Structure and electrical properties of SrO-borovanadate (V2O5)0.5(SrO)0.5−y(B2O3)y glassses

SrO-borovanadate glasses with nominal composition (V₂O₅)_0.5(SrO)_0.5−y(B₂O₃)_y, 0.0≤y≤0.4 were prepared by a normal quench technique and investigated by direct current (DC) electrical conductivity, inductively coupled plasma (ICP) spectroscopy, infrared (IR) spectroscopy and X-ray powder diffraction (XRD) studies in an attempt to understand the nature of mechanism governing the DC electrical conductivity and the effect of addition of B₂O₃ on the structure and electrical properties of these glasses. XRD patterns confirm the amorphous nature of the present glasses and actual compositions of the glasses were determined by ICP spectroscopy. The temperature dependence of DC electrical conductivity of these glasses has been studied in terms of different hopping models. The IR results agree with previous investigations on similar glasses and it has been concluded that similar to SrO-vanadate glasses, metavandate chain-like structures of SrV₂O₆ and individual VO₄ units also occur in SrO-borovanadate glasses. The SrV₂O₆ and VO_n polyhedra predominate in the low B₂O₃-containing SrO-borovanadate glasses as B substitutes into the V sites of the various VO_n polyhedra and only when the concentration of B₂O₃ exceeds the SrO content do BO_n structures appear. This qualitative picture of three distinct structural groupings for Sr-vanadate and Sr-borovanadate glasses is consistent with the proposed glass structure on previous IR and extended X-ray absorption fine structure (EXAFS) studies on these types of glasses. The conductivity results were analyzed with reference to theoretical models existing in the literature and the analysis shows that the conductivity data are consistent with Mott's nearest neighbor hopping model. Analysis of the conductivity data shows that they are consistent with Mott's nearest neighbor hopping model. However, both Mott VRH and Greaves models are suitable to explain the data. Schnakenberg's generalized polaron hopping model is also consistent with temperature dependence of activation energy. However, various model parameters such as density of states, hopping energy, etc. obtained from the best fits were not found to be in accordance with the prediction of the Mott model.     

Phase transition and analysis of AC conductivity data of the (Cs)0.26(Rb)0.74H(SO4)0.89(SeO4)0.11 compound

The X-ray diffraction, vibrational and impedance spectroscopy studies of (Cs)_0.26(Rb)_0.74H(SO₄)_0.89(SeO₄)_0.11 (CsRbHSSe) new solid solution are presented. The title compound undergo a superionic phase transition (SPT) at This transition was confirmed by an abrupt increase of conductivity. The bulk impedance parameters of CsRbHSSe, RbH(SO₄)_0.81(SeO₄)_0.19 (RbHSSe) and CsH(SO₄)_0.76(SeO₄)_0.24 (CsHSSe) were determined from an analysis of AC conductivity data measured in a wide temperature range. The charge carriers concentration in the samples investigated has been evaluated using the Almond-West formalism and shown to be independent of temperature.     

Proton conduction in (NH4)3 H(SO4)2 single crystals

D.C. electrical conductivity, DTA and coulometric studies on (NH₄)₃ H(SO₄)₂ single crystals are made. Conductivity is markedly anisotropic with maximum along c¹ direction. A sudden jump in the conductivity plot along c¹ direction at 413 K is supported by a large endothermic peak in DTA, confirming the presence of transition at this temperature. The values of activation energy calculated from conductivity measurements indicated that the charge carriers are protons. This was further confirmed by coulometric experiment where the gas evolved was hydrogen, as established by a gas chromatograph and the volume of H₂ released agreed with that expected from electrolysis. The mechanism of protonic conduction in this crystal is discussed.     

Crystal structure,NMR study,dielectric relaxation and AC conductivity of a new compound [Cd3(SCN)2Br6(C2H9N2)2]n

The crystal structure, the ¹³C NMR spectroscopy and the complex impedance have been carried out on [Cd₃(SCN)₂Br₆(C₂H₉N₂)₂]_n. Crystal structure shows a 2D polymeric network built up of two crystallographically independent cadmium atoms with two different octahedral coordinations. This compound exhibits a phase transition at (T=355±2 K) which has been characterized by differential scanning calorimetry (DSC), X-rays powder diffraction, AC conductivity and dielectric measurements. Examination of ¹³C CP/MAS line shapes shows indirect spin–spin coupling (¹⁴N and ¹³C) with a dipolar coupling constant of 1339 Hz. The AC conductivity of this compound has been carried out in the temperature range 325–376 K and the frequency range from 10⁻² Hz to 10 MHz. The impedance data were well fitted to two equivalent electrical circuits. The results of the modulus study reveal the presence of two distinct relaxation processes. One, at low frequency side, is thermally activated due to the ionic conduction of the crystal and the other, at higher frequency side, gradually disappears when temperature reaches 355 K which is attributed to the localized dipoles in the crystal. Moreover, the temperature dependence of DC-conductivity in both phases follows the Arrhenius law and the frequency dependence of σ(ω,T) follows Jonscher's universal law. The near values of activation energies obtained from the conductivity data and impedance confirm that the transport is through the ion hopping mechanism.     

Dielectric dispersion in the incommensurate phases of [N(CH3)4]2CoCl4 and [N(CH3)4]2ZnCl4

The complex dielectric permittivity ?(ω) of [N(CH₃)₄]₂CoCl₄ and [N(CH₃)₄]₂ZnCl₄ along the a-axis was measured between 0.35 MHz and 100 MHz. It has been found that for both substances the relaxation frequencies are about 5 MHz at T_c. The dielectric relaxation of both substances could be described by a polydispersive process β = 0.74 in the vicinity of T_c. However, for the temperature region of (T?T_c) > 0.6 for [N(CH₃)₄]₂CoCl₄ the dielectric absorption seems to be rather monodispersive.     

The electronic properties of [CH(FeCl4)0.061]x

The temperature dependence of d.c. conductivity, thermopower and electron paramagnetic resonance (EPR) results on [CH(FeCl₄)_0.061]_x are reported. The d.c. conductivity and thermopower measurements indicate metallic charge transport along the polyacetylene chain interrupted by the interfibril contact resistances and also ‘dragged’ primarily by the dopant ions. The initial measurements of EPR show Dysonian lineshape with very broad linewidth (ΔH ≈ 600 G at room temperature). The temperature dependence of EPR absorption intensity implies that there exist localized magnetic moments. The observed g value (g ≈ 2.03) suggests the dopant anion is in a form of (FeCl₄)^-.     

Thermoelectric power of ETPP (TCNQ)2 and DEPE (TCNQ)4

Results of measurements of thermoelectric power of two complexes of TCNQ, namely, ethyltriphenylphosphonium (TCNQ)₂ and 1,2 Di (N-ethyl-4-pyridinium) ethylene (TCNQ)₄ in the temperature range 100–370 K are presented. Over a certain temperature range, thermoelectric power remains independent of temperature suggesting that the most likely mechanism of charge transfer is hopping.     

H nuclear magnetic resonance study of the ferroelastic and superionic phase transitions of (NH4)4LiH3(SO4)4 single crystals

We investigated the temperature dependences of the line shape, spin-lattice relaxation time, T₁, and spin-spin relaxation time, T₂, of the ¹H nuclei in (NH₄)₄LiH₃(SO₄)₄ single crystals. On the basis of the data obtained, we were able to distinguish the “ammonium” and “hydrogen-bond” protons in the crystals. For both the ammonium and hydrogen-bond protons in (NH₄)₄LiH₃(SO₄)₄, the curves of T₁ and T₂ versus temperature changed significantly near the ferroelastic and superionic phase transitions at T_C (=232 K) and T_S (=405 K), respectively. In particular, near T_S, the ¹H signal due to the hydrogen-bond protons abruptly narrowed and the T₂ value for these protons abruptly increased, indicating that these protons play an important role in this superionic phase transition. The marked increase in the T₂ of the hydrogen-bond protons above T_S indicates that the breaking of O-H?O bonds and the formation of new H-bonds with HSO₄^- contribute significantly to the high-temperature conductivity of (NH₄)₄LiH₃(SO₄)₄ crystals.     

Structure and electrical conductivity of a novel inorganic solid electrolyte: Na14.5[Al(PO4)2F2]2.5[Ti(PO4)2F2]0.5 (NATP)

A novel inorganic solid electrolyte with a layered framework structure stable up to 1043 K, Na_14.5[Al(PO₄)₂F₂]_2.5[Ti(PO₄)₂F₂]_0.5 (NATP), has been hydrothermally prepared and characterized by single-crystal and powder X-ray diffraction techniques, X-ray fluorescence (XRF) analysis, IR spectroscopic measurement, thermogravimetric and differential thermal analysis (TGA and DTA). NATP crystallizes in the acentric hexagonal space group P3 with a=10.448(2), b=10.448(2), , Z=1, containing a large number of Na⁺ cations in the interlamellar space and the cavities of its framework. There are six different crystallographic Na⁺ cationic sites, in which 8% Na(5) and 12% Na(6) sites are vacant. Electrical conductivity measurements show that Na⁺ cations exhibit a high mobility with two domains for the electrical conductivity versus temperature.     

Magneto-optical measurement on the layer type magnet (CH2)2(ND3)2MnCl4

The linear birefringence (LB) of the antiferromagnet (CH₂)₂(ND₃)₂MnCl₄ has been measured as a function of temperature and in magnetic fields up to 100 kOe. The temperature dependence of the LB points to a pronounced two dimensional magnetic behaviour. No anomaly corresponding to the effect of three dimensional ordering could be detected at T_N. In theffield dependent measurements the spin flop at H_SF = 33.6 ± 1 kOe (T = 4K) could clearly be detected.     

Electrical transport and magnetic properties of Nd2(WO4)3

Measurements of the molar magnetic susceptibility (X_m) of a powdered sample of Nd₂(WO₄)₃ in the temperature range 300–900 K, and the electrical conductivity (σ) and dielectric constant (?$\text{)}\text{?}$ of pressed pellets of the compound in the temperature range 4.2–1180 K are reported. X_m obeys the Curie-Weiss law with a Curie constant C= 3.13 K/mole, a paramagnetic Curie temperature θ= ?60 K and a moment of Bohr magnetons, p= 3.49 for the Nd³⁺ ion. The electrical conductivity data can be explained in terms of the usual band model and impurity levels. Both the σ and ?$\text{\$}\text{?}$data indicate some sort of phase transition round 1025 K. The conductivity follows Mott's law $\text{σ = A exp (?B/T}{}^{\mathrm{<mtext>1</mtext><mtext>4</mtext>}}\text{)}$ in the temperature range $\text{200 < T < 3000}\text{K with}\text{B = 45.00 (}\text{K}\text{)}{}^{\mathrm{<mtext>1</mtext><mtext>4</mtext>}}\text{and}\text{A = 1.38 × 10}{}^{\mathrm{?5}}\text{Ω}{}^{\mathrm{?1}}\text{cm}{}^{\mathrm{?1}}$. The dielectric constant increases slowly up to 600 K, as is usual for ionic solids. The increase becomes much faster above 600 K, which is attributed to space-charge polarization of thermally generated charge carriers.     

Dielectric and AC ionic conductivity investigations in K3H(SeO4)2 single crystal

Optical observation under the polarizing microscope and DSC measurements on K₃H(SeO₄)₂ single crystal have been carried out in the temperature range 25-200 °C. It reveals a high-temperature structural phase transition at around 110 °C. The crystal system transformed from monoclinic to trigonal. Electrical impedance measurements of K₃H(SeO₄)₂ were performed as a function of both temperature and frequency. The electrical conduction and dielectric relaxation have been studied. The temperature dependence of electrical conductivity indicates that the sample crystal became a fast ionic conductor in the high-temperature phase. The frequency dependence of conductivity follows the Jonscher's universal dynamic law with the relation σ(ω)=σ(0)+Aωⁿ, where ω is the frequency of the AC field, and n is the exponent. The obtained n values decrease from 1.2 to 0.1 from the room temperature phase to fast ionic phase. The high ionic conductivity in the high-temperature phase is explained by the dynamical disordering of protons between the neighboring SeO₄ groups, which provide more vacant sites in the crystal.     

On the power-law behavior of the AC conductivity of the mixed crystal (NH4)3H(SO4)1.42(SeO4)0.58

A power law used to describe the AC conductivity from 299 to 393 K of the mixed crystal (NH₄)₃H(SO₄)_1.42(SeO₄)_0.58 led to fractional exponent values ranging from 1.08 to 0.91, depending on structural changes induced on temperature variation [B. Louati, M. Gargouri, K. Guidara and T. Mhiri, J. Phys. Chem. Solids 66 (2005) 762]. In the present note, we suggest that the fractional law exhibits features of lattice relaxation. Despite the structural changes, the parameters of the power law are mutually interconnected to yield a temperature independent phenomenon. Such behavior is probably of general validity and characterizes the universal fractional dispersion of the AC conductivity, as it was also observed in glasses of different composition.     

Two-dimensional critical behaviour in antiferrodistortive Al ur6(CIO4)3 and Ga ur6(ClO4)3

Critical behaviour with dimensionality d = 2 has been observed for the 300 K antiferrodistortive phase transition in Al ur₆(ClO₄)₃ and Ga ur₆(ClO₄)₃ by means of the temperature dependence of the ESR parameter D. The systems exhibited d = 2 behaviour in the static critical behaviour for T<T_c?40 K for T>T_c + 40 K. From the ESR data including line width measurements the local order parameter relaxation rate ω₁ has been obtained for various temperatures above T_c, with a lowest value of ω₁ = 150 MHz at T_c + 15 K     

Improved GaSb surfaces using a (NH4)2S/(NH4)2S04 solution

Bulk (1 0 0) n-GaSb surfaces have been treated with a sulphur based solution ((NH₄)₂S/(NH₄)₂SO₄) to which sulphur has been added, not previously reported for the passivation of GaSb surfaces. Au/n-GaSb Schottky barrier diodes (SBDs) fabricated on the treated material show significant improvement compared to that of the similar SBDs on the as-received material as evidenced by the lower ideality factor (n), higher barrier height (?_b) and lower contact resistance obtained. Additionally, the reverse leakage current, although not saturating, has been reduced by almost an order of magnitude at −0.2 V. The sample surfaces were studied by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The native oxide, Sb–O, present on the as-received material is effectively removed on treating with ([(NH₄)₂S/(NH₄)₂SO₄]+S) and (NH₄)₂S. Analysis of the as-received surface by XPS, prior to and after argon sputtering, suggests that the native oxide layer is ≤8.5 nm.     

Polarisation remanente dans les varietes de basse temperature de (NH4) 3AlF6 ET (NH4) 3FeF6

Dielectric and thermocurrent measurements have been carried out on (NH₄) ₃AlF₆ and (NH₄) ₃FeF₆ ceramic samples. A maximum of permittivity is observed close to the transition temperature (T_{T(NH4) 3AlF6} = 217K; T_T(NH43FeF6 = 264K. In the low-temperature phase a polarization current of about 10^-9A is obtained and can be reversed when the sign of the polarization field is changed, a property which could correspond to a ferroelectric behavior. However, no pyroelectric current is detected when the temperature decreases from T_T. Another hypothesis, based on a field-induced polarization, has been considered : the depolarization current could be due to charge displacements from potential minima favored by rising temperature. In any way, the low-temperature phase is characterized by a remanent polarization.     

Frequency dependence of ionic conductivity and dielectric relaxation studies in Na3H(SO4)2 single crystal

Electrical impedance measurements of Na₃H(SO₄)₂ were performed as a function of both temperature and frequency. The electrical conductivity and dielectric relaxation have been evaluated. The temperature dependence of electrical conductivity reveals that the sample crystals transformed to the fast ionic state in the high temperature phase. The dynamical disordering of hydrogen and sodium atoms and the orientation of SO₄ tetrahedra results in fast ionic conductivity. In addition to the proton conduction, the possibility of a Na⁺ contribution to the conductivity in the high temperature phase is proposed. The frequency dependence of AC conductivity is proportional to ω^s. The value of the exponent, s, lies between 0.85 and 0.46 in the room temperature phase, whereas it remains almost constant, 0.6, in the high-temperature phase. The dielectric dispersion is examined using the modulus formalism. An Arrhenius-type behavior is observed when the crystal undergoes the structural phase transition.     

The crystal structures of the ion conductors (NH+4)Zr2(PO4)3and (H3O+)Zr2(PO4)3

The crystal structures of (NH⁺₄)Zr₂(PO₄)₃ and (H₃O⁺)Zr₂(PO₄)₃ have been determined from neutron time-of-flight powder diffraction data obtained at 15 K. Both compounds are rhombohedral, $\text{R}\text{3}\text{c}$, with cell parameters a=8.7088(1) and c=24.2197(4) Å for the ammonium compound and a=8.7528(2), c=23.6833(11) Å for the hydronium compound. In both cases the ions are completely localized in the type I cavities and hydrogen bonded to lattice oxygens. The measured unit cell parameters are relatively large for this class of compounds but the entrance ways into the cavities are still too small to allow for unrestricted movement of the ions. Thus the low conductivity of the hydronium ion is related to this and other structural features.     

Low temperature electrical conductivity,dielectric constant,and phase transitions in (NH4)2SO4 and (ND4)2SO4

Careful axiswise measurements of d.c. conductivity and dielectric constants of (NH₄)₂SO₄ from 50 to - 196°C establish two distinct phase transitions, instead of one, at temperatures -49.5 and -58°C which remain unchanged in (ND₄)₂SO₄. Explanation based on successive distortions of non-equivalent (NH₄)⁺ is offered. Low temperature transport process in the crystal also is discussed.