亚波长金属光栅的光耦合增强效应及透射局域化的模拟研究

介质层上的亚波长金属光栅产生的表面等离子体（surface plasmons,SPs）可以极大地增强光栅下介质层内的透射光强.增强作用从500 nm延续到近红外区域.在波长610 nm附近有接近110%的增强,在波长700 nm及740 nm处也有180%左右的增强.而这个波长范围与薄膜太阳能电池的吸收谱很相近,因此这种结构有望大幅度提高薄膜太阳能电池及不同波长光探测器等光电转换器件的光耦合效率. 关键词： 表面等离子体 亚波长光栅 薄膜太阳能电池 透射增强     

横电波激励下亚波长一维金属光栅的异常透射性

针对一维亚波长金属光栅异常透射现象实现的问题,利用时域有限差分法,对横电波（TE波）激励带电介质的亚波长一维金属光栅的光场分布进行了模拟分析,得到了TE波的透射率与电介质折射率的变化关系,从而发现TE波在所研究的模型下具有异常透射现象.基于导模共振理论建立了类导模共振理论,并应用该理论较好地解释了TE波在所研究模型下的异常透射现象,确定类导模共振是TE波产生异常透射性的主要原因.应用所建立的理论解决了传统透射理论无法解决的问题.类导模共振理论揭示了异常透射现象的物理本质,为进一步研究异常透射性的物理本质提 关键词： 金属光栅 横电波 异常透射 类导模共振     

TE激励下金属光栅电荷振荡的异常透射及其表面波分析

 利用时域有限差分法,对TE偏振光（电场平行狭缝方向）激励下,不同结构和参数的带电介质亚波长一维金属光栅的光场分布进行了数值模拟实验。根据金属表面电荷分布理论和表面波理论对此现象进行了物理机理分析,通过分析可以得出在金属狭缝处产生柱面表面波,这种表面波可以突破衍射极限,从而引起异常透射;并且根据Ag的表面电荷分布及其激发机理分析,得到了透射峰位置与介质覆层厚度变化的动态响应以及金属薄膜厚度改变时透射率与波长变化的动态关系,确定了柱面表面波是该异常透射现象产生的一个重要原因。理论分析与模拟实验结果一致,从而为TE偏振光激励下的异常透射机理深入研究和结构参数的选择提供了较好的理论依据。     

一维金属光栅的透射光学特性

利用时域有限差分法模拟了一维金属光栅的透射光场的分布及光栅厚度等因素对透射光谱的影响.结果表明:特定波长的光通过金属光栅中的亚波长狭缝时有异常大的透过率增强.分析其物理起源,认为是类FabryPerot(FP)腔作用的结果.基底介电常量对类FP腔长度的调制导致了对透射光谱的影响.金属光栅表面激发的表面等离子体激元波与多缝干涉一样,对透射光谱有一定的影响,但不是形成增强的原因 关键词： 金属光栅 透射光学特性     

Fabry-Perot腔谐振对横电波激励下亚波长一维金属光栅的异常透射性的作用

利用时域有限差分法,对横电波(TE波)激励带电介质的亚波长一维金属光栅的光场分布进行了模拟分析,发现TE波在所研究的模型下具有异常透射现象.探究其物理本质,确定类导模共振理论是第一个峰和第二个峰产生的主要原因.在此基础上,从麦克斯韦方程出发,通过有效折射率法,确定了类Fabry-Perot(F-P)腔谐振是产生第三个峰的主要原因.从而完善了TE波在所研究的模型下产生异常透射现象的物理本质.为进一步研究TE波异常透射性的物理本质提供了一种完整的理论依据. 关键词： 金属光栅 横电波 异常透射 类Fabry-Perot腔谐振     

Reflection and transmission of acoustic waves on multilayered porous media

Based on the Boit theory of acoustic wave propagation in fluid-satu-rated porous medium we have studied in this paper the acoustic reflection andtransmission on multilayered porous media,in which the adequate boundaryconditions across the interfaces are taken into account.Numerical calculationsof the reflection and transmission coefficients at different incident angles andfrequencies of the fast compressional wave incident on porous media with threeor four layers are presented.The results indicate that the maximum or mini-mum reflection and transmission coefficients appear at certain ratios of thewavelength to the thickness.The acoustic incident angle and porous mediumproperties are shown to affect significantly these coefficients.As an example,the measured transmission coefficients in a water-saturated fused glass beadsample are in good agreement with theoretical prediction.     

Broadband and broad-angle asymmetric acoustic transmission by unbalanced excitation of surface evanescent waves based on single-layer metasurface

Currently, complicated structure, incident-angle selectivity, and narrow frequency band are the key drawbacks of the asymmetric acoustic transmission (AAT) devices. Here we tackle these problems by proposing a class of single-layer lossy acoustic metasurfaces. The broadband AAT performance is realized in a broad range of incident angles. When the incident angle is in the range between two critical values, which are derived in this paper, an external sound wave can be converted into an evanescent mode, and the total internal reflection occurs for backward sound. The incident sound wave can be negatively refracted for forward sound if the evanescent mode conversion condition is broken, representing the realization of the AAT. However, the AAT phenomenon cannot be observed outside of the range defined above. The proposed design of highly efficient broad-angle AAT can find applications in sound sensing and noise control.     

Surface plasmon resonance transmission filters at 1053nm based on metallic grating with narrow slit

Metallic gratings with narrow slits can lead to special optical properties such as strongly enhancing the transmission and considerably strengthening the polarized effect. A narrow-band filter suitable for application in optical communication is designed by sandwiching a metallic grating between two identical dielectric films. The maximum transmission can reach 96% after optimizing the parameters of films and grating at a central wavelength of 1053 nm. It is the first time, to our knowledge, that such high transmission has been reported since the discovery of the extraordinarily high transmission through periodic holes or slits; moreover, the extremely polarized effect is also found in P mode of this symmetric grating.     

Peculiar transmission property of acoustic waves in a one-dimensional layered phononic crystal

In this article, we report both theoretical calculation and experimental observation of acoustic waves abnormally through a one-dimensional layered transmitted phononic crystal at frequencies within the band gap into a material of large acoustic impedance mismatch, with an efficiency as high as unity. The transmission peaks can be interpreted as a result of the interference of acoustic waves reflected from all periodically aligned interfaces. The condition for the appearance of peaks is analyzed in detail and the optimized layer number is given for different configurations.     

Extraordinary optical transmission through metal gratings with single and double grooved surfaces

We investigate the transmission properties of a normally incident TM plane wave through metal films with periodic parabolic-shaped grooves on single and double surfaces using the finite-difference-time-domain method. Nearly zero transmission efficiency is found at wavelengths corresponding to surface plasmon excitation on a flat surface in the case where the single surface is grooved. Meanwhile, resonant excitation of surface plasmon polariton (SPP) Bloch modes leads to a strong transmission peak at slightly larger wavelengths. When the grating is grooved on double surfaces, the transmission enhancement can be dramatically improved due to the resonant tunnelling between SPP Bloch modes.     

宽带太赫兹波在大气中的远程探测研究及展望*

宽带太赫兹波由于具有传输容量大、速率高、方向性好、安全性高、散射小及穿透性好等许多特性,使太赫兹技术在高保密卫星通信、短距离无线通信等方面具有独特的优势。但是,如何克服大气中水蒸气的强吸收,找出适合太赫兹通信的频段,是发展宽带太赫兹远程传输亟待解决的问题。文章介绍了宽带太赫兹波在大气中远程探测的一些关键技术和最新研究成果,同时,对太赫兹通信技术的发展趋势和应用前景作了展望。     

内嵌矩形腔楔形金属狭缝的增强透射

金属薄膜上亚波长金属狭缝的非共振光增强透射对宽频带光子器件的设计具有重要意义. 为增强金属狭缝的光透射, 设计了内嵌矩形腔楔形金属狭缝阵列, 并用有限元方法研究了该结构的透射特性. 结果表明, 内嵌矩形腔的楔形金属狭缝阵列比无矩形腔的楔形金属狭缝阵列透射率高. 此外, 还研究了矩形腔的结构参数和位置对内嵌矩形腔楔形金属狭缝阵列透射特性的影响. 这些结果将对设计具有更高透射能力的金属狭缝具有一定的指导意义. 关键词： 光异常透射 金属狭缝 表面等离极化激元     

双层金属纳米光栅的TE偏振光异常透射特性

根据在亚波长金属光栅表面添加电介质会引起TE偏振光的透射异常性, 应用严格耦合波理论和时域有限差分方法, 研究了双层金属纳米光栅在TE偏振光入射时产生的异常透射现象. 利用等效折射率方法建立了双层金属光栅的等效模型, 得到了TE偏振光透射率与聚合物的折射率、厚度以及金属层厚度的变化关系. 确认了结构中聚合物是透射异常出现的必要条件, TE偏振光以波导电磁模式在其中传播, 并认为类Fabry-Perot腔谐振是透射峰值产生的主要原因.     

二维亚波长金属小孔阵列的透射光增强效应

对金属薄膜上的二维亚波长小孔阵列的光透射增强现象进行了数值模拟，结果显示不仅实际金属薄膜上的小孔阵列结构具有透射增强效应，理想导体薄膜的相同结构也具有透射增强效应，但没有实际金属薄膜的增强明显-通过分析指出，这种小孔阵列的光透射增强效应是一种复杂的波导耦合效应-与金属薄膜上的表面电流一样，表面等离激元波具有将入射光能量从金属表面向小孔转移的作用，但不是透射增强的本质原因- 关键词： 表面电流 共振耦合 透射增强 表面等离激元     

压电晶体-液体-各向同性固体分层结构中的声反射和声透射

本文给出由压电晶体－液体－各向同性固体组成的分层结构中声反射和声透射的一些理论结果，与不考虑介质压电性的情形相比，反射和秀射声场具有大的复杂性，与晶体取向，界面电边界条件等均有关。     

Effects of a bar on optical transmission through Z-shaped metallic slit arrays

We investigate the effects of a bar on optical transmission through Z-shaped metallic slit arrays by using the finite-difference time domain (FDTD) method. A new hybrid Fabry-Perot (FP) surface plasmon polariton (SPP) mode emerges when changing the geometric parameters of the bar, and this mode can be viewed as a coupling between FP mode and SPP mode. In addition, an obvious dip appears in a featured area when the bar deviates from the central line, and a small displacement of the bar leads to tremendous change of the dip. These behaviors can be attributed to the phase resonance. In short, the structure is very sensitive to the metal bar. Furthermore, it combines photonic device miniaturization with sensitivity, which is useful for making optical switches.     

透射式光栅光谱仪摄谱性质的研究

本文从理论和实验上探讨了透射光栅的光栅参数和实验几何条件对于光栅的衍射效率、色散、光谱对称性及散射本底的影响,对于这些摄谱性质的了解,将有助于实验数据的分析。     

Insertion loss of sound waves through composite acoustic window materials

This study evaluated the insertion loss of sound waves through composite acoustic window materials for sonar dome applications, and examined the influence of dome shape on the sonar performance. The insertion loss of sound waves through acoustic window materials was experimentally measured as a function of frequency at normal incidence. The insertion loss was also theoretically estimated with three- and four-medium layer models. The theoretical estimation of insertion loss showed good agreement with the experimental measurements. The insertion loss was also measured as a function of angle of incidence. The characteristics of longitudinal and converted shear waves were observed at various angles of incidence. This study will be useful to select acoustic window materials with the appropriate acoustic characteristics for practical sonar dome applications.     

Period interaction on diffraction efficiency of blazed transmission gratings

The period interaction on diffraction of the blazed transmission gratings is analyzed with a modified extended scalar theory. For one certain period, the lights reflected from the neighboring structures can be refracted by the grating facets and form two extra fields on the bottom facet of blazed transmission gratings. The effects of this period interaction versus several diffraction orders for a fixed fabrication error of blazed transmission gratings with intermediate structures are discussed for both TE and TM polarizations. The results have been compared with those obtained with finite-difference time-domain method.     

软X射线位相型金透射光栅的设计与制作

根据衍射光栅的标量理论,计算并讨论了金透射光栅在软X波段衍射效率对光栅厚度和占宽比的依赖关系.结果表明,选择合适的光栅槽深和占宽比,高达 21.9%的衍射效率可能被获得,远高于振幅型光栅的+1级衍射效率10.14%.通过全息光刻与电镀转移技术制作的位相型金透射光栅由300nm的聚酰亚胺薄膜支撑,光栅槽深200nm,占宽比为0.55,周期为1μm,面积为20mm×5mm.在国家同步辐射装置上,测得其+1级透射衍射效率在波长λ=7.425nm时获得最大值,约为16%. 关键词： 透射位相光栅 全息光刻 电镀