Thermal stability of alumina thin films containing γ-Al2O3 phase prepared by reactive magnetron sputtering

The paper reports on thermal stability of alumina thin films containing γ-Al₂O₃ phase and its conversion to a thermodynamically stable α-Al₂O₃ phase during a post-deposition equilibrium thermal annealing. The films were prepared by reactive magnetron sputtering and subsequently post-deposition annealing was carried out in air at temperatures ranging from 700 °C to 1150 °C and annealing times up to 5 h using a thermogravimetric system. The evolution of the structure was investigated by means of X-ray diffraction after cooling down of the films. It was found that (1) the nanocrystalline γ-Al₂O₃ phase in the films is thermally stable up to 1000 °C even after 5 h of annealing, (2) the nanocrystalline θ-Al₂O₃ phase was observed in a narrow time and temperature region at ≥1050 °C, and (3) annealing at 1100 °C for 2 h resulted in a dominance of the α-Al₂O₃ phase only in the films with a sufficient thickness.     

Superconducting molybdenum nitride epitaxial thin films deposited on MgO and α-Al2O3 substrates by molecular beam epitaxy

Molybdenum nitride Mo₂N_x films were grown on MgO(0 0 1) and on α-Al₂O₃(0 0 1) substrates by molecular beam epitaxy under nitrogen radical irradiation. X-ray photoelectron spectroscopy revealed that the composition of the film varied in the range of Mo₂N_1.4-Mo₂N_2.8 depending on the growth temperature. The deposition at 973 K gave well-crystallized films on both substrates. The high-resolution reciprocal space mapping by X-ray diffraction showed that the nitrogen-rich γ-Mo₂N crystalline phase (the composition: Mo₂N_1.4) was epitaxially grown on MgO at 923 K with a slight tetragonal distortion (a = 0.421 and c = 0.418 nm) to fit the MgO lattice (a = 0.421 nm). On α-Al₂O₃(0 0 1), nitrogen-rich γ-Mo₂N (Mo₂N_1.8) was grown at 973 K with (1 1 1) planes parallel to the substrate surface. X-ray diffraction analysis with a multi-axes diffractometer revealed that the γ-Mo₂N on α-Al₂O₃(0 0 1) had a slight rhombohedral distortion (a = 0.4173(2) and α = 90.46(3)°). Superconductivity was observed below 2.8-3 K for the films grown at 973 K on MgO and on α-Al₂O₃(0 0 1).     

A comparative study on Zn0.8Cd0.2O films deposited on different substrates

Highly (0 0 2)-oriented Zn_0.8Cd_0.2O crystal films were prepared on different substrates, namely, glass, Si(1 1 1) and α-Al₂O₃(0 0 1) wafers by the dc reactive magnetron sputtering technique. The Zn_0.8Cd_0.2O/α-Al₂O₃ film has the best crystal quality with a FWHM of (0 0 2) peak of 0.3700°, an average grain size of about 200 nm and a root-mean-square surface roughness of about 70 nm; yet the Zn_0.8Cd_0.2O/glass holds the worst crystal quality with a much larger FWHM of 0.6281°. SIMS depth profile shows that the Zn and O compositions change little along the film depth direction; the Cd incorporation also almost holds the line towards the top surface other than an accumulation at the interface between the film and the substrate. The Cd content in the film is nearly consistent with that in target.     

Hydroxylated α-Al2O3 (0 0 0 1) surfaces and metal/α-Al2O3 (0 0 0 1) interfaces

X-ray photoelectron spectroscopy was applied to study the hydroxylation of α-Al₂O₃ (0 0 0 1) surfaces and the stability of surface OH groups. The evolution of interfacial chemistry of the α-Al₂O₃ (0 0 0 1) surfaces and metal/α-Al₂O₃ (0 0 0 1) interfaces are well illustrated via modifications of the surface O1s spectra. Clean hydroxylated surfaces are obtained through water- and oxygen plasma treatment at room temperature. The surface OH groups of the hydroxylated surface are very sensitive to electron beam illumination, Ar⁺ sputtering, UHV heating, and adsorption of reactive metals. The transformation of a hydroxylated surface to an Al-terminated surface occurs by high temperature annealing or Al deposition.     

Creation of nanoparticles and luminescence in Al2O3 crystal by Zn ion implantation

Single crystal α-Al₂O₃ wafers were implanted with 45 keV Zn ions up to a fluence of 1×10¹⁷ ions/cm², and were then subjected to furnace annealing in oxygen atmosphere at different temperatures. Various techniques have been applied to study the creation of nanoparticles (NPs), defects and their thermal evolutions, as well as their effects on optical properties of Al₂O₃. Our results clearly show that Zn NPs have been synthesized in the as-implanted sample and they begin to be oxidized at 500 °C. Two broad photoluminescence bands appear in the Zn ion-implanted samples and their intensities depend on the annealing temperatures. The results have been interpreted in view of creation of the defects and NPs, Zn atoms diffusion as well as their thermal evolution during annealing.     

Highly thermal stable transparent conducting SnO2:Sb epitaxial films prepared on α-Al2O3 (0 0 0 1) by MOCVD

Antimony-doped tin oxide (SnO₂:Sb) single crystalline films have been prepared on α-Al₂O₃ (0 0 0 1) substrates by metal organic chemical vapor deposition (MOCVD). The antimony doping was varied from 2% to 7% (atomic ratio). Post-deposition annealing of the SnO₂:Sb films was carried out at 700-1100 °C for 30 min in atmosphere ambient. The effect of annealing on the structural, electrical and optical properties of the films was investigated in detail. All the SnO₂:Sb films had good thermal stability under 900 °C, and the 5% Sb-doped SnO₂ film exhibited the best opto-electrical properties. Annealed above 900 °C, the 7% Sb-doped SnO₂ film still kept high thermal stability and showed good electrical and optical properties even at 1100 °C.     

Growth of α-Al2O3:C crystal with highly sensitive optically stimulated luminescence

In this work, an α-Al₂O₃:C crystal was directly grown by the temperature gradient technique (TGT) using Al₂O₃ and graphite powders as the raw materials. The optical, optically stimulated luminescence (OSL) properties and dosimetric characteristics of as-grown crystal were investigated. As-grown α-Al₂O₃:C crystal shows strong absorption band at 205, 230 and 256 nm. Three-dimensional thermoluminescence (TL) emission spectrum of the crystal shows a single emission peak at ∼415 nm. The OSL decay curve can be fitted to two exponentials, the faster component and the slower component. The OSL response of the crystal shows a linear-sublinear-saturation characteristic. As-grown α-Al₂O₃:C crystal shows excellent linearity in the dose range from 5×10⁻⁶ to 50 Gy. For doses higher than the saturation dose (100 Gy), the OSL sensitivity decreases as the dose increases.     

Stress-induced cubic-tetragonal transformation in partially stabilized ZrO2: Raman spectroscopy study

Regularities of the cubic-tetragonal transformation (C→t′) in partially stabilized zirconia were studied with Raman spectroscopy and high-temperature Raman spectroscopy techniques. New ‘low temperature’ mechanism of tetragonal nanoparticles formation in a volume of cubic solid solution was revealed in ZrO₂-Gd₂O₃ (Eu₂O₃) (6-8 mol%) single crystals. This mechanism includes nucleation of the tetragonal nanoparticles due to diffusionless C→t′ phase transformation at the first stage and gradual decrease of the stabilizer concentration inside t′-domains after subsequent low-temperature annealing. Predominant orientation of tetragonal domains due to the stress-induced C→t′ transformation was registered in ZrO₂-Gd₂O₃ (8 mol%) single crystals.     

Molecular dynamics simulation of the (0 0 0 1) α-Al2O3 and α-Cr2O3 surfaces

A simple, rigid pair-potential model is applied to investigate the dynamics of the (0 0 0 1) α-Al₂O₃ and α-Cr₂O₃ surfaces using the molecular dynamics technique. The simulations employ a two-stage equilibration process: in the first stage the simulation-cell size is determined via the constant-stress ensemble, and in the second stage the equilibration of the size-corrected simulation cell is continued in the canonical ensemble. The thermal expansion coefficients of bulk alumina and chromia are evaluated as a function of temperature. Furthermore, the surface relaxation and mean-square displacement of the atoms versus depth into the slab are calculated, and their behaviour in the surface region analysed in detail. The calculations show that even moderate temperatures (∼400 °C) give rise to displacements of the atoms at the surface which are similar to the lattice mismatch between α-alumina and chromia. This will help in the initial nucleation stage during thin film growth, and thus facilitate the deposition of α-Al₂O₃ on (0 0 0 1) α-Cr₂O₃ templates.     

Concerning the cation distribution in MnFe2O4 synthesized through the thermal decomposition of oxalates

A single phase manganese ferrite powder have been synthesized through the thermal decomposition reaction of MnC₂O₄·2H₂O-FeC₂O₄·2H₂O (1:2 mole ratio) mixture in air. DTA-TG, XRD, Mössbauer spectroscopy, FT-IR and SEM techniques were used to investigate the effect of calcination temperature on the mixture. Firing of the mixture in the range 300-500 °C produce ultra-fine particles of α-Fe₂O₃ having paramagnetic properties. XRD, Mössbauer spectroscopy as well as SEM experiments showed the progressive increase in the particle size of α-Fe₂O₃ up to 500 °C. DTA study reveals an exothermic phase transition at 550 °C attributed to the formation of a Fe₂O₃-Mn₂O₃ solid solution which persists to appear up to 1000 °C. At 1100 °C, the single phase MnFe₂O₄ with a cubic structure predominated. The Mössbauer effect spectrum of the produced ferrite exhibits normal Zeeman split sextets due to Fe³⁺ions at tetrahedral (A) and octahedral (B) sites. The obtained cation distribution from Mössbauer spectroscopy is (Fe_0.92Mn_0.08)[Fe_1.08Mn_0.92]O₄.     

Synthesis and characterization of hybrid nanocomposites of polypyrrole filled with iron oxide nanoparticles

Hybrid polypyrrole (PPy)/α-Fe₂O₃ nanocomposite films were fabricated by spin coating on a glass substrate. X-Ray diffraction analysis revealed the crystalline structure of α-Fe₂O₃ nanostructures and the nanocomposites. The broad PPy peak weakened in intensity as the α-Fe₂O₃ content increased in PPy/α-Fe₂O₃ nanocomposites. Characteristic Fourier-transform IR peaks for pure PPy shifted to higher wavenumbers on addition of α-Fe₂O₃ to PPy/α-Fe₂O₃ nanocomposites. This can be attributed to better conjugation and interactions between PPy and α-Fe₂O₃ nanoparticles. Field-emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy images of the nanocomposites reveal a uniform distribution of α-Fe₂O₃ nanoparticles in the PPy matrix. UV-vis absorption spectroscopy revealed a blue shift from λ_max= 441 nm for PPy to λ_max= 392 nm for PPy/α-Fe₂O₃, reflecting strong interactions between PPy and α-Fe₂O₃ nanoparticles. The room-temperature dc electrical conductivity increased from 4.33×10⁻⁹ to 1.81×10⁻⁸ S/cm as the α-Fe₂O₃ nanoparticle content increased from 10 to 50 wt.% in PPy/α-Fe₂O₃ nanocomposites.     

Preparation and high-temperature properties of Au nano-particles doped α-Al2O3 composite coating on TiAl-based alloy

Au nano-particles doped α-Al₂O₃ composite coatings were successfully prepared on TiAl-based alloy by electrodeposition, using the Al₂O₃ sols with minor addition of HAuCl₄ solution. The even distribution of Au nano-particles (<2.0 wt.%) in the α-Al₂O₃ matrix has been observed. Isothermal oxidation tests of the samples coated with the as-prepared novel coatings at 900 °C in static air for 200 h shown that the oxygen inward diffusion can be effectively suppressed to a low level. The results of high-temperature cyclic oxidation test at 900 °C in air revealed that the oxidation and spallation resistance of TiAl-based alloy were improved significantly under thermal cycling. In the as-prepared coatings, cracks were shielded by means of crack bridging and the fracture resistance of the formed scales can be improved by toughening effects of the composite structure. Surface scratching tests after the cyclic oxidation exhibited that the adhesion of the formed composite scale on TiAl-based alloy was remarkably improved by the Au nano-particles doped α-Al₂O₃ composite coating.     

Formation of γ-Fe2O3 hierarchical nanostructures at 500 °C in a high magnetic field

Three-dimensional (3-D) hierarchical nanostructures of γ-Fe₂O₃ are prepared by a solvothermal process combined with subsequent thermal treatment in air at 500 or 350 °C with the aid of a high magnetic field. The experimental results indicate that γ-Fe₂O₃ instead of α-Fe₂O₃ forms in air at 500 °C in a 12 T field. The products are characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The magnetization curves measured at room temperature exhibit superparamagnetic characteristics.     

In-Vacuo thermal processing of α-Al2O3 single crystals in boron ambience and its implication on TL & OSL response

Single crystals of α-Al₂O₃ (10×10 mm², 0.4 mm thick) were annealed in vacuum at about 1500 °C in the ambience of boron. The OA studies on these samples showed bands at 203, 232 and 258 nm signifying that such a treatment leads to the formation of F and F⁺ centers in significant concentrations, these bands, however, were not found in the Al₂O₃ crystals processed in the similar manner in the absence of boron. The Al₂O₃:B samples were irradiated to different absorbed doses of ⁹⁰Sr/⁹⁰Y β-source and the continuous wave OSL (CW-OSL) was recorded on the samples using 470 nm blue light stimulation. These samples have shown a linear TL and CW-OSL response in the dose range of 20 mGy to 15 Gy. The minimum detectable dose, corresponding to 3σ limit of the variation of the output of the unirradiated dosimeters, was found to be 100 μGy. Irradiated samples stored in dark at room temperature for a period of two months show negligible fading. The TL and OSL sensitivities of the samples were found to be strongly dependent on process temperature and time. The TL response is marked by the absence of low temperature peak (<100 °C), unlike the case of α-Al₂O₃:C, implying that the boron doping does not lead to formation of shallow traps. The Al₂O₃:B samples show faster photoionisation cross-section as compared to α-Al₂O₃:C. This approach of processing of single crystal Al₂O₃ in the boron ambience thus represents a potential way of introducing dosimetrically pertinent defects in Al₂O₃ single crystals.     

Synthesis and characterization of lithium ferrite by oxalate precursor route

Nanocrystalline lithium ferrite (LiFe₅O₈) powders have been synthesized by oxalate precursor route. The effects of Fe³⁺/Li⁺ mole ratio, and annealing temperature on the formation, crystalline size, morphology and magnetic properties were systematically studied. The Fe³⁺/Li⁺ mole ratio was controlled from 5 to 3.33 while the annealing temperature was controlled from 600 to 1100 °C. The resultant powders were investigated by differential thermal analyzer (DTA), X-ray diffractometer (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). DTA results showed that LiFe₅O₈ phase started to form at around 520 °C. XRD indicated that LiFe₅O₈ phase always contained α-Fe₂O₃ impurity and the hematite phase formation increased by increasing the annealing temperature ?850 °C for different Fe³⁺/Li⁺ mole ratios 5, 4.55 and 3.85. Moreover, lithium ferrite phase was formed with high conversion percentage at critical annealing temperature 750–800 °C. Single well crystalline LiFe₅O₈ phase was obtained at Fe³⁺/Li⁺ mole ratio 3.33 and annealing temperatures from 800 to 1000 °C. Maximum saturation magnetization (68.7 emu/g) was achieved for the formed lithium ferrite phase at Fe³⁺/Li⁺ mole ratio 3.33 and annealing temperature 1000 °C.     

Structural studies of Cr-doped mullite derived from single-phase precursors

Cr-doped mullites were prepared from single-phase precursors containing up to 9.60 wt% Cr₂O₃ using a sol-gel technique followed by thermal treatment. Particle induced X-ray emission spectroscopy and X-ray powder diffraction were used to characterize the samples. Mullites were orthorhombic, space group Pbam. Cr doping caused the increase of unit-cell parameters. Strongest expansion was noticed along c-axis followed by a and b (Δc/c=0.089, Δa/a=0.061, Δb/b=0.045% per mole Cr₂O₃). A second phase, namely θ-(Al,Cr)₂O₃, was revealed by XRD in the sample containing 9.60 wt% Cr₂O₃. The structure of mullites was refined by the Rietveld method, location of Cr³⁺ was performed by the EPR spectroscopy. At low chromium doping level (Cr₂O₃ content less than ∼5 wt%) Cr³⁺ ions were substituted for Al³⁺ in the AlO₆ octahedra of the mullite structure (M1 site). For higher doping level, Cr³⁺ ions were additionally substituted for Al³⁺ in the AlO₆ octahedra of the second phase [θ-(Al,Cr)₂O₃ at 1400 °C, or α-(Al,Cr)₂O₃ at 1600 °C] which segregated in the system. Substitution of Cr³⁺ for Al³⁺ on M1 site in the mullite structure resulted in increase of average distances in (M1)O₆ octahedron and decrease of average distances in T*O₄ tetrahedron, while average distances in TO₄ tetrahedron stayed almost constant.     

Photoluminescence analysis of α-Al2O3 powders doped with Eu and Eu ions

Alumina (Al₂O₃) powders doped with europium trivalent (Eu³⁺) were prepared by a low-temperature (∼280 °C) combustion synthesis technique. When the powder was heat treated at 1200 °C for 2 h in the presence of flowing ammonia (NH₃), α-Al₂O₃ crystalline ceramic powders was obtained. The analysis of the luminescence showed that Eu³⁺ was reduced to europium divalent (Eu²⁺) after the heat-treatment process. Under ultraviolet (UV) lamp excitation (λ=254 nm) these powders containing sub-microcrystalline structures present bright red (Al₂O₃:Eu³⁺) and green (Al₂O₃:Eu²⁺) luminescence indicating that this material is a potential candidate for applications in phosphor technology.     

The luminescence and structural characteristics of Eu- doped NaSrB5O9 phosphor

A red-emitting phosphor NaSrB₅O₉:Eu³⁺ was synthesized by employing a solid-state reaction (SSR) method. The structures of the phosphors were analyzed by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) and Raman studies. The band at ~282 nm in the excitation spectra indicated the charge transfer band (CTB) of B-O in the host, whereas the CTB of Eu-O was observed at ~275 nm for the NaSrB₅O₉:Eu³⁺ (Eu³⁺=1 at.%) phosphor, which was supported by diffuse reflectance spectroscopy (DRS) measurements. The photoluminescence (PL) measurements exhibited a strong red emission band centered at about 616 nm (⁵D₀→⁷F₂) under an excitation wavelength of 394 nm (⁷F₀→⁵L₆). Upon host excitation at 282 nm, the pristine NaSrB₅O₉ exhibited a broad UV emission centered at ~362 nm. The energy transfer from host to Eu³⁺ ions was confirmed from luminescence spectra, excited with a 355 nm Nd:YAG laser. In addition, the asymmetric ratios indicate a higher local symmetry around the Eu³⁺ ion in the host. The calculated CIE (Commission International de l′Eclairage) coordinates displayed excellent color purity efficiencies (around 99.7%) compared to other luminescent materials.     

Influence of treating frequency on microstructure and properties of Al2O3 coating on 304 stainless steel by cathodic plasma electrolytic deposition

Alumina ceramic coatings were fabricated on 304 stainless steel by cathodic plasma electrolytic deposition (CPED). Influence of treating frequency of the power supply on the microstructure and properties of the coatings were studied. The results indicated that coatings obtained at various frequencies on 304 stainless steels were all composed of α-Al₂O₃ and γ-Al₂O₃, and α-Al₂O₃ was the dominant phase. The contents of α-Al₂O₃ decreased gradually in a very small rate with increasing the frequency and γ-Al₂O₃ gradually increased. The surface of alumina ceramic coating was porous. With increasing the frequency, the coating surface gradually became less rough and more compact, resulting in low surface roughness. The bonding strength of Al₂O₃ coating was higher than 22 MPa and was not strongly affected by treating frequency. With increasing the frequency, the alumina coated steels showed better and gradually increasing corrosion resistance than the uncoated one in 3.5% NaCl solution. The coating steel with desirable corrosion resistance was obtained at 800 Hz whose corrosion current potential and corrosion density were −0.237 V and 7.367 × 10⁻⁸ A/cm², respectively.     

Structure and high pressure behaviour of organic crystals based on aromatically substituted 1,3,4-oxadiazoles

The crystalline structure of a new compound containing the 1,3,4-oxadiazole moiety, 4-(5-methyl-1,3,4-oxadiazole-2yl-)-N,N′-dimethyl-phenylamine (MODPA) was determined. It shows a monoclinic structure with space group P2₁/c and lattice parameters: a=1.02997(6), b=0.64840(4), c=1.58117(10) nm and β=99.4820(10)°. To study the intermolecular interactions in oxadiazole containing organic crystals, X-ray studies on MODPA and 2,5-diphenyl-1,3,4-oxadiazole (DPO) were performed up to 5 GPa at room temperature. The Murnaghan equation of state is used to describe the compression behaviour of both substances. From these results, the bulk modulus and its pressure derivative were determined. The values obtained are: K₀=6.3 GPa and K′₀=6.8 for MODPA and K₀=7.3 GPa and K′₀=6.7 for DPO. Additionally, measurements under increasing temperature at ambient pressure were carried out to evaluate the thermal expansion coefficient: α=1.8×10⁻⁴ K⁻¹ for MODPA and α=1.9×10⁻⁴ K⁻¹ for DPO.