Crystal structure and thermal behavior of two new organic monosulfates NH3(CH2)5NH3SO4 1.5H2O and NH3(CH2)9NH3SO4 H2O

The chemical preparation, the calorimetric studies and the crystal structure are given for two new organic sulfates NH₃(CH₂)₅NH₃SO₄ 1.5H₂O (DAP-S) and NH₃(CH₂)₉NH₃SO₄·H₂O (DAN-S). DAP-S is monoclinic P2₁/n with unit cell dimensions: a=11.9330(2) Å; b=10.9290(2) Å; c=17.5260(2) Å; β=101.873(1)°; V=2236.77(6) Å³; and Z=8. Its atomic arrangement is described as inorganic layers of units and water molecules separated by organic chains. DAN-S is monoclinic P2₁/c with unit cell parameters: a=5.768(2) Å; b=25.890(10) Å; c=11.177(5) Å; β=115.70(4)°; V=1504.0(11) Å³ and Z=4. Its structure exhibits infinite chains, parallel to the [100] direction where the organic cations are interconnected. In both structures a network of strong and weak hydrogen bonds connects the different components in the building of the crystal.     

Synthesis and characterization of a new monophosphate [2,5-(CH3)2C6H3NH3]H2PO4

Chemical preparation, calorimetric studies, crystal structure and spectroscopic investigations are given for a new noncentrosymmetric organic cation monophosphate [2,5-(CH₃)₂C₆H₃NH₃]H₂PO₄. This compound is orthorhombic P2₁2₁2₁ with the following unit-cell parameters: a=5.872(4), b=20.984(3), c=8.465(1) Å, Z=4, V=1043.0(5) Å³ and D_x=1.396 g cm⁻³. Crystal structure has been solved and refined to R=0.048 using 2526 independent reflections. Structure can be described as an inorganic layer parallel to (a,b) planes between which organic groups [2,5-(CH₃)₂C₆H₃NH₃]⁺ are located. Multiple hydrogen bonds connecting the different entities of compound thrust upon three-dimensional network a noncentrosymmetric configuration.     

Structural, vibrational and dielectric properties of new potassium hydrogen sulfate arsenate: K4(SO4)(HSO4)2(H3AsO4)

A new compound, K₄(SO₄)(HSO₄)₂(H₃AsO₄) was synthesized from water solution of KHSO₄/K₃H(SO₄)₂/H₃AsO₄. This compound crystallizes in the triclinic system with space group P1¯ and cell parameters: a=8.9076(2) Å, b=10.1258(2) Å, c=10.6785(3) Å; α=72.5250(14)°, β=66.3990(13)°, γ=65.5159(13)°, V=792.74(3) Å³, Z=2 and ρ_cal=2.466 g cm⁻³. The refinement of 3760 observed reflections (I>2σ(I)) leads to R₁=0.0394 and wR₂=0.0755. The structure is characterized by SO₄²⁻, HSO₄⁻ and H₃AsO₄ tetrahedra connected by hydrogen bridge to form two types of dimer (H(16)S(3)O₄⁻?S(1)O₄²⁻ and H(12)S(2)O₄⁻?H₃AsO₄). These dimers are interconnected along the [1¯ 1 0] direction by the hydrogen bonds O(3)-H(3)?O(6). They are also linked by the hydrogen bridge assured by the hydrogen atoms H(2), H(3) and H(4) of the H₃AsO₄ group to build the chain S(1)O₄?H₃AsO₄ which are parallel to the “a” direction. The potassium cations are coordinated by eight oxygen atoms with K-O distance ranging from 2.678(2) to 3.354(2) Å.Crystals of K₄(SO₄)(HSO₄)₂(H₃AsO₄) undergo one endothermic peak at 436 K. This transition detected by differential scanning calorimetry (DSC) is also analyzed by dielectric and conductivity measurements using the impedance spectroscopy techniques. The obtained results show that this transition is protonic by nature.     

X-ray diffraction, Cs and H NMR and thermal studies of CdZrCs1.5(H3O)0.5(C2O4)4·xH2O displaying Cs and water dynamic behavior

A novel mixed cadmium zirconium cesium oxalate with an open architecture has been synthesized from precipitation methods at room pressure. It crystallizes with an hexagonal symmetry, space group P3₁12 (no. 151), a=9.105(5) Å, c=23.656(5) Å, V=1698(1) Å³ and Z=3. The structure displays a [CdZr(C₂O₄)₄]²⁻ helicoidal framework built from CdO₈ and ZrO₈ square-based antiprisms connected through bichelating oxalates, which generates channels along different directions. Cesium cations, hydronium ions and water molecules are located inside the voids of the anionic framework. They exhibit a dynamic disorder which has been further investigated by ¹H and ¹³³Cs solid-state NMR. Moreover a phase transition depending both upon ambient temperature and water vapor pressure was evidenced for the title compound. The thermal decomposition has been studied in situ by temperature-dependent X-ray diffraction and thermogravimetry. The final product is a mixture of cadmium oxide, zirconium oxide and cesium carbonate.     

A new sodium samarium borate Na3Sm2(BO3)3

A new sodium samarium borate with composition Na₃Sm₂(BO₃)₃ (NSBO) has been synthesized by high temperature solid state reaction. The yellowish transparent single crystals of Na₃Sm₂(BO₃)₃ have been grown from the Na₂CO₃-H₃BO₃ flux system using the top-seeded solution growth (TSSG) method. X-ray diffraction analysis demonstrated that the NSBO crystals belong to orthorhombic systems and lattice parameters are a=5.0585 Å, b=11.0421 Å, c=7.0316 Å. The measurement of the infrared spectrum indicated that the basic anionic groups are the BO³⁻₃ groups. Furthermore, Na₃Sm₂(BO₃)₃ exhibits an optical second harmonic generation effect which is close to that of KDP (KH₂PO₄).     

High-pressure Raman spectroscopic studies on orthophosphates Ba3(PO4)2 and Sr3(PO4)2

By using diamond anvil cell (DAC), high-pressure Raman spectroscopic studies of orthophosphates Ba₃(PO₄)₂ and Sr₃(PO₄)₂ were carried out up to 30.7 and 30.1 GPa, respectively. No pressure-induced phase transition was found in the studies. A methanol:ethanol:water (16:3:1) mixture was used as pressure medium in DAC, which is expected to exhibit nearly hydrostatic behavior up to about 14.4 GPa at room temperature. The behaviors of the phosphate modes in Ba₃(PO₄)₂ and Sr₃(PO₄)₂ below 14.4 GPa were quantitatively analyzed. The Raman shift of all modes increased linearly and continuously with pressure in Ba₃(PO₄)₂ and Sr₃(PO₄)₂. The pressure coefficients of the phosphate modes in Ba₃(PO₄)₂ range from 2.8179 to 3.4186 cm⁻¹ GPa⁻¹ for ν₃, 2.9609 cm⁻¹ GPa⁻¹ for ν₁, from 0.9855 to 1.8085 cm⁻¹ GPa⁻¹ for ν₄, and 1.4330 cm⁻¹ GPa⁻¹ for ν₂, and the pressure coefficients of the phosphate modes in Sr₃(PO₄)₂ range from 3.4247 to 4.3765 cm⁻¹ GPa⁻¹ for ν₃, 3.7808 cm⁻¹ GPa⁻¹ for ν₁, from 1.1005 to 1.9244 cm⁻¹ GPa⁻¹ for ν₄, and 1.5647 cm⁻¹ GPa⁻¹ for ν₂.     

Electrical properties of SrBi2(Nb0.5Ta0.5)2O9 ceramics

Aurivillius SrBi₂(Nb_0.5Ta_0.5)₂O₉ (SBNT 50/50) ceramics were prepared using the conventional solid-state reaction method. Scanning electron microscopy was applied to investigate the grain structure. The XRD studies revealed an orthorhombic structure in the SBNT 50/50 with lattice parameters a=5.522 Å, b=5.511 Å and c=25.114 Å. The dielectric properties were determined by impedance spectroscopy measurements. A strong low frequency dielectric dispersion was found to exist in this material. Its occurrence was ascribed to the presence of ionized space charge carriers such as oxygen vacancies. The dielectric relaxation was defined on the basis of an equivalent circuit. The temperature dependence of various electrical properties was determined and discussed. The thermal activation energy for the grain electric conductivity was lower in the high temperature region (T>303.6 °C, E_a−ht=0.47 eV) and higher in the low temperature region (T<303.6 °C, E_a−lt=1.18 eV).     

Crystal chemistry of layered carbide, Ti3(Si0.43Ge0.57)C2

 The crystal structure of a layered ternary carbide, Ti₃(Si_0.43Ge_0.57)C₂, was studied with single-crystal X-ray diffraction. The compound has a hexagonal symmetry with space group P6₃/mmc and unit-cell parameters a=3.0823(1) Å, c=17.7702(6) Å, and V=146.21(1) Å³. The Si and Ge atoms in the structure occupy the same crystallographic site surrounded by six Ti atoms at an average distance of 2.7219 Å, and the C atoms are octahedrally coordinated by two types of symmetrically distinct Ti atoms, with an average C-Ti distance of 2.1429 Å. The atomic displacement parameters for C and Ti are relatively isotropic, whereas those for A (=0.43Si+0.57Ge) are appreciably anisotropic, with U₁₁ (=U₂₂) being about three times greater than U₃₃. Compared to Ti₃SiC₂, the substitution of Ge for Si results in an increase in both A-Ti and C-Ti bond distances. An electron density analysis based on the refined structure shows that each A atom is bonded to 6Ti atoms as well as to its 6 nearest neighbor A site atoms, whether the site is occupied by Si or Ge, suggesting that these bond paths may be significantly involved with electron transport properties.     

Synthesis and characterization of hexakis(acetonitrile)chromium(III) tetrafluoroborate, [Cr(NCMe)6][BF4]3. A nonaqueous Cr source

Oxidation of [Cr^II(NCMe)₄][BF₄]₂ with thianthrinium tetrafluoroborate forms [Cr^III(NCMe)₆][BF₄]₃ exhibiting two ν_CN absorptions at 2331 and 2301 cm⁻¹, and has been structurally characterized with an average Cr-N distance of 1.999 Å. From the electronic absorption spectra the ligand field splitting, Δ₀, is 20,160 cm⁻¹, which is slightly larger than [Cr^III(OH₂)₆]³⁺ in accord with the divalent chromium analogues. The 298 K ESR has a resonance at g=1.9884, and the magnetic susceptibility has a 300 K moment of 3.85μ_B characteristic of S=3/2 Cr(III). The field dependence of the magnetization can be fit to the Brillouin function also characteristic of S=3/2.     

Crystal structure and ferromagnetism of (n-C3H7)4N[CoFe(dto)3] (dto=C2O2S2)

Recently, we have discovered a new type of first order phase transition around 120 K for (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃] (dto=C₂O₂S₂), where the charge transfer transition between Fe^II and Fe^III occurs reversibly. In order to elucidate the origin of this peculiar first order phase transition. Detailed information about the crystal structure is indispensable. We have synthesized the single crystal of (n-C₃H₇)₄N[Co^IIFe^III(dto)₃] whose crystal structure is isomorphous to that of (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃], and determined its detailed crystal structure. Crystal data: space group P6₃, a=b=10.044(2) Å, c=15.960(6) Å, α=β=90°, γ=120°, Z=2 (C₁₈H₂₈NS₆O₆FeCo). In this complex, we found a ferromagnetic transition at T_c=3.5 K. Moreover, on the basis of the crystal data of (n-C₃H₇)₄N[Co^IIFe^III(dto)₃], we determined the crystal structure of (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃] by simulation of powder X-ray diffraction results.     

Crystal structure and compressibility of a high-pressure Ti-rich oxide, (Ti0.50Zr0.26Mg0.14Cr0.10)O1.81, isomorphous with cubic zirconia

A Ti-rich oxide, (Ti_0.50Zr_0.26Mg_0.14Cr_0.10)_∑=1.0O_1.81, was synthesized at 8.8 GPa and 1600 °C using a multi-anvil apparatus. Its crystal structure at ambient conditions and compressibility up to 10.58 GPa were determined with single-crystal X-ray diffraction. This high-pressure phase is isomorphous with cubic zirconia (fluorite-type) with space group Fm3¯m and unit-cell parameters a=4.8830(5) Å and V=116.43(4) Å³. Like stabilized cubic zirconia, the structure of (Ti_0.50Zr_0.26Mg_0.14Cr_0.10)O_1.81 is also relaxed, with all O atoms displaced from the (, , ) position along 〈1 0 0〉 by 0.319 Å and all cations from the (0, 0, 0) position along 〈1 1 1〉 by 0.203 Å. No phase transformation was detected within the experimental pressure range. Fitting the high-pressure data (V vs. P) to a third-order Birch-Murnaghan EOS yields K₀=164(4) GPa, K′=4.3(7), and V₀=116.38(3) Å³. The bulk modulus of (Ti_0.50Zr_0.26Mg_0.14Cr_0.10)O_1.81 is significantly lower than that (202 GPa) determined experimentally for cubic TiO₂ or that (~210 GPa) estimated for cubic ZrO₂. This study demonstrates that cubic TiO₂ may also be obtained by introducing various dopants, similar to the way cubic zirconia is stabilized below 2370 °C. Furthermore, (Ti_0.50Zr_0.26Mg_0.14Cr_0.10)O_1.81 has the greatest ratio of Ti⁴⁺ content vs. vacant O²⁻ sites of all doped cubic zirconia samples reported thus far, making it a more promising candidate for the development of electrolytes in solid oxide fuel cells.     

A new quasi-one-dimensional molecular solid based on Ni(mnt)2 anion: Crystal structure and spin-gap transition

A new molecular solid, [1-(4′-bromo-2′-fluorobenzyl)-4-dimetylaminopyridinium]-bis(maleonitriledithiolato)nickel(III), (BrFBzPyN(CH₃)₂(Ni(mnt)₂)(1), has been prepared and characterized by elemental analyses, IR, ESI-MS spectra, single crystal X-ray diffraction and magnetic measurements. Compound 1 crystallizes in the orthorhombic space group Pnma, a=20.579(4) Å, b=7.078(1) Å, c=17.942(4) Å, α=β=γ=90°, V=2613.3(9) Å³, Z=4. The Ni(III) ions of 1 form a quasi-one-dimensional Zigzag magnetic chain within a Ni(mnt)₂⁻ column through Ni?S, S?S, Ni?Ni, or π?π interactions with an Ni?Ni distance of 4.227 Å. Magnetic susceptibility measurements in the temperature range 2-300 K show that 1 exhibits a spin-gap transition around 200 K, and antiferromagnetic interaction in the high-temperature phase (HT) and spin gap in the low-temperature phase (LT). The transition for 1 is second-order phase transition as determined by DSC analyses.     

Structural and electrical behavior of Pb(Mg1/4Cd1/4Mo1/2)O3 ceramics

Preliminary X-ray structural analysis of polycrystalline Pb(Mg_1/4Cd_1/4Mo_1/2)O₃ ceramics, prepared by a solid-state reaction technique, provides single-phase orthorhombic structure at room temperature. Detailed dielectric studies of the material as a function of temperature reveal a sharp phase transition at temperature T_c=49°C obeying Curie-Weiss behavior. Scanning electron microscope (SEM) studies of the sample show the uniform distribution of grains in the samples. A dielectric anomaly and ferroelectric phase transition observed at 49°C was supported by polarization studies. The activation energy of the sample was calculated from the dielectric data. The variation of dc resistivity with temperature suggests that the compound behaves as a negative temperature coefficient resistor (NTCR).     

Crystallographic study of the phase transition in (Me4P)2ZnBr4

The compound (Me₄P)₂ZnBr₄, a member of the β-K₂SO₄ structure class, undergoes a phase transition at 84°C from the room temperature space group P12₁/c1 to the parent Pmcn structure. The room temperature structure corresponds to a ferrodistortive transition of B_1g symmetry at the zone center. At room temperature, the compound has lattice constants a=9.501(1), b=16.055(2), c=13.127(2) Å and β=90.43(1)°. For the high temperature phase, the orthorhombic cell has dimensions a=9.466(2), b=16.351(3) and c=13.284(2) Å. The structures consist of two crystallographically independent Me₄P⁺ cations and the ZnBr₄²⁻ anions. In the room temperature phase, all three ionic species show substantial displacement from the mirror plane perpendicular to the a-axis that exists in the high temperature phase, as well as rotations out of that plane. The thermal parameters of the cations are indicative of substantial librational motion. Measurements of lattice parameters have been made at 2-5°C intervals over the temperature range 40-140°C. The changes in the lattice constants appear continuous at T_c (within experimental limits) indicating that the phase transition is likely second-order. The a lattice constant shows an anomalous shortening as T_c is approached. Thermal expansion coefficients are calculated from this data. An application of Landau theory is used to derive the temperature dependencies of spontaneous shear strain and corresponding elastic stiffness constants associated with the primary order parameter.     

Structural study by X-ray diffraction and Mössbauer spectroscopy of a new synthetic iron phosphate: K4MgFe3(PO4)5

A new iron phosphate K₄MgFe₃(PO₄)₅ has been synthesized by the flux method and characterized by single-crystal X-ray diffraction and Mössbauer spectroscopy. It crystallizes in the tetragonal system with the space group and the unit cell parameters a=9.714(3) Å and c=9.494(5) Å. The crystal structure is of a new type. It exhibits a three-dimensional framework built up from corner-sharing MO₅ (M=0.75Fe+0.25Mg) trigonal bipyramids and PO₄ tetrahedra. The K⁺ ions are occupying large eight-sided tunnels running along c. A room temperature Mössbauer study confirmed the +3 valence state of iron and its five-coordination.     

Synthesis and characterization of Co7(OH)12(C2H4S2O6)(H2O)2—a single crystal structural study of a ferrimagnetic layered cobalt hydroxide

A novel layered hydrotalcite-like material, Co₇(H₂O)₂(OH)₁₂(C₂H₄S₂O₆), has been prepared hydrothermally and the structure determined using single crystal X-ray diffraction (a=6.2752(19) Å, b=8.361(3) Å, c=9.642(3) Å, α=96.613(5)°, β=98.230(5)°, γ=100.673(5)°, R1=0.0551). The structure consists of brucite-like sheets where 1/6 of the octahedral sites are replaced by two tetrahedrally coordinated Co(II) above and below the plane of the layer. Ethanedisulfonate anions occupy the space between layers and provide charge balance for the positively charged layers. The compound is ferrimagnetic, with a Curie temperature of 33 K, Curie-Weiss θ of −31 K, and a coercive field of 881 Oe at 5 K.     

Synthesis and crystal structure of [3,5-(CH3)2C6H3NH3]4P4O12·3H2O

Chemical preparation and crystal structure are given for a new cyclotetraphosphate: [3,5-(CH₃)₂C₆H₃NH₃]₄P₄O₁₂·3H₂O. This compound is triclinic P with the following unit-cell parameters: a=8.298(3), b=8.299(3), c=17.242(7)Å, α=97.13(3), β=102.72(3), γ=64.55(3)°, Z=1 and V=1045.2(8)ų. The crystal structure has been solved and refined to R=0.040 using 6086 independent reflections. The atomic arrangement can be described as layers organization. Layers built by P₄O₁₂ ring anions, ammonium groups and water molecules parallel to the plan (001), between which the organic groups are located. Characterization by X-ray diffraction, IR absorption, and thermal analysis are described.     

Crystal structure of the quaternary compound CuTa2InTe4 from X-ray powder diffraction

The crystal structure of the new quaternary compound CuTa₂InTe₄ was studied using X-ray powder diffraction data. The powder pattern refined by the Rietveld method indicates that this material crystallizes in the tetragonal system with space group I-4¯2m (No. 121), Z=2, and unit cell parameters a=6.1963(2) Å, c=12.4164(4) Å, c/a=2.00 and V=476.72(3) Å³. The structural and instrumental refinement of 28 parameters led to R_p=10.4%, R_wp=11.1%, R_exp=6.8% and χ²=2.7 for 96 independent reflections.