Formation and characterization of natural polysaccharide hollow nanocapsules via template layer-by-layer self-assembly

Two different natural zeolites having different phase compositions were obtained from different regions of Turkey and modified by ion-exchange (0.5M NH(4)NO(3)) and acid leaching using 1M HCl. The natural and modified samples were treated at low temperature (LT), high temperature (HT) and steam (ST) conditions and characterised by XRF, XRD, BET, FTIR, DR-UV-Vis, NH(3)-TPD and TGA. Ion-exchange with NH(4)(+) of natural zeolites results in the exchange of the Na(+) and Ca(2+) cations and the partial exchange of the Fe(3+) and Mg(2+) cations. However, steam and acidic treatments cause significant dealumination and decationisation, as well as loss of crystalline, sintering of phases and the formation of amorphous material. The presence of mordenite and quartz phases in the natural zeolites increases the stability towards acid treatment, whereas the structure of clinoptilolite-rich zeolites is mostly maintained after high temperature and steam treatments. The natural and modified zeolites treated at high temperature and in steam were found to be less stable compared with synthetic zeolites, resulting in a loss of crystallinity, a decrease in the surface area and pore volume, a decrease in the surface acidity as well as dealumination, and decationisation.     

Platinum species in the pores of NaX, NaY and NaA zeolites studied using EPR, XAS and FTIR spectroscopies

The results of X-band EPR, X-ray absorption and Fourier transform infrared spectroscopy on Pt(NH(3))(4)(2+) exchanged NaX, NaY and NaA zeolites reveal after oxygen calcination at 573 K that diamagnetic Pt(2+) is not the only product. Calcination provides Pt(3+) cations, but depending on the heating rate, the decomposition of amino groups during calcination also produces hydrogen that reduces Pt(3+) to Pt(2+) and Pt(+). NaX (Si/Al = 1.23) has a more negative framework charge than NaY (Si/Al = 2.31), so Pt(3+) can be stabilized only in NaX, whereas lower oxidation states of Pt such as Pt(+) can be stabilized in both, NaX and NaY, and neither of the paramagnetic Pt cations are stabilized in NaUSY (Si/Al = 3). The autoreduction process allows controlling the number of Pt(3+) and Pt(+) in the NaX zeolite by changing the calcination heating rate: a heating rate of 1.25 K min(-1) gives only Pt(+), but 0.5 K min(-1) gives a Pt(3+)/Pt(+) ratio close to 1. The structure of the support is also important for the synthesis of Pt species. While isolated paramagnetic Pt ions were stabilized in faujasite zeolites (NaX and NaY), a paramagnetic Pt dimer was obtained in a Linde type A zeolite (LTA, Si/Al = 1) by applying the same preparation methods. The fraction of paramagnetic Pt species which were characterized by X-band EPR spectroscopy amounts to 2-18% of the total Pt in the zeolites, the remaining Pt must be diamagnetic.     

CO2 adsorption in mono-, di- and trivalent cation-exchanged metal-organic frameworks: a molecular simulation study

A molecular simulation study is reported for CO(2) adsorption in rho zeolite-like metal-organic framework (rho-ZMOF) exchanged with a series of cations (Na(+), K(+), Rb(+), Cs(+), Mg(2+), Ca(2+), and Al(3+)). The isosteric heat and Henry's constant at infinite dilution increase monotonically with increasing charge-to-diameter ratio of cation (Cs(+) < Rb(+) < K(+) < Na(+) < Ca(2+) < Mg(2+) < Al(3+)). At low pressures, cations act as preferential adsorption sites for CO(2) and the capacity follows the charge-to-diameter ratio. However, the free volume of framework becomes predominant with increasing pressure and Mg-rho-ZMOF appears to possess the highest saturation capacity. The equilibrium locations of cations are observed to shift slightly upon CO(2) adsorption. Furthermore, the adsorption selectivity of CO(2)/H(2) mixture increases as Cs(+) < Rb(+) < K(+) < Na(+) < Ca(2+) < Mg(2+) ≈ Al(3+). At ambient conditions, the selectivity is in the range of 800-3000 and significantly higher than in other nanoporous materials. In the presence of 0.1% H(2)O, the selectivity decreases drastically because of the competitive adsorption between H(2)O and CO(2), and shows a similar value in all of the cation-exchanged rho-ZMOFs. This simulation study provides microscopic insight into the important role of cations in governing gas adsorption and separation, and suggests that the performance of ionic rho-ZMOF can be tailored by cations.     

Use of the IR spectra of adsorbed ethane and propane molecules to characterize the strength of active sites in zeolites and to analyze the activation of C-H bonds in these paraffins

The adsorption and activation of ethane and propane on the hydrogen and cationic forms of mordenite, zeolite ZSM-5, and zeolite Y were studied by diffuse-reflectance IR spectroscopy. The effect of the polarization of these molecules by adsorption sites on the intensities and shifts of absorption bands due to C-H stretching vibrations were studied. It was found that weak adsorption species were formed on the hydrogen forms of the above zeolites. In this case, both the intensity distributions and the positions of absorption bands due to C-H stretching vibrations were almost independent of the nature of zeolites. However, both absorption band maximum positions and relative intensity distributions changed upon paraffin adsorption on the cationic forms. It was also found that relative intensity distributions and shifts of absorption bands due to C-H stretching vibrations strongly depended on the nature of cations and zeolites. In this case, the initially totally symmetrical C-H vibrations were found most strongly disturbed. The low-frequency shifts and relative intensities of absorption bands due to these vibrations for various cations and zeolites were found to increase in the following orders: H < Na < Ca < Mg < Zn and zeolite Y < Mord ≈ ZSM-5. The experimental results suggest that ethane and propane molecules can be used as molecular probes for acquiring information on the nature and properties of acidbase sites in zeolites. In this case, both the low-frequency shifts and the relative intensities of absorption bands due to C-H stretching vibrations can be used as measures to characterize the nature of cations and zeolites. However, the latter was found to be much more sensitive to the nature of active sites.     

改性Y分子筛的酸碱性能及吸附性能的研究

吡啶、吡咯、苯、甲苯、乙苯作为探针分子，在Li＋, Na＋, K＋, Cs＋改性的Y型分子筛上进行吸附，用TPD及IR方法系统地研究了不同碱金属离子改性的Y型分子筛的酸碱性能和吸附性能的变化. 结果表明，按Li、Na、K、Cs的顺序, 随着碱金属离子半径的增大, 其L酸酸强度依次减弱，L碱的强度逐渐增强.由于改性Y型分子筛所含碱金属离子的不同，其对芳烃的吸附的强弱及吸附量的大小亦不同.随着骨架外的阳离子的半径逐渐增大，碱的强度逐渐增强，与芳烃的作用愈强烈，导致TPD脱附峰温增高及芳烃和侧链上的C－H伸缩振动谱带向低波数位移愈多.由于位阻的原因，对含同一种碱金属离子的分子筛来说，随着芳烃侧链C数的增加，芳烃的吸附量逐渐减小.     

Hydrogen storage in low silica type X zeolites

Low silica type X zeolites (LSX, Si/Al = 1) fully exchanged by alkali-metal cations (Li(+), Na(+), and K(+)) were studied for their hydrogen storage capacities. Hydrogen adsorption isotherms were measured separately at 77 K and <1 atm, and at 298 K and <10 MPa. It was found that the hydrogen adsorption capacity of LSX zeolite depended strongly on the cationic radius and the density of the cations that are located on the exposed sites. The interaction energies between H(2) and the cations follow the order Li(+) > Na(+) > K(+), as predicted based on the ionic radii. Oxygen anions on zeolite framework were minor adsorption sites. Li-LSX had an H(2) capacity of 1.5 wt % at 77 K and 1 atm, and a capacity of 0.6 wt % at 298 K and 10 MPa, among the highest of known sorbents. The hydrogen capacity in LSX zeolite by bridged hydrogen spillover was also investigated. A simple and effective technique was employed to build carbon bridges between the H(2) dissociation catalyst and the zeolite to facilitate spillover of hydrogen atoms. Thus, the hydrogen storage capacity of Li-LSX zeolite was enhanced to 1.6 wt % (by a factor of 2.6) at 298 K and 10 MPa. This is by far the highest hydrogen storage capacity obtained on a zeolite material at room temperature. Furthermore, the adsorption rates were fast, and the storages were shown to be fully reversible and rechargeable. Further optimization of the bridge building technique would lead to an additional enhancement of hydrogen storage.     

金属离子交换分子筛的NO吸附性能

在固定床流动吸附装置上利用吸附一脱附法测定了各种金属离子交换分子筛上NO吸附性能．结果表明，在ZSM－5上NO的可逆吸附量（qrev）与不可逆吸附量（qiir）随交换金属离子的不同而不同．单位交换金属离子的NO可逆吸附量（qrev）与不可逆吸附量（qiir）随分子筛铝含量的减少而增加．qrev与qiir在ZSM－5分子筛上不随交换度变化，而在丝光沸石上却随交换度的变化而改变．     

不同分子筛的氮氩分离性能

采用水溶液离子交换法制备了不同离子交换的13X和4A分子筛,并在25℃下测 定了它们的静态吸附等温线和动态穿透曲线。研究发现,Ca~(2+)离子和Li~+离子 交换的13X和4A分子筛对氮的吸附性能都明显优于其相应的钠型分子筛,而它们对 氩的吸附量变化不大,说明这两种离子交换的分子筛是较好的氮氩分离吸附剂。从 动态吸附的结果来看,所研究的各种分子筛都有一个最优的吸附分离压力,在本论 文研究的压力范围内,这个最优压力在0.6MPa附近。通过穿透曲线推算出的混合气 体吸附量和纯气体吸附量的对比可以得出,对于氮氩吸附选择性较高的分子筛,氮 的存在对氩的吸附量有较大的影响。     

On two alternative mechanisms of ethane activation over ZSM-5 zeolite modified by Zn2+ and Ga1+ cations

The activation of ethane over zinc- and gallium-modified HZSM-5 dehydrogenation catalysts was studied by diffuse reflectance infrared spectroscopy. Hydrocarbon activation on HZSM-5 modified by bivalent Zn and univalent Ga cations proceeds via two distinctly different mechanisms. The stronger molecular adsorption of ethane by the acid-base pairs formed by distantly separated cationic Zn2+ and basic oxygen sites results already at room temperature in strong polarizability of adsorbed ethane and subsequent heterolytic dissociative adsorption at moderate temperatures. In contrast, molecular adsorption of ethane on Ga+ cations is weak. At high temperatures dissociative hydrocarbon adsorption takes place, resulting in the formation of ethyl and hydride fragments coordinating to the cationic gallium species. Whereas in the zinc case a Br?nsted acid proton is formed upon ethane dissociation, decomposition of the ethyl fragment on gallium results in gallium dihydride species and does not lead to Br?nsted acid protons. This difference in alkane activation has direct consequences for hydrocarbon conversions involving dehydrogenation.     

Formation of M2+(O2)(C3H8) species in alkaline-earth-exchanged Y zeolite during propane selective oxidation

The adsorption of oxygen and d2-propane (CH3CD2CH3) on a series of alkaline-earth-exchanged Y zeolite at room temperature was studied with in situ infrared spectroscopy. Surprisingly at room temperature, oxygen adsorption led to the formation of supercage M2+(O2) species. Further, at low propane coverage, propane was found to adsorb linearly on Mg2+ cations, but a ring-adsorption structure was observed for propane adsorbing on Ca2+, Sr2+, and Ba2+ cations. It is demonstrated that O2 and propane can simultaneously attach to one active center (M2+) to form a M2+(O2)(C3H8) species, which is proposed to be the precursor in thermal propane selective oxidation. Selectivity to acetone in the propane oxidation reaction decreases with increasing temperature and cation size due to the formation of 2-propanol and carboxylate ions. An extended reaction scheme for the selective oxidation of propane over alkaline earth exchanged Y zeolites is proposed.     

Molecular simulation of the adsorption of MTBE in silicalite, mordenite, and zeolite beta

The use of methyl tertiary butyl ether (MTBE) as a gasoline additive has resulted in serious environmental problems following spills and leaks, primarily due to MTBE's high solubility in water. Remediation technologies have involved air stripping, advanced oxidation, and sorption on granular activated carbons (GAC). Hydrophobic zeolites, such as silicalite, dealuminated Y, mordenite, and beta, have been of interest in recent studies for the removal of MTBE from water. Some of these materials have shown a better performance than GAC particularly in the microg/L range. We made Monte Carlo and molecular dynamics simulations of the adsorption of pure MTBE in silicalite, mordenite, and zeolite beta with different Na+ loadings at room temperature to reveal the factors affecting the adsorption process. The results show that although the three zeolites studied here have similar pore volumes, the pore structure of zeolite beta causes a significant difference on the predicted amount of MTBE adsorbed. It was found that the position of the Na+ cations has an important effect at lower pressures. Within the range of [Na+] studied, the amount of Na+ was not found to be critical on the adsorption capacity of any of the zeolites studied, except at very low pressures in silicalite and zeolite beta.     

Adsorption properties of oxidized gallium-modified zeolite ZSM-5 from diffuse-reflectance IR-spectroscopic and quantum-chemical data: II. Interaction with carbon monoxide and water

Diffuse-reflectance IR spectroscopy was used to study the adsorption and subsequent high-temperature transformations of water and carbon monoxide molecules on the oxidation-treated gallium-modified zeolite Ga/HZSM-5. The results were correlated with the corresponding quantum-chemical calculation data. Usually, it is thought that the oxo ions [Ga=O]⁺ are formed in the oxidation of Ga/HZSM-5. Based on the experimental and calculated data, the possible reactions of the gallium oxo ions with the above molecules are considered. The oxo ions were found highly reactive, and it is likely that polynuclear gallium oxide nanoclusters were formed in the oxidation of the gallium-substituted zeolite Ga/HZSM-5. The Ga⁺ ions, which appeared in the course of Ga/HZSM-5 reduction, were partially oxidized by water at 573 K; in turn, this could initiate the formation of polynuclear nanoclusters. It was found that ～25% of the Ga⁺ ions were oxidized in the interaction with water to liberate molecular hydrogen. The thermal reduction of a nitrous oxide-preoxidized Ga/HZSM-5 sample with carbon monoxide was studied, and a conclusion on dissimilar states of oxygen bound to gallium was drawn.     

Adsorptive removal of halo-olefinic impurities from 1,1,1,3,3-pentafluoropropane over ion-exchanged Y zeolites

Various metal cations exchanged Y zeolites were prepared via the exchange of NaY zeolite with aqueous solutions containing K⁺, Ca²⁺, Cu²⁺, La³⁺ and Ce³⁺ cations, respectively. The influence of the extra-framework cations nature of these ion-exchanged Y zeolites on their adsorption performance for a low content of halo-olefinic impurities, mainly including 1-chloro-3,3,3-trifluoro-1-propene (HCFC-1233zd), 1-chloro-1,3,3,3-tetrafluoro-1-propene (HFC-1224zb) and 2-chloro-1,3,3,3-tetrafluoro-1-propene (HFC-1224xe), in the 1,1,1,3,3-pentafluoropropane (HFC-245fa) product after distillation was investigated. HCFC-1233zd impurity can be substantially removed from HFC-245fa product feed via the adsorption over multivalent metal cations and Cu⁺ cation exchanged Y zeolites, which is ascribed to the formation of π-adsorption complexes between HCFC-1233zd and zeolites, rather than over alkaline metal cations exchanged Y zeolites. Among multivalent metal cations exchanged Y zeolites, CeY has the highest adsorption capacity for HCFC-1233zd and best regeneration performance, due to its lowest density of strong Brønsted and weak Lewis acid sites as well as high framework stability during the regeneration. Regardless of the cations introduced in Y zeolite used as an adsorbent, HCFC-1224zb and HCFC-1224xe impurities are not obviously removed from HFC-245fa product feed via the adsorption, maybe due to more halogen atoms linked with the double bond in them comparing with HCFC-1233zd.     

State and properties of ion-exchanged cations in zeolites: 1. IR spectra and chemical activation of adsorbed molecular hydrogen

Adsorption isotherms and of adsorbed molecular hydrogen indicate that H₂ is weakly adsorbed by alkali-metal forms of faujasites, mordenite, and high-silica zeolite ZSM-5. The alkaline-earth forms of the same zeolites adsorb hydrogen somewhat more strongly; nevertheless, the hydrogen molecules adsorbed by the barium form of mordenite are in the hindered rotation state. Molecular hydrogen is most strongly adsorbed by the zinc and cadmium forms of the high-silica zeolite. In this case, molecular hydrogen is strongly polarized and undergoes heterolytic dissociative adsorption, yielding acidic hydroxyl groups and cation-bound hydride ions.     

Adsorption properties of oxidized gallium-modified zeolite ZSM-5 from diffuse reflectance IR and quantum-chemical data: 1. Interaction with hydrogen and ethane

Diffuse reflectance IR spectroscopy was used to study adsorption and subsequent high-temperature hydrogen and ethane transformations on gallium ions in gallium-modified ZSM-5 zeolite. The results were correlated with the corresponding quantum-chemical calculations. From the experimental and calculated data, it follows that trivalent gallium oxo ions are reduced to the univalent state in a hydrogen or ethane atmosphere even at moderate temperatures. Therefore, gallium oxo ions can function as active sites only at the early stages of light-paraffin aromatization. At the later stages, the dehydrogenation of light paraffins involves univalent gallium ions through the formation of intermediate gallium and alkylgallium hydrides.     

Tetrahedral atom ordering in a zeolite framework: a key factor affecting its physicochemical properties

Three gallosilicate natrolites with closely similar chemical composition but differing in the distribution of Si and Ga over crystallographically different tetrahedral sites (T-sites) show striking differences in their cation exchange performance. The ability to exchange Na(+) by the larger alkali metal cations decreases upon increasing the size of the cation, as expected, but also with the degree of T-atom ordering. To seek an insight into this phenomenon, the crystal structures of 11 different zeolites, which show variations in degree of T-atom ordering, nature of countercation, and hydration state, have been refined using synchrotron diffraction data. While the three as-made sodium materials were characterized to have a low, medium, and high degree of ordering, respectively, their pore sizes are close to the size of the bare Na(+) cation and much smaller than that of the larger alkali cations, which are nonetheless exchanged into the materials, each one at a different level. Interestingly, large differences are also manifested when the Na(+) back-exchange is performed on the dehydrated K(+) forms, with crystallographic pore sizes too small even to allow the passage of Na(+). Although the thermodynamic data point to small differences in the enthalpy of the Na(+)/K(+) exchange in the three materials, comparison of the "static" crystallographic pore sizes and the diameter of the exchanged cations lead us to conclude that during the exchange process these zeolites undergo significant deformations that dynamically open the pores, allowing cation traffic even for Cs(+) in the case of the most disordered material. In addition to the very large topological flexibility typical of the natrolite framework, we propose as a hypothesis that there is an additional flexibility mechanism that decreases the rigidity of the natrolite chain itself and is dependent on preferential siting of Si or Ga on crystallographically different T-sites.     

Low-temperature adsorption/storage of hydrogen on FAU, MFI, and MOR zeolites with various Si/Al ratios: effect of electrostatic fields and pore structures

Several zeolites, such as faujasite, mordenite, and ZSM-5, with various aluminum contents have been used to analyze the effect of aluminum or cation concentration (strength of electrostatic field) on hydrogen adsorption at low temperature. Irrespective of the zeolite structure, the adsorption capacity, isosteric heat of adsorption (-DeltaHads), surface coverage, and micropore occupancy increase with increasing aluminum content of a zeolite. Zeolites with a higher amount of aluminum favorably adsorb hydrogen at relatively low pressures. For zeolites with similar aluminum contents, the adsorption capacity, isosteric heat of adsorption, surface coverage, and micropore occupancy are in the order of mordenite>ZSM-5>faujasite, probably due to differing pore sizes and the presence or absence of pore intersections. This work demonstrates that zeolites with strong electrostatic fields and narrow pores without intersections are beneficial for high hydrogen uptake.     

Ca2＋交换的几种分子筛的氮氩分离性能

采用水溶液离子交换法制备了Ca2＋交换的4A、13X和LSX分子筛，并在25 ℃下测定了它们的静态吸附等温线和动态穿透曲线.研究发现， Ca2＋交换的4A、13X和LSX分子筛对氮的吸附性能都明显优于其相应的钠型分子筛，而它们对氩的吸附量变化不大，说明Ca2＋交换的这三种分子筛是较好的氮氩分离吸附剂.从动态吸附的结果来看，所研究的各种分子筛都有一个最优的吸附分离压力，在本论文研究的压力范围内，这个最优压力在0.6 MPa附近.由穿透曲线可推算出混合气体的吸附量，通过氮和氩在混合气体中的吸附量和相应纯气体吸附量的对比可以得出，对于氮氩吸附选择性较高的分子筛，氮的存在对氩的吸附量有较大的影响.     

Adsorption of methanol on sodium faujasites and mordenites

Calorimetry and IR spectroscopy were used to study the adsorption of methanol on faujasites and mordenites with different Si/Al ratios. It was shown that the disturbance of the OH bonds in CH₃OH weakens and the heat of adsorption decreases as the cation content in the zeolites decreases. The protic acid sites in decationized mordenite form strong hydrogen bonds with the adsorbed molecules.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 476–479, March, 1993.