Heterostructured magnetic nanotubes

Heterostructured magnetic tubes with submicrometer dimensions were assembled by the layer-by-layer deposition of polyelectrolytes and nanoparticles in the pores of track-etched polycarbonate membranes. Multilayers composed of poly(allylamine hydrochloride) and poly(styrene sulfonate) assembled at high pH (pH > 9.0) were first assembled into the pores of track-etched polycarbonate membranes, and then multilayers of magnetite (Fe3O4) nanoparticles and PAH were deposited. Transmission electron microscopy (TEM) confirmed the formation of multilayer nanotubes with an inner shell of magnetite nanoparticles. These tubes exhibited superparamagnetic characteristics at room temperature (300 K) as determined by a SQUID magnetometer. The surface of the magnetic nanotubes could be further functionalized by adsorbing poly(ethylene oxide)-b-poly(methacrylic acid) block copolymers. The separation and release behavior of low molecular weight anionic molecules (i.e., ibuprofen, rose bengal, and acid red 8) by/from the multilayer nanotubes were studied because these tubes could potentially be used as separation or targeted delivery vehicles. The magnetic tubes could be successfully used to separate (or remove) a high concentration of dye molecules (i.e., rose bengal) from solution by activating the nanotubes in acidic solution. The release of the anionic molecules in physiologically relevant buffer solution showed that whereas bulky molecules (e.g., rose bengal) release slowly, small molecules (i.e., ibuprofen) release rapidly from the multilayers. The combination of the template method and layer-by-layer deposition of polyelectrolytes and nanoparticles provides a versatile means to create functional nanotubes with heterostructures that can be used for separation as well as targeted delivery.     

Enhancement of magnetic resonance contrast effect using ionic magnetic clusters

Precise diagnosis by magnetic resonance imaging (MRI) requires sensitive magnetic resonance probes to detect low concentrations of magnetic substances. Ionic magnetic clusters (IMCs) as versatile magnetic probes were successfully synthesized for enhancing the magnetic resonance (MR) contrast effect as well as ensuring high water solubility. IMCs with various sizes were prepared by assembly of MNCs using cationic cetyltrimethylammonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS). To synthesize IMCs in the aqueous phase, magnetic nanocrystals in an organic solvent were assembled with CTAB and SDS using the nanoemulsion method, to fabricate cationic magnetic clusters (CMCs) and anionic magnetic clusters (AMCs), respectively. IMCs demonstrated ultrasensitivity by MR imaging and sufficient magnetic mobility under an external magnetic field.     

Preparation of magnetic polymer colloids with Brownian magnetic relaxation

Magnetic polymer colloids (MPCs) consisting of CoFe₂O₄ nanoparticles (NPs) embedded in a poly(methyl methacrylate) (PMMA) matrix were synthesized by magnetic miniemulsion polymerization. CoFe₂O₄ NPs were modified with 3-trimethoxysilylpropylmethacrylate and directly emulsified with different concentrations of sodium dodecyl sulfate under ultrasonication for subsequent miniemulsion polymerization. The average diameter of the CoFe₂O₄/PMMA spheres (about 200 nm) was controlled by varying the amount of surfactant. Thermogravimetric analysis indicated that the magnetic content was in the range of 44 to 73 %. Magnetic properties of the dispersions were investigated by measuring equilibrium magnetization curves and the dynamic magnetic susceptibility as a function of frequency. The MPCs were found to follow the Debye model for the dynamic magnetic susceptibility, with a characteristic time given by the rotational hydrodynamic resistance and thermal energy through the Stokes-Einstein relation. This demonstrates that the MPCs respond to applied magnetic fields by rotating. Due to their uniform size and high magnetic loading, these colloids may be suitable in a variety of applications, including nanoscale mechanical probes and actuators in complex fluids and biological systems.     

Detailed magnetic study on the formato-bridged MOFs with anion-tunable magnetic properties

Detailed studies of the structures, magnetic properties and photodimerization of a series of formato-bridged MOFs with the general formula M2(HCOO)3(4,4′-bpe)3(H2O)3(X) (4,4′-bpe = 4,4′-bipyridylethylene, M = Mn (1-X-), X- = ClO4-, NO3-, BF4-, I-, Br-; M = Co (2-X-), X- = ClO4-, NO-3; M = Zn (3-X-), X- = NO3-) were reported. Careful magnetic measurements on an ori- ented single crystal of 1-ClO4- determined the spin-flop magnetic phase diagram and some intrinsic parameters, such as the intralayer coupling J, the anisotropy field HA and the exchange field HE. Different anions can remarkably tune the magnetic properties of 1-X-, especially the critical fields of the spin-flop transition. Compound 2-ClO4- remained paramagnetic down to 2 K.     

Synthesis and magnetic properties of a porphine-based photosynthesizer with magnetic nano-carriers

The coupling of benzyl protected dopamine with meso-tetra(4-carboxyphenyl)porphine (m-TCPP) and a simple deprotection by hydrogenation under catalyst (Pd/C) to remove the benzyl groups afforded the meso-tetra(4-carboxyphenyl)porphine-dopamine conjugate, m-TCPPD (1). Previously prepared superparamagnetic iron oxide nanoparticles (SPIONs) were coated with m-TCPPD by sonication in methanol, and then the m-TCPPD coated SPIONs (2) were separated with a permanent magnet. The microstructure and magnetic properties of the m-TCPPD coated SPIONs were characterized by UV, ¹H NMR, MALDI MS, XRD, TEM, FT-IR, TGA and VSM. The crystallite size obtained from X-ray line profile fitting is comparable with the particle size obtained from TEM. Magnetization measurements reveal that m-TCPPD coated SPIONs do not reach saturation even at high fields. The absence of remanance and weak magnetization, which are characteristic features of superparamagnetics, has been observed. The average particle size has been determined, by fitting the Langevin function to the experimental M−H hysteresis curves, as approximately 8 nm.     

A comparative study on thermoresponsive magnetic nanohydrogels: role of surface-engineered magnetic nanoparticles

A comparative study of thermoresponsive poly(N-isopropylacrylamide)(PNIPAAm)-chitosan (CS)-based magnetic nanohydrogels (MNHGs) encapsulating functionalized Fe₃O₄ nanoparticles (NPs) in terms of the parameters governing their suitability for real hyperthermia is reported. Iron oxide NPs functionalized with (a) citric acid (CA-Fe₃O₄), (b) ethylenediamine (Amine-Fe₃O₄) and (c) dimercaptosuccininc (DMSA-Fe₃O₄) have been synthesized and their encapsulation into MNHGs was obtained through physical encapsulation method. The structural characterizations of synthesized materials include X-ray diffraction, FT-IR, TGA, ICP-AES and X-ray photoelectron spectroscopy (XPS). Encapsulation of the functionalized NPs into MNHGs were observed in TEM micrographs, while SEM and AFM micrographs confirmed their spherical morphology (~250–300 nm). Lower critical solution temperature (LCST) variation was measured by UV–visible spectrophotometer and differential scanning calorimetry (DSC). MNHGs exhibited sufficient magnetization and heating ability for hyperthermia. Typically, hydrogels containing CA-Fe₃O₄ (50 mg/ml) raised the temperature of the medium to 43 °C, a suitable dose for in vivo application in tumor-bearing mice.     

Sub-100 nm confinement of magnetic nanoparticles using localized magnetic field gradients

Ferromagnetic rods containing thin sections of diamagnetic metal create intense magnetic field gradients that attract and confine magnetic nanoparticles to regions of space as small as 20 nm. The rods (80 nm diameter) comprised alternating sections of CoNi ( approximately 350 nm) and Au (20-160 nm) formed by electrodeposition into porous polycarbonate membranes. Upon magnetizing the rods, large magnetic gradients (106-107 T/m) form at the boundaries between ferromagnetic and diamagnetic sections. These gradients attract and confine magnetic nanoparticles to attoliter volumes of space surrounding the rod. This method provides a new tool for generating intense, highly localized magnetic field gradients, by design, and confining magnetic nanoparticles in these gradients.     

Gold and gold-iron oxide magnetic glyconanoparticles: synthesis, characterization and magnetic properties

The preparation, characterization and the magnetic properties of gold and gold-iron oxide glyconanoparticles (GNPs) are described. Glyconanoparticles were prepared in a single step procedure in the presence of aqueous solution of thiol functionalized neoglycoconjugates and either gold salts or both gold and iron salts. Neoglycoconjugates of lactose and maltose disaccharides with different linkers were used. Iron-free gold or gold-iron oxide GNPs with controlled gold-iron ratios were obtained. The average core-size diameters are in the range of 1.5-2.5 nm. The GNPs are fully characterized by (1)H NMR spectrometry, transmission electron microscopy (TEM), and UV-vis and X-ray absorption (XAS) spectroscopies. Inductive plasma-atomic emission spectrometry (ICP) and elemental analysis gave the average number of neoglycoconjugates per cluster. The magnetic properties were measured in a SQUID magnetometer. The most remarkable results was the observation of a permanent magnetism up to room temperature in the iron-free gold GNPs, that was not present in the corresponding gold-iron oxide GNPs.     

Superior magnetic monodisperse particles for direct purification of immunoglobulin G under magnetic field

Monodisperse magnetic acrylate based particles (5.0 µm in diameter) containing histidine were synthesized using a modified suspension polymerization method for the purification of immunoglobulin G from human plasma in a magnetically stabilized fluidized bed. N-methacryloyl-(L)-histidine methyl ester (MAH) was used as pseudo-specific ligand/co-monomer. MAH content of the magnetic particles was calculated as 55.3 µmol MAH/g polymer using elemental analysis. Immunoglobulin G binding amount of the magnetic particles decreased with increase of the flow-rate. The maximum immunoglobulin G binding was observed at pH 7.4 (phosphate buffer). Immunoglobulin G binding amount onto the magnetic poly(ethylene glycol dimethacrylate) [mPEGDMA] particles was found to be almost negligible due to the hydrophilic polymer structure. High binding values were obtained from aqueous solutions (1646 mg/g). Higher immunoglobulin G binding was observed when human plasma was used (2169 mg/g). Purity of the separated immunoglobulin G from human plasma was found to be 87%. Magnetic PEGDMAH particles could be used many times without significant loss in protein binding amount.     

Spectroscopic investigation of magnetic dipole allowed transitions through the magnetic transition moment

An experimental technique for detecting magnetic dipole allowed transitions by their dispersion-induced circular dichroism (DICD) is discussed. The DICD spectra of three nitrogen heterocycles (pyridine, pyrazine and tetraphenylporphyrin) are shown to be dominated by the n — π^* transitions, as distinct from the normal absorption spectra which are dominated by the electric dipole allowed π — π^* bands.     

Covariance nuclear magnetic resonance spectroscopy

Covariance nuclear magnetic resonance (NMR) spectroscopy is introduced, which is a new scheme for establishing nuclear spin correlations from NMR experiments. In this method correlated spin dynamics is directly displayed in terms of a covariance matrix of a series of one-dimensional (1D) spectra. In contrast to two-dimensional (2D) Fourier transform NMR, in a covariance spectrum the spectral resolution along the indirect dimension is determined by the favorable spectral resolution obtainable along the detection dimension, thereby reducing the time-consuming sampling requirement along the indirect dimension. The covariance method neither involves a second Fourier transformation nor does it require separate phase correction or apodization along the indirect dimension. The new scheme is demonstrated for cross-relaxation (NOESY) and J-coupling based magnetization transfer (TOCSY) experiments.     

Differential magnetic catch and release: experimental parameters for controlled separation of magnetic nanoparticles

Differential magnetic catch and release (DMCR) has been used as a method for the purification and separation of magnetic nanoparticles. DMCR separates nanoparticles in the mobile phase by magnetic trapping of magnetic nanoparticles against the wall of an open tubular capillary wrapped between two narrowly spaced electromagnetic poles. Using Au and CoFe(2)O(4) nanoparticles as model systems, the loading capacity of the 250 μm diameter capillary is determined to be ～130 μg, and is scalable to higher quantities with larger bore capillary. Peak resolution in DMCR is externally controlled by selection of the release time (R(t)) at which the magnetic flux density is removed, however, longer capture times are shown to reduce the capture yield. In addition, the magnetic nanoparticle capture yields are observed to depend on the nanoparticle diameter, mobile phase viscosity and velocity, and applied magnetic flux. Using these optimized parameters, three samples of CoFe(2)O(4) nanoparticles whose diameters are different by less than 10 nm are separated with excellent resolution and capture yield, demonstrating the capability of DMCR for separation and purification of magnetic nanoparticles.     

Methylene blue-containing silica-coated magnetic particles: a potential magnetic carrier for photodynamic therapy

We present the preparation and characterization of methylene blue-containing silica-coated magnetic particles. The entrapment of methylene blue (MB), a photodynamic therapy drug under study in our group, in the silica matrix took place during the growth of a silica layer over a magnetic core composed of magnetite nanoparticles. The resulting material was characterized by transmission electron microscopy (TEM), light scattering, and X-ray diffraction. It is composed of approximately 30 nm silica spheres containing magnetic particles of 11 +/- 2 nm and methylene blue entrapped in the silica matrix. The immobilized drug can generate singlet oxygen, which was detected by its characteristic phosphorescence decay curve in the near-infrared and by a chemical method using 1,3-diphenylisobenzofuran to trap singlet oxygen. The lifetime of singlet oxygen was determined to be 52 micros (in acetonitrile) and 3 micros (in water), with both values being in good agreement with those in the literature. The release of singlet oxygen (etaDelta) was affected by the encapsulation of MB in the silica matrix, which caused a reduction to 6% of the quantum yield of MB free in solution. The magnetization curve confirmed the superparamagnetic behavior with a reduced saturation magnetization in respect to uncoated magnetic nanoparticles, which is consistent with the presence of a diamagnetic component over the magnetite surface. The result is a single particle platform that combines therapy (photosensitizer) and diagnostic (MRI contrast agent) possibilities at the same time, as well as drug targeting.     

Silica supported Fe3O4 magnetic nanoparticles for magnetic solid-phase extraction and magnetic in-tube solid-phase microextraction: application to organophosphorous compounds

This work demonstrates the application of silica supported Fe₃O₄ nanoparticles as sorbent phase for magnetic solid-phase extraction (MSPE) and magnetic on-line in-tube solid-phase microextraction (Magnetic-IT-SPME) combined with capillary liquid chromatography–diode array detection (CapLC-DAD) to determine organophosphorous compounds (OPs) at trace level. In MSPE, magnetism is used as separation tool while in Magnetic-IT-SPME, the application of an external magnetic field gave rise to a significant improvement of the adsorption of OPs on the sorbent phase. Extraction efficiency, analysis time, reproducibility and sensitivity have been compared. This work showed that Magnetic-IT-SPME can be extended to OPs with successful results in terms of simplicity, speed, extraction efficiency and limit of detection. Finally, wastewater samples were analysed to determine OPs at nanograms per litre.     

Alignment of carbon nanotubes under low magnetic fields through attachment of magnetic nanoparticles

The alignment of multiwalled carbon nanotubes (MWNTs) has been accomplished through deposition of uniform layers of magnetite/maghemite nanoparticles (diameter = 6-10 nm) and use of an external magnetic field. The coating of CNTs with magnetic nanoparticles was performed by combining the polymer wrapping and layer-by-layer (LbL) assembly techniques. The particle-coated MWNTs are superparamagnetic and can be aligned at room temperature on any substrate by deposition from an aqueous solution in an external field B = 0.2 T. The volume magnetization of the particle coated MWNTs is found to be enhanced by 17% compared to the pure particles in a powder indicating that either the adsorption process onto the CNTs changes the particle magnetization, or the MWNTs carry an intrinsic magnetization due to remaining Ni used as a catalyst for the growth process.     

The assembly state between magnetic nanosensors and their targets orchestrates their magnetic relaxation response

The target-induced clustering of magnetic nanoparticles is typically used for the identification of clinically relevant targets and events. A decrease in the water proton transverse NMR relaxation time, or T(2), is observed upon clustering, allowing the sensitive and accurate detection of target molecules. We have discovered a new mechanistically unique nanoparticle-target interaction resulting in a T(2) increase and demonstrate herein that this increase, and its associated r(2) relaxivity decrease, are also observed upon the interaction of the nanoparticles with ligands or molecular entities. Small molecules, proteins, and a 15-bp nucleic acid sequence were chemically conjugated to polyacrylic-acid-coated iron oxide nanoparticles, and all decreased the original nanoparticle r(2) value. Further experiments established that the r(2) decrease was inversely proportional to the number of ligands bound to the nanoparticle and the molecular weight of the bound ligand. Additional experiments revealed that the T(2)-increasing mechanism was kinetically faster than the conventional clustering mechanism. Most importantly, under conditions that result in T(2) increases, as little as 5.3 fmol of Bacillus anthracis plasmid DNA (pX01 and pX02), 8 pmol of the cholera toxin B subunit (Ctb), and even a few cancer cells in blood were detected. Transition from the binding to the clustering mechanism was observed in the carbohydrate-, Ctb-, and DNA-sensing systems, simply by increasing the target concentration significantly above the nanoparticle concentration, or using Ctb in its pentameric form as opposed to its monomer. Collectively, these results demonstrate that the molecular architectures resulting from the interaction between magnetic nanosensors and their targets directly govern water proton NMR relaxation. We attribute the observed T(2) increases to the bound target molecules partially obstructing the diffusion of solvent water molecules through the superparamagnetic iron oxide nanoparticles' outer relaxation spheres. Finally, we anticipate that this novel interaction can be incorporated into new clinical and field detection applications, due to its faster kinetics relative to the conventional nanoparticle-clustering assays.     

Fluorochrome-functionalized magnetic nanoparticles for high-sensitivity monitoring of the polymerase chain reaction by magnetic resonance

Easy to find: magnetic nanoparticles bearing fluorochromes (red) that intercalate with DNA (green) form microaggregates with DNA generated by the polymerase chain reaction (PCR). These aggregates can be detected at low cycle numbers by magnetic resonance (MR).     

Nanoshell magnetic resonance imaging contrast agents

Nanocontrast agents have great potential in magnetic resonance (MR) molecular imaging applications for clinical diagnosis. We synthesized Au(3)Cu(1) (gold and copper) nanoshells that showed a promising MR contrast effect. For in vitro MR images, the large proton r1 relaxivities brightened T(1)-weighted images. As for the proton-dephasing effect in T(2), Au(3)Cu(1) lightened MR images at the low concentration of 0.125 mg mL(-1) (3.84 x 10(-7) mM), and then the signal continuously decreased as the concentration increased. For in vivo MR imaging, Au(3)Cu(1) nanocontrast agents enhanced the contrast of blood vessels and suggested their potential use in MR angiography as blood-pool agents. We propose that (1) the cooperativity originating from the form of the nanoparticles and (2) the large surface area coordinated to water from their porous hollow morphology are important for efficient relaxivity. In a cytotoxicity and animal survival assay, Au(3)Cu(1) nanocontrast agents showed a dose-dependent toxic effect: the viability rate of experimental mice reached 83% at a dose of 20 mg kg(-1) and as much as 100% at 2 mg kg(-1).     

Phenylboronic acid-functionalized cross-linked chitosan magnetic adsorbents for the magnetic solid-phase extraction of benzoylurea pesticides

In this study, a 4-formylphenylboronic acid-modified cross-linked chitosan magnetic nanoparticle (FPBA@CCHS@Fe₃O₄) was fabricated. The synthesized material was utilized as the magnetic solid-phase extraction adsorbent for the enrichment of six benzoylurea pesticides. In addition to B-N coordination, FPBA@CCHS@Fe₃O₄ interacts with benzoylureas through hydrogen bonds and π-π stacking interaction on account of rich active groups (amino and hydroxyl) and aromatic rings in structure. Compared to traditional extraction methods, less adsorbent (20 mg) and reduced extraction time (3 min) were achieved. The adsorbent also exhibited good reusability (no less than 10 times). Coupled with a high-performance liquid chromatography–diode array detector, satisfactory recoveries (89.1–103.9%) and an acceptable limit of detection (0.2–0.7 μg/L) were obtained. Under optimized conditions, the established method was successfully applied to the tea infusion samples from six major tea categories with acceptable recoveries ranging from 76.8 to 110%, indicating its application potential for the quantitative detection of pesticides in complex matrices.     

Lanthanides in magnetic resonance imaging

Magnetic Resonance Imaging is perhaps the most important and prominent technique in diagnostic clinical medicine and biomedical research. Its success and development as an imaging technique has been aided by the characteristics of contrast agents that enhance signal intensities and improve specificity. Gadolinium(iii) remains the dominant starting material for contrast agent design but other lanthanide ions (and other oxidation states i.e. +2) are also being increasingly investigated as alternatives to gadolinium(III) within laboratory conditions. This critical review provides a concise summary of the MRI-active gadolinium(III) complexes to date--their pros and cons, an outline of contrast agents based on other lanthanide ions (e.g. europium, dysprosium), and directs the reader to newer, more speculative areas of lanthanide-containing contrast agent design.