Polymer supported catalysts for oxidation of phenol and cyclohexene using hydrogen peroxide as oxidant

Polymer supported transition metal complexes of N,N′-bis (o-hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by anchoring its amino derivative Schiff base (AHPHZ) on cross-linked (6 wt%) polymer beads and then loading iron(III), copper(II) and zinc(II) ions in methanol. The loading of HPHZ Schiff base on polymer beads was 3.436 mmol g⁻¹ and efficiency of complexation of polymer anchored HPHZ Schiff base for iron(III), copper(II) and zinc(II) ions was 83.21, 83.40 and 83.17%, respectively. The efficiency of complexation of unsupported HPHZ Schiff base for these metal ions was lower than polymer supported HPHZ Schiff base. The structural information obtained by spectral, magnetic and elemental analysis has suggested octahedral and square planar geometry for iron(III) and copper(II) ions complexes, respectively, with paramagnetic behavior, but zinc(II) ions complexes were tetrahedral in shape with diamagnetic behavior. The complexation with metal ions has increased thermal stability of polymer anchored HPHZ Schiff base. The catalytic activity of unsupported and polymer supported HPHZ Schiff base complexes of metal ions was evaluated by studying the oxidation of phenol (Ph) and epoxidation of cyclohexene (CH). The polymer supported metal complexes showed better catalytic activity than unsupported metal complexes. The catalytic activity of metal complexes was optimum at a molar ratio of 1:1:1 of substrate to oxidant and catalyst. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) in oxidation of phenol and epoxidation of cyclohexene was better with polymer supported metal complexes in comparison to unsupported metal complexes. The energy of activation for oxidation of phenol (22.8 kJ mol⁻¹) and epoxidation of cyclohexene (8.9 kJ mol⁻¹) was lowest with polymer supported complexes of iron(III) ions than polymer supported Schiff base complexes of copper(II) and zinc(II) ions.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Catalytic activities of polymer‐supported metal complexes in oxidation of phenol and epoxidation of cyclohexene

The metal complexes of N, N′‐bis (o‐hydroxy acetophenone) propylene diamine (HPPn) Schiff base were supported on cross‐linked polystyrene beads. The complexation of iron(III), copper(II), and zinc(II) ions on polymer‐anchored HPPn Schiff base was 83.4, 85.7, and 84.5 wt%, respectively, whereas the complexation of these metal ions on unsupported HPPn Schiff base was 82.3, 84.5, and 83.9 wt%. The iron(III) complexes of HPPn Schiff base were octahedral in geometry, whereas copper(II) and zinc(II) ions complexes were square planar and tetrahedral. Complexation of metal ions increased the thermal stability of HPPn Schiff base. Catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in the presence of hydrogen peroxide. The polymer‐supported HPPn Schiff base complexes of iron(III) ions showed 73.0 wt% conversion of phenol and 90.6 wt% conversion of cyclohexene at a molar ratio of 1:1:1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 63.8 wt% conversion for phenol and 83.2 wt% conversion for cyclohexene. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 93.1 and 98.3 wt%, respectively with supported HPPn Schiff base complexes of iron(III) ions but was lower with HPPn Schiff base complexes of copper(II) and zinc(II) ions. Activation energy for the epoxidation of cyclohexene and phenol conversion with unsupported HPPn Schiff base complexes of iron(III) ions was 16.6 kJ mol^?1 and 21.2 kJ mol^?1, respectively, but was lower with supported complexes of iron(III) ions. Copyright © 2007 John Wiley & Sons, Ltd.     

Polymer-anchoring Schiff base ligands and their metal complexes: Investigation of their electrochemical,photoluminescence, thermal and catalytic properties

In this study, we prepared three polymer-anchored Schiff base ligands and their Cu(II), Co(II) and Ni(II) transition metal complexes. For this purpose, we synthesized three Schiff base ligands from the reaction of 2,4-dihydroxybenzaldehyde with diamines in the ethanol solution and characterized by the analytical and spectroscopic methods. We investigated the electrochemical and photophysical properties of the free Schiff base ligands in different solvents and concentrations. In the electrochemical studies, we found that the ligands show the reversible and irreversible redox processes. In order to obtain the polymer-anchored ligands, we used Merrifield’s peptide resin (PS) as solid support. The surface morphologies of the polymer anchored Schiff base ligands were done with the scanning electron microscopy (SEM). We did alkene epoxidation and alkane oxidation reactions of the metal complexes and used the cyclohexene, styrene, cyclohexane and cyclooctane as the substrate and they show the low catalytic activity. The metal complexes have no selectivity in the oxidation reactions. The polymer anchored Schiff base ligands and their metal complexes have high thermal stability at the higher temperatures.     

Synthesis and spectroscopic studies of mixed-ligand and polymeric dinuclear transition metal complexes with bis-acylhydrazone tetradentate ligands and 1,10-phenanthroline

Two types of dinuclear copper(II) and nickel(II) complexes with two tetradentate N2O2 donor ligands 1,4-bis(1-anthranoylhydrazonoethyl)benzene (L1), 1,4-bis(1-salicyloylhydrazonoethyl)benzene (L2) and N,N'-bidentate heterocyclic base [1,10-phenonthroline (phen)] have been synthesized and characterized by elemental analysis, infrared spectra, UV-vis electronic absorption spectra and magnetic susceptibility measurements. The reaction of metal(II) acetates with the solution containing ligand and 1,10-phenonthroline in methanol gives mixed-ligand dinuclear metal(II) complexes with general formula [M2L(phen)2]Cl2 (L=L1 or L2), whereas, the ligands react with metal(II) acetates to form polymeric dinuclear complexes with general formula [(M2L2)n] (L=L1 or L2). In the complexes, the ligands act as dianionic tetradentate and coordination takes place in the enol tautomeric form with the enolic oxygen and azomethine nitrogen atoms while the phenolic hydroxyl and amino groups of aroylhydrazone moiety do not participate in coordination. The effect of varying pH and solvent on the absorption behavior of both ligands and complexes has been investigated.     

Ionic-liquid supported oxidation reactions in a silicon-based microreactor

The combination of microfabrication and reaction engineering techniques has the potential to produce powerful microreactors. In a microreactor, aqueous buffers provide high electroosmatic mobility and no external pumping is required. While numerous reactions have been demonstrated to be highly efficient in microreactors, so far there has been no report on the epoxidation of cyclohexene in a microreactor. This is mainly due to the reduced solubility of cyclohexene in aqueous media. The greater volatility of cyclohexene leading to long reaction times is another reason. To improve the solubility of cyclohexene in the reaction buffer, a water soluble ionic-liquid 1-butyl-3-methylimidazolium tetrafluoroborate was used, also for the first time in microreactor work. In this letter, four different catalysts (i.e., manganese(II) and copper(II) complexes of Schiff and reduced Schiff bases) were synthesized and used for the oxidation reactions considered. The reactions were monitored by gas chromatography/mass spectrometry. The microreactor performance was evaluated by comparing with a conventional (batch scale) reaction. Catalytic activities and yields were found to be relatively high for the copper(II) complexes as compared with the conventional route.     

Synthesis,characterization and catalytic activity of polymer anchored transition metal complexes toward oxidation reactions

The polymer-anchored Schiff base complexes of Cu(II), Co(II), Ni(II), Mn(II) and Fe(III) were prepared by reacting polystyrene amine with 2-pyridinecarbaldehyde followed by loading of metal atom in methanol. These complexes were characterized by using different physico-chemical and spectroscopic methods. The catalytic activity of these polymer-supported metal catalysts was tested for the oxidation of various olefins and alcohols. Influence of various reaction parameters, such as reaction temperature, reaction time, oxidant, substrate-to-oxidant mole ratio and nature of solvent, was studied for the oxidation of cyclohexene with these catalysts. Among the catalysts studied, Cu-Cat showed higher catalytic activity toward oxidation reactions than the other catalysts. Moreover, hot filtration experiments proved that these catalysts are truly heterogeneous and can be reused a number of times without significant loss of activity.     

Optically active 4- and 5-coordinate transition metal complexes of bifurcated dipeptide Schiff bases

Symmetrical and unsymmetrical benzophenone Schiff bases of bifurcated dipeptides [e.g., Ar2C=N-CHR1- CONH-HNCO-CHR2-N=CAr2] have been synthesized using Boc methodology. These ligands may be regarded as chiral porphyrin mimics because of the alpha-carbons of the amino acids. The Schiff bases function as effective ligands for transition metals, particularly the late transition metals Ni(II), Cu(II), and Zn. Upon metal insertion, there is loss of the amide protons, resulting in N4 chelating ligands that retain the amino acid based chirality as well as newly generated metal-centered chirality, which for the Ni(II) complexes have been shown by X-ray analysis to be lambda (left-handed helix) if the amino acids are S. For Ni(II) and Cu(II), metal insertion results in highly colored complexes and is easily followed by UV-vis spectrophotometry. Several Ni(II) complexes were also characterized by 1H NMR. Co(II) and Mn(II) complexes were characterized by CW EPR. Two Cu(II) complexes, 7f.CuII and 7k.CuII, were characterized by EPR (ENDOR and ESEEM), which clearly showed the pentacoordinate nature of 7k.CuII.     

氮杂冠醚取代单Schiff碱过渡金属配合物催化氧化对二甲苯研究

本文将苯并-10-氮杂-15-冠-5或吗啉基取代的单Schiff碱过渡配合物作为催化剂,在常压和120℃条件下,以空气为氧源,研究了对二甲苯催化氧化反应。实验探讨了Schiff碱配合物中心金属离子、Schiff碱配体中挂接的氮杂冠醚环、配体芳环上取代基和反应时间等对对二甲苯催化氧化反应的影响。实验结果表明:Schiff碱配合物中氮杂冠醚的存在能显著缩短反应诱导期,提高催化反应活性和产物选择性;Schiff碱Mn(III)配合物比Schiff碱Co(II)具有更高的催化反应活性;氮杂冠醚Schiff碱Mn(III)配合物对于二甲苯的催化氧化反应转化率大于60%,对甲苯甲酸产物的选择性均高于70%。     

Syntheses, structures, and reactivity of low spin iron(III) complexes containing a single carboxamido nitrogen in a [FeN5L] chromophore

A new pentacoordinate ligand based on TPA (tris-(2-pyridylmethyl)amine), namely, N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide (PaPy(3)H), has been synthesized. The iron(III) complexes of this ligand, namely, [Fe(PaPy(3))(CH(3)CN)](ClO(4))(2) (1), [Fe(PaPy(3))(Cl)]ClO(4) (2), [Fe(PaPy(3))(CN)]ClO(4) (3), and [Fe(PaPy(3))(N(3))]ClO(4) (4), have been isolated and complexes 1-3 have been structurally characterized. These complexes are the first examples of monomeric iron(III) complexes with one carboxamido nitrogen in the first coordination sphere. All four complexes are low spin and exhibit rhombic EPR signals around g = 2. The solvent bound species [Fe(PaPy(3))(CH(3)CN)](ClO(4))(2) reacts with H(2)O(2) in acetonitrile at low temperature to afford [Fe(PaPy(3))(OOH)](+) (g = 2.24, 2.14, 1.96). When cyclohexene is allowed to react with 1/H(2)O(2) at room temperature, a significant amount of cyclohexene oxide is produced along with the allylic oxidation products. Analysis of the oxidation products indicates that the allylic oxidation products arise from a radical-driven autoxidation process while the epoxidation is carried out by a distinctly different oxidant. No epoxidation of cyclohexene is observed with 1/TBHP.     

Dinuclear CoII/GdIII and CoIII/GdIII complexes derived from hexadentate Schiff bases: synthesis,structure, and magnetic properties

Two heterodimetallic complexes of formulae [LCo(MeOH)Gd (NO3)3] (1) and [LCo(AcO)2Gd(NO3)2] (2) (H2L = 1,3-bis[(3-methoxysalicylidene)amino]-2,2'-dimethylpropane) have been synthesized and characterized. The structure of 1 consists of discrete dinuclear entities. The cobalt(II) ion exhibits a square-pyramidal geometry, in which the basal plane is formed by the N2O2 set of the inner Schiff base site and the apical position is occupied by the methanol oxygen atom. The gadolinium(III) ion is ten-coordinate to three bidentate nitrate groups and the four oxygen atoms of the Schiff base. The phenolate oxygen atoms act as a bridge between both metal ions. Complex 2 is also formed by isolated dinuclear species. The cobalt(III) ion shows a distorted octahedral geometry in which the equatorial plane is formed by the N2O2 set of the Schiff base, and the axial positions are occupied by two oxygen atoms from both acetate groups. The gadolinium(III) ion is ten-coordinate to two bidentate nitrate groups, two oxygen atoms of the acetate groups, and the four oxygen atoms of the Schiff base. The metal ions are bridged through both the phenolate oxygen and the acetate groups, the latter acting as mu 2 ligands. Magnetic measurements on compound 1 allowed, for the first time, a quantitative evaluation of the J(Co,Gd) ferromagnetic interaction parameter (J = 0.90 cm-1). The CoII zero-field splitting has to be taken into account to fit the experimental data at low temperature (D = 4.2 cm-1). In complex 2, the magnetically isolated gadolinium center obeys a Curie law.     

Oxovanadium(IV) and copper(II) complexes of 1,2-diaminocyclohexane based ligand encapsulated in zeolite-Y for the catalytic oxidation of styrene, cyclohexene and cyclohexane

N,N′-Bis(salicylidene)cyclohexane-1,2-diamine (H₂sal-dach) reacts with oxovanadium(IV) and copper(II) exchanged zeolite-Y in refluxing methanol to yield the corresponding zeolite-Y encapsulated metal complexes, abbreviated herein as [VO(sal-dach)]-Y and [Cu(sal-dach)]-Y. Spectroscopic studies (IR, electronic and ¹H NMR), thermal analysis, scanning electron micrographs (SEM) and X-ray diffraction patterns have been used to characterise these complexes. These encapsulated complexes catalyse the oxidation, by H₂O₂, of styrene, cyclohexene and cyclohexane efficiently in good yield. Under the optimized conditions, the oxidation of styrene catalysed by [VO(sal-dach)]-Y and [Cu(sal-dach)]-Y gave 94.6 and 21.7% conversion, respectively, where styreneoxide, benzaldehyde, benzoic acid, 1-phenylethane-1,2-diol and phenylacetaldehyde being the major products. Oxidation of cyclohexene catalysed by these complexes gave cyclohexeneoxide, 2-cyclohexene-1-ol, cyclohexane-1,2-diol and 2-cyclohexene-1-one as major products. Conversion of cyclohexene achieved was 86.6% with [VO(sal-dach)]-Y and 18.1% with [Cu(sal-dach)]-Y. A maximum of 78.1% conversion of cyclohexane catalysed by [Cu(sal-dach)]-Y and only 21.0% conversion by [VO(sal-dach)]-Y with major reaction products of cyclohexanone, cyclohexanol and cyclohexane-1,2-diol have been obtained.     

Synthesis, potentiometric and antimicrobial studies on metal complexes of isoxazole Schiff bases

The metal complexes of Cu(II), Ni(II) and Co(II) with Schiff bases of 3-(2-hydroxy-3-ethoxybenzylideneamino)-5-methyl isoxazole [HEBMI] and 3-(2-hydroxy-5-nitrobenzylidene amino)-5-methyl isoxazole [HNBMI] which were obtained by the condensation of 3-amino-5-methyl isoxazole with substituted salicylaldehydes have been synthesized. Schiff bases and their complexes have been characterized on the basis of elemental analysis, magnetic moments, molar conductivity, thermal analysis and spectral (IR, UV, NMR and Mass) studies. The spectral data show that these ligands act in a monovalent bidentate fashion, co-ordinating through phenolic oxygen and azomethine nitrogen atoms. Chelates of Co(II), Ni(II) appear to be octahedral and Cu(II) appears to be distorted octahedral. To investigate the relationship between formation constants of binary complexes and antimicrobial activity, the dissociation constants of Schiff bases and stability constants of their binary metal complexes have been determined potentiometrically in aqueous solution at 30+/-1 degrees C and at 0.1 M KNO3 ionic strength and discussed. Antimicrobial activities of the Schiff bases and their complexes were screened. The structure-activity correlation in Schiff bases and their metal(II) complexes are discussed, based on the effect of their stability constants. It is observed that the activity enhances upon complexation and the order of activity is in accordance with stability order of metal ions.     

Synthesis, characterization and structures of copper(II) complexes containing carboxylate and sulfonate groups

Four copper(II) complexes containing Schiff base and reduced Schiff base ligands derived from pyridine-2-aldehyde and amino acid containing carboxylate and sulfonate functional groups (N-(2-pyridylmethylene)-amino acid and N-(2-pyridylmethyl)-amino acid, (amino acids = ??-alanine and aminoethanesulfonic acid) namely, [Cu(Pbals)(H₂O)₂]ClO₄·H₂O 1, [Cu(Pbal)(ClO₄)(H₂O)] 2, [Cu₂(Paes)₂(ClO₄)₂]·2H₂O 3, and [Cu(Pae)(H₂O)]·ClO₄·H₂O 4 have been synthesized and characterized. The structural features of carboxylate and sulfonate donor groups have been elucidated. These copper(II) complexes demonstrate different coordination behaviour of the carboxylate and sulfonate groups. Carboxylate groups in complexes 1 and 2 bridge the metal centers and facilitate the formation of 1D helical coordination polymeric structures. In compound 3, the sulfonate groups bridge the metal centers to form a discrete dinuclear complex. In 4, the sulfonate groups link the neighbouring metal centers to form a 1D coordination polymeric structure.     

高分子希夫碱金属配合物活性中心对催化活化分子氧性能的影响

以交联聚苯乙烯担载酪氨酸希夫碱为配体,制备了其锰、钴、铜高分子金属配合物,分别以环己烯、异丙苯和乙苯为底物,氧气为氧源,研究了温和条件下不同金属中心活化分子氧能力,发现高分子担载铜金属配合物的催化活化分子氧能力最强,对反应机理进行了探讨.     

Dioxygen Affinity and Catalytic Performance of Bis-(furaldehyde) Schiff Bases Co(II) Complexes in Cyclohexene Oxidation

As mimetic oxygen carrier or oxidation catalyst, Schiff base cobalt complexes such as Co (II) salen have been widely studied1-4. However their high-price greatly limited their application. The synthesis of cheap furaldehyde Schiff bases and their complexes with Co (II), as well as the dioxygen affinity and biomimetic catalytic oxidation performance of these complexes are worth trying to study. In this paper, the saturated dioxygen uptake of cobalt complexes with different bis-(furaldehyd…     

Chiral Ti(IV) complexes of hexadentate Schiff bases as precatalysts for the asymmetric addition of TMSCN to aldehydes and the ring opening of cyclohexene oxide

Chiral dinuclear titanium(IV) complexes (generated in situ from hexadentate Schiff bases and titanium tetra-isopropoxide) have been found to be more effective catalysts for the asymmetric addition of trimethylsilyl cyanide to aldehydes and the ring opening of cyclohexene oxide than their mononuclear analogues. The best results were obtained for benzaldehyde (86% enantiomeric excess) and cyclohexene oxide (89% enantiomeric excess).     

Structure and properties of Dinuclear [RuII([n]aneS4)] complexes of 3,6-Bis(2-pyridyl)-1,2,4,5-tetrazine

The synthesis of dinuclear [Ru(II)([n]aneS(4))] (where n = 12, 14) complexes of the bridging ligand 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine are reported. The X-ray structures of both of the new complexes are compared to a newly obtained structure for a dinuclear [Ru(II)([9]aneS(3))]-based analogue, whose synthesis has previously been reported. A comparison of the electrochemistry of the three complexes reveals that the first oxidation of the [Ru(II)([n]aneS(4))]-based systems is a ligand-based couple, indicating that the formation of the radical anion form of the bridging ligand is stabilized by metal center coordination. Spectroelectrochemistry studies on the mixed-valence form of the new complexes suggest that they are Robin and Day Class II systems. The electrochemical and electronic properties of these complexes is rationalized by a consideration of the pi-bonding properties of thiacrown ligands.     

Transition metal complexes of isonicotinic acid (2-hydroxybenzylidene)hydrazide

A new series of transition metal complexes of Schiff base isonicotinic acid (2-hydroxybenzylidene)hydrazide, HL, have been synthesized. The Schiff base reacted with Cu(II), Ni(II), Co(II), Mn(II), Fe(III) and UO2(II) ions as monobasic tridentate ligand to yield mononuclear complexes of 1:2 (metal:ligand) except that of Cu(II) which form complex of 1:1 (metal:ligand). The ligand and its metal complexes were characterized by elemental analyses, IR, UV-vis, mass and 1H NMR spectra, as well as magnetic moment, conductance measurements, and thermal analyses. All complexes have octahedral configurations except Cu(II) complex which has an extra square planar geometry distorted towards tetrahedral. While, the UO2(II) complex has its favour hepta-coordination. The ligand and its metal complexes were tested against one strain Gram +ve bacteria (Staphylococcus aureus), Gram -ve bacteria (Escherichia coli), and Fungi (Candida albicans). The tested compounds exhibited higher antibacterial activities.     

SYNTHESIS AND CATALYTIC PROPERTY OF POLYSTYRENE SUPPORTED GLUTAMIC ACID SCHIFF BASE COMPLEX OF Mn(Ⅱ)IN AEROBIC OXIDATION OF CYCLOHEXENE

The polystyrene supported glutamic acid Schiff base complex of Mn (Ⅱ) (PS-Sal-Glue-Mn) was prepared with chloromethylated styrene polymer beads,2,4-dihydroxybenzaldehyde, L-glutamic acid and manganese (Ⅱ) acetate tetrahyrate. The polymeric ligand and the complex were characterized by FT-IR, small area X-ray photoelectron spectroscopy (XPS) and ICP-AES. In the presence of the manganese complex, cyclohexene (1) was effectively oxidized by molecular oxygen without reductant. The major products of the reaction were 2-cyclohexen-1-ol (2), 2-cyclohexen-1-one (3) and 2-cyclohexen-1- hydroperoxide (4), which was different with typical oxidation of cyclohexene. The influence of reaction temperature and additive for oxidation had been studied. The selectivity of 2-cyclohexen-1-hydroperoxide varied with reaction time and different additives. The mechanism of cyclohexene oxidation had also been discussed.