Oxidation of nickel and transport properties of nickel oxide

Oxidation kinetics of high purity nickel, as well as the nonstoichiometry and chemical diffusion in nickel oxide have been studied as a function of temperature (1373-1673 K) and oxygen pressure (10-10⁵ Pa) using microthermogravimetric techniques. In order to eliminate the possible participation of grain boundary diffusion in scale growth at lower temperatures, the oxidation rate measurements have always been started at the highest temperature (1673 K), when coarse-grained scale was formed, and the temperature and pressure dependence of the oxidation rate was determined by step-wise lowering the temperature of such pre-oxidized sample. Nonstoichiometry and the chemical diffusion coefficient in Ni_1−yO have also been determined on such coarse-grained oxide samples, obtained by complete oxidation of nickel at highest temperature (1673 K). It has been found, that under such conditions oxidation of nickel follows strictly the parabolic rate law, and the parabolic rate constant of this reaction is the following function of temperature and oxygen pressure: The results of nonstoichiometry measurements, in turn, may be described by the following relationship Finally, chemical diffusion coefficient in Ni_1−yO has been found to be independent on oxygen activity, indicating that the mobility of point defects in this oxide does not depend on their concentration, being the following function of temperature: It has been shown, that the parabolic rate constants of nickel oxidation, calculated from nonstoichiometry and chemical diffusion data are in excellent agreement with experimentally determined k_p values. All these results clearly indicate that the predominant defects in nonstoichiometric nickel oxide (Ni_1−yO) are double ionized cation vacancies and electron holes and the oxide scale on nickel growths by the outward volume diffusion of cations.     

The influence of chromium on the defect structure and their mobility in nonstoichiometric cobaltous oxide

Defect structure and the mobility of point defects in pure metal deficient cobalt oxide (Co_1−yO) and in Co_1−yO-Cr₂O₃ solid solutions have been studied as a function of temperature (1223-1573 K) and oxygen pressure (10-10⁵ Pa) using microthermogravimetric techniques. It has been shown that the predominant defects in pure and Cr-doped cobaltous oxide are singly ionized cation vacancies, and 3% at of dopant is high enough to fix the concentration of predominant defects in such solid solutions on a constant level being much higher than in pure Co_1−yO. Re-equilibration rate measurements have demonstrated that the chemical diffusion coefficient and thereby the mobility of point defects in pure Co_1−yO is concentration independent, strongly suggesting that in spite of rather high their concentration no interactions and clustering of defects is to be expected. On the other hand, in Cr-doped cobaltous oxide, re-equilibration rate measurements have shown, that in this case the defect structure is more complicated, although singly ionized cation vacancies seem to be still predominant defects.     

First-principles calculations to investigate optical properties of ByAlxIn1−x−yN alloys for optoelectronic devices

First-principles density-functional theory of Full-Potential Linear Augmented Plane Wave (FP-LAPW) within local density approximation (LDA) of the optical properties of B_yAl_xIn_1−x−yN systems (with x = 0.187 and y = 0.062, 0.125 and 0.187) has been performed. Substitutional atoms of Boron induced in small amounts into the (Al_xIn_1−x)-cationic sublattice of AlInN affects the energy gap of BAlInN. The higher band gap of Al_0.375In_0.625N alloy can form a useful quantum well (QW) laser structure. A best choice of B-content, B_yAl_xIn_1−x−yN could be an alternative to Al_xIn_1−xN. The results of accurate calculations of the band structures and optical properties show the better performance characteristics belong to the structure containing B-content (y) of 12.5%. The NaCl metallic B_yAl_0.1875In_0.8125−yN has a direct character for y = 12.5%. The imaginary part of dielectric function, reflectivity, refractive index, absorption coefficient and optical conductivity are investigated well and provide reasonable results for optoelectronic devices applications.     

Synthesis and magnetic properties of Ni-doped zinc oxide powders

Polycrystalline Zn_1−xNi_xO diluted magnetic semiconductors have been successfully synthesized by an auto-combustion method. X-ray diffraction measurements indicated that the 5 at% Ni-doped ZnO had the pure wurtzite structure. Refinements of cell parameters from powder diffraction data revealed that the cell parameters of Zn_0.95Ni_0.05O were a little bit larger than ZnO. Transmission electron microscopy observation showed that the as-synthesized powders were of the size ∼60 nm. Magnetic investigations showed that the nanocystalline Zn_0.95Ni_0.05O possessed room temperature ferromagnetism with the saturation magnetic moment of 0.1 emu/g (0.29 μ_B/Ni²⁺).     

Study of the CO2 decomposition over doped Ni-ferrites

The H₂ reduced NiFe_2−xCr_xO₄ can be used to decompose CO₂ to C repeatedly. A series of nanocrystalline Ni-ferrite doping different contents of Cr³⁺ were synthesized by mixed ions co-precipitation method and characterized by XRD, BET and TEM. The results showed that their crystallite sizes were 1-2 nm and BET surface area changed from 220 to 285 m²/g. The evaluation of the activity and stability indicated that Ni-ferrite with 4 wt% Cr³⁺ dopant could be used repeatedly as many as 60 times and was transformed to Fe_yNi_1−y (0<y<1) alloy and Fe₅C₂ gradually during the cycle decomposition of CO₂ to carbon, especially for no Cr³⁺ sample. After the 60th reaction, although NiFe₂O₄ phase just remained 2.1 wt%, the decomposition activity of Ni-ferrite with 4 wt% Cr³⁺ was still 60% of initial activity. This fact suggests that nanocrystalline Fe_yNi_1−y (0<y<1) alloy from the cycle reaction can contribute to the decomposition of CO₂. The results from scanning electron microscopy (SEM), TEM and XRD show that the deposited carbon from CO₂ decomposition consisted of amorphous, crystallite and carbon nanotubes.     

Effect of nickel substitution on defect chemistry, electrical properties, and dimensional stability of calcium-doped yttrium chromite

The effect of nickel substitution on defect chemistry, electrical properties, and dimensional stability of calcium-doped yttrium chromite was studied for use as an interconnect material in high temperature solid oxide fuel cells (SOFCs). The compositions of Y_0.8Ca_0.2Cr_1 − xNi_xO_3 ± δ (x = 0-0.15), prepared using the glycine nitrate process, showed single phase orthorhombic perovskite structures over a wide range of oxygen partial pressures (4.6 × 10^− 20 atm ≤ pO₂ ≤ 0.21 atm at 900 °C). X-ray diffraction (XRD) analysis indicated that most of the nickel ions replacing chromium ions are divalent and act as acceptor dopants, leading to a substantial increase in conductivity. In particular, the conductivity at 900 °C in air increased from 10 S/cm to 34 S/cm with 15% nickel substitution, and an increase in charge carrier density was confirmed by Seebeck measurements, which validated the predominant Ni²⁺ oxidation state. A point defect model was derived, and the relationship between electrical conductivity and oxygen partial pressure was successfully fitted into the proposed model. The defect modeling results indicated that nickel substitution improves the stability of calcium-doped yttrium chromite toward reduction and suppresses the oxygen vacancy formation, which results in significantly increased electrical conductivity in reducing environment. The electrical conductivity of Y_0.8Ca_0.2Cr_0.85Ni_0.15O_3 ± δ at 900 °C in reducing atmosphere (pO₂ = 10^− 17 atm) was 5.8 S/cm, which was more than an order of magnitude higher than that of Y_0.8Ca_0.2CrO_3 ± δ (0.2 S/cm). Improved stability in reducing atmosphere was further confirmed by dilatometry measurements showing reduced isothermal “chemical” expansion, and the isothermal expansion in reducing atmosphere (pO₂ = 10^− 17 atm) at 900 °C decreased from 0.07% for Y_0.8Ca_0.2CrO_3 ± δ to 0.03% for Y_0.8Ca_0.2Cr_0.85Ni_0.15O_3 ± δ. Based on these results, enhanced electrical performance and mechanical integrity is expected with nickel substitution on calcium-doped yttrium chromite in SOFC operating conditions.     

Highly cation-deficient manganese perovskite, La1−xMn1−yO3 with x=y

Oxidative (δ>0) nonstoichiometry in the perovskite ‘LaMnO_3+δ’ has been known to be manifested not with O interstitials but rather with cation vacancies of equal amounts at the two cation sites, La and Mn, i.e. La_1−xMn_1−yO₃ with x=y. Here, we report the fabrication of samples with record-high cation-vacancy concentrations (x>0.12 or δ>0.4) by means of a variety of high-pressure oxygenation techniques. Linear (negative) dependence of the cell volume on x was observed within the whole x range investigated, down to 56.9 Å³ (per formula unit) for a sample oxygenated at 5 GPa and 1100 °C using Ag₂O₂ as an excess oxygen source. With increasing degree of cation deficiency in La_1−xMn_1−xO₃, the ferromagnetic transition temperature was found to follow a bell shape with respect to x exhibiting a maximum of ∼250 K about x≈0.1. For moderately oxygenated samples large magnetoresistance effect was evidenced.     

XRD, microstructural and EPR susceptibility characterization of combustion synthesized nanoscale Mg1−xNixO solid solutions

The lattice parameter a(x) of the stoichiometric Mg_1−xNi_xO (0?x?1) solid solutions prepared by urea-based combustion synthesis with fuel to oxidizer ratio (ψ=1) was determined by X-ray diffraction. It was found that the dependence of the lattice parameter a(x) on the composition deviated more from the linear Vegard's model (VM) when compared to Kuzmin-Mironova (KM) model. a(x) in the Mg_1−xNi_xO system differs nontrivially from the predictions of both VM and KM models. For x=0.4 (Mg_0.6Ni_0.4O), the maximum deviation was about 2 and 1.7 pm, respectively. The increase in the intensity of (1 1 1) peak in XRD with increase of nickel concentration confirms that the substitution induces changes at the unit cell level. Nelson-Riley function (NRF) and Williamson-Hall plots are used to calculate micro strain in the solid solution. This analysis indicates that the micro strain is maximum for the compositions 60-40 (Mg_0.6Ni_0.4O), 50-50 (Mg_0.5Ni_0.5O) and 40-60 (Mg_0.4Ni_0.6O). The crystallite size was estimated using Williamson-Hall plot. We conclude that almost similar sized crystallite is formed in all the compositions studied. Porosity determined using XRD increases with a raise in the nickel concentration. The SEM morphology provides corroborative evidence. EPR susceptibilities of solid solution Mg_1−xNi_xO are determined at room temperature. Variable temperature of EPR allowed to check the Curie-Weiss law for solid solution. The linearity of C_M(x) and Θ(x) with concentration of nickel has ruled out chemical clustering in the samples.     

Microstructure characterization and magnetic behavior of NiAlxFe2−xO4 and Ni1−yMnyAl0.2Fe1.8O4 ferrites

NiAl_xFe_2−xO₄ and Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites were prepared by the conventional ceramic method and were characterized by X-ray diffraction, scanning electron microscopy, and magnetic measurements. The single spinel phase was confirmed for all prepared samples. A proper explanation of data is possible if the Al³⁺ ions are assumed to replace Fe³⁺ ions in the A and B sites simultaneously for NiAl_xFe_2−xO₄ ferrites, and if the Mn²⁺ ions are assumed to replace Ni²⁺ ions in the B sites for Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites. Microstructural factors play an important role in the magnetic behavior of Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites with large Mn²⁺ content.     

Effects of peak current density on the mechanical properties of nanocrystalline Ni-Co alloys produced by pulse electrodeposition

Cobalt content, grain size, microhardness and tensile strength of nanocrystalline Ni-Co deposits produced from a solution containing saccharin and cobalt sulfate at constant electrodeposition conditions (pulse on-time T_on at 1 ms and pulse off-time T_off at 15 ms) but varying the peak current density J_p were investigated. It is found that an increase in J_p makes the deposit Co content lower, colony-like morphology more obvious, grain size smaller, and hardness and tensile strength higher. All of the facts are believed to result from the higher overpotential and nucleation rates caused by the J_p increase. But its further increase could lead to reduction in the hardness and tensile strength. Peak current densities in the range of 100-120 A dm⁻² are recommended for the preparation of nanostructured Ni-Co alloy deposits with grain sizes in the range of 15-20 nm, containing 7-8% Co, possessing hardness of 590-600 kg mm⁻² and tensile strength of 1180-1200 MPa—significantly higher than the strength of pure nickel deposit which is produced by the similar method and gets similar grain size.     

Magnetism on Mg1−xZnxCyNi3

The magnetic phase diagram for Mg_1−xZn_xC_yNi₃ has been tentatively constructed based on magnetization and muon spin relaxation (μSR) measurements. The superconducting phase was observed to fade as x (y) increases (decreases). The low y samples show early stages of long-range ferromagnetism, or complete long-range ferromagnetism. In the phase diagram, the ferromagnetic phase exists in addition to the superconducting phase, suggesting that there is some correlation between superconductivity and ferromagnetism, even though the coexistence of ferromagnetism and superconductivity is not observed from the μSR measurements down to 20 mK for the superconducting sample (T_c=2.5 K, (x, y)=(0, 0.9)).     

Effect of interstitial nitrogen on magnetism and entropy change of LaFe11.7Si1.3 compound

Crystal structure, magnetism and magnetocaloric properties of LaFe_11.7Si_1.3N_y (y=0, 1.3) compounds have been studied by X-ray diffraction and magnetic measurements. The LaFe_11.7Si_1.3N_y compounds present a cubic NaZn₁₃-type structure. Insertion of 1.3 nitrogen atoms per LaFe_11.7Si_1.3 formula increases the lattice parameter and Curie temperature from 11.467 to 11.733 Å and from 190 to ∼230 K, respectively. Besides, the absorption of nitrogen drives drastically the magnetic transition from first to second order and accordingly strongly decreases the magnetocaloric effect compared to the parent alloy. Under an external field change of 5 T, the value of isothermal entropy change −ΔS is about 28 and 3.5 J/kg K for LaFe_11.7Si_1.3 and LaFe_11.7Si_1.3N_1.3, respectively, close to their Curie temperature. However, the relative cooling power RCP(S) of the nitride is about half that of the parent alloy.     

Principal energy band gaps of the quaternary alloy AlxGa1−xSbyAs1−y

The correlated function expansion (CFE) interpolation procedure was presented to efficiently estimate principal energy band gaps and lattice constants of the quaternary alloy Al_xGa_1−xSb_yAs_1−y over the entire composition variable space. The lattice matching conditions between x and y for the alloy Al_xGa_1−xSb_yAs_1−y substrated to InAs and GaSb were obtained by optimizing the alloy lattice constant to that of the substrates. The corresponding principal band gaps (E(Γ), E(L), and E(X)) were also calculated along the lattice matching condition on each substrate (InAs and GaSb).     

Pressure dependence of temperature variation of AC susceptibility for Fe50Ni37Mn13 and comparison to Fe68.1Ni31.9

Fe₅₀Ni₃₇Mn₁₃, which is a ferromagnetic alloy with FCC crystal structure, has been reported to show the Invar effect below the Curie temperature; however, this alloy shows a typical anti-Invar effect above the Curie temperature. In this paper, we discuss the pressure dependence of the temperature variation of the alternative current (AC) susceptibility at a frequency of 1 kHz for Fe₅₀Ni₃₇Mn₁₃ at various pressures up to 7.5 GPa above 77 K; we then compare the results with those for Fe_68.1Ni_31.9, which were obtained in a previous study. Fe₅₀Ni₃₇Mn₁₃ was in a ferromagnetic state throughout the entire pressure range measured. T_C decreases in inverse proportion to the increasing pressure; dT_C/dp and dln T_C/dp for Fe₅₀Ni₃₇Mn₁₃ are −26 K GPa⁻¹ and −0.07 GPa⁻¹, respectively. Further, the temperature variation of the shape of the χ′-T curve for different pressures indicates continuous combining of magnetic interactions occurs at high pressures. These results are similar to those obtained for Fe_68.1Ni_31.9.     

Oxygen-deficiency effect on properties for the ordered-perovskite cuprate,Sr2Cu(Re0.69Ca0.31)Oy (y=6.0−5.4)

We have studied physical properties and crystal structures for oxygen-deficient phases of the cubic ordered-perovskite cuprate, Sr₂Cu(Re_0.69Ca_0.31)O_y (y=6.0−5.4). It was found that the magnetic state undergoes phase transition from ferrimagnetic long-range order for y?5.9 to paramagnetism for y?5.7 via re-entrant-type spin-glass randomness in the narrow composition range around y∼5.8, as the oxygen content y decreases. The electrical resistivity becomes insulated, and the lattice constant expands simultaneously with decrease in y. The abrupt suppression of the ferrimagnetic state was observed in the oxygen-deficiency phase around 5.9?y?5.7. This is presumably attributed to microscopic phase separation accompanied by the partial cut-off of the Cu–O–Cu antiferromagnetic correlation path, which is caused by cation disorder and reduction of the oxidation state of the cations.     

Positive exchange bias in a Ni80Fe20/NixFe1−xO thin-film bilayer

We have measured positive exchange bias in a Ni₈₀Fe₂₀/Ni_xFe_1−xO thin-film nanocrystallite system. A series of solid solution Ni_xFe_1−xO 40 nm thick films capped with 25 nm thick Ni₈₀Fe₂₀ were deposited using a range of %O₂/Ar bombardment energies (i.e. End-Hall voltages). Proper tuning of the deposition conditions results in a Ni₈₀Fe₂₀/Ni_xFe_1−xO (30%O₂/Ar) based bilayer that exhibits a positive exchange bias loop shift of H_ex∼60 Oe at 150 K.     

Local environment of nitrogen in GaNyAs1−y epilayers on GaAs (0 0 1) studied using X-ray absorption near edge spectroscopy

X-ray absorption near-edge spectroscopy (XANES) is used to study the N environment in bulk GaN and in GaN_yAs_1−y epilayers on GaAs (0 0 1), for y∼5%. Density-functional optimized structures were used to predict XANES via multiple-scattering theory. We obtain striking agreement for pure GaN. An alloy model with nitrogen pairs on Ga accurately predicts the threshold energy, the width of the XANES ‘white line’, and features above threshold, for the given X-ray polarization. The presence of large quantitities of N-pairs may point to a role for molecular N₂ in epitaxial growth kinetics.     

Electrodeposition of n-type Bi2Te3−ySey thermoelectric thin films on stainless steel and gold substrates

Thermoelectric films of n-Bi₂Te_3−ySe_y were prepared by potentiostatic electrodeposition technique onto stainless steel and gold substrates at room temperature. These films were used for morphological, compositional and structural analysis by environment scanning electron microscope (ESEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The effect of different substrates on the structure and morphology of Bi₂Te_3−ySe_y films and relation between Se content in the electrodepositing solutions and in the films were also investigated. These studies revealed that Bi, Te and Se could be co-deposited to form Bi₂Te_3−ySe_y semiconductor compound in the solution containing Bi³⁺, HTeO₂⁺ and H₂SeO₃. The morphology and structure of the films are sensitive to the substrate material. The doped content of Se element in the Bi₂Te_3−ySe_y compound can be controlled by adjusting the Se⁴⁺ concentration in the electrodepositing solution. X-ray diffraction analysis indicates that the films prepared at −40 mV versus saturated calomel electrode (SCE) exhibit strong (1 1 0) orientation with rhombohedral structure.     

Fluorination of perovskite-related phases of composition La1−xSrxFe1−yCoyO3−δ

We report here on the fluorination of the perovskite-related phases La_1−xSr_xFe_1−yCo_yO_3−δ. The introduction of fluorine in place of oxygen is achieved through a low-temperature (400 °C) reaction with poly(vinylidene fluoride). X-ray powder diffraction data show that in all cases the fluorination leads to an expansion in the unit cell, which is consistent with partial replacement of oxygen by fluorine and consequent reduction in the oxidation state of iron and/or cobalt. This reduction in oxidation state is confirmed by X-ray absorption- and Mössbauer-spectroscopy. The Mössbauer spectra show complex magnetically split hyperfine patterns for the fluorinated samples, reflecting the interactions between Fe³⁺ ions, which are not possible in oxides containing Fe⁴⁺.     

Electronic and magnetic properties and their response to pressure in Ni2MnB

The electronic structure and magnetic properties of Ni₂MnB upon pressure up to 20 GPa have been studied by using the density functional theory (DFT) method. The results indicate that ferromagnetic ordered Ni₂MnB in L2₁ structure is more stable than the nonmagnetic one. The magnetic moments of Ni and Mn atoms as well as the total magnetic moment of Ni₂MnB are found to decrease weakly with increasing pressure. The pressure derivative of the total magnetic moment is −3.07×10⁻³ GPa⁻¹. The equilibrium bulk modulus and its derivative from the Murnaghan equation of state (EOS) are B₀=247.7 GPa, B′=4.98.