Temperature dependence of the Urbach energy in ordered defect compounds Cu-III3-VI5 and Cu-III5-VI8

Two previous models used with success in Cu-III-VI₂ semiconductors have been employed to study the temperature dependence of the Urbach energy in ordered compounds Cu-III₃-VI₅ and Cu-III₅-VI₈. The model which contains two variable parameters seems to explain better the data over the whole temperature range studied. However, the ordered vacancy or the donor acceptor defect pair in the cation sublattice provides new features in these compounds that need further study.     

Crystal structure, electronic and transport properties of AgSbSe2 and AgSbTe2

Undoped and p- and n-doped AgSbX₂ (X=Se and Te) materials were synthesized by direct fusion technique. The structural properties were investigated by X-ray diffraction and SEM microscopy. The electrical conductivity, thermal conductivity and Seebeck coefficient have been measured as a function of temperature in the range from 300 to 600 K.To enlighten electron transport behaviours observed in AgSbSe₂ and AgSbTe₂ compounds, electronic structure calculations have been performed by the Korringa-Kohn-Rostoker method as well as KKR with coherent potential approximation (KKR-CPA) for ordered (hypothetical AgX and SbX as well as AgSbX₂ approximates) and disordered systems (Ag_1−xSb_xX), respectively. The calculated density of states in the considered structural cases shows apparent tendencies to opening the energy gap near the Fermi level for the stoichiometric AgSbX₂ compositions, but a small overlap between valence and conduction bands is still present. Such electronic structure behaviour well agrees with the semimetallic properties of the analyzed samples.     

Optical and thermoelectric characterizations of electroplated n-Bi2(Te0.9Se0.1)3

Bismuth selenotelluride (Bi₂(Te_0.9Se_0.1)₃) films were electrodeposited at constant current density from acidic aqueous solutions with Arabic gum in order to produce thin films for miniaturized thermoelectric devices. X-ray fluorescence spectroscopy determined film compositions. X-ray diffraction pattern shows that the films as deposited are polycrystalline, isostructural to Bi₂Te₃ and covered by crystallites. Mueller-matrix analysis reveals that the electroplated layers are optically like an isotropic medium. Their pseudo-dielectric functions were determined using mid-infrared spectroscopic ellipsometry. Tauc-Lorentz combined with Drude dispersion relations were successfully used. The energy band gap E_g was found to be about 0.15 eV. Moreover, the fundamental absorption edge was described by an indirect optical band-to-band transition. From Seebeck coefficient measurement, films exhibit n-type charge carrier and the value of thermoelectric power is about −40 μV/K.     

Temperature dependence of the photoluminescence spectra in AgGaS2

The Silver Gallium Sulfide (AgGaS₂) ternary compound is a wide bandgap semiconductor (about 2.7 eV) whose photoluminescence properties are characterized by excitons and donor-acceptor pairs recombinations. We have performed photoluminescence (PL) measurement exciting with the third harmonic (3.5 eV) of a Nd:YAG laser from room temperature down to 10 K at different excitation power. In this work we report the dependence of the ‘green band’ on the excitation power at various temperatures.     

Magnetic properties for the Cu2MnSnSe4 and Cu2FeSnSe4 compounds

Magnetic susceptibility χ measurements in the range from 2 to 300 K were carried out on samples of the Cu₂FeSnSe₄ and Cu₂MnSnSe₄ compounds. It was found that Cu₂FeSnSe₄ was antiferromagnetic showing ideal Curie-Weiss behavior with a Néel temperature T_N of about 19 K and Curie-Weiss temperature θ=−200 K, while for Cu₂MnSnSe₄ the behavior was spin-glass with a freezing temperature T_f of about 22 K and Curie-Weiss temperature θ=−25 K. The spin-glass order parameter q(T), determined from the susceptibility data, was found to be in agreement with the prediction of conventional spin-glass theory.     

Study of magnetotransport in double-layered La1.4Ca1.6Mn2O7 manganite: Presence of nano-ferromagnetic domains in paramagnetic matrix

Double-layered manganite La_1.4Ca_1.6Mn₂O₇ has been synthesized using the solid-state reaction method. It had a metal-to-insulator transition at temperature T_M1≈127 K. The temperature dependence of ac susceptibility showed a broad ferromagnetic transition. The two-dimensional (2D)-ferromagnetic ordering temperature (T_C2) was observed as ≈245 K. The temperature dependence of its low-field magnetoresistance has been studied. The low-field magnetoresistance of double-layered manganite, in the temperature regions between T_M1 and T_C2, has been found to follow 1/T⁵. The observed behaviour of temperature dependence of resistivity and low-field magnetoresistance has been explained in terms of two-phase model where ferromagnetic domains exist in the matrix of paramagnetic regions in which spin-dependent tunneling of charge carriers occurs between the ferromagnetic correlated regions. Based on the two-phase model, the dimension of these ferromagnetic domains inside the paramagnetic matrix has been estimated as ∼12 Å.     

Temperature dependence of thermoelectric properties of Ni-doped CoSb3

Temperature dependences of the Hall coefficient, Hall mobility and thermoelectric properties of Ni-doped CoSb₃ have been characterized over the temperature range from 20 to 773 K. Ni-doped CoSb₃ is an n-type semiconductor and the conduction type changes from n-type to p-type at around 450 K. The temperature for the transition from n-type to p-type increased with increasing Ni content x. The Seebeck coefficient reaches a maximum value near the transition temperature. The electrical resistivity indicates that Co_1−xNi_xSb₃ is a typical semiconductor when x≤0.03 and a degenerate semiconductor when x>0.03. Thermal conductivity analyses show that the lattice component is predominant at lower temperatures and carrier and bipolar components become large at temperatures higher than the transition temperature. The thermoelectric figure of merit reaches a maximum value close to the transition temperature and the largest value, 4.67×10⁻⁴ K⁻¹ at 600 K, was obtained for x=0.05.     

Superconductivity and non-metallicity induced by doping the topological insulators Bi2Se3 and Bi2Te3

We show that by Ca doping the Bi₂Se₃ topological insulator, the Fermi level can be fine tuned to fall inside the band gap and therefore suppresses the bulk conductivity. Non-metallic Bi₂Se₃ crystals are obtained. On the other hand, the Bi₂Se₃ topological insulator can also be induced to become a bulk superconductor, with T_c∼3.8 K, by copper intercalation in the van der Waals gaps between the Bi₂Se₃ layers. Likewise, an as-grown crystal of metallic Bi₂Te₃ can be turned into a non-metallic crystal by slight variation in the Te content. The Bi₂Te₃ topological insulator shows small amounts of superconductivity with T_c∼5.5 K when reacted with Pd to form materials of the type Pd_zBi₂Te₃.     

Electronic structure and transport of Ca3Co2O6 and Ca3CoNiO6

We have calculated the band structure of Ca₃Co₂O₆ and Ca₃CoNiO₆ by using the self-consistent full-potential linearized augmented plane-wave method within density function theory and the generalized gradient approximation for the exchange and correlation potential. The spin-orbit interaction is incorporated in the calculations using a second variational procedure. The relation of these band structure calculations to thermoelectric transport is discussed. The results illustrate that transport is highly anisotropic with much larger mobility in the a-b plane than out of the a-b plane, and the introduction of Ni in Ca₃Co₂O₆ alters its electronic structure and its thermoelectric transport properties.     

Defect properties of CuInSe2 and CuGaSe2

Using first-principles electronic structure theory, we have calculated defect formation energies and defect transition levels in CuInSe₂ and CuGaSe₂. We show that (i) it is easy to form Cu vacancies in CuInSe₂, and (ii) it is also relatively easy to form cation antisite defects (e.g. In_Cu) for this ternary compound. Consequently, defect pairs such as (2V_Cu+In_Cu) have a remarkably low formation enthalpy. As a result, the formation of a series of Cu-poor compounds (CPCs) such as CuIn₅Se₈ and CuIn₃Se₅, is explained as a repeat of (2V_Cu+In_Cu) pairs in CuInSe₂. The very efficient p-type self-doping ability of CuInSe₂ is explained by the easy formation of the shallow Cu vacancies. The electrically benign character of the natural defect in CuInSe₂ is explained in terms of an electronic passivation of the by . For CuGaSe₂, we find that (i) the native acceptor formation energies and transition energy levels are similar to that in CuInSe₂, but the donor formation energy is larger in CuGaSe₂. (ii) The Ga_Cu donor level in CuGaSe₂ is deeper than In_Cu donor level in CuInSe₂, therefore, Ga_Cu behaves as an electron trap in CuGaSe₂, even when it is passivated by V_Cu. We have also calculated the band alignment between the CPCs and CuInSe₂, showing that it could have significant effect on the solar cell performance.     

Temperature dependence of electroresistance for La0.67Ba0.33MnO3 manganite

The influence of dc biasing current on temperature dependence of resistance of La_0.67Ba_0.33MnO₃ bulk sample is reported. A decrease in the resistance (electroresistance) on the application of higher bias current is observed. The electroresistance is maximum at metal-insulator transition temperature (T_MI) and decreases when the temperature is either increased or decreased from T_MI. A two-phase model is proposed to explain the occurrence of electroresistance. The higher bias current leads to an increase in alignment of spins and thus, in turn, leads to an increase in spin stiffness coefficient and decrease in the resistance at T_MI.     

Chiral optical absorption bands in [ ]Cd1−x Mnx Ga2S4 semiconducting compound

[ ]Cd_1−x Mn_x Ga₂S₄ is a semimagnetic semiconductor and it has revealed an exceptional property namely ‘optical activity‘. Therefore, a spectroscopic investigation of chiral absorption bands has been carried out with the view to examine the role of d*-d states of manganese atoms. It has been found that inner transitions of Mn⁺⁺ dominate the spectral region with a special feature, indicating that these transitions show the presence of a substantial contribution from the magnetic dipole moment which rotates the electric vector of the incident polarized radiation. The origin is associated to the lack of a symmetry center caused by the ordered vacancies in this defect compound.     

Li- and V-NMR study of LiVS2

⁷Li- and ⁵¹V-NMR have been measured to make clear the electronic state in a two-dimensional triangular lattice LiVS₂. Knight shift of both ⁷Li- and ⁵¹V-NMR is almost independent of temperature below the phase transition temperature T_c of about 310 K from the paramagnetic state to non-magnetic state. The ⁵¹V- spin-lattice relaxation rate 1/T₁ reveals an exponential temperature dependence below T_c, indicating a gap structure of electronic state. These results are consistent with a non-magnetic state with a trimer singlet of V³⁺ spins below T_c.     

Orbital fluctuations and orbital order in FeCr2S4

Heat-capacity investigations on the ferrimagnetic spinel FeCr₂S₄ poly- and single crystals provide experimental evidence of orbital liquid and orbital glass states. The low-temperature transition in the polycrystals at 10 K arises from orbital order and is very sensitive to the sample stoichiometry. In the single crystals the orbital order is fully suppressed resulting in an orbital glass state with the heat capacity following a strict T² dependence towards zero temperature. At elevated temperatures, FeCr₂S₄ exhibits an unexpected large linear term of about 100 mJ mol⁻¹ K⁻² as the fingerprint of the orbital liquid.     

Study of the microstructure influence on the transport properties of Bi86.5Sb13.5 polycrystalline alloy

This study is focused on the investigation of the transport properties of Bi_86.5Sb_13.5 polycrystalline alloys. Bulk materials were prepared by cold pressing ultrafine powders of alloy and by annealing the resulting pellets. Special care was taken to avoid contamination of the powders. Starting with powders of average grain size of 0.06 μm bulk semi-conducting sample with mean grain size respectively of 0.1, 0.8, 2.5 and 200 μm were obtained. The influence of the grain size on both electrical resistivity, thermal conductivity, thermoelectric power, thermoelectric figure of merit is presented within the range 80-330 K. The thermoelectric properties are discussed and compared with those of single crystals presented in previous studies.     

Optical properties of new photovoltaic materials: AgCuO2 and Ag2Cu2O3

AgCuO₂ and Ag₂Cu₂O₃ are new types of semiconductor materials. A theoretical study is presented for both the electronic and optical properties of these new photovoltaic materials in the framework of density functional theory (DFT). The calculated cohesive energy is −3.606 eV/atom and −3.723 eV/atom for Ag₂Cu₂O₃ and AgCuO₂, respectively. Electronic calculations indicate that AgCuO₂ is a small band gap semiconductor and Ag₂Cu₂O₃ is metallic in nature. The valency state of Cu is divalent in Ag₂Cu₂O₃ and trivalent in AgCuO₂. The largest absorption coefficient of CuO₂ is 332 244, which is significantly greater than that of CuInSe₂, CdTe, GaAs, etc.     

Electronic structure of a thermoelectric material: CsBi4Te6

We have calculated the electronic structure of CsBi₄Te₆ by means of first-principles self-consistent total-energy calculations within the local-density approximation using the full-potential linear-muffin-tin-orbital method. From our calculated electronic structure we have calculated the frequency dependent dielectric function. Our calculations shows that CsBi₄Te₆ a semiconductor with a band gap of 0.3 eV. The calculated dielectric function is very anisotropic. Our calculated density of state support the recent experiment of Chung et al. [Science 287 (2000) 1024] that CsBi₄Te₆ is a high performance thermoelectric material for low temperature applications.     

Magnetic and transport properties of SmCoAsO1−xFx

A series of SmCoAsO_1−xF_x (with x=0, 0.05, 0.1, and 0.2) samples have been prepared by solid state reactions. X-ray powder diffraction proved that all samples can be indexed as a tetragonal ZrCuSiAs-type structure. A clear shrinkage of the lattice constants a and c with increasing F content indicated that F has been doped into the lattice. The magnetic and transport properties of the samples have been investigated. Parent SmCoAsO compound exhibited complicated magnetism including antiferromagnetism, ferromagnetism, and ferrimagnetism. For the fluorine doped samples, the antiferromagnetic Néel temperatures were almost independent of the F content and metamagnetic transitions were observed below antiferromagnetic Néel temperatures. With increasing F content, high temperature (below 142 K) ferrimagnetic state gradually changed to ferromagnetic state. In the resistivity result, metallic conduction in the region of 2-300 K and Fermi liquid behavior at low temperatures were shown in all samples. Transport properties at applied magnetic fields showed anomalies at low temperatures.     

Electron hopping mechanism in hematite (α-Fe2O3)

The frequency dependence of the real (?′) and imaginary (?″) parts of the dielectric constant of polycrystalline hematite (α-Fe₂O₃) has been investigated in the frequency range 0-100 kHz and the temperature range 190-350 K, in order to reveal experimentally the electron hopping mechanism that takes place during the Morin transition of spin-flip process. The dielectric behaviour is described well by the Debye-type relaxation (α-dispersion) in the temperature regions T<233 K and T>338 K. In the intermediate temperature range 233 K<T<338 K a charge carrier mechanism takes place (electron jump from the O²⁻ ion into one of the magnetic ions Fe³⁺) which gives rise to the low frequency conductivity and to the Ω-dispersion. The temperature dependence of relaxation time (τ) in the −ln τ vs 10³/T plot shows two linear regions. In the first, T<238 K, τ increases with increasing T implying a negative activation energy −0.01 eV, and in the second region T>318 K τ decreases as the temperature increases implying a positive activation energy 0.12 eV. The total reorganization energy (0.12-0.01) 0.11 eV is in agreement with the adiabatic activation energy 0.11 eV given by an ab initio model in the literature. The temperature dependence of the phase shift in the frequencies 1, 5, 10 kHz applied shows clearly an average Morin temperature T_Mo=284±1 K that is higher than the value of 263 K corresponding to a single crystal due to the size and shape of material grains.     

Bandlike and localized defect states in CuInSe2 solar cells

We used the deep-level transient spectroscopy (DLTS) to investigate the electronic properties of p-type CuInSe₂ (CIS) polycrystalline thin-film solar cells. We detected electron (or minority) traps with activation energies ranging from E_c−0.1 to E_c−0.22 eV (where E_c is the energy of electrons at the conduction band minimum). While varying the filling pulse duration, we observed the gradual increase in the amplitude of the DLTS signal for these states until it apparently saturates at a pulse duration ∼1 s. Increasing the duration of the filling pulse also results in broadening the DLTS signals and shifting the maximum of these signals towards lower temperature, whereas the high-temperature sides coincide. We also detected a hole (or majority) trap around a temperature of 190 K. Using a model that allows us to distinguish between bandlike states and localized ones based on the dependence of the shape of their DLTS-signal on the filling-pulse duration, we relate the electron trap to bandlike states and the hole trap to localized ones.