Molecular Dynamics Simulation of Myoglobin Collision with Low Energy Ions

Collisions of a low energy heavy ion with a myoglobin in water are simulated by molecular dynamics model. The increase of total energy is very small. The mean squared fluctuation decreases at 300 K and increases at 250K. This is an important novel cooling effect that protects the protein from ion damage. The possible collision side effect is the change of tertiary structure that blocks the normal functions of the myoglobin.     

石英玻璃低能质子辐照损伤动力学研究

地面模拟研究了JGS3光学石英玻璃在真空、热沉和能量低于200keV的低能质子辐照下表面光学性能变化的基本规律．并建立了辐照损伤色心演化的动力学唯象模型。试验结果表明．大通量低能质子辐照对石英玻璃表层具有明显的表面损伤效应。随着辐照吸收剂量的增加,光密度变化先以线性规律迅速增加．加进一步增加时逐渐呈现饱和趋势;采用较高能量辐照作用后光密度变化出现饱和趋势的拐点提前,且饱和数值降低。根据对试验结果的分析,建立了低能质子辐照下石英玻璃色心演化的动力学模型．并给出了光密度变化的表达式。采用模型结果进行数学模拟,模拟曲线与试验结果曲线相似。因此所建立的动力学模型可以用来定量描述低能质子辐照下石英玻璃光学性能随辐照吸收剂量的变化规律。     

带有质量分析系统的强流质子束低能传输线研究

强流质子源与低能传输线（LEBT）是作为CIADS注入器的超导强流质子直线加速器的关键前端系统。目前LEBT采用双螺线管匹配结构设计,并安装有限制锥,但仍然不能避免少量H₂+和H₃+进入后端加速装置,这对直线加速器长期运行稳定性与可靠性会产生一定影响。为此,在LEBT加入分析磁铁对混合束（H+,H+2,H₃+）进行分离再注入后端加速器腔体,将是一个有效的方案。本研究对经过带有30度分析磁铁的LEBT的强流质子束的束流品质进行了模拟与实验测量。结果表明,分析磁铁高阶磁场的影响使经过分析磁铁的强流质子束束流品质变差,并且该影响随着束流包络的增大而增大。这些结果为CIADS注入器的低能传输线设计提供了参考依据。High current proton source and the low energy beam transport(LEBT) are the key front-end systems for CIADS injector:high current proton linac accelerator. CIADS injector's LEBT adopts double solenoid matching structure, using a limit cone which can partially avoid H₂+ and H₃+ which injecting into the back-end linac accelerator may impact the long-term stability and reliability of the whole system. It will be an effective method to separate the hybrid ions (H+, H₂+, H₃+) by adding a dipole magnet at LEBT. In this article, we simulated and mesasured the high current proton beam quality behind the LEBT with a 30 degree dipole. The results show that the the proton beam quality is significantly effected by high-order magnetic fields of the dipole magnet, and the effect increases with the increase of the beam envelope. The achieved result is useful for the LEBT design of CIADS injector.     

低能、强流质子圆形加速器共振现象的模型研究

详细讨论了低能强流质子圆形加速器中质子穿越整数及半整数共振点的现象.通过对注入能量为1MeV,加速电压分别为1kV和2kV时的模拟计算,确定了束流安全穿越整数及半整数共振点对二极铁和四极铁加工误差的要求.     

The Model study on the Resonant Phenomena in Low Energy Proton Circular Accelerators with Intense Beams

The phenomena that proton passes through the integer and half–integer resonance points in low energy proton circular accelerator with intense beams are discussed.The manufacturing tolerances of the dipole magnet and quadruple magnet is given through simulations on the cases when the injection energy is 1MeV and the accelerating RF voltage per one turn is 1kV and 2kV, respectively. With these given manufacturing tolerances, particles can safely cross over the integer and half–integer resonant points.     

15eV的质子与羟基碰撞的动力学

采用含时密度泛函理论和分子动力学非绝热自洽耦合的方法,全微观研究沿垂直羟基分子轴向入射初动能为15 eV的质子与羟基碰撞过程的电子-离子关联动力学.计算质子和羟基动能、碰撞后羟基电子和离子的运动状态及系统电子密度的实时分布.结果表明:质子与羟基碰撞后俘获羟基的一部分电子被反弹并损失26.7%的初始动能而羟基动能增加.碰撞后丢失1%电子的羟基在保持碰撞前收缩振动的同时向计算边界平动并以93%的中性和7%的+1价的几率存在.     

低能电子碰撞Ar(e, 3e)双电离实验

通过Ar(e, 3e)五重微分截面3维图的理论与实验比较发现, 在低能电子入射的情况下, 理论与实验存在较大的偏差.     

激光感生碰撞能量转移实验

首次观察到Eu(6s6p)^P9/2至Sr(5s10s)^1So、准稳态翼为紫翼的激光感生碰撞能量转移实验现象,其荧光波长为458.42nm,峰值转移激光波长为459.75nm,并对其激发函数谱随温度和随转移激光能量改变进行实验研究,测量了激光感生碰撞能量转移谱的截面,证实了激光感生碰撞能量转移谱为非对称谱。     

中子中子碰撞产生超高能中子问题模拟

ICF的聚变靶丸中,高能中子相互之间发生碰撞将导致超高能中子的产生,推导中子中子碰撞与超高能中子产生的关系,研究利用蒙特卡罗方法确定碰撞后中子速度的方法,通过求解非线性中子输运方程及对DT聚变小球中的中子输运问题进行数值模拟,研究中子与中子碰撞产生超高能中子及其与聚变中子源强的关系问题.     

中能质子在Si和GaAs中导致的非电离能损研究

非电离能损(NIEL)引起的位移损伤效应是空间装置失效的原因之一. 运用改进的Monte Carlo程序SHIELD, 建立了质子的NIEL计算手段, 模拟计算了能量范围在10—400MeV的中能质子在硅和砷化镓中的NIEL的大小和分布.     

乙烯着火延迟的激波管测量与分子碰撞理论分析

在75%和96%两个不同的稀释度下,测量了乙烯/氧气/氩气混合气的着火延迟时间,实验当量比为1,压力为1.3-3.0 atm,温度为1092-1743 K.实验结果表明,着火延迟时间的对数与温度倒数呈良好的线性关系,在两个稀释度下,着火延迟时间随着温度增加而减少.通过回归分析,得到了乙烯着火关联式.计算得乙烯着火延迟在96%稀释度时是75%稀释度的5倍.采用分子硬球碰撞模型,计算了不同稀释度下,乙烯与氧分子的碰撞次数,在96%稀释度下,乙烯与氧气分子碰撞次数为1.53×10²⁹/（s·cm³）,而在75%稀释度下,该碰撞次数增加为5.99×10³⁰/（s·cm³）,约为前者40倍,而着火延迟时间的差异在两条件下仅为5倍的关系,可能由于位阻因子的影响所致.     

重离子碰撞中的同位旋效应

根据近年来利用同位旋相关输运理论在中能重离子碰撞同位旋效应研究方面的成果 ,并结合国际上在该问题上的进展 ,综合介绍和分析了中能重离子碰撞中的多重碎裂、原子核阻止和前平衡发射中子-质子比的同位旋效应及其随入射道条件:入射能量、碰撞参数、碰撞系统的质量 ,特别是随中子-质子比的演化过程.讨论了利用以上物理观测量在提取同位旋非对称核物质状态方程知识方面的可能性 ,并对其发展进行了展望. Based on the achievements for the intermediate energy heavy ion collision in our recent work and the progresses in the world, the isospin effects and the dependence of the entrance channel conditions on them in the intermediate energy heavy ion collisions were introduced, analysed and commended. From the calculation results by using isospin dependence quantum molecular dynamics, it is clear to see that the nuclear stopping power strongly depends on the in medium isospin dependence...     

中高能质子入射反应散裂碎片的半经验方法研究

简要分析了质子入射核反应的半经验研究方法,指出半经验研究方法应该建立在独立产额数据之上,而目前半经验研究方法主要是建立在以往的累积产额数据之上.通过对最新的实验得到的独立产额数据并结合MSDM的计算结果的分析,发现描述散裂质量分布的参数应该分为与能量有关和无关两个部分,并指出这与快过程平衡时间的不同有关. We analyzed the former solution of semi-empirical methods, which is first funded by G. Rudstam. On this basis, we pointed out that all the former solutions are basically based on so-called cumulative reaction data not on independent data. On the analysis of newly data measured by GSI, we founded that mass distribution of spalltion production could be divided to two parts: one is independent on induced-energy, but on the mass number of target; one is dependent on energy. Also, we argued that such...     

η Meson Production in High Energy Proton-Proton Collision

Based on dominant production mechanism, η meson production in high energy protonproton collision is studied. A calculation including contributions to the total cross section of the process from S11, P11 and Dl3 resonances is performed. The theoretical prediction is in general agreement with existing data and shows that the S11 resonance dominantly contributes to the total crosssection while thecontributions from the PI1 and Dl3 resonances are negligible.     

高能p-A碰撞的碰撞几何、能量损失和横能分布

采用一种仔细考虑了作用截面、表面弥散和形变效应的核碰撞几何,同时考虑到在每一次碰撞中领头质子损失能量,得到了高能ｐ－Ａｌ碰撞的横能分布,计算结果与２００ＧｅＶ／ｃｐ－Ａｌ、Ｃｕ及Ｕ碰撞的实验数据符合.In this paper, the nuclear collision geometry which was considered carefully in the interaction cross sections, surface effects and nuclear deformations is adopted. The energy loss of leading proton in each collision is considered. The transverse energy distributions in high energy p A collisions are obtained. The calculated results are in agreement with the experiment data of 200 GeV/ c p Al, Cu and U collisions.     

keV质子辐照Kapton/Al的能量传输过程

采用TRIM和SRIM2003软件模拟计算了10—300keV能量区间质子辐照Kapton/Al的能量传输过程. 依据模拟结果选取了辐照能量参数, 在室温真空条件下, 采用空间综合辐照设备对Kapton/Al进行了质子辐照. 借助于表面红外光谱技术, 对Kapton的重要官能团特征峰做了定量分析, 通过特征峰处吸光度的变化得到了典型分子键的损伤截面. 平均损伤截面和电子能损的强烈依赖关系及TRIM计算结果一致说明keV质子辐照Kapton/Al的辐照损伤主要来自电子能损效应. 太阳吸收比的变化趋势和模拟结果都表明在入射能量80keV附近, 质子辐照Kapton/Al的辐照效应最大.