Ethylene polymerization with novel bridged tri- and tetranuclear titanocene/MAO systems

Two benzene centered tri- and tetracyclopentadienyl ligands C₆H₃(CH₂C₅H₅)₃-1,3,5 (1) and C₆H₂(CH₂C₅H₅)₄-1,2,4,5 (2) and their titanium complexes C₆H₃[CH₂C₅H₄Ti(C₅H₅)Cl₂]₃-1,3,5 (3), C₆H₃[CH₂C₅H₄Ti(C₅H₄CH₃)Cl₂]₃-1,3,5 (4), as well as C₆H₂[CH₂C₅H₄Ti(C₅H₅)Cl₂]₄-1,2,4,5 (5) were synthesized and characterized by mass and ¹H NMR spectra. In the presence of methylaluminoxane (MAO), 3, 4 and 5 are efficient catalysts for ethylene polymerization in toluene. The influence of the polymerization conditions such as catalyst concentration, MAO/Ti molar ratio, polymerization time and temperature were investigated in detail. 3, 4 and 5 produce linear polyethylene (PE) with broad molecular weight distributions (MWD) and a little lower molecular weight.     

Synthesis and characterization of glycol-modified vanadium(V) oxoisopropoxide and their oximato derivatives: sol–gel transformations of [VO(OPr i )3], [VO{OCH2CH2OCH2CH2O}{OPr i }] and [VO{OCH2CH2OCH2CH2O}{ON=C(CH3)(C4H3S-2)}] to vanadia

Reaction of [VO(OPr ⁱ )₃] (1) with [O(CH₂CH₂OH)₂] in 1:1 molar ratio in anhydrous benzene yield glycol-modified precursor, [VO{OCH₂CH₂OCH₂CH₂O}{OPr ⁱ }] (2). Further reactions of (2) with internally functionalized oximes in anhydrous benzene yield heteroleptic complexes of the type [VO{OCH₂CH₂OCH₂CH₂O}{ON=C(R)(Ar)}] (3–8) {where R=CH₃, Ar=C₄H₃O-2 (3), C₄H₃S-2 (4), C₅H₄N-2 (5); and when R=H, Ar=C₄H₃O-2 (6), C₄H₃S-2 (7), C₅H₄N-2 (8)}. All these derivatives have been characterized by elemental analyses, molecular weight measurements and spectroscopic techniques. The crysoscopic molecular weight measurement as well as FAB mass study suggests dimeric nature of (2). However, FAB mass spectrum of (4), and the crysoscopic molecular weight measurements of (3), (4), (5) and (6) indicate the monomeric behavior of the oximato derivatives (3–8). Hexa-coordination around vanadium(V) has been proposed for both monomeric and dimeric derivatives. Sol–gel transformations of (1), (2) or (4) to vanadia [(a), (b) or (c), respectively] have been carried out at low sintering temperature (600 °C). The XRD patterns of (a), (b) or (c) indicate formation of a single orthorhombic phase in all the three cases. The SEM images suggest grain like [for (a) and (b)] and rod like [for (c)] morphology of the crystallites. IR, Raman spectra as well as EDX analyses indicate formation of pure vanadia. Absorption spectra of the vanadia (b) and (c) suggest energy band gaps of 2.53 and 2.65 eV, respectively.     

Reactions of bis(tetrazole)phenylenes. Surprising formation of vinyl compounds from alkyl halides

The reactions of 1,2-bis(tetrazol-5-yl)benzene (1), 1,3-bis(tetrazol-5-yl)benzene (2), 1,4-bis(tetrazol-5-yl)benzene (3), 1,2-(Bu₃SnN₄C)₂C₆H₄ (4), 1,3-(Bu₃SnN₄C)₂C₆H₄ (5) and 1,4-(Bu₃SnN₄C)₂C₆H₄ (6) with 1,2-dibromoethane were carried out by two different methods in order to synthesise pendant alkyl halide derivatives of the parent bis-tetrazoles. This lead to the formation of several alkyl halide derivatives, substituted at either N1 or N2 on the tetrazole ring, as well as the surprising formation of several vinyl derivatives. The crystal structures of both 1,2-[(2-vinyl)tetrazol-5-yl)]benzene (1-N,2-N′) (1b) and 1,3-bis[(2-bromoethyl)tetrazol-5-yl]benzene (2-N,2-N′) (5d) are discussed.     

Synthesis, characterization and crystal structures of a new 2-ferrocenylnaphthoxazole and its mercurated derivatives

A new ferrocenylnaphthoxazole [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)C(O)N(C₁₀H₆)}] (1) was synthesized under mild conditions. Two mercurated derivatives: ortho-mercurated product [HgCl{(η⁵-C₅H₅)Fe[(η⁵-C₅H₃)C(O)N(C₁₀H₆)]}] (2) and the product mercurated on the unsubstituted Cp ring [HgCl{(η⁵-C₅H₄)Fe[(η⁵-C₅H₄)C(O)N(C₁₀H₆)]}] (3) were obtained by the reaction of 1 with mercuric acetate. All the new compounds 1, 2 and 3 were characterized by elemental analyses, IR, NMR, MS spectra and X-ray crystal structure analysis. The crystal structure of 1 extended into a 2D supramolecular network through the intermolecular π-π stacking interaction between the Cp ring and naphthoxazole ring. In the crystal of 2, there exist bridged Cl-Hg bonds, CH(Cp) ? Cl and CH? Hg hydrogen bonds, π-π stacking interactions, which facilitate construction of this complex into a 3D supramolecular structure.     

One-pot microwave-assisted solvent-free synthesis,theoretical and experimental studies on barrier rotation of C–N bond of N-alkenyl-1,2,3-triazoles

The reactions on benzotriazoles continue to happen to reach interesting varieties of their derivatives. This study reports a fast one-pot microwave-assisted solvent-free synthesis of N-alkenyl-1,2,3-benzotriazole (3, 5, and 7) and 1-(2-Alkyloxycarbonyl-vinyl)-1H-[1–3] triazole-4-carboxylic acid methyl ester (8 and 9) derivatives by nucleophilic addition reactions of 1,2,3-benzotriazole (C₆H₅N₃) (1) and 1H-[1–3] triazole-4-carboxylic acid methyl ester (C₄H₄N₃O₂) (1′) with R-propiolates (R = Me, Et; 2 & 4) and phenylacetylene 6 in good yields. The values of activation energy for rotation around C–N bond in the synthesized N-alkenyl-1,2,3-triazole compounds were studied by DFT-B3LYP/6-31G* method.     

New aromatic pentafluoro-λ-sulfanyl (SF5) derivatives, m-SF5(CF2)2C6H4X: (X = N3, Br, OC(O)CHCH2, CHCH2)

Preparation of the following new m-SF₅CF₂CF₂C₆H₄X derivatives has been achieved: X=N₃(2), Br(3), OC(O)CHCH₂(4), CHCH₂(5). The compounds were characterized by their respective IR, NMR, mass spectra (MS) and high resolution mass spectrometry (HRMS). An improved yield of SF₅(CF₂)₂C₆H₅ (1) is also reported along with the synthesis of the polyacrylate (6) and polystyrene (7) from their respective monomers.     

Synthesis and characterization of some bis(cyclopentadienyl)titanium(IV) complexes with internally functionalized oximes(LH): sol–gel transformations of Cp2TiCl2, Cp2TiClL and Cp2TiL2 to nano‐sized anatase titania

Some bis(cyclopentadienyl)titanium(IV) complexes of the type [Cp₂TiCl_2?n{L}_n] {where, n = 1 or 2; L = ONC(R)Ar; R = H or CH₃ and Ar = C₅H₄N‐2, C₄H₃O‐2 or C₄H₃S‐2} have been synthesized by the metathetical reactions of Cp₂TiCl₂ with the sodium salt of internally functionalized oximes in 1:1 and 1:2 stoichiometry in anhydrous THF. All these red to brown colored solid derivatives have been characterized by elemental analyses, FT‐IR and NMR (¹H and ¹³C{¹H}) spectral studies. The FAB mass spectra of some representative derivatives indicate their monomeric nature. Oximato ligands in all the complexes appear to bind the titanium via N and O in a dihapto ( ‐N, O) manner in the solid state. Thermogravimetric curves of [Cp₂TiCl{ONC(CH₃)C₅H₄N‐2}] and [Cp₂Ti{ONC(CH₃)C₅H₄N‐2}₂] suggest the formation of hybrid materials CpTiO(Cl) and Cp₂TiO, respectively, as the final products at 900 °C under nitrogen atmosphere. Sol–gel transformations of Cp₂TiCl₂, [Cp₂TiCl{ONC(CH₃)C₅H₄N‐2}] and [Cp₂Ti{ONC(CH₃)C₅H₄N‐2}₂] yielded titania a–c, respectively, at low sintering temperature (600 °C). The powder XRD patterns, IR as well as Raman spectra of all these oxides indicate the formation of nano‐sized anatase phase. The SEM images of titania a–c indicate agglomers like surface morphologies. The absorption spectra of a–c exhibit an energy band gap in the range of 3.47–3.71 eV. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of novel tri-podal mesogenic alkenes and side-chain polysiloxanes

Low molecular weight tri-podal biphenyl- and benzoate-type mesogens [C₆H₅C₆H₄O(CH₂)₅SiMe₂CH₂CH₂SiMe₂]₃CH (4), [C₁₁H₂₃O(C₆H₄)₂O(CH₂)₅SiMe₂]₃CH (5) and [MeOC₆H₄OC(O)C₆H₄O(CH₂)₅SiMe₂]₃CH (6) (C₆H₄ = 1,4-phenylene) were obtained, from branched silyl substituted methane precursors [CH₂CH(Me)₂Si]₃CH (1) and (HMe₂Si)₃CH (2). The biphenyl-containing ones (4) and (5) were converted into terminal alkenes, which were subsequently hydrosilylated with poly(methylsiloxanes). The polymer derived from (5) exhibited mesomorphic properties. Such systems have the potential to significantly increase the density of liquid crystal rod-like structures in side chains of linear polymers (or dendritic liquid crystal polymers).     

Photolysis of diruthenium hexacarbonyl tetrahedrane compounds in Nujol glass matrices

The photochemistry of five diruthenium hexacarbonyl tetrahedrane compounds, Ru₂(CO)₆(μ-S₂C₆H₄) (1), Ru₂(CO)₆(μ-S₂C₂H₄) (2), Ru₂(CO)₆(μ-S₂C₃H₆) (3), Ru₂(CO)₆(μ-SCH₂CH₃)₂ (4), and Ru₂(CO)₆(μ-dmpz)₂, (5), where dmpz=3,5-dimethylpyrazolate, have been examined in frozen Nujol glasses at ca. 90 K. Compounds 1-4 are found to lose CO upon UV photolysis to form two isomeric photoproducts, while 5 is found to form one product almost exclusively. The various photoproducts are assigned to axial and equatorial CO-loss species on the basis of the spectra of analogous triphenylphosphine pentacarbonyl derivatives.     

Synthesis of new transition metal complexes of 1H-perimidine derivatives having antimicrobial and anti-inflammatory activities

New series of 1H-perimidine-2-thiol derivatives and (2-substituted-1H-perimidin-1-yl)ethane-1,2-dione derivatives and their ligands (C₂₄H₁₄N₄S₂O₂) H₂L¹ and (C₂₆H₁₈N₄S₂O₂) H₂L² have been synthesized with transition metal ions, e.g., Copper (II), Silver (I), Cobalt (II) and Ruthenium (III) were prepared and evaluated for their antimicrobial, analgesic and anti-inflammatory activities. The synthesized compounds and their complexes were characterized by elemental analysis, ¹H NMR, IR, MS, molar conductance, thermal gravimetric analysis and electronic spectra. All results revealed that compounds 3 and 13 exhibited high inhibitory effects against some bacterial strains by the disc diffusion method. On the other hand, compounds 2, 3, 7 and 12 displayed potent anti-inflammatory activity.     

Ethylene polymerization by rigid benzene ring centered dinuclear metallocene (Ti, Zr)/MAO systems

Two rigid benzene centered dinuclear metallocene complexes C₆H₂[(CH₂C₅H₄)₂MCl₂]₂, M = Ti (1), Zr (2) have been prepared by treating two equivalents of TiCl₄ and ZrCl₄ with the tetralithium salt of the ligand C₆H₂(CH₂C₅H₅)₄-1,2,4,5 in toluene and characterized by ¹H NMR and elemental analysis. Both complexes are effective catalysts for ethylene polymerization in the presence of methylaluminoxane (MAO). The influence of [MAO]/[Cat] molar ratio, catalyst concentration, polymerization temperature and time has been tested in detail. The catalytic activity of complex 2 is more than two times higher than that of complex 1, which is still more active than that of the tetranuclear titanocene C₆H₂[CH₂C₅H₄Ti(C₅H₅)Cl₂]₄-1,2,4,5 (5). On the other hand, the catalytic activities of 1 and 2 is slightly lower than that of the dinuclear metallocene complexes C₆H₄[CH₂C₅H₄Ti(C₅H₄CH₃)Cl₂]₂-1,3 (3) and C₆H₄[CH₂C₅H₄Zr(C₅H₅)Cl₂]₂-1,3 (4), respectively, which is related to the limited intermolecular rotation of the metallocene units in 1 and 2. The melting points above 130 °C indicate a polyethylene formed by complexes 1 and 2 with highly linear and highly crystalline. GPC spectra show that polyethylene produced by complexes 1 and 2 has a broad and even bimodal molecular weight distribution (MWD).     

Triosmium compounds containing the oxametallacycle [Os(CO)3{C(R)CHC(O)CHC(H)C5H4FeC5H5}] moiety. Synthesis and electrochemical studies

The compounds [Os₃(CO)₁₀{μ,η³-(SCH₂CH₂SCCHC(O)CHCH(C₅H₄)Fe (C₅H₅)}] (2), [Os₃(CO)₉{μ,η³-(SCH₂CH₂SCCHC(O)CHCH(C₅H₄)Fe(C₅H₅)}] (3) and [Os₃(CO)₈{μ₃,η²-{CCHC(O)CHCH(C₅H₄)Fe(C₅H₅)}(SCH₂CH₂S)}] (4) have been obtained by rupture of S-C bonds in the ketene dithioacetal [C₅H₅FeC₅H₄CHCHC(O)CHC(SCH₂CH₂S)], in their reaction with the activated cluster [Os₃(CO)₁₀(NCMe)₂]. The presence of an oxametallacycle in these derivatives has been confirmed by an X-ray diffraction analysis. The electrochemical study has indicated the ability of these compounds to modify the electrode surfaces.     

Seeking new metalloligands: Synthesis and reactivity of palladacycles with pyridine and pyrimidine rings

Treatment of the Schiff base ligands 4-(NC₅H₄)C₆H₄C(H)N[2′-(OH)C₆H₄] (a), 3,5-(N₂C₄H₃)C₆H₄C(H)N[2′-(OH)-C₆H₄] (b) and 3,5-(N₂C₄H₃)C₆H₄C(H) N[2′-(OH)-5′-^tBuC₆H₃] (c) with palladium (II) acetate in toluene gave the poly-nuclear cyclometallated complexes [Pd{4-(NC₅H₄)C₆H₃C(H)N[2′-(O)C₆H₄]}]₄ (1a), [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-C₆H₄]}]₄ (1b) and [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-5′-^tBuC₆H₃]}]₄ (1c) respectively, as air stable solids, with the ligand acting as a terdentate [C,N,O] moiety after deprotonation of the –OH group. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species [Pd{4-(NC₅H₄)C₆H₃C(H) N[2′-(O)C₆H₄]}(PPh₃)], (2a), [Pd{3,5-(N₂C₄H₃)C₆H₃C(H) N[2′-(O)C₆H₄]}(PPh₃)], (2b) and [Pd{3,5-(N₂C₄H₃)C₆H₃C(H)N[2′-(O)-5′-^tBuC₆H₃)}(PPh₃)], (2c) in which the polynuclear structure has been cleaved and the coordination of the ligand has not changed [C,N,O]. When the cyclometallated complexes 1b and 1c were treated with the diphosphines Ph₂P(CH₂)₄PPh₂ (dppb), Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) and Ph₂P(CH₂)₂PPh₂ (t-dppe) in a 1:2 molar ratio the dinuclear cyclometallated complexes [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)C₆H₄}]}₂(μ-Ph₂P(CH₂)₄PPh₂)], (3b), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H) N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(CH₂)₄PPh₂)], (3c), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)C₆H₄}]}₂(μ-Ph₂P(η⁵-C₅H₄)Fe(η⁵-C₅H₄)PPh₂)], (4b), [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H) N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(η⁵C₅H₄)Fe(η⁵C₅H₄)P-Ph₂)], (4c) and [{Pd[3,5-(N₂C₄H₃)C₆H₃C(H)N{2′-(O)-5′-^tBuC₆H₃}]}₂(μ-Ph₂P(CHCH)PPh₂)], (5c) were obtained as air stable solids.     

Vibrational spectroscopic study of the structure of Ti(III) organometallic compounds

Conclusions A full interpretation was carried out for the vibrational spectra of TiR₃, where R= -CH₂C₆H₅, -CH₂C(CH₃)₂C₆H₅, and-CH₂Si(CH₃)₃. The absorption bands for the Ti-C bonds were delineated. A dimeric structure was established for the compounds studied with a Ti-Ti bond, whose band lies at 230–280 cm^–1. There is an interaction of the titanium atom with the -carbon atom of the ligand for the Ti(III) benzyl and neophyl derivatives.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2736–2739, December, 1987.     

Rhodium (II) compounds with functionalized metalated phosphines as bridging ligands

The reaction of Rh₂(O₂CCH₃)₄ · 2CH₃OH with the phosphine P(4-BrC₆H₄)₂(C₆H₅), 2, results in the formation of the monometalated compound Rh₂(O₂CCH₃)₃[PC] · 2CH₃CO₂H (PC representing a metalated P(4-BrC₆H₄)₂(C₆H₅)). The reaction involves selective metalation of the phosphine at one Br-substituted ring (12:1 isomer ratio). The reaction of Rh₂(O₂CCH₃)₃[(4-BrC₆H₃)P(4-BrC₆H₄)(C₆H₅)] · 2CH₃CO₂H, 4, with one additional mol of triphenylphosphine yields a mixture of two main stereoisomers Rh₂(O₂CCH₃)₂[(4-BrC₆H₃)P(4-BrC₆H₄)(C₆H₅)] [(C₆H₄)P(C₆H₅)₂] · 2CH₃CO₂H, 5a and 5b, that were isolated as pure compounds. These two compounds were resolved in the corresponding M and P enantiomers as trifluoroacetate derivatives that show good enantioselectivities in catalytic transformation of α-diazocarbonyl compounds.     

Über die Reaktion von Schwefel mit Aminen und Formaldehyd. Eine neue Methode zur Herstellung von Thioformamiden und Dithiocarbamaten

The reaction of sulfur with primary or secondary amines and formaldehyde has been studied. A simple one step process for the preparation of thioformamides (RR′NCHS; R ? H, R′ ? CH₃, C₂H₅; R ? R′ ? CH₃, C₂H₅; R+R′ ? ? (CH₂), ? (CH₂), ? C₂H₄OC₂H) and the amine salts of N, N-dialkyl-dithiocarbamic acids (R₂NCS₂ · H₂NR₂, R ? CH₃, C₂H₅, C₄H₉; R₂ ? ? (CH₂), ? (CH₂), ? C₂H₄OC₂H) is reported. In addition, the isolation of diethylamidosulfoxylic acid, (C₂H₅)₂NSOH · 1/2 H₂O, the first derivative of a new class of compounds, is described. The physical properties and the ¹H-NMR. spectra of the above mentioned compounds are given.     

Synthesis, reactivity and crystal structures of platinum (II) and platinum (IV) cyclometallated compounds derived from 2- and 4-biphenylimines

The reaction of [Pt₂Me₄(μ-SMe₂)₂] with ligands 4-C₆H₅C₆H₄CHNCH₂CH₂NMe₂ (1a) and 2-C₆H₅C₆H₄CHNCH₂CH₂NMe₂ (1b) carried out in acetone at room temperature produced compounds [PtMe₂{4-C₆H₅C₆H₄CHNCH₂CH₂NMe₂}] (2a) and [PtMe₂{2-C₆H₅C₆H₄CHNCH₂CH₂NMe₂}] (2b), respectively, in which the imines act as bidentate [N,N′] ligands. Cyclometallated [C,N,N′] compounds [PtMe{4-C₆H₅C₆H₃CHNCH₂CH₂NMe₂}] (3a) and [PtMe{2-C₆H₅C₆H₃CHNCH₂CH₂NMe₂}] (3b), were obtained by refluxing toluene solutions of compounds 2a or 2b. Reaction of [Pt₂Me₄(μ-SMe₂)₂] with ligands 4-C₆H₅C₆H₄CHNCH₂Ph (1c) and 2-C₆H₅C₆H₄CHNCH₂Ph (1d) produced compounds [PtMe{4-C₆H₅C₆H₃CHNCH₂Ph}SMe₂] (5c) and [PtMe{2-C₆H₅C₆H₃CHNCH₂Ph}SMe₂] (5d) containing a [C,N] ligand, from which triphenylphosphine derivatives 6c and 6d were also prepared. In all cases, metallation took place to yield five-membered endo-metallacycles and formation of seven-membered or of exo-metallacycles was not observed. The reactions of 3a, 3b, 6c and 6d with methyl iodide were studied in acetone and gave the corresponding cyclometallated platinum (IV) compounds. All compounds were characterised by NMR spectroscopy and compounds 3b, 4a, 6c and 6d were also characterised crystallographically.     

Synthesis and X-ray structure study on new Au(I) polymer architectures based on multi-sulfur tentacles

Multi-thiolate ligands are used as a scaffold to construct a series of supramolecules, which cover the following entries; [(1,3-S₂-C₆H₄){AuP(C₆H₄-3-CF₃)₃}₂]_n (1), [(1,4-S₂-C₆H₄){AuP(C₆H₄-3-CF₃)₃}₂]_n (2), (1,4-S₂-C₆H₄){AuP(C₆H₅)₂(2-pyridine)}₂ (3), [(1,3,5-S₃-C₆H₃){AuP(C₆H₅)₂(2-pyridine)}₃]_n (4), and [(1,3,5-S₃-C₆H₃){AuP(C₆H₄-3-CF₃)₃}₃]_n (5). The molecular and crystal structures of these new derivatives have been elucidated by single crystal X-ray diffraction. Aurophilic interactions have been demonstrated for 1, 2, 4, and 5 to produce new supramolecular architectures. Nano-channels are formed by aurophilic and π-π interactions for 1, in which benzene molecules are trapped. An 8 (eight)-shaped loop is formed in solid state for 2. Infinite zigzag chains are constructed for 4 and 5.     

Reactions of benzopinacol with group 13 alkyl metals:: Crystal structure of Me6In4[OC(C6H5)2C(C6H5)2O]2(OCH3)2, a new alkylalkoxo indium diolate

Reactions of Me₅Al₃[OC(C₆H₅)₂C(C₆H₅)₂O]₂ (1) with alcohols ROH (R = Me, Et, ^tBu) in a 1:1 molar ratio afforded the compound Me₂Al₂[OC(C₆H₅)₂C(C₆H₅)₂O]₂(C₄H₈O) (2) and a mixture of methylaluminum alkoxides. The alcohols acted as the factor formally eliminating a molecule of Me₃Al (as a methylaluminum alkoxide) from compound 1. ^tBu₃Al reacted with an equimolar amount of benzopinacol to form the monomeric complex ^tBuAl[OC(C₆H₅)₂C(C₆H₅)₂O](C₄H₈O) (3). Reactions of Me₃Ga and Me₃In with benzopinacol yielded trinuclear complexes Me₅M₃[OC(C₆H₅)₂C(C₆H₅)₂O]₂ (4 (M = Ga), 5 (M = In)), isostructural to compound 1. In the presence of water and alcohols, compounds 4 and 5 underwent a decomposition reaction to benzopinacol and a mixture of metalloxanes and alkoxides. An unusual methylmethoxo indium benzopinacolate Me₆In₄[OC(C₆H₅)₂C(C₆H₅)₂O]₂(OCH₃)₂ (6) was obtained in the reaction of benzopinacol with Me₃In and Me₂InOMe in a 1:1:1 molar ratio. Molecular structures of the compounds 3, 4 and 6 were determined by X-ray crystallography.