Solid-state thermal amorphization of inorganic polymers

Inorganíc polymers such as silicates, borates and phosphates can be transformed into amorphous solids by heating to an appropriate temperature. Thermal amorphization can be obtained by: 1. thermal dissociation of a crystalline compound, 2. distortion of the crystal structure of a solid during prolonged heat treatment, without change of its chemical composition. The specificity of the materials received, the crystallochemical conditions necessary for the amorphization which takes place, and the high-temperature processes of internal structure reconstitution and recrystallization in the amorphous products are considered. Dedicated to Professor Lisa Heller-Kallai on the occasion of her 65^th birthday     

Polycycloalkylene-siloxane polymers: Synthesis and thermal study

Based on dicyclopentadiene and silacyclopentene, two linear polycycloalkylene-siloxane polymer systems have been synthesized and the thermal stability of the raw polymers evaluated by differential scanning calorimetry and thermal gravimetric analysis. The DSC data in nitrogen indicate that both polymer systems have excellent thermal stability. In air, these polymers begin to oxidize at approximately 150°C, with catastrophic oxidation occurring at about 400°C.     

Synthesis and liquid-crystalline behaviour of liposaccharide based comb polymers

In order to investigate the relationship between the liquid-crystalline state and the biological properties of polymers, we synthesized and studied liquid-crystalline comb polymers with a polyacrylamide main chain and three types of lipo-saccharidic side chains. These comb polymers were synthesized in four steps: first the polymerizable group was linked to the amino end of an α,ω-aliphatic amino acid; in the second step the ω-carboxylic acid function was activated in the form of an N-hydroxysuccinimidylester; in the third step the active ester was aminolysed by the amine function of the saccharide (N-methyl-D-glucamine, 2-amino-2-deoxy-β-D-glucose or 1-amino-1-deoxy-β-D-galactose) and a polymerizable liposaccharide was obtained; finally the liposaccharides were transformed into comb polymers by free-radical polymerization. Comb polymers exhibit mesophases in concentrated aqueous, ethanol or dimethylsulphoxide solution, and their mesomorphic character remains after the slow evaporation of the solvent. X-ray diffraction studies have shown that the mesophases have smectic or nematic ordering, depending upon the nature of the saccharidic residues of the liposaccharidic side chains.     

LiTiCl3: Synthesis and thermal behaviour

LiTiCl₃ is obtained as one example within an ample solid solution, Li_24–2nTi_nCl₂₄ (?4?n?10), by synpropotionation of TiCl₃ and Ti in the presence of LiCl (2:1:3 molar ratio) in sealed tantalum tubes at 750°C. It crystallizes with the inverse spinel-type structure according to (Li_0.67)^[4](Li_0.67Ti_1.33)^[4]Cl₄ with, at 25°C, a = 1048.62(4) pm, space group Fd3m. Thermal expansion is linear with α = 4.85 × 10^?5K^?1 up to about 300°C and thereafter, when the migration of Li⁺ from tetrahedral to octahedral interstices becomes increasingly important, it exhibits a relative decrease resulting, finally, in the phase transition to a NaCl-type structure that is observed for the first time at about 575°C.     

Use of emanation thermal analysis in the study of thermal behaviour of inorganic materials

Emanation thermal analysis [1, 2] (ETA) is based on the measurement of the inert gas release from samples previously labelled. The high detection sensitivity of radioactive nuclides used for the measurement makes it possible to use very low concentrations of the inert gases (10^–14 at %) so that no influence of the inert gases on the properties of the solids can be supposed.

---

Zusammenfassung Emanations — Thermoanalyse [1, 2] (ETA) basiert auf der Messung von freigesetztem inerten Gas aus zufor markierten Proben. Die große Nachweisempfindlichkeit der bei der Messung verwendeten radioaktiven Nuklide ermöglicht die Anwendung sehr niedriger konzentrationen (10^–14 Atom%) für das inerte Gas. Somit kann angenommen werden, daß die Eigenscahften des Feststoffes durch das inerte Gas nicht beeinflußt werden.

     

Synthesis,characterization and thermal behaviour of adducts

The photoproduct of octacyanomolybdate(IV) and -tungstate(IV) with ethylenediamine and triethylenetetramine give complexes of the type K₃[Mo(O₂)(O)(OH)(C₉H₇ON)]·3C₉H₇ON I, K₂[W(O₂)(O) (C₉H₇ON)₃] II and K₃[Mo(CN)₃(OH)₄(C₉H₇ON)]·2C₉H₇ON·3H₂O III with 8-quinolinol (oxine). The IR spectra of the complex III shows the presence ofv(CN) peaks in the range 2047–2108 cm^?1 and oxine groupv(C-O) in the complex I, II and III in the range of 1100–1150 cm^?1. The lower region of IR spectra shows the M=O stretching while the higher thev(N-H) andv(OH). Thermal studies show the removal of uncoordinated water at 131?C from complex III. The decomposition of complexes I and II start from 150 and 212?C respectively. Oxine and cyano molecules were removed in stages at higher temperatures. The final product of the thermal decomposition was oxide which was of polymeric nature. The kinetic parameters viz. order of reaction ‘n’ and activation energy ‘E’ were determined by different methods.     

Synthesis, characterization and thermal properties of metaloquinolate-containing polymers

The monomer, 5-methyl(2-methacryloylethyloxy)-8-quinolinol(HEMA-CH₂-Hq), which possesses both double bond and 8-hydroxyquinoline groups, was synthesized from 2-hydroxyethyl methacrylate (HEMA) and 5-chloromethyl-8-quinolinol hydrochloride. The model polymer with 8-hydroxyquinoline ligands was obtained by free-radical copolymerization with styrene. So metaloquinolate (AlQ₃, ZnQ₂)-containing polymers are prepared by coordinating reaction with di(8-hydroxyquinoline) aluminum(AlQ₂) chelates or mono(8-hydroxyquinoline) zinc(ZnQ) chelates without cross-linking. Both polymer and polymer complexes were analyzed by FT-IR, UV-vis, DSC, TGA and photoluminescence spectroscopies. They are soluble in common solvents and easy to form films. The use of AlQ₂ and ZnQ avoided the cross-linking caused by the AlQ₃, ZnQ₂ formation between different polymer chains. High glass transition temperature, good thermal stability, and strong yellow-green fluorescence were observed for the prepared polymers. These polymers were expected to have the potential application in yellow-green OLEDs.     

Synthesis and structure of metal complexes with organic polymers or inorganic supports

Macromolecular ligands have been widely used in the past two decades with the objective of preparing structurally defined heterogeneous catalysts from soluble organometallic complexes. This activity has been largely reconsidered and focused on few specific systems. In this connection the present paper reviews recent data concerning the preparation of macromolecular metal complexes derived from transition metals which can produce active catalytic complexes for olefin polymerization and oligomerization and comparison is made about the suitability of both organic resins (crosslinked polystyrene) and inorganic materials (silica, alumina and zeolites).     

Synthesis and thermal dissociation of polymers having hemiacetal ester moieties

Polymers having hemiacetal ester moieties in the side chain were synthesized and their thermal dissociation was examined. 1‐Alkoxyethyl methacrylates (1) were synthesized from methacrylic acid with alkyl vinyl ethers and their radical copolymerizations with butyl methacrylate were carried out at 80°C for 6.5 h using AIBN as an initiator to afford the corresponding copolymers having the hemiacetal ester moieties in the side chain. The hemiacetal ester moieties in the copolymers thermally converted to carboxyl groups with elimination of the corresponding vinyl ethers. The thermal dissociation of the hemiacetal ester moieties in the side chain obeyed first‐order kinetics at 140°C, and their reactivities were in the following order: 1‐(tert‐butoxy)ethyl > 1‐isopropoxyethyl > 1‐ethoxyethyl > 1‐butoxyethyl ester. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 609–614, 1999     

Synthesis and thermal and spectroscopic properties of macrocyclic vinyl aromatic polymers

Well‐defined and narrow molecular weight distribution macrocyclic poly(2‐vinylnaphthalene) (P2VN) and poly(2‐vinyl‐9,9‐dimethylfluorene) (PDMVF) containing a single 1,4‐benzylidene or 9,10‐anthracenylidene unit have been synthesized via the potassium naphthalide initiated polymerization of the monomers followed by the end‐to‐end coupling of the resulting P2VN dianions under high‐dilution conditions with 1,4‐bis(bromomethyl)benzene or 9,10‐bis(chloromethyl)anthracene. Molecular characterization has been carried out by size exclusion chromatography, nuclear magnetic resonance, differential scanning calorimetry, ultraviolet–visible spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The thermal properties show distinct differences between the cyclic and matching linear polymers, with the macrocycles showing much higher glass‐transition and decomposition temperatures. The absorption bands are both hyperchromic and hypochromic with respect to the model aromatic compounds, and this is consistent with intensity borrowing. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5488–5503, 2004     

Synthesis, characterization, and thermal properties of new silarylene-siloxane-acetylene polymers

New silarylene-siloxane-acetylene polymers have been synthesized by coupling reactions employing 1,3-bis(p-ethynylphenyl)-1,1,3,3-tetraphenyldisiloxane (3) as the key monomer. Their thermal properties have been evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). All of the new polymers showed good thermal stability, with their temperatures at 5% weight loss (T_d5) being higher than 540 °C under nitrogen and higher than 460 °C in air. Their char yields at 1000 °C under N₂ were above 80%. Broad exothermic peaks, attributable to reaction of the acetylenic units, were observed by DSC analysis in the temperature range 270-450 °C.     

Synthesis and thermal behaviour of new poly(azomethine-ether)

A new poly(azomethine-ether) was synthesized by the reaction of bisphenol A with a thermotropic azomethine monomer, namely 4,4′-oxy-bis(4-chlorobenzylideneimino phenylene). In order to understand the influence of the molecular weight on the thermal properties, four fractions were isolated from the initial polymer. They were investigated by elemental analysis and spectroscopic methods (IR, UV, ¹H NMR) and their thermal behaviour was studied by differential scanning calorimetry, optical microscopy, thermogravimetrical analysis. An increase of the thermal transition temperatures and mesophase order with increasing molecular weight was noticed.     

Synthesis,characterization and thermal behaviour of some metal indigodisulphonates

Some indigodisulphonates of Cr(III), Cu(II), Ag(I), An(II) and Cd(II) have been prepared in aqueous medium and characterized on the basis of elemental analyses, diffuse reflectance infrared spectra and magnetic measurements.The thermal behaviours of these salts were studied by TG, DTG and DSC techniques. Cr(III), Cu(II), Zn(II) amd Cd(II) indigodisulphonates contain 12, 2, 2 and 2 molecules of crystallization water, respectively. The end-products of thermal decomposition have been verified by infrared spectroscopy and X-ray diffraction. Values of dehydration enthalpies have been calculated from the DSC curves.

---

Zusammenfassung Einige Indigodisulphonate von Cr(III), Zn(II), Ag(I), Zn(II) und Cd(II) wurden in wäßrigem Medium dargestellt und durch Elementaranalyse, diffuse Reflektions-IR-Spektren und magnetische Messungen charakterisiert. Das thermische Verhalten dieser Salze wurde mittels TG, DTG und DSC untersucht. Die Indigodisulphonate von Cu(II), Zn(II) und Cd(II) kristallisieren mit 2 Molekülen Kristallwasser, die von Cr(III) mit 12 Molekülen. Die Endprodukte der thermischen Zersetzung wurden infrarotspektroskopisch und röntgendiffraktometrisch identifiziert. Die Werte der Dehydratisierungsenthalpien wurden aus den DSC-Kurven berechnet.

---

, , . , . , . , , , , 12, 2, 2 2 ) . - . - .

     

Synthesis and thermal behaviour of salicylaldimine-based liquid crystalline symmetrical dimers

A series of symmetrical dimers consisting of salicylaldimine moieties connected by flexible alkylene central spacer via ether linkages has been synthesized. In order to validate the empirical rule suggested by Date et al. to account for the smectic behaviour of such dimers, the chain length of the terminal alkoxy chain has been kept constant (C₈) while the number of methylene units in the central spacer was varied from C₃ to C₁₁. Another aim of the present investigation was to understand structure-property relationship in these dimers in which the salicylaldimine mesogenic segment has been used for the first time in dimers. The mesomorphic behaviour of these dimers was evaluated using optical microscopy and differential scanning calorimetry and the structure of some of the mesophases has been further investigated with the help of X-ray diffraction. Our studies reveal that the dimers consisting of 3 to 8 methylene units in the flexible spacer show only smectic (smectic C and smectic A) phases. For the dimers containing 4, 6 and 8 methylene units in the central spacer, a unique filament growth pattern has been observed in the smectic A phase while cooling from the isotropic phase. The dimers containing of C₉ to C₁₁ methylene groups exhibit the nematic phase in addition to smectic modifications. This observation indicates that when the terminal chains are shorter than the spacer, the tendency to form smectic phases is not fully extinguished but is perhaps reduced.     

Synthesis and thermal behaviour of salicylaldimine-based liquid crystalline symmetrical dimers

A series of symmetrical dimers consisting of salicylaldimine moieties connected by flexible alkylene central spacer via ether linkages has been synthesized. In order to validate the empirical rule suggested by Date et al. to account for the smectic behaviour of such dimers, the chain length of the terminal alkoxy chain has been kept constant (C₈) while the number of methylene units in the central spacer was varied from C₃ to C₁₁. Another aim of the present investigation was to understand structure-property relationship in these dimers in which the salicylaldimine mesogenic segment has been used for the first time in dimers. The mesomorphic behaviour of these dimers was evaluated using optical microscopy and differential scanning calorimetry and the structure of some of the mesophases has been further investigated with the help of X-ray diffraction. Our studies reveal that the dimers consisting of 3 to 8 methylene units in the flexible spacer show only smectic (smectic C and smectic A) phases. For the dimers containing 4, 6 and 8 methylene units in the central spacer, a unique filament growth pattern has been observed in the smectic A phase while cooling from the isotropic phase. The dimers containing of C₉ to C₁₁ methylene groups exhibit the nematic phase in addition to smectic modifications. This observation indicates that when the terminal chains are shorter than the spacer, the tendency to form smectic phases is not fully extinguished but is perhaps reduced.     

The characterization of the thermal behaviour of inorganic fluorides using quasi-static thermoanalytical methods

Quasi-static thermal analysis is very useful for the characterization of the thermal behaviour of inorganic fluorides. The strong dependence of the thermal decomposition of hydroxonium fluorometallates, monofluorophosphates, and ammonium fluorometallates on the partial pressure is demonstrated. Non-reciprocal quasi-isobaric investigations are specially suitable to disclose this behaviour. The possibilities of characterization of the reaction mechanism using quasi-static thermal analytical methods as well as the use of these methods as synthetic variants for phase-pure fluorides are demonstrated by further examples. In this context the repression of the amount of hydrolysis products is discussed.

---

Zusammenfassung Quasi-statische thermoanalytische Methoden sind sehr gut für die Charakterisierung anorganischer Fluoride geeignet. Am Beispiel der termischen Zersetzung von Hydroxoniumfluorometallaten, Monofluorophosphaten und Ammoniumfluorometallaten wird der starke Einfluss von Partialdruckänderungen demonstriert. Besonders wichtig sind quasi-isobare, nicht-reziproke Verfahren für die Untersuchung dieses Verhaltens. An Beispielen wird auch die Möglichkeit der Reaktionsaufklärung mit quasi-statischen thermoanalytischen Methoden gezeigt. Die gleichen Methoden eignen sich darüber hinaus als Synthesevariante für phasenreine Fluoride. In diesem Zusammenhang werden die Möglichkeiten der Herstellung von Fluoriden mit geringem Hydrolysegrad ausführlich diskutiert.