Dissolution of iron oxide nanoparticles inside polymer nanocapsules

The structure of poly(organosiloxane) nanocapsules partially filled with iron oxide cores of different sizes was revealed by small angle X-ray scattering and X-ray diffraction. The nanocapsules are synthesized by the formation of a poly(organosiloxane) shell around iron oxide nanoparticles and the simultaneous partial dissolution of these cores. Due to the high scattering contrast of the iron oxide cores compared to the polymer shell, the particle size distribution of the cores inside the capsules can be measured by small angle X-ray scattering. Additional information can be revealed by X-ray diffraction, which gives insights into the formation of the polymer network and the structure of the iron oxide cores. The study shows how the crystallinity and size of the nanoparticles as well as the shape and width of the size distribution can be altered by the synthesis parameters.     

Synthesis of Monodisperse Hollow Carbon Nanocapsules by Using Protective Silica Shells

Monodisperse hollow carbon nanocapsules (<200 nm) with mesoporous shells were synthesized by coating their outer shells with silica to prevent aggregation during their high‐temperature annealing. Monodispersed silica nanoparticles were used as starting materials and octadecyltrimethoxysilane (C18TMS) was used as a carbon source to create core–shell nanostructures. These core–shell nanoparticles were coated with silica on their outer shell to form a second shell layer. This outer silica shell prevented aggregation during calcination. The samples were characterized by TEM, SEM, dynamic light scattering (DLS), UV/Vis spectroscopy, and by using the Brunauer–Emmett–Teller (BET) method. The as‐synthesized hollow carbon nanoparticles exhibited a high surface area (1123 m² g^?1) and formed stable dispersions in water after the pegylation process. The drug‐loading and drug‐release properties of these hollow carbon nanocapsules were also investigated.     

Core/Shell Structured PCM Nanocapsules Obtained by Resin Fortified Emulsion Process

Phase change material (PCM, octadecane) nanocapsules were successfully prepared by resin fortified emulsion (RFE) polymerization using the alkali soluble resin (ASR) of poly(ethylene‐co‐acrylic acid) (EAA) and poly(styrene‐co‐acrylic acid) (SAA). Stable PCM nanocapsules were obtained by resin fortified emulsion polymerization, which could be attributed to the prevention of Ostwald ripening due to PCM being hydrophobic. Analysis of online FTIR measurements throughout the reaction confirmed that the nanocapsules contained octadecane as a PCM. TEM imaging of the PCM nanocapsules showed spherical and core/shell morphology. The characteristics of PCM nanocapsules can be controlled by process parameters. As a result, the particle size and particle size distribution (i.e., polydispersity index (Dw/Dn)) of the PCM nanocapsules were created by adjusting manufacturing conditions. The PCM nanocapsules exhibited thermal energy storage (～49.8 J/g) and release (～47.9 J/g) behavior.     

Polymeric nanocapsules ultra stable in complex biological media

Non-specific protein adsorption from complex biological media, especially from blood plasma, is an urgent challenge for the application of nanoparticles as delivery systems, diagnostics, and other biomedical application. Nanocapsules (NC) prepared from FDA-approved degradable poly(ɛ-caprolactone) shell and Mygliol 812^® oil in the core were coated with mono-methoxy terminated oligo(ethylene glycol) methacrylate (poly(MeOEGMA)) polymer brush layers with a well-controlled thickness at the nanometer scale up to 350 nm using surface initiated atom transfer radical polymerization in water or phosphate buffered saline. Incubation of uncoated NC with human serum albumin solution, fetal bovine serum, or human blood plasma resulted in fast aggregation observed by dynamic light scattering as an increase in diameter of particles present in the solutions. Conversely, these biological fluids affected only marginally the size distribution of the NC coated with a 60 nm thick poly(MeOEGMA) layer. The high suspension stability of the coated NC in complex biological fluids was related to the suppressed deposition of proteins from these fluids observed by surface plasmon resonance (SPR) on analogous poly(MeOEGMA) layer prepared on flat surfaces of SPR chips.     

Preparation of highly dispersed core/shell-type titania nanocapsules containing a single Ag nanoparticle

Core/shell-type titania nanocapsules containing a single Ag nanoparticle were prepared. Ag nanoparticles were prepared using the reduction of silver nitrate with hydrazine in the presence of cetyltrimethylammonium bromide (CTAB) as protective agent. The sol-gel reaction of titanium tetraisopropoxide (TTIP) was used to prepare core/shell-type titania nanocapsules with CTAB-coated Ag nanoparticles as the core. TEM observations revealed that the size of the core (Ag particle) and the thickness of the shell (titania) of the core/shell particles obtained are about 10 nm and 5-10 nm, respectively. In addition, the nanocapsules were found to be dispersed in the medium as individual particles without aggregation. Moreover, titania coating caused the surface plasmon absorption of Ag nanoparticles to shift toward the longer wavelength side.     

Temperature-responsive ionic-crosslinked polymeric nanocapsules via 'self-templating' approach

The temperature-responsive ionic-crosslinked polymeric nanocapsules (TRICNs) were fabricated via the 'self-templating' approach from the poly(tert-butyl acrylate-co-N-isopropylacrylamide-co-acrylic acid) (poly(tBA-co-NIPAm-co-AA)) terpolymer nanoparticles prepared via the emulsifier-free emulsion polymerization. After the surface carboxyl groups of the terpolymer nanoparticles were crosslinked with calcium ions, the TRICNs were achieved after the cores of the shell-crosslinked nanoparticles had been etched by being dissolved with acetone. Transmission electron microscope (TEM) showed the particle size of the individual nanocapsules was about 200 nm with the inner diameter of about 140 nm. The lower critical solution temperature (LCST) of the TRICNs was found to be about 31°C from the dynamic light scattering (DLS) analysis. Furthermore, the nanocapsules could disintegrate in acidic media while they were stable in the neutral or alkaline media.     

Synthesis and applications of shell cross-linked thermoresponsive hybrid micelles based on poly(N-isopropylacrylamide-co-3-(trimethoxysilyl)propyl methacrylate)-b-poly(methyl methacrylate)

Shell cross-linked (SCL) thermoresponsive hybrid micelles consisting of a cross-linked thermoresponsive hybrid hydrophilic shell and a hydrophobic core domain were synthesized from poly(N-isopropylacrylamide-co-3- (trimethoxysilyl)propyl methacrylate)-b-polymethyl methacrylate (P(NIPAAm-co-MPMA)-b-PMMA) amphiphilic block copolymers. Transmission electron microscopy (TEM) images showed that the SCL micelles formed regularly globular nanoparticles. The SCL micelles showed reversible dispersion/aggregation in response to temperature cycles through an outer polymer shell lower critical solution temperature (LCST) for PNIPAAm at around 33 degrees C, observed by turbidity measurements and dynamic light scattering (DLS). The drug loading and in vitro drug release properties of the SCL micelles bearing a silica-reinforced PNIPAAm shell were further studied, which showed that the SCL micelles exhibited a much improved entrapment efficiency (EE) as well as a slower release rate which allowed the entrapped molecules to be slowly released over a much longer period of time as compared with pure PNIPAAm-b-PMMA micelles.     

Temperature-responsive magnetite/PEO-PPO-PEO block copolymer nanoparticles for controlled drug targeting delivery

In this study, temperature-responsive magnetite/polymer nanoparticles were developed from iron oxide nanoparticles and poly(ethyleneimine)-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer. The particles were characterized by TEM, XRD, DLS, VSM, FTIR, and TGA. A typical product has an approximately 20 nm magnetite core and an approximately 40 nm hydrodynamic diameter with a narrow size distribution and is superparamagnetic with large saturation magnetization (51.34 emu/g) at room temperature. The most attractive feature of the nanoparticles is their temperature-responsive volume-transition property. DLS results indicated that their average hydrodynamic diameter underwent a sharp decrease from 45 to 25 nm while evaluating the temperature from 20 to 35 degrees C. The temperature-dependent evolution of the C-O stretching band in the FTIR spectra of the aqueous nanoparticles solution revealed that thermo-induced self-assembly of the immobilized block copolymers occurred on the magnetite solid surfaces, which is accompanied by a conformational change from a fully extended state to a highly coiled state of the copolymer. Consequently, the copolymer shell could act as a temperature-controlled "gate" for the transit of guest substance. The uptake and release of both hydrophobic and hydrophilic model drugs were well controlled by switching the transient opening and closing of the polymer shell at different temperatures. A sustained release of about 3 days was achieved in simulated human body conditions. In primary mouse experiments, drug-entrapped magnetic nanoparticles showed good biocompatibility and effective therapy for spinal cord damage. Such intelligent magnetic nanoparticles are attractive candidates for widespread biomedical applications, particularly in controlled drug-targeting delivery.     

含水核载牛血清白蛋白聚氰基丙烯酸丁酯微囊的制备及体外释放

利用界面乳液聚合方法制备了新型含水核载牛血清白蛋白 (BSA)的聚氰基丙烯酸丁酯 (PBCA)纳米微囊 .分别研究了纳米微囊的粒径及其分布 ,表面Zeta电势的变化 .并以牛血清白蛋白为模型药物考察了药物包裹率和载药量的变化以及载药纳米微囊在磷酸缓冲溶液中的体外释放行为 .结果表明 ,所制备的纳米微囊平均粒径为 2 0 0nm ,多分散度为 0 2 2 6;表面Zeta电势的变化证明了BSA是包裹于纳米微囊的内部而不是吸附在其表面 ;包裹率和载药量取决于水相中BSA的初始浓度 ,当BSA的浓度为 0 8mg mL时 ,包裹率和载药量分别为 3 5 %和 0 485× 1 0 - 9mol mg;药物的释放速率取决于纳米微囊的壁厚 ,通过调节壁厚可以达到控释的目的     

"Two-in-one" fabrication of Fe3O4/MePEG-PLA composite nanocapsules as a potential ultrasonic/MRI dual contrast agent

A new method for the fabrication of Fe(3)O(4) nanoparticles enveloped by polymeric nanocapsules is proposed. This method is characterized by combining a double emulsification with the interfacial coprecipitation of iron salts to form Fe(3)O(4)/polymer composite nanocapsules in a single step. To demonstrate the viability of this approach, methoxy poly(ethylene glycol)-poly(lactide) (MePLEG) was chosen as the shell material for Fe(3)O(4)/MePLEG nanocapsules. In addition to the versatility offered for fabricating nanocapsules with different shell materials, the method was found to be convenient for adjusting the magnetite content of the nanocapsules from 0 to 43%. In addition to their confirmed T(2)-weighted magnetic resonance imaging (MRI) enhancement, the resultant composite nanocapsules display much more obvious acoustic responses than MePLEG nanocapsules in an acoustic investigation. Furthermore, the low toxicity of these composite nanocapsules, as confirmed by our study, combined with their magnetic and acoustic properties ensure that these composite nanocapsules have great potential in acting as ultrasonic/MRI dual contrast agents.     

具有温度响应壳层的金纳米粒子的制备

利用可逆-加成断裂链转移聚合得到全亲水性的嵌段共聚物(PEO-b-PNIPAM), 通过"grafting to"使其接枝到金纳米粒子表面. 通过透射电子显微镜、 紫外-可见吸收光谱、 能谱分析及动态光散射研究了杂化的金纳米粒子的壳层结构及温度响应行为. 实验结果表明, 得到核壳结构的金纳米粒子, 同时其壳层具有温度响应行为. 随着温度的升高, 其流体力学半径略有减小. 在整个升温过程中, 由于外层PEO链段的抑制作用, 没有发生粒子间的聚集.     

Ag Nanocomposite Particles: Preparation,Characterization and Application

Summary Herein, we report that different core-shell particles could be successfully used as the carrier systems for the deposition of silver nanoparticles. Firstly, thermosensitive core-shell microgel particles have been used as the carrier system for the deposition of Ag nanoparticles, in which the core consists of poly (styrene) (PS) whereas the shell consists of poly (N-isopropylacrylamide) (PNIPA) network cross-linked by N, N′-methylenebisacrylamide (BIS). Immersed in water the shell of these particles is swollen. Heating the suspension above 32 °C leads to a volume transition within the shell, which is followed by a marked shrinking of the network of the shell. Secondly, “nano-tree” type polymer brush can be used as “nanoreactor” for the generation of silver nanoparticles also. This kind of carrier particles consists of a solid core of PS onto which bottlebrush chains synthesized by the macromonomer poly (ethylene glycol) methacrylate (PEGMA) are affixed by “grafting from” technique. Thirdly, silver nanoparticles can be in-situ immobilized onto polystyrene (PS) core-polyacrylic acid (PAA) polyelectrolyte brush particles by UV irradiation. Monodisperse Ag nanoparticles with diameter of 8.5 nm, 7.5 nm and 3 nm can be deposited into thermosensitive microgels, “nano-tree” type polymer brushes and polyelectrolyte brush particles, respectively. Moreover, obtained silver nano-composites show different catalytic activity for the catalytic reduction of p-nitrophenol depending on the carrier system used for preparation.     

Preparation of Hybrid Nanocapsules

Hybrid nanoparticles with a polystyrene core and a hybrid copolymer shell were used to produce hybrid nanocapsules by dissolving the polystyrene core from the previously elaborated core-shell particles. Following previous works, the core-shell particles were prepared by emulsion polymerization of styrene and subsequent addition of γ-methacryloxy propyl trimethoxy silane (MPS) to produce the shell by copolymerization reaction of MPS with the residual styrene. Core extraction was performed by diluting the core-shell particles in an excess of tetrahydrofuran (THF). Two procedures were investigated to separate the dissolved polymer chains from the nanocapsules. In the first procedure, the polymer was isolated by successive centrifugation and redispersion in THF, whereas in the second procedure, the free polymer chains were removed by dialysis. The polymer molecular weight was optimized in order to promote dissolution of the polymer chains and allow them to diffuse through the shell.     

Thermally reversible pluronic/heparin nanocapsules exhibiting 1000-fold volume transition

Novel Pluronic/heparin composite nanocapsules that exhibit a thermally responsible swelling and deswelling behavior were synthesized. Pluronic F-127 preactivated with p-nitrophenyl chloroformate at its two terminal hydroxyl groups was dissolved in a methylene chloride phase. The organic phase was dispersed in an aqueous phase containing heparin. At an organic/aqueous interface, Pluronic-cross-linked heparin nanocapsules were produced. They exhibited a 1000-fold volume transition (ca. 336 nm at 25 degrees C; ca. 32 nm at 37 degrees C), and a reversible swelling and deswelling behavior when the temperature was cycled between 20 and 37 degrees C. The reversible volume transition of Pluronic nanocapsules was caused by micellization and demicellization of cross-linked Pluronic polymer chains within the nanocapsule structure in response to temperature. The morphological characters were investigated with transmission electron microscopy and small angle neutron scattering. Pluronic/heparin nanocapsules had an aqueous fluid-filled hollow interior with a surrounding shell layer below the critical temperature, but they became a collapsed core/shell structure similar to that of Pluronic micelles above it.     

Synthesis of polymeric nanocapsules by radical UV‐activated interface‐emulsion polymerization

A new methodology is reported that allows a better control of the synthesis of polymeric core–shell nanocapsules. These nanocapsules were made of biocompatible polymers, obtained from poly(ethylene glycol)diacrylate and poly(ethylene glycol) methyl ether methacrylate, and were used as carrier for curcumin as therapeutic agent. The impact of manufacturing factors (time of sonication, time of UV irradiation, and type of monomer) was investigated in relation to the average size of nanocapsules, their distribution, shape, composition, stability, and their capability to deliver curcumin. We successfully synthesized core–shell nanocapsules in various sizes, ranging from 80 nm to 300 nm, by acting either on the process conditions or on the composition of the monomer mixture. This wide range of sizes makes the method here proposed very promising for the production of nanocarriers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3357–3369     

Facile fabrication of thermally responsive Pluronic F127-based nanocapsules for controlled release of doxorubicin hydrochloride

Novel core–shell-structured Pluronic-based nanocapsules with thermally responsive properties were successfully prepared using a modified emulsification/solvent evaporation method. The nanocapsules were constructed through the cross-linking reaction between p-nitrophenyl-activated Pluronic F127 and hyaluronic acid (HA) (named Pluronic F127/HA) or poly(ε-lysine) (PL) (named Pluronic F127/PL) at the organic/aqueous interface. The formation, size, and thermal responsiveness of the nanocapsules were characterized by ¹H NMR, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The resultant shell-cross-linked nanocapsules exhibit a larger volume transformation (26 times change in volume for Pluronic F127/HA and 31 times for Pluronic F127/PL) over a temperature range of 4–37 °C because of the temperature-dependent dehydration of cross-linked Pluronic F127 polymer chains. The nanocapsules are about 72?±?4 nm (polydispersity index [PDI]?=?0.08) for Pluronic F127/PL (69?±?5 nm, PDI?=?0.10 for Pluronic F127/HA) at 37 °C with narrow size distribution and expand to about 226?±?23 nm (PDI?=?0.34) for Pluronic F127/PL (206?±?20 nm, PDI?=?0.3) for Pluronic F127/HA at 4 °C with broad size distribution in aqueous solutions. The nanocapsules were used to encapsulate and control the release of doxorubicin hydrochloride (DOX·HCl) in aqueous solution. DOX·HCl was physically encapsulated in the nanocapsules using a soaking–freeze-drying–heating procedure. The release curve and release kinetics disclosed that the thermally responsive hollow nanocapsules are good carries for drug delivery.     

Controlled release of DNA from photoresponsive hyperbranched polyglycerols with oligoamine shells

Two photo-responsive core/shell nanoparticles based on hyperbranched polyglycerol (hPG) are synthesized for controlled release of DNA. The shell is composed either of bis-(3-aminopropyl)methylamine (AMPA) or pentaethylenehexamine (PEHA) derivatives and is attached to the hPG core with a photo-responsive o-nitrobenzyl linker. Ethidium bromide displacement assay, gel electrophoresis, DLS, and ζ-potential measurements are performed with these nanoparticles. Photo-responsive changes within the carrier scaffold are investigated by irradiating the polymer solution with 350 nm monochromatic light. Fully covered APMA-shelled carriers are found to complex the DNA at an N/P ratio of 10 with an average size ranging from 54 to 78 nm depending on the degree of functionalization of the core.     

Single nanoparticle plasmonic devices by the "grafting to" method

Hierarchically organized single-nanoparticle structures synthesized in this work consisted of a 200 nm silica core and a pH-responsive poly(2-vinylpyridine) shell decorated with 15 nm gold nanoparticles. pH changes in the range of 3-6 back and forth results in a swelling-shrinking polymer brush shell and, thus, in the tuning distance between noble nanoparticles. A change in the interparticle distance is accompanied by a very pronounced shift in the maximum wavelength of the surface plasmon absorption peak. The dispersion of the resulting composite nanoparticles reversibly changed color from red to purple-blue as the pH changed from 2.5 to 6. Such hierarchically assembled nanostructures can be used as free-standing single-particle sensors in various miniaturized analytical systems.     

Optically active core/shell nanoparticles prepared using self‐assembled polymer micelle as reactive nanoreactor

This article reports on optically active core/shell nanoparticles constituted by chiral helical polymers and prepared by a novel approach: using self‐assembled polymer micelles as reactive nanoreactors. Such core/shell nanoparticles were composed of optically active helical‐substituted polyacetylene as the core and thermosensitive poly(N‐isopropylacrylamide) as the shell. The synthetic procedure is divided into three major steps: (1) synthesis of amphiphilic diblock copolymer bearing polymerizable C[tbond]C bonds via atom transfer radical polymerization, followed by (2) self‐assembly of the diblock copolymer to form polymer micelles; and (3) catalytic emulsion polymerization of substituted acetylene monomer conducted using the polymer micelles as reactive nanoreactors leading to the core/shell nanoparticles. The core/shell nanoparticles simultaneously exhibited remarkable optical activity and thermosensitivity. The facile, versatile synthesis methodology opens new approach toward preparing novel multifunctional core/shell nanoparticles.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

pH‐responsive polymer core–shell nanospheres for drug delivery

Stimuli‐responsive polymer nanoparticles are playing an increasingly more important role in drug delivery applications. However, limited knowledge has been accumulated about processes which use stimuli‐responsive polymer nanospheres (matrix nanoparticles whose entire mass is solid) to carry and deliver hydrophobic therapeutics in aqueous solution. In this research, pyrene was selected as a model hydrophobic drug and a pyrene‐loaded core‐shell structured nanosphere named poly(DEAEMA)‐poly(PEGMA) was designed as a drug carrier where DEAEMA and PEGMA represent 2‐(diethylamino)ethyl methacrylate and poly(ethylene glycol) methacrylate, respectively. The pyrene‐loaded core‐shell nanospheres were prepared via an in situ two‐step semibatch emulsion polymerization method. The particle size of the core‐shell nanosphere can be well controlled through adjusting the level of surfactant used in the polymerization where an average particle diameter of below 100 nm was readily achieved. The surfactant was removed via a dialysis operation after polymerization. Egg lecithin vesicles (liposome) were prepared to mimic the membrane of a cell and to receive the released pyrene from the nanosphere carriers. The in vitro release profiles of pyrene toward different pH liposome vesicles were recorded as a function of time at 37 °C. It was found that release of pyrene from the core‐shell polymer matrix can be triggered by a change in the environmental pH. In particular the pyrene‐loaded nanospheres are capable of responding to a narrow window of pH change from pH = 5, 6, to 7 and can achieve a significant pyrene release of above 80% within 90 h. The rate of release increased with a decrease in pH. A first‐order kinetic model was proposed to describe the rate of release with respect to the concentration of pyrene in the polymer matrix. The first‐order rate constant of release k was thus determined as 0.049 h^?1 for pH = 5; 0.043 h^?1 for pH = 6; and 0.035 h^?1 for pH = 7 at 37 °C. The release of pyrene was considered to follow a diffusion‐controlled mechanism. The synthesis and encapsulation process developed herein provides a new approach to prepare smart nanoparticles for efficient delivery of hydrophobic drugs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4440–4450