of L1 and L2, this gives rise to complexes with silver at low concentration, enhancing the signals observed, while for the tricarbonylbromorhenium complexes of these ligands, the presence of the disulfide tether allows an enhancement in the limits of detection of these surface-borne species of 20 times in the case of [ReL2(CO)(3)Br] over [Re(bipy)(CO)(3)Br].     

Ruthenium(II) 2,2'-Bipyridyl tetrakis acetonitrile undergoes selective axial photocleavage

The complex [Ru(bpy)(AN)4]2+ (bpy = 2,2'-bipyridyl, AN = acetonitrile) has a Ru(II) --> pi(*)(bpy) MLCT band at 388 nm. Upon irradiation on this absorption band, the compound undergoes total regioselective photocleavage yielding complexes fac-[Ru(bpy)(AN)(3)(H(2)O)](2+) and trans-[Ru(bpy)(AN)(2)(H(2)O)(2)](2+) in two consecutive steps with quantum yields of 0.43 and 0.09, respectively. This behavior is a consequence of the stronger sigma-donor ability of the bpy nitrogens that determines the orbital ordering and therefore the nature of the lowest lying 3d-d state responsible for the photochemistry. The two-step photoreaction, which can be followed by UV-vis and NMR spectra, provides a quantitative path to the preparation of trans-polypyridine species with potentially interesting photochemical properties.     

Syntheses of group 7 metal carbonyl complexes with a stable N-heterocyclic chlorosilylene

Two structurally characterized manganese [L(2)Mn(CO)(4)](+)[Mn(CO)(5)](-) (1) and rhenium [L(3)Re(CO)(3)](+)[ReCO)(5)](-) (2) silylene complexes were prepared in one pot syntheses by reacting 1 equivalent of Mn(2)(CO)(10) with 2 equivalents of stable N-heterocyclic chlorosilylene L {L = PhC(NtBu)(2)SiCl} and 1 equivalent of Re(2)(CO)(10) with 3 equivalents of L in toluene at room temperature. Both complexes 1 and 2 were characterized by single-crystal X-ray structural analysis, NMR and IR spectroscopy, EI-MS spectrometry, and elemental analysis.     

(S)-(2-(2'-Pyridyl)ethyl)cysteamine and (S)-(2-(2'-pyridyl)ethyl)-d,l-homocysteine as ligands for the "fac-[M(CO)(3)](+)" (M = Re, (99m)Tc) core

The reaction of fac-[NEt(4)](2)[Re(CO)(3)Br(3)] with (S)-(2-(2'-pyridyl)ethyl)cysteamine, L(1), in methanol leads to the formation of the cationic fac-[Re(CO)(3)(NSN)][Br] complex, 1, with coordination of the nitrogen of the pyridine, the sulfur of the thioether, and the nitrogen of the primary amine. When fac-[NEt(4)](2)[Re(CO)(3)Br(3)] reacts with the homocysteine derivative (S)-(2-(2'-pyridyl)ethyl)-d,l-homocysteine, L(2), the neutral fac-Re(CO)(3)(NSO) complex, 2, is produced with coordination of the nitrogen of the primary amine, the sulfur of the thioether, and the oxygen of the carboxylate group, while the pyridine ring remains uncoordinated. The analogous technetium-99m complexes, 1' and 2', were also prepared quantitatively by the reaction of L(1) and L(2) with the fac-[(99m)Tc(CO)(3)(H(2)O)(3)](+) precursor at 70 degrees C in water. Given that both (S)-(2-(2'-pyridyl)ethyl)cysteamine and homocysteine can be easily N- or S-derivatized by a bioactive molecule of interest, both the NSN or NSO ligand systems could be used to develop target-specific radiopharmaceuticals for diagnosis and therapy.     

Involvement of a binuclear species with the Re-C(O)O-Re moiety in CO2 reduction catalyzed by tricarbonyl rhenium(I) complexes with diimine ligands: strikingly slow formation of the Re-Re and Re-C(O)O-Re species from Re(dmb)(CO)3S (dmb = 4,4'-dimethyl-2,2'-bipyridine, S = solvent)

Excited-state properties of fac-[Re(dmb)(CO)(3)(CH(3)CN)]PF(6), [Re(dmb)(CO)(3)](2) (where dmb = 4,4'-dimethyl-2,2'-bipyridine), and other tricarbonyl rhenium(I) complexes were investigated by transient FTIR and UV-vis spectroscopy in CH(3)CN or THF. The one-electron reduced monomer, Re(dmb)(CO)(3)S (S = CH(3)CN or THF), can be prepared either by reductive quenching of the excited states of fac-[Re(dmb)(CO)(3)(CH(3)CN)]PF(6) or by homolysis of [Re(dmb)(CO)(3)](2). In the reduced monomer's ground state, the odd electron resides on the dmb ligand rather than on the metal center. Re(dmb)(CO)(3)S dimerizes slowly in THF, k(d) = 40 +/- 5 M(-1) s(-1). This rate constant is much smaller than those of other organometallic radicals which are typically 10(9) M(-1) s(-1). The slower rate suggests that the equilibrium between the ligand-centered and metal-centered radicals is very unfavorable (K approximately 10(-4)). The reaction of Re(dmb)(CO)(3)S with CO(2) is slow and competes with the dimerization. Photolysis of [Re(dmb)(CO)(3)](2) in the presence of CO(2) produces CO with a 25-50% yield based on [Re]. A CO(2) bridged dimer, (CO)(3)(dmb)Re-CO(O)-Re(dmb)(CO)(3) is identified as an intermediate. Both [Re(dmb)(CO)(3)](2)(OCO(2)) and Re(dmb)(CO)(3)(OC(O)OH) are detected as oxidation products; however, the previously reported formato-rhenium species is not detected.     

Enhanced electrochemiluminescence sensor from tris(2,2'-bipyridyl)ruthenium(II) incorporated into MCM-41 and an ionic liquid-based carbon paste electrode

The electrochemiluminescence (ECL) of tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)(2+)] ion-exchanged in the sulfonic-functionalized MCM-41 silicas was developed with tripropylamine (TPrA) as a co-reactant in a carbon paste electrode (CPE) using a room temperature ionic liquid (IL) as a binder. The sulfonic-functionalized silicas MCM-41 were used for preparing an ECL sensor by the electrostatic interactions between Ru(bpy)(3)(2+) cations and sulfonic acid groups. We used the IL as a binder to construct the CPE (IL-CPE) to replace the traditional binder of the CPE (T-CPE)--silicone oil. The results indicated that the MCM-41-modified IL-CPE had more open structures to allow faster diffusion of Ru(bpy)(3)(2+) and that the ionic liquid also acted as a conducting bridge to connect TPrA with Ru(bpy)(3)(2+) sites immobilized in the electrode, resulting in a higher ECL intensity compared with the MCM-41-modified T-CPE. Herein, the detection limit for TPrA of the MCM-41-modified IL-CPE was 7.2 nM, which was two orders of magnitude lower than that observed at the T-CPE. When this new sensor was used in flow injection analysis (FIA), the MCM-41-modified IL-CPE ECL sensor also showed good reproducibility. Furthermore, the sensor could also be renewed easily by mechanical polishing whenever needed.     

Ultrafast excited state dynamics controlling photochemical isomerization of N-methyl-4-[trans-2-(4-pyridyl)ethenyl]pyridinium coordinated to a {Re I(CO)3(2,2'-bipyridine)} chromophore

Two multifunctional photoactive complexes [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) and [Re(MeDpe(+))(CO)(3)(bpy)](2+) (MeDpe(+)=N-methyl-4-[trans-2-(4-pyridyl)ethenyl]pyridinium, bpy=2,2'-bipyridine) were synthesized, characterized, and their redox and photonic properties were investigated by cyclic voltammetry; ultraviolet-visible-infrared (UV/Vis/IR) spectroelectrochemistry, stationary UV/Vis and resonance Raman spectroscopy; photolysis; picosecond time-resolved absorption spectroscopy in the visible and infrared regions; and time-resolved resonance Raman spectroscopy. The first reduction step of either complex occurs at about -1.1 V versus Fc/Fc(+) and is localized at MeDpe(+). Reduction alone does not induce a trans-->cis isomerization of MeDpe(+). [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) is photostable, while [Re(MeDpe(+))(CO)(3)(bpy)](2+) and free MeDpe(+) isomerize under near-UV irradiation. The lowest excited state of [Re(Cl)(CO)(3)(MeDpe(+))(2)](2+) has been identified as the Re(Cl)(CO)(3)-->MeDpe(+ 3)MLCT (MLCT=metal-to-ligand charge transfer), decaying directly to the ground state with lifetimes of approximately 42 (73 %) and approximately 430 ps (27 %). Optical excitation of [Re(MeDpe(+))(CO)(3)(bpy)](2+) leads to population of Re(CO)(3)-->MeDpe(+) and Re(CO)(3)-->bpy (3)MLCT states, from which a MeDpe(+) localized intraligand (3)pipi* excited state ((3)IL) is populated with lifetimes of approximately 0.6 and approximately 10 ps, respectively. The (3)IL state undergoes a approximately 21 ps internal rotation, which eventually produces the cis isomer on a much longer timescale. The different excited-state behavior of the two complexes and the absence of thermodynamically favorable interligand electron transfer in excited [Re(MeDpe(+))(CO)(3)(bpy)](2+) reflect the fine energetic balance between excited states of different orbital origin, which can be tuned by subtle structural variations. The complex [Re(MeDpe(+))(CO)(3)(bpy)](2+) emerges as a prototypical, multifunctional species with complementary redox and photonic behavior.     

pH-Dependent spectroscopic and luminescent properties, and metal-ion recognition studies of Re(I) complexes containing 2-(2'-pyridyl)benzimidazole and 2-(2'-pyridyl)benzimidazolate

A series of Re(I) complexes, [Re(CO)(3)Cl(HPB)] (1), [Re(CO)(3)(PB)H(2)O] (2), [Re(CO)(3)(NO(3))(PB-AuPPh(3))] (3), and [Re(CO)(3)(NO(3))(PB)Au(dppm-H)Au](2) (4) [HPB = 2-(2'-pyridyl)benzimidazole; dppm = 2,2'-bis(diphenylphosphinomethane)], have been synthesized and characterized by X-ray diffraction. Complex 1, which exhibits interesting pH-dependent spectroscopic and luminescent properties, was prepared by reacting Re(CO)(5)Cl with an equimolar amount of 2-(2'-pyridyl)benzimidazole. The imidazole unit in complex 1 can be deprotonated to form the imidazolate unit to give complex 2. Addition of 1 equiv of AuPPh(3)(NO(3)) to complex 2 led to the formation of a heteronuclear complex 3. Addition of a half an equivalent of dppm(Au(NO(3)))(2) to complex 2 yielded 4. In both 3 and 4, the imidazolate unit acts as a multinuclear bridging ligand. Complex 4 is a rare and remarkable example of a Re(2)Au(4) aggregate in combination with μ(3)-bridging 2-(2'-pyridyl)benzimidazolate. Finally, complex 2 has been used to examine the Hg(2+)-recognition event among group 12 metal ions. Its reversibility and selectivity toward Hg(2+) are also examined.     

Rhenium(I)-induced cyclization of thiosemicarbazones derived from beta-keto esters

The reactions of methylacetoacetate and ethyl 2-methylacetoacetate thiosemicarbazones (H(2)L(A) and H(2)L(B), respectively) with [ReX(CO)(5)] and [ReX(CO)(3)(CH(3)CN)(2)] (X = Cl, Br) were explored under various experimental conditions. Besides the adducts fac-[ReX(CO)(3)(H(2)L)], in which the rhenium is coordinated to three carbonyl groups, the X anion, and the N,S-bidentate thiosemicarbazone ligand, the following complexes were also isolated: fac-[ReBr(CO)(3)(Hpyz(B))], the tetrameric complexes fac-[Re(pyz(A))(CO)(3)](4) and fac-[Re(pyz(B))(CO)(3)](4), and fac-[Re(pyz(B))(CO)(3)(H(2)O)] (where Hpyz(A) and Hpyz(B) are pyrazolones derived by cyclization of H(2)L(A) and H(2)L(B), respectively). The cyclization reactions were monitored by (1)H NMR spectroscopy and the complexes isolated were identified by elemental analysis, mass spectrometry, IR and (1)H NMR spectroscopy, and in some cases by X-ray diffractometry. The isolation and the full structural identification of the rather unusual fac-[ReBr(CO)(3)(Hpyz(B))], which contains the enol form of the pyrazolone ligand, affords new insight into the cyclization of thiosemicarbazones derived from beta-keto esters.     

Tuning the reactivity in classic low-spin d6 rhenium(I) tricarbonyl radiopharmaceutical synthon by selective bidentate ligand variation (L,L'-Bid; L,L'= N,N', N,O, and O,O' donor atom sets) in fac-[Re(CO)3(L,L'-Bid)(MeOH)]n complexes

A range of fac-[Re(CO)(3)(L,L'-Bid)(H(2)O)](n) (L,L'-Bid = neutral or monoanionic bidentate ligands with varied L,L' donor atoms, N,N', N,O, or O,O': 1,10-phenanthroline, 2,2'-bipydine, 2-picolinate, 2-quinolinate, 2,4-dipicolinate, 2,4-diquinolinate, tribromotropolonate, and hydroxyflavonate; n = 0, +1) has been synthesized and the aqua/methanol substitution has been investigated. The complexes were characterized by UV-vis, IR and NMR spectroscopy and X-ray crystallographic studies of the compounds fac-[Re(CO)(3)(Phen)(H(2)O)]NO(3)·0.5Phen, fac-[Re(CO)(3)(2,4-dQuinH)(H(2)O)]·H(2)O, fac-[Re(CO)(3)(2,4-dQuinH)Py]Py, and fac-[Re(CO)(3)(Flav)(CH(3)OH)]·CH(3)OH are reported. A four order-of-magnitude of activation for the methanol substitution is induced as manifested by the second order rate constants with (N,N'-Bid) < (N,O-Bid) < (O,O'-Bid). Forward and reverse rate and stability constants from slow and stopped-flow UV/vis measurements (k(1), M(-1) s(-1); k(-1), s(-1); K(1), M(-1)) for bromide anions as entering nucleophile are as follows: fac-[Re(CO)(3)(Phen)(MeOH)](+) (50 ± 3) × 10(-3), (5.9 ± 0.3) × 10(-4), 84 ± 7; fac-[Re(CO)(3)(2,4-dPicoH)(MeOH)] (15.7 ± 0.2) × 10(-3), (6.3 ± 0.8) × 10(-4), 25 ± 3; fac-[Re(CO)(3)(TropBr(3))(MeOH)] (7.06 ± 0.04) × 10(-2), (4 ± 1) × 10(-3), 18 ± 4; fac-[Re(CO)(3)(Flav)(MeOH)] 7.2 ± 0.3, 3.17 ± 0.09, 2.5 ± 2. Activation parameters (ΔH(k1)(++), kJmol(-1); ΔS(k1)(), J K(-1) mol(-1)) from Eyring plots for entering nucleophiles as indicated are as follows: fac-[Re(CO)(3)(Phen)(MeOH)](+) iodide 70 ± 1, -35 ± 3; fac-[Re(CO)(3)(2,4-dPico)(MeOH)] bromide 80.8 ± 6, -8 ± 2; fac-[Re(CO)(3)(Flav)(MeOH)] bromide 52 ± 5, -52 ± 15. A dissociative interchange mechanism is proposed.     

Reactivity of [Re[kappa(3)-H(mu-H)B(tim(Me))(2)](CO)(3)] (tim(Me) = 2-mercapto-1-methylimidazolyl) toward neutral substrates

The complex [Re[kappa(3)-H(mu-H)B(tim(Me))(2)](CO)(3)] (2a) (tim(Me) = 2-mercapto-1-methylimidazolyl) reacts with a variety of neutral substrates to afford new complexes featuring the dihydrobis(2-mercapto-1-methylimidazolyl)borate coordinated in a bidentate or unidentate fashion. By treating 2a with unidentate ligands, the mononuclear complexes [Re[kappa(2)-H(2)B(tim(Me))(2)](CO)(3)(L)] (L = imidazole (5), 4-(dimethylamino)pyridine (6), tert-butylisonitrile (7), triphenylphosphine (8)) were formed, upon replacement of the agostic B-H...Re bond by the correspondent unidentate ligand. With potentially bidentate substrates, 2a is transformed into mononuclear or dinuclear complexes, depending on the atom donor set of the reacting substrates. Reaction of compound 2a with ethylenediamine (en) gave the complex [Re[kappa(1)-H(2)B(tim(Me))(2)](CO)(3)(en)] (9), because of cleavage of the agostic interaction, dechelation of one mercaptoimidazolyl ring, and bidentate coordination of the amine. By contrast, 1,2-bis(diphenyl)phosphinoethane (dppe) is not able to replace the mercaptoimidazolyl ring, and the dimer [Re[kappa(2)-H(2)B(tim(Me))(2)](CO)(3)](2)(mu-dppe) (10) was formed. The novel Re(I) tricarbonyl complexes (5-10) have been fully characterized, including by X-ray diffraction analysis in the case of 6, 8, 9, and 10. The X-ray diffraction study confirmed the unprecedented unidentate coordination mode of the dihydrobis(2-mercapto-1-methylimidazolyl)borate in complex 9.     

Transition metal complexes bearing a 2,2-bis(3,5-dimethylpyrazol-1-yl)propionate ligand: one methyl more matters

The new N,N,O ligand 2,2-bis(3,5-dimethylpyrazol-1-yl)propionic acid (2,2-Hbdmpzp) (2) and its transition metal complexes [Mn(2,2-bdmpzp)(CO)(3)] (3), [Re(2,2-bdmpzp)(CO)(3)] (4), [Cu(2,2-bdmpzp)(2)] (5), and [Ru(2,2-bdmpzp)Cl(L)(PPh(3))] [L = PPh(3) (6), N(2) (7), CO (8a/b), SO(2) (9a/b)] have been synthesized, characterized and compared to analogous complexes bearing a bis(3,5-dimethylpyrazol-1-yl)acetic acid. It was found that the additional methyl group has a remarkable influence on the stability and reactivity of transition metal complexes.     

New synthetic routes to biscarbonylbipyridinerhenium(I) complexes cis,trans-[Re(X2bpy)(CO)2(PR3)(Y)n+ (X2bpy = 4,4'-X2-2,2'-bipyridine) via photochemical ligand substitution reactions, and their photophysical and electrochemical properties

Photochemical ligand substitution of fac-[Re(X2bpy)(CO)3(PR3)]+ (X2bpy = 4,4'-X2-2,2'-bipyridine; X = Me, H, CF3; R = OEt, Ph) with acetonitrile quantitatively gave a new class of biscarbonyl complexes, cis,trans[Re(X2bpy)(CO)2(PR3)(MeCN)]+, coordinated with four different kinds of ligands. Similarly, other biscarbonylrhenium complexes, cis,trans-[Re(X2bpy)(CO)2(PR3)(Y)]n+ (n = 0, Y = Cl-; n = 1, Y = pyridine, PR'3), were synthesized in good yields via photochemical ligand substitution reactions. The structure of cis,trans-[Re(Me2bpy)(CO)2[P(OEt)3](PPh3)](PF6) was determined by X-ray analysis. Crystal data: C38H42N2O5F6P3Re, monoclinic, P2(1/a), a = 11.592(1) A, b = 30.953(4) A, c = 11.799(2) A, V = 4221.6(1) A3, Z = 4, 7813 reflections, R = 0.066. The biscarbonyl complexes with two phosphorus ligands were strongly emissive from their 3MLCT state with lifetimes of 20-640 ns in fluid solutions at room temperature. Only weak or no emission was observed in the cases Y = Cl-, MeCN, and pyridine. Electrochemical reduction of the biscarbonyl complexes with Y = Cl- and pyridine in MeCN resulted in efficient ligand substitution to give the solvento complexes cis,trans-[Re(X2bpy)(CO)2(PR3)(MeCN)]+.     

Structural investigations into the deactivation pathway of the CO2 reduction electrocatalyst Re(bpy)(CO)3Cl

We report a series of complexes synthesized from the chemical reduction of the fac-tricarbonyl complex Re(bpy)(CO)(3)Cl. Synthesis and characterization of [Re(bpy)(CO)(3)](2), [Re(bpy)(CO)(3)](2)(-), and Re(bpy)(CO)(3)(-) are presented. The Re(bpy)(CO)(3)(-) anion has long been postulated as the active species that reacts with carbon dioxide in the electrochemical reduction of CO(2).     

Effects of electron withdrawing and donating groups on the efficiency of tris(2,2'-bipyridyl)ruthenium(II)/tri-n-propylamine electrochemiluminescence

The effects of electron withdrawing and electron donating groups on the electrochemiluminescent (ECL) properties of tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)3(2+) where bpy = 2,2'-pyridine) are reported. The electrochemistry, photophysics and ECL of (bpy)2Ru(DC-bpy)2+, and (bpy)2Ru(DM-bpy)2+ (DC = 4,4'-dicarboxy-2,2'-bipyridine; DM = 4,4'-dimethyl-2,2'-bipyridine) have been studied relative to Ru(bpy)3(2+) in 50:50 (v/v) acetonitrile(CH3CN):H2O (0.1 M KH2PO4), and aqueous solutions. Furthermore, the effects of Triton X-100 (polyethylene glycol tert-octylphenyl ether) on the electrochemical, spectroscopic and ECL properties of these compounds are reported. The anodic oxidation of Ru(bpy)3(2+), (bpy)2Ru(DC-bpy)2+, and (bpy)2Ru(DM-bpy)2+ produces ECL in the presence of tri-n-propylamine (TPrA) in all solvent systems. ECL efficiencies (phi(ecl), photons produced per redox event) of 0.73 and 0.84 for (bpy)2Ru(DC-bpy)2+, and (bpy)2Ru(DM-bpy)2+ were obtained in aqueous buffered solution, using Ru(bpy)3(2+) as a relative standard (phi(ecl) = 1.0). Addition of 0.4 mM Triton X-100 results in a greater than 2-fold increase in ECL efficiences (i.e., 3.8, 2.4 and 2.3 for Ru(bpy)3(2+), (bpy)2Ru(DC-bpy)2+, and (bpy)2Ru(DM-bpy)2+, respectively) using aqueous Ru(bpy)3(2+) containing no surfactant as standard (phi(ecl) = 1.0). ECL efficiencies of 27.4, 16.5 and 26.1 were found in 50:50 (v/v) CH3CN:H2O (0.1 M KH2PO4) for Ru(bpy)3(2+), (bpy)2Ru(DC-bpy)2+, and (bpy)2Ru(DM-bpy)2+, respectively, using aqueous Ru(bpy)3(2+) containing no surfactant as standard (phi(ecl) = 1.0). Detailed studies support adsorption of surfactant on the electrode surface, thus facilitating TPrA and ruthenium oxidation.     

Electrogenerated chemiluminescence for potentiometric sensors

We report here on a generic approach to read out potentiometric sensors with electrogenerated chemiluminescence (ECL). In a first example, a potassium ion-selective electrode acts as the reference electrode and is placed in contact with the sample solution. The working electrode of the three-electrode cell is responsible for ECL generation and placed in a detection solution containing tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)(2+)] and the coreactant 2-(dibutylamino)ethanol (DBAE), physically separated from the sample by a bridge. Changes in the sample potassium concentration directly modulate the potential at the working electrode, and hence the ECL output, when a constant-potential pulse is applied between the two electrodes. A linear response of the ECL intensity to the logarithmic potassium concentration between 10 μm and 10 mM was found.     

Complexes of functionalized dipyrido[3,2-a:2',3'-c]-phenazine: a synthetic, spectroscopic, structural, and density functional theory study

The ligands 11-bromodipyrido[3,2-a:2',3'-c]phenazine and ethyl dipyrido[3,2-a:2',3'-c]phenazine-11-carboxylate have been prepared and coordinated to ruthenium(II), rhenium(I), and copper(I) metal centers. The electronic effects of substitution of dipyrido[2,3-a:3',2'-c]phenazine (dppz) have been investigated by spectroscopy and electrochemistry, and some photophysical properties have been studied. The crystal structures of [Re(L)(CO)(3)Cl] (L = ethyl dipyrido[3,2-a:2',3'-c]phenazine-11-carboxylate or 11-bromodipyrido[3,2-a:2',3'-c]phenazine) are presented. Density functional theory calculations on the complexes show only small deviations in bond lengths and angles (most bonds within 0.02 Angstroms, most angles within 2 degrees) from the crystallographic data. Furthermore, the vibrational spectra of the strongest Raman and IR bands are predicted to within an average 6 cm(-1) for the complexes [Re(L)(CO)(3)Cl] and [Cu(L)(triphenylphosphine)(2)]BF(4) (in the 1000-1700 cm(-1) region). Spectroscopic and electrochemical evidence suggest that reduction of the complex causes structural changes across the entire dppz ligand. This is unusual as dppz-based ligands typically have electrochemical properties that suggest charge localization with reduction on the phenazine portion of the ligand. The excited-state lifetimes of the complexes have been measured, and they range from ca. 200 ns for the [Ru(L)(2,2'-bipyridine)(2)](PF(6))(2) complexes to over 2 mus for [Cu(11-bromodipyrido[3,2-a:2',3'-c]phenazine)(PPh(3))(2)](BF(4)) at room temperature. The emission spectra suggest that the unusually long-lived excited states of the copper complexes result from metal-to-ligand charge transfer (MLCT) transitions as they are completely quenched in methanol. Electroluminescent films may be fabricated from these compounds; they show MLCT state emission even at low doping levels [<0.1% by weight in poly(vinylcarbazole) polymer matrix].