Electronic and magnetic properties of CeAl2 nanoparticles

We presented the X-ray magnetic circular dichroism (XMCD) and X-ray absorption spectroscopy (XAS) studies of heavy fermion compound CeAl₂ bulk and 8 nm nanoparticles, performed at the Ce M_4,5- and L₃- absorption edges. XMCD and XAS revealed that Ce in bulk CeAl₂ exhibits localized 4f¹ character with magnetic ordering. The Ce in nanoparticles, on the other hand, shows a small amount delocalized 4f⁰ character with non-magnetic Kondo behavior. By applying general sum rules, an estimation of the orbital and spin contribution to those Ce 4f moments can be obtained. Our results also demonstrated that the magnetic behavior in CeAl₂ is very sensitive to the degree of localization of the 4f electrons.     

In-situ XAS study on the Cu and Ce local structural changes in a CuO-CeO2/Al2O3 catalyst under propane reduction and re-oxidation

The redox behaviour of a CuO-CeO₂/Al₂O₃ catalyst is studied under propane reduction and re-oxidation. The evolution of the local Cu and Ce structure is studied with in-situ transmission X-ray absorption spectroscopy (XAS) at the Cu K and Ce L₃ absorption edges.CuO and CeO₂ structures are present in the catalyst as such. No structural effect on the local Cu structure is observed upon heating in He up to 873 K or after pre-oxidation at 423 K.Exposure to propane at reaction temperature (600-763 K) fully reduces the Cu²⁺ cations towards metallic Cu⁰. Quick EXAFS spectra taken during reduction show a small amount of intermediate Cu¹⁺ species. Parallel to the CuO reduction, CeO₂ is also reduced in the same temperature range. About 25% of the Ce⁴⁺ reduces rapidly to Ce³⁺ in the 610-640 K temperature interval, while beyond 640 K a further slower reduction of Ce⁴⁺ to Ce³⁺ occurs. At 763 K, Ce reduction is still incomplete with 32% of Ce³⁺.Re-oxidation of Cu and Ce is fast and brings back the original oxides.The propane reduction of the CuO-CeO₂/Al₂O₃ catalyst involves both CuO and CeO₂ reduction at similar temperatures, which is ascribed to an interaction between the two compounds.     

Electronic structure and magnetic properties of the compound CeCuIn

Magnetization, magnetic susceptibility, electrical resistivity, thermoelectric power and X-ray photoemission measurements were performed on a polycrystalline sample of CeCuIn. This compound crystallizes in a hexagonal structure of the ZrNiAl type. The magnetic data indicate that CeCuIn remains paramagnetic down to 1.9 K with a paramagnetic Curie temperature of −13 K and an effective magnetic moment equal to 2.5 μ_B. The electrical resistivity has metallic character, yet in the entire temperature range studied here, it is a strongly nonlinear function of temperature. The temperature dependence of the thermoelectric power is dominated by a small positive maximum near 76 K and a deep negative minimum at about 16 K. Above 150 K the thermopower exhibits a Mott's type behavior. The positive sign of the Seebeck coefficient in this temperature region indicates that the holes are dominant charge and heat carriers. The structure of Ce 3d_5/2 and Ce 3d_3/2 XPS spectra has been interpreted in terms of the Gunnarsson-Schönhammer theory. Three final-state contributions f⁰, f¹ and f² are clearly observed, which exhibit a spin-orbit splitting Δ_SO≈18.7 eV. The appearance of the 3d⁹f⁰ component is a clear evidence of the intermediate valence behavior of Ce. From the intensity ratio I(f⁰)/[I(f⁰)+I(f¹)+I(f²)] the 4f-occupation number is estimated to be 0.95. In turn, the ratio I(f²)/[I(f¹)+I(f²)]=0.08 yields a measure of the hybridization energy that is equal to 45 meV.     

Investigations on spectral features of tungsten ions in sodium lead alumino borate glass system

Na₂O–PbO–Al₂O₃–B₂O₃ (NPAB) glasses mixed with different concentrations of WO₃ (ranging from 0 to 2.5 mol%) are synthesized by conventional melt quenching method. The samples are characterized by X-ray diffraction (XRD), optical absorption, Electron paramagnetic resonance (EPR) and Fourier transform infrared (FT-IR) spectroscopic techniques. Glass formation is confirmed by X-ray diffraction spectra. The optical absorption spectra of these glasses exhibited a predominant broad band peak at about 850–870 nm is identified due to d_xy–d_x²_−y² transition of W⁵⁺ ions. From the optical absorption spectral data, optical band gap (E_opt) and Urbach energy (ΔE) are evaluated. From EPR spectra the strength of the signal is increased and hyperfine splitting is resolved with increasing concentration of WO₃ in the glass matrix. The FT-IR spectral studies have pointed out the existence of conventional BO₃, BO₄, B–O–B, PbO₄, WO₄ and WO₆ structural units of these glasses. Various physical properties and optical basicity are also evaluated with respect to the concentration of WO₃ ions.     

Optical, thermal, dielectric and ferroelectric behaviour of sodium acid phthalate (SAP) single crystals

Sodium acid phthalate (SAP), an efficient semi-organic crystal having dimensions 17×8×2 mm³ has been grown from aqueous solution by slow evaporation technique at room temperature within the period of 2 weeks. The lattice parameters of the grown crystals were determined using single-crystal X-ray diffraction analysis. The presence of functional groups was estimated qualitatively by Fourier transform infrared (FTIR) analysis. The band gap energy was determined using optical absorption studies. The TG/DTA analysis reveals that the SAP crystal is thermally stable up to 141.6 °C. The dielectric constant and dielectric loss was studied as a function of frequency and the corresponding activation energy (E_a) has been calculated for the grown crystal. Scanning electron microscope studies enunciate the ferroelectric domain patterns of the SAP crystal. Ferroelectric property of the grown crystal was confirmed by hysteresis loop studies.     

EPR study of Ce ions in lutetium silicate scintillators Lu2Si2O7 and Lu2SiO5

Two Ce³⁺-doped scintillator crystals, LSO (Lu₂SiO₅:Ce) and LPS (Lu₂Si₂O₇:Ce), are studied by EPR spectroscopy. The analysis indicates that Ce³⁺ substitutes for Lu³⁺ ion in a C₂-symmetry site for LPS and in two C₁-symmetry sites for LSO, with a preference for the largest one, with 6+1 oxygen neighbors. Angular dependence of the EPR spectrum shows that the electronic ground state of Ce³⁺ is different in these two matrices. It is mainly composed of |M_J|=5/2 state in LPS and |M_J|=3/2 state in LSO. The temperature dependence of the linewidth shows a noticeably long spin lattice relaxation time, especially in LPS, which is the result of a stronger crystal field in LPS than in LSO.     

Thermal, electrical, and electrochemical properties of Lanthanum-doped Ba0.5Sr0.5 Co0.8Fe0.2O3-δ

Crystal structure, thermogravimetry (TG), thermal expansion coefficient (TEC), electrical conductivity and AC impedance of (Ba_0.5Sr_0.5)_1-xLa_xCo_0.8Fe_0.2O_3-δ (BSLCF; 0.05?x?0.20) were studied in relation to their potential use as intermediate temperature solid oxide fuel cell (IT-SOFC) cathode. A single cubic pervoskite was observed by X-ray diffraction (XRD). The TEC of BSLCF was increasing slightly with the increasing content of La, and all the compounds showed abnormal expansion at high temperature. Proved by the TG result, it was associated with the loss of lattice oxygen. The electrical conductivity, which is the main defect of Ba_0.5Sr_0.5 Co_0.8Fe_0.2O_3-δ (BSCF), was improved by La doping, e.g., the compound of x=0.20 demonstrated a conductivity of σ=376 S cm⁻¹ at 392 °C. The increase of electrical conductivity resulted from the increased concentration of charge carrier induced by La doping. In addition, the AC impedance revealed the better electrochemical performance of BSLCF. For example, at 500 °C, the sample with composition x=0.15 yielded the resistance values of 2.12 Ω cm², which was only 46% of BSCF.     

Reactivity and XAFS study on (1−x)CeO2-xNiO (x=0.025-0.3) system in the two-step water-splitting reaction for solar H2 production

The redox reaction of Ce⁴⁺-Ce³⁺ promoted by the catalytic function of nickel ions in a (1−x)CeO₂-xNiO solid solution was investigated for solar H₂ production by the two-step water-splitting reaction. By irradiation using an infrared imaging lamp as a solar simulator, the O₂-releasing reaction with (1−x)CeO₂-xNiO solid solution proceeded at 1673-1873 K, and its reduced form was produced. The amounts of H₂ gas evolved by the reduced form were 1.2-2.5 cm³/g and the evolved gases amounts ratio of H₂/O₂ was nearly 2, which is equal to the stoichiometric value of the water-splitting reaction (H₂O=H₂+1/2O₂). The maximum amounts of evolved H₂ and O₂ gases were obtained at the Ce:Ni mole ratio of 0.95:0.05 (x=0.05) in the (1−x)CeO₂-xNiO system. The X-ray absorption fine structure (XAFS) measurement showed that the O₂-releasing and H₂-generation reactions with (1−x)CeO₂-xNiO solid solution were repeatable with the redox system of Ce⁴⁺-Ce³⁺, which was enhanced by the catalytic function of Ni²⁺-Ni⁰.     

Magnetic structure of the ternary germanide Ce3Ni2Ge7

The ternary germanide Ce₃Ni₂Ge₇ has been studied by means of neutron powder diffraction and Ce L_III X-ray absorption (XAS). This compound which orders antiferromagnetically below T_N=7.2(2) K, crystallizes in the orthorhombic (Cmmm space group) La₃Co₂Sn₇-type structure where Ce atoms occupying two inequivalent crystallographic sites: Ce1 at 2d site and Ce2 at 4i site. Below T_N, the antiferromagnetic structure of Ce₃Ni₂Ge₇ is collinear but only the Ce2 atoms carry a magnetic moment (1.98(2) μ_B at 1.4 K). The absence of ordered magnetic moment on Ce1 atoms can be correlated to the average valence v=3.03(1), determined by X-ray absorption spectroscopy, suggesting an intermediate valence state of cerium in the 2d site.     

Synthesis, crystal structure, EPR and electrochemical studies of copper(II) dipicolinate complex with 2,2′-dipyridylamine ligand

The (2,2′-dipyridylamine)(pyridine-2,6-dicarboxylato)copper(II) trihydrate complex was synthesized and characterized by spectroscopic (IR, UV-vis, EPR), X-ray diffraction technique and electrochemical methods. The copper(II) center is surrounded by one bidentate 2,2′-dipyridylamine (dpa) and one tridentate dipicolinate (dpc) ligand, and exhibits a distorted square-pyramidal geometry. The crystal packing involves both hydrogen-bonding and π-π interactions. The solvent water molecules link monomers to one another through hydrogen-bonding interactions, forming ladder-type chains in the ab plane. π-π interactions also occur between the dpa rings of neighboring molecules and are responsible for interchain packing. Based on EPR and optical absorption studies, spin-Hamiltonian and bonding parameters have been calculated. The g-values, calculated for title complex in polycrystalline state at 298 K and in frozen DMF (110 K), indicate the presence of the unpaired electron in the d_x²-y² orbital. The evaluated metal-ligand bonding parameters showed strong in-plane σ- and π-bonding. The cyclic voltammogram of the title complex investigated in DMF (dimethylformamide) solution exhibits only metal centered electroactivity in the potential range ±1.25 V versus Ag/AgCl reference electrode.     

Preparation, structure and oxide ion conductivity in Ce6−xYxMoO15−δ (x=0.1-1.4) solid solutions

The Ce_6−xY_xMoO_15−δ solid solution with fluorite-related structure have been characterized by differential thermal analysis/thermogravimetry (DTA/TG), X-ray diffraction (XRD), IR, Raman, scanning electric microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) methods. The electric conductivity of samples is investigated by Ac impedance spectroscopy. An essentially pure oxide-ion conductivity of the oxygen-deficiency was observed in pure argon, oxygen and air. The highest oxygen-ion conductivity was found in Ce_5.5Y_0.5MoO_15−δ ranging from 5.9×10⁻⁵ (S cm⁻¹) at 300 °C to 1.3×10⁻² (S cm⁻¹) at 650 °C, respectively. The oxide-ion conductivities remained stable over 80 h-long test at 800 °C. These properties suggested that significant oxide-ionic conductivity exists in these materials at moderately elevated temperatures.     

Experimental and theoretical studies on bis(glycine) lithium nitrate (BGLiN): A physico-chemical approach

Good quality and bulk size single crystal (size: 20×13×8 mm³) of bis(glycine) lithium nitrate (BGLiN) was grown by a slow evaporation solution technique from the aqueous solutions at constant temperature i.e. 27 °C using synthesized materials. Crystal system and lattice parameters were determined by single crystals as well as powder X-ray diffraction analysis. The lattice parameters of the titled compound are a=10.0223 Å, b=5.0343 Å, c=17.0510 Å, and V=860.312 Å³ and it crystallized in an orthorhombic system with space group Pca2₁ obtained by single crystal XRD. Elemental composition was confirmed by energy dispersive X-ray spectroscopic analysis. Optical absorption spectrum was recorded and various optical parameters such as optical transmission (~60%), and optical band gap (4.998 eV) were calculated. Photoluminescence study shows that the grown crystal is free from major defects. Crystalline perfection of the grown crystal was assessed and found good. Ground state optimized geometry has been obtained by using DFT with 6-31G(d,p) basis set. HOMO and LUMO energy gap was found to be 6.01 eV and dipole moment was 1.65 D.     

Structural, optical and scintillation properties of cerium cyclotriphosphates and polyphosphates

The cerium cyclotriphosphate CeP₃O₉·3H₂O and polyphosphate Ce(PO₃)₃ have been optically investigated for the first time. In both materials, excitation and emission spectra under UV and X-ray excitations as well as emission decays of Ce³⁺ were measured at room temperature. The spectroscopic results of anhydrous Ce(PO₃)₃, prepared by progressively heating the corresponding CeP₃O₉. 3H₂O, are discussed and correlated with the structural data.For the Ce(PO₃)₃ polyphosphate material, the Stokes shift of the d-f emission is very small (760 cm⁻¹), inducing an efficient ultraviolet luminescence and a new application as scintillator.     

Electronic structure of BaTiO3 using resonant X-ray emission spectroscopy at the Ba-L3 and Ti-K absorption edges

We have studied the electronic properties of the ferroelectric barium titanate BaTiO₃ using two complementary bulk-sensitive spectroscopic probes, resonant X-ray emission spectroscopy (RXES) and X-ray absorption spectroscopy in the partial fluorescence mode (PFY-XAS) at the Ba-L₃ and Ti-K absorption edges. Contrary to a previous study, we found no fine structure in the pre-edge area of the PFY-XAS spectrum at the Ba-L₃ edge, and no temperature-induced spectral change was observed between room temperature and 150 °C. This result is not supportive of the possible presence of the displacement around Ba²⁺ at the Curie temperature. RXES spectra were measured at the Ti-K edge for BaTiO₃, along with SrTiO₃ and La-doped metallic SrTiO₃. The photon energy of the emission peak is found to be nearly constant throughout the absorption edge for all three compounds. We deduce the Ti 3d states to have a delocalized character, in contrast with the Ba 5d states, a property which is consistent with the proposed scenario of the formation of electric dipoles in BaTiO₃.     

Compositional-dependent lead borate based glasses doped with Eu ions: Synthesis and spectroscopic properties

New multicomponent lead borate based glasses with various PbO/B₂O₃ weight ratio were prepared. The glass samples were analyzed in detail by using Raman and IR absorption spectroscopy. Optical properties of Eu³⁺ ions have been investigated in lead borate based systems, in which PbO/B₂O₃ weight ratios were changed from 1:2 to 8:1 in glass composition. The values of the phonon energy of the host and ⁵D₀ lifetime of Eu³⁺ decrease, whereas absorption and emission intensities, as well as bonding parameter increase with increasing PbO concentration. Additionally, spectral lines are shifted in direction to the lower frequency region. Non-monotonic dependence of the fluorescence intensity ratio R (⁵D₀-⁷F₂/⁵D₀-⁷F₁) upon PbO/B₂O₃ content has been observed in contrast to bonding parameter that is also non-linear but monotonic. Some structural and spectroscopic aspects for Eu-doped lead borate based glasses are presented.     

Electrical and optical properties of Jäger-nickel (II)-based molecular-material thin films prepared by the vacuum thermal evaporation technique

Semiconductor molecular-material thin films of [6,13-Ac₂-5,14-Me₂-[14]-4,6,11,13-tetraenato-1,4,8,11-N₄] and the bidentate amines 1,4-diaminebutane, 1,12-diaminedodecane and 2,6-diamineanthraquinone have been prepared by vacuum thermal evaporation on corning glass substrates and crystalline silicon wafers. The films thus obtained were characterized by infrared (FTIR), ultraviolet-visible (UV-VIS) and photoluminescence (PL) spectroscopies. The surface morphology, thickness and structure of these films were analyzed by atomic force microscopy (AFM), ellipsometry and X-ray diffraction (XRD), respectively. IR spectroscopy showed that the molecular-material thin films exhibit the same intra-molecular bonds as the original compounds, which suggests that the thermal evaporation process does not significantly alter their bonds. The effect of temperature on conductivity was also measured in these samples; it was found that the temperature-dependent electric current is always higher for the voluminous amines with large molecular weights and suggests a semiconductor behavior with conductivities in the order of 10⁻⁶-10⁻¹ Ω⁻¹ cm⁻¹. Finally, the optical band gap (E_g) and cubic χ⁽³⁾ non-linear optical (NLO) properties of these amorphous molecular complexes were also evaluated from optical absorption and optical third harmonic generation (THG) measurements, respectively.     

Substitutional sites of Co ions in CuGa1−xAlxSe2:Co crystals

The substitutional sites of Co²⁺ ions in Co²⁺-doped CuG_1−xAl_xSe₂ (including CuGaSe₂ where x=0 and CuAlSe₂ where x=1) semiconductors are studied by analyzing the composition x dependence of optical spectral parameters reported in the previous literature for these materials. From the studies, we suggest that Co²⁺ occupy I-group cation site rather than III-group cation site. The suggestion is discussed.     

A simple photochemical method to synthesize Ga2O3-Dy-M thin films and their evaluation as optical materials (where M=Cr or Co)

We report the photochemical method to synthesize Ga₂O₃-Dy³⁺-Co³⁺ and Ga₂O₃-Dy³⁺-Cr³⁺ thin films. X-ray photoelectron spectroscopy, X-ray diffraction and photoluminescence were used to characterize the products. These analyses revealed that as-deposited and annealed films are amorphous. The optical characterization of the films showed that these are highly transparent in the visible spectrum but decrease significantly with doped and co-doped films. Under the excitation of UV light (254 nm) the doped films (Ga₂O₃-Dy³⁺) show the characteristic emissions of Dy³⁺ at 500, 575, 594, 605 and 652 nm corresponding to ⁴F_9/2→⁶H_J ( J=15/2, 13/2 and 11/2) transitions but the emissions decrease with the co-doped films (Ga₂O₃-Dy³⁺-M³⁺, where M=Cr or Co); a possible emission mechanism and energy transfer have been proposed.     

Magnetic ordering in CeMnCuSi2

Temperature and field-dependent magnetization measurements on polycrystalline CeMnCuSi₂ reveal that the Mn moments in this compound exhibit ordering with a ferromagnetic (FM) component ordered instead of the previously reported purely antiferromagnetic (AFM) ordering. The FM ordering temperature, T_c, is about 120 K and almost unchanged with external fields up to 50 kOe. Furthermore, an AFM component (such as in a canted spin structure) is observed to be present in this phase, and its orientation is modified rapidly by the external magnetic field. The Ce L₃-edge X-ray absorption result shows that the Ce ions in this compound are nearly trivalent, very similar to that in the heavy fermion system CeCu₂Si₂. Large thermomagnetic irreversibility is observed between the zero-field-cooled (ZFC) and field-cooled (FC) M(T) curves below T_c indicating strong magnetocrystalline anisotropy in the ordered phase. At 5 K, a metamagnetic-type transition is observed to occur at a critical field of about 8 kOe, and this critical field decreases with increasing temperature. The FM ordering of the Mn moments in CeMnCuSi₂ is consistent with the value of the intralayer Mn–Mn distance R^a_Mn–Mn=2.890 Å, which is greater than the critical value 2.865 Å for FM ordering. Finally, a magnetic phase diagram is constructed for CeMnCuSi₂.