Gas Cotton-Mouton constant measurement by extrapolation in dissolved binary liquid solutions

The magneto-optic Cotton-Mouton effect constant C, light refraction index n and density ρ of binary solutions of toluene in carbon tetrachloride, -picoline and β-picoline in 1,4-dioxane have been measured at different concentrations. The results have been used for the calculation of the molar C^M constants of the solutions. By extrapolating the values C^M = C^M(f₂) for the concentration f₂ → 0, the constant _∞C₂^M = _gasC₂^M of the dipolar component of the solution has been found, which is interpreted as the Cotton-Mouton gas constant. For all solutions, the reduction factors of the dissolved component have been calculated and their linear dependence on the solution concentration has been found.     

Oxygen permeability of La2Cu(Co)O4+δ solid solutions

Formation of the La₂Cu_1−xCo_xO_4+δ solid solutions with orthorhombic K₂NiF₄-type structure was found to be in the range of 0≤x≤0.30 at temperatures above 1270 K. Incorporating cobalt into the copper sublattice of lanthanum cuprate leads to increasing oxygen hyperstoichiometry and decreasing electrical conductivity. Thermal expansion coefficients of the La₂Cu_1−xCo_xO_4+δ (x=0.02–0.30) ceramics at 470–1100 K were calculated from the dilatometric data to vary in the range (12.2–13.2)×10⁻⁶ K⁻¹. Studying the dependence of oxygen permeation fluxes through La₂Cu(Co)O_4+δ on the membrane thickness demonstrated that the oxygen transport at the thickness values below 1 mm is limited by both surface exchange rate and bulk ionic conductivity. Oxygen permeability of the La₂Cu_1−xCo_xO_4+δ solid solutions was ascertained to increase with cobalt concentration at x=0.02–0.10 and to decrease with further dopant additions, indicating a participation of interstitial oxygen in the ionic transport.     

Ion-pair and triple-ion studies of some tetraalkylammonium halides in pure 1,3-dioxolane at 298.15 K

Conductivities of some tetraalkylammonium halides, viz. tetramethylammonium iodide (Me₄NI), tetraethylammonium bromide (Et₄NBr), tetraethylammonium iodide (Et₄NI), tetra-n-propylammonium bromide (Pr₄NBr), tetra-n-butylammonium bromide (Bu₄NBr), tetra-n-butylammonium iodide (Bu₄NI) and tetra-n-heptylammonium bromide (Hp₄NBr) were measured at 298.15 K in 1,3-dioxolane which has a low permittivity (ε = 7.13). A minima in the conductometric curves (molar conductance, Λ vs. square root of concentration, √c) was observed for concentrations which were dependant upon both the salt and the solvent. The observed molar conductivities were explained by the formation of ion-pairs (M⁺ + X⁻ ↔ MX, K_P) and triple-ions (2M⁺ + X⁻ ↔ M₂X⁺; M⁺ + 2X⁻ ↔ MX₂⁻, K_T). A linear relationship between the triple-ion formation constants [log (K_T/K_P)] and the salt concentrations at the minimum conductivity (log C_min) was given for all the salts in 1,3-dioxolane. The formation of triple-ions might be attributed to the ion sizes in solutions in which Coulombic interactions and non-Coulombic interactions act as the main forces between the ions (R₄N⁺…..X⁻).     

The effect of oxygen vacancy on the oxide ion mobility in LaAlO3-based oxides

The electrical property of (La_1−xSr_x)_1−z(Al_1−yMg_y)O_3−δ (LSAM; x≤0.3, y≤0.15 and z≤0.1) was measured using the DC four-probe method as a function of temperature (500–1000°C) and oxygen partial pressure (1–10⁻²² atm). Among LSAMs, (La_0.9Sr_0.1)AlO_3−δ showed the highest ionic conductivity, σ_i=1.3×10⁻² S cm⁻¹ at 900°C. A simultaneous substitution at A and B sites or A site deficiency is expected to create larger oxygen vacancy and higher ionic conductivity. However, it showed a negative effect. The effect of the vacancy increase did not effect monotonously the ionic conductivity. It was found that the concentration of oxygen vacancy, [V_O], influences not only the oxide ion conductivity, σ_i, but also the mobility, μ_v, of [V_O]. These properties exhibit a maximum at around [V_O]=0.05. With the increase in [V_O], the activation energy, E_a, of the ionic conduction dropped from 1.8 to ca. 1.0 eV at [V_O]=0.05 and became almost constant at [V_O]>0.05. The dependency of the pre-exponential term, μ⁰_v, and E_a on [V_O] was analyzed and their effect on μ_v and σ_i was discussed with respect to crystal structure and defect association. It was estimated that the crystal structure mainly governs these properties. The effect of defect association could not be ignored but is considered to be a complicated correlation.     

Magnetic phase transition in (Fe,Mn)65Ni35 alloys

Magnetization measurements on the Fe₆₀Mn₅Ni₃₅ and Fe₅₀Mn₁₅Ni₃₅ alloy samples were carried out in the temperature range 80T300 K and in magnetic fields up to 8 kOe. The Fe₆₀Mn₅Ni₃₅ was found to order ferromagnetically with a Curie temperature, T_c, above 300 K. From the temperature dependence of the spontaneous magnetization, M_s, it was concluded that the magnetic behavior of Fe₆₀Mn₅Ni₃₅ follows Wohlfarth theory of weak itinerant ferromagnet. The Fe₅₀Mn₁₅Ni₃₅ sample exhibits a magnetic phase transition from ferromagnetism to paramagnetism at T_c=242 K. The critical amplitudes and critical exponents (β, γ and δ) have been determined by using Arrott plots, Kouvel–Fisher method and scaling plots of the reduced magnetization and reduced magnetic field. The values of β, γ and δ are discussed and compared with the results obtained for various theoretical models and also with the experimentally determined values for related systems obtained by others.     

Phonon Raman scattering in Nd1+xBa2−xCu3O7−δ and Pr1+xBa2−xCu3O7−δ single crystals

The polarized Raman spectra of Nd_1+xBa_2−xCu₃O_7−δ (−0.023≤x≤0.107) and Pr_1+xBa_2−xCu₃O_7−δ (0.01≤x≤0.15) single crystals have been investigated. It was found that the Cu(2) A_g mode softens by 6 cm⁻¹ in Nd 1:2:3 and 4 cm⁻¹ in Pr 1:2:3 as x increases. These frequency shifts cannot be explained by the change in the relevant bond lengths due to Nd(Pr)-substitution for Ba. The variations with x of the two low frequency modes may be affected by change of their hybridization and/or change of their force constants. The linewidths of Ba mode in Pr 1:2:3 are broader than those in Y 1:2:3. This result suggests that the Pr substitution on Ba sites occurred even in a very small value of x. In x(yy) geometry the relative intensity of the Ba and O(4) modes in Nd 1:2:3 is greater than those in Pr 1:2:3. The difference between Nd 1:2:3 and Pr 1:2:3 in the relative intensity of the Ba and O(4) modes may be produced by the chains.     

Precision flavour physics and supersymmetry

We review the salient features of a comparative study of the profile of the CKM unitarity triangle, and the resulting CP-violating phases , β and γ in B decays, in the standard model and in several variants of the minimal supersymmetric standard model (MSSM), reported recently by us. These theories are characterized by a single phase in the quark flavour mixing matrix and give rise to well-defined contributions in the flavour-changing-neutral-current transitions in K and B decays. We analyse the supersymmetric contributions to the mass differences in the B_d⁰– and B_s⁰– systems, ΔM_d and ΔM_s, respectively, and to the CP-violating quantity || in K decays. Our analysis shows that the predicted ranges of β in the standard model and in MSSM models are very similar. However, precise measurements at B-factories and hadron machines may be able to distinguish these theories in terms of the other two CP-violating phases and γ.     

Characterization of nonstoichiometric nickel manganite spinels NixMn3−x□3δ/4O4+δ by temperature programmed reduction

Cation deficient spinels Ni_xMn_3−x□_3δ/4O_4+δ (0≤x≤1) have been prepared by thermal decomposition of mixed oxalates Ni_x/3Mn_(3−x)/3(C₂O₄)·nH₂O in air at 623 K. They have been characterised by temperature programmed reduction (TPR) under H₂, the reaction being followed by gravimetric and powder X-ray diffraction measurements. It has been shown that TPR proceeds in several steps. The first steps correspond to the loss of nonstoichiometric oxygen leading to the formation of a stoichiometric oxide. During the following stages the manganese cations are reduced, causing the spinel structure to be destroyed, and the formation of solid solution of NiO in a cubic MnO. Subsequently, Ni²⁺ cations undergo a reduction to metallic nickel, and, finally, a mixture of nonstoichiometric MnO_1−δ and metallic nickel is formed. These oxides contain a high level of vacancies which vary with the nickel content with a maximum of δ≈1 near x=0.6. This nonstoichiometry is ascribed both to the presence of Ni³⁺ and excess of Mn⁴⁺.     

Magnetic properties and composition range of non-stoichiometric m-type hexagonal ferrites prepared by ion exchange

Single crystals of Ba, Sr M-type hexagonal ferrites were prepared by ion exchange in Ba, Sr containing molten salts from single crystals of β″ -ferrites. A fast diffusion of the divalent Ba²⁺, Sr²⁺ is observed leading to a non-stoichiometric M-type ferrite with chemical formula: Ba_1+xFe_10.5Co_0.25O_17+x (0 ≤ x ≤ 0.25). x depending on the exchange reaction time. Saturation magnetization ranges from 19 to 64 emu/g depending on exchange conditions. The Curie temperature is (470 ± 5)°C. An easy axis direction (M_s c) has been determined in all cases. The observed anisotropy is considerably lower than that of M ferrite. The calculated anisotropy constants are, in 10⁶ erg/cm³, K₁ = 0.8 and K₂ = 1.0 at room temperature.     

Study of superconducting state parameters of alkali–alkali binary alloys by a pseudopotential

A detailed study of the superconducting state parameters (SSP) viz. electron–phonon coupling strength λ, Coulomb pseudopotential μ^*, transition temperature T_C, isotope effect exponent and effective interaction strength N_OV of ten alkali–alkali binary alloys i.e. Li_1−xNa_x, Li_1−xK_x, Li_1−xRb_x, Li_1−xCs_x, Na_1−xK_x, Na_1−xRb_x, Na_1−xCs_x, K_1−xRb_x, K_1−xCs_x and Rb_1−xCs_x are made within the framework of the model potential formalism and employing the pseudo-alloy-atom (PAA) model for the first time. We use the Ashcroft’s empty core (EMC) model potential for evaluating the superconducting properties of alkali alloys. Five different forms of local field correction functions viz. Hartree (H), Taylor (T), Ichimaru–Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used to incorporate the exchange and correlation effects. A considerable influence of various exchange and correlation functions on λ and μ^* is found from the present study. Reasonable agreement with the theoretical values of the SSP of pure components is found (corresponding to the concentration x = 0 or 1). It is also concluded that nature of the SSP strongly depends on the value of the atomic volume Ω₀ of alkali–alkali binary alloys.     

Scalar one-loop four-point integral with one massless vertex in loop regularization

The scalar one-loop four-point function with one massless vertex is evaluated analytically by employing the loop regularization method. According to the method, a characteristic scale μ_s is introduced to regularize the divergent integrals. The infrared divergent parts, which take the form of ln~2(λ~2/μ_s~2)and ln(λ~2/μ_s~2)as μ_s→ 0 where λ is a constant and expressed in terms of masses and Mandelstam variables, and the infrared stable parts are well separated. The result is shown explicitly via 44 dilogarithms in the kinematic sector in which our evaluation is valid.     

The physical properties of aqueous solution of room-temperature ionic liquids based on imidazolium: Database and evaluation

We report the systematic studies of the physical properties of systems involving imidazolium based ionic liquids and water. The measurements of density ρ, refractive index Δ_n, viscosity η, specific conductance κ and surface tension γ were made over the whole concentration range. The equivalent conductivity Λ_m was calculated. The physical properti`es of the solutions changed with the change of association between ionic liquid and water. The physical properties of the solutions also vary with the alkyl length on the cation and polarity of anion.     

Molecular associations in binary mixtures of pyridine and chlorobenzene in benzene solution using microwave absorption data

The dielectric relaxation time (τ) of binary mixtures of different molar concentrations of pyridine (C₅H₅N) and chlorobenzene (C₆H₅Cl) in benzene solution at different temperatures (25, 30, 35 and 40 °C) has been calculated by using standard microwave techniques and Gopala Krishna's single frequency (9.875 GHz) concentration variation method. The energy parameters (ΔH_ε, ΔF_ε, and ΔS_ε) for the dielectric relaxation process of the binary mixture containing 0.5 mol fraction of pyridine have been calculated at the respective temperatures. Comparisons have been made with the corresponding energy parameters for the viscous flow (ΔH_η, ΔF_η, and ΔS_η). From the observations it is found that the dielectric relaxation process can be treated as the rate process. Based upon above studies, solute–solvent type of molecular associations arising from the interaction of chlorobenzene and benzene and pyridine and benzene molecules has been proposed. No solute–solute type of molecular association has been observed.     

Deuterium conductivity, diffusion and implantation in Sr-doped LaYO3

A study of deuterium conductivity and diffusion in the oxide perovskite La_0.9Sr_0.1YO_3−δ is presented in this work. Deuterium ions were implanted into La_0.9Sr_0.1YO_3−δ (50 keV, 1×10¹⁶ atoms/cm²) and the corresponding deuterium depth profile was determined by SIMS and compared with a Monte Carlo simulation (TRIM96). This implant was used as a standard for the determination of deuterium concentration in a La_0.9Sr_0.1YO_3−δ sample pre-treated in D₂O atmosphere. In this way, it was fully confirmed that La_0.9Sr_0.1YO_3−δ incorporates water at high temperatures. The conductivity of La_0.9Sr_0.1YO_3−δ was measured in D₂O atmosphere and compared with other proton (deuteron) conductors. Concentration and conductivity data were used in conjunction to estimate the deuterium diffusivity and the constant of reaction of (heavy) water incorporation into LaYO₃. Some comments on the catalytic activity of this oxide are made.     

Chemical diffusivity of BaTiO3−δ: I. Experimental determination

The chemical diffusivity of ‘undoped' polycrystalline BaTiO_3−δ was determined via a conductivity relaxation technique, at elevated temperatures (800≤T/°C≤1100) as a function of the ambient oxygen partial pressure in the range of 10⁻¹⁶≤P_O2/atm≤1 including an n- to p-type transition regime. Mathematical formulation was developed to convert conductivity relaxation to the corresponding nonstoichiometry (δ) relaxation in the transition regime. It has been found that the chemical diffusivity appears to exhibit a maximum at the n-to-p transition point where the electronic minimum conductivity falls, and that surface reaction becomes more rate-determining than diffusion as the transition point is approached from both n-type and p-type branches. Experimental details are given and the results are exhaustively compared with those reported up to date on the ‘undoped' BaTiO₃.     

Phase transitions in the superionic protonic conductor CsHSeO4 investigated by Brillouin spectroscopy

A Brillouin investigation in CsHSeO₄ has been performed over the temperature range 20–165 °C which includes two phase transitions, in particular the transition to the superionic phase near T_s = 129 °C. We observed strong discontinuities for elastic constants C₁₁, C₂₂ and C₃₃ at T_s and a broadening of the Brillouin lines above T_s. The results are discussed on the basis of a linear coupling between strains and mobile protons.     

Understanding DsJ(2317)

We analyze the hadronic and radiative decay modes of the recently observed D_sJ(2317) meson, in the hypothesis that it can be identified with the scalar state of spectrum (D_s0). The method is based on heavy quark symmetries and vector meson dominance ansatz. We find that the hadronic isospin violating mode D_s0→D_sπ⁰ is enhanced with respect to the radiative mode D_s0→D_s^*γ. The estimated width of the meson is Γ(D_s0)7 keV.     

Mixed electronic and ionic conductivity of LaCo(M)O3 (M=Ga, Cr, Fe or Ni).: V. Oxygen permeability of Mg-doped La(Ga, Co)O3−δ perovskites

The LaGa_1−x−yCo_xMg_yO_3−δ solid solutions with rhombohedrally-distorted perovskite structure were ascertained to form in the concentration range of 0≤y≤0.10 at x=0.60 and 0≤y≤0.20 at x=0.35–0.40. Increasing cobalt content results in increasing electrical conductivity and thermal expansion of the perovskites. Thermal expansion coefficients of the LaGa_1−x−yCo_xMg_yO_3−δ ceramics were calculated from the dilatometric data to vary in the range of 12.4–19.8×10⁻⁶ K⁻¹ at 300–1100 K. Doping La(Ga,Co)O_3−δ solid solutions with magnesium leads to increasing oxygen nonstoichiometry, electronic and oxygen ionic conductivity. Oxygen permeation fluxes through LaGa_1−x−yCo_xMg_yO_3−δ membranes were found to be limited by the bulk ionic conduction and to increase with magnesium concentration, being essentially independent of cobalt content.     

Scaling behavior of mixed-state hall effect in MgB2 thin films

The Hall resistivity (ρ_xy) and the longitudinal resistivity (ρ_xx) in c-axis-oriented superconducting MgB₂ thin films have been investigated in extended fields up to 18 T. We have observed a scaling behavior between the Hall resistivity and the longitudinal resistivity, , where the exponent (β) is observed to be independent of the temperatures and the magnetic fields. For a wide magnetic field region from 1 to 18 T and a wide temperature region from 10 to 28 K, a universal power law with β = 2.0 ± 0.1 was observed in c-axis-oriented MgB₂ thin films. These results can be well interpreted by using recent models.     

Germanium and iron co-substituted SrCoO2.5+δ as oxygen permeable membrane

Germanium and iron co-doped SrCoO_2.5+δ was investigated in terms of phase stability, oxygen permeability and electrical conductivity. The favorable high-temperature cubic structure of SrCoO_2.5+δ was stabilized to lower temperatures by co-doping Ge (10 mol%) and Fe (10 mol%) that substituted for Co, which however could not be achieved by doping Ge (20 mol%) alone. In contrast to SrCo_0.8Ge_0.2O_2.5+δ sample which showed a sharp decrease in oxygen permeability at temperature of 875 °C upon cooling, SrGe_0.1Co_0.8Fe_0.1O_3−δ sample remained well-permeable to oxygen at lower temperatures down to at least 820 °C; an abrupt change in electrical conductivity in SrCo_0.8Ge_0.2O_2.5+δ also occurred accompanying the phase transition. The oxygen permeation flux for SrGe_0.1Co_0.8Fe_0.1O_3−δ increased significantly with the decrease of the membrane thickness, indicating the transport of oxygen ions in the bulk of the membrane as the rate-limiting step.