Ultrasonic-Combined Plasma Bubbling for Adherent Bacteria Disinfection on Medical Equipment

Plasma Chemistry and Plasma Processing - Atmospheric low-temperature plasma has received attention for application in disinfection methods. In this study, we develop a plasma bubbling method as a...     

Analysis of long-lived radionuclides by ICP-MS

Inductively Coupled Plasma Mass Spectrometry ICP-MS has been applied to the characterisation of various nuclear waste forms. Long-lived radionuclides can be determined with similar sensitivities. The installation of an ICP-MS in a glove box and applications and limitations of the methods to nuclear materials, with especial emphasis on isobaric interferences are described.     

Metabolite profiling of human plasma by different extraction methods through gas chromatography–mass spectrometry—An objective comparison

For the comprehensive metabolite profiling of human plasma, sample preparation is a crucial step. In this investigation, we have compared 10 different extraction techniques for metabolite profiling by GC–MS. Six one-dimensional (1D) and four two-dimensional (2D) extraction techniques involving solvent precipitation, molecular weight cut off tube (MWCOT) and solid phase extraction (SPE) by using silica, RP C18, cation and anion were investigated. Pooled samples of 50 Healthy Male Plasma (HMP), 50 Healthy Female Plasma (HFP) and 100 Healthy Pakistani Plasma (HPP) were subjected to these extraction methods for comparison purposes. Metabolites obtained were identified through NIST mass spectral (Wiley registry), METLIN and Fiehn RTL libraries. XCMS Software was used for the detection of metabolic features, retention time correction, alignment, annotation and statistical analysis in each method. 116–34 peaks were detected by various methods and approx 33% of the peaks were characterized in each method. Hierarchical clustering of the 10 extraction methods showed a low similarity index (50.1%) which indicated different chemical nature of metabolites, resulting from different methods. Venn diagram highlights the GC–MS peaks (33–77%) common in various methods. Metabolites which were different in male and female groups were detected using a threshold value of p ≤ 0.0001, q ≤ 0.001 and fold change ≥3 by employing Welch's t-test and identified through METLIN. Results indicated that 2D-C18 and 2D-silica offers a comprehensive metabolite profile in term of reproducibility, number of peaks and difference in metabolite pattern of male and female.     

Trace-matrix separations for high-purity chromium,molybdenum and tungsten with cellulose collectors

Trace metals (20 elements) in high-purity chromium, molybdenum and tungsten are collected and preconcentrated by precipitation and adsorption on cellulose collectors. The compound methods allow the application of AAS and ICP-AES as determination methods for the production control of highly pure refractory metals under routine conditions.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Determination of boron concentration in borosilicate glass,boron carbide and graphite samples by conventional wet-chemical and nuclear analytical methods

Boron is an important element in nuclear technology. A comparative study was carried out for the determination of boron in borosilicate glass, boron carbide and graphite samples by wet-chemical and nuclear analytical methods. Wet chemical methods namely titrimetry, Inductively Coupled Plasma Mass Spectrometry and ICP Optical Emission Spectrometry and nuclear analytical methods namely Particle Induced Gamma-Ray Emission and Nuclear Reaction Analysis were used. Boron concentrations were in trace (mg kg^?1) level in graphite and percentage level in borosilicate glass and boron carbide.     

Plasma Characteristics and Plasma-Feedstock Interaction Under PS-PVD Process Conditions

Plasma spray-physical vapor deposition (PS-PVD) is a novel coating process based on plasma spraying. In contrast to conventional methods, deposition takes place not only from liquid splats but also from nano-sized clusters and from the vapor phase. This offers new opportunities to obtain advanced microstructures and thus to comply with growing demands on modern functional coatings. In this study, different process conditions were investigated with regard to the application of the PS-PVD process for ceramic thermal barrier coatings. Plasma characteristics were calculated under chemical equilibrium conditions by minimizing the Gibbs energy. The plasma-feedstock interaction was modeled taking into account the particular conditions at very low pressure. Since the plasma is highly rarefied, the small feedstock particles are in the free molecular flow regime. Hence, continuum methods commonly used in fluid mechanics and heat transfer approaches with continuous boundary conditions are not appropriate; alternative methods based on the kinetic theory of gases are required. The experimental results confirm the predictions about the degree of vaporization made by such calculations. In particular, they show that the feedstock treatment mainly takes place within the very first trajectory segment between injector and jet expansion.     

锂嵌脱化合物LiMn2O4的微波烧结研究

本文用微波烧结法合成锂嵌脱材料ＬｉＭｎ２Ｏ４，研究了微波烧结功率，时间的固态产物相的影响，对ＬｉＭｎ２Ｏ４单相多晶粉末进行了ＸＲＤ，ＩＲＭ，ＸＰＳ，等离子体发射光谱及氧化还原等测试。     

On the Possibilities of Straightforward Characterization of Plasma Activated Water

Plasma Chemistry and Plasma Processing - Plasma activated deionized water from a hot arc 150 W PAW synthesizer has been analyzed for nitrite, nitrate and peroxide densities. Observed nitrite and...     

Characterization of Various Air Plasma Discharge Modes in Contact with Water and Their Effect on the Degradation of Reactive Dyes

Plasma Chemistry and Plasma Processing - Plasma in- or in-contact-with liquid is an emerging technology that has high potential for use in liquid treatment applications. Due to the simultaneous...     

Ex Situ Chemical Determination of Free Radicals and Peroxides on Plasma Treated Surfaces

Ex situ determinations of free radicals by 2,2-Diphenyl-1-pricylhydrazyl (DPPH) method and of peroxides by the iodine method applied to plasma treated surfaces were examined. Plasma polymers and plasma-treated polymers, which are already exposed to ambient oxygen, the original free radicals could be detected as peroxides. It was found that the specificity of the both methods was not high enough for quantitative determination. Chemical cleaning of aluminum alloy surfaces, such as alkaline cleaning and deoxidizing treatment, was found to leave large amount of DPPH scavengers, which could be removed by argon or oxygen plasma treatment, implying that the reactivity of DPPH is not exclusive to free radicals. DPPH method should be viewed as an analytical tool to detect scavengers of DPPH (rather than free radicals) existing on the surface region accessible to the DPPH solution. The iodine method should be likewise viewed as an analytical tool for iodine-liberating species existing on the surface region. Plasma treatment (O₂ or Ar) of aluminum surface did not remove the species, and in some cases increased the amount. The both methods could be used as tools to assess the overall surface reactivity, particularly of metals, which could influence the adhesion of coatings.     

Monitoring of Mycophenolic Acid in the Plasma of Transplant Patients by Capillary Electrophoresis

Plasma samples from 60 transplant patients on mycophenolate mofetil therapy were analysed using validated capillary electrophoresis (CE) method to determine mycophenolic acid (MPA) and its main metabolite mycophenolic acid glucuronide. Enzyme multiplied immunoassay technique (EMIT) values were available for the same samples. The differences between the results from the two methods was clarified by using Bland–Altman analysis and further statistical analysis. More than 90% of the results showed a positive bias, with EMIT giving higher levels than CE.     

Byproducts Generation Characteristics of Non-thermal Plasma for NO Conversion: Effect of Reaction Conditions

Plasma Chemistry and Plasma Processing - Over the years, the combined Non-thermal Plasma (NTP) denitrification process which is used for decomposition of NOx has have become an application...     

Analysis of archaeological artefacts: PIXE, XRF or ICP-MS?

Elemental analysis of ancient artefacts is of considerable benefit to the field of Archaeology and of general interest to earth scientists. Several techniques are currently available for this purpose, and in this paper the capabilities of PIXE (Particle Induced X-ray Emission), XRF (X-ray Fluorescence) and ICP-MS (Inductively Coupled Plasma - Mass Spectrometry) were evaluated to establish which of these instrumental methods was best suited especially for routine on-line usage. The elements of interest discussed in this paper are useful in archaeological provenance studies.     

Improvement of Seed Germination Rate,Agronomic Traits,Enzymatic Activity and Nutritional Composition of Bread Wheat (Triticum aestivum) Using Low-Frequency Glow Discharge Plasma

Plasma Chemistry and Plasma Processing - Plasma agriculture is an emerging field. In this report, we studied the effect of medium pressure (~?10 torr) low-frequency...     

Etching Characteristic of Graphite and Metal Substrates by Hydrocarbon Plasma in Closed Cavity

Plasma Chemistry and Plasma Processing - Plasma can be used to effectively remove coke from a metal surface. The plasma etching conditions of coke and emission spectrum characteristics on the metal...     

Special Issue of Plasma Chemistry and Plasma Processing Scale-Up of Plasma Reactors for Bio,Chemical, Environmental,Materials, and Energy Applications

Plasma Chemistry and Plasma Processing -     

Erratum to: Experimental and Theoretical Optimization of Radio Frequency Hollow Cathode Discharge

Plasma Chemistry and Plasma Processing -     

Remarks Relative to the Use of Atmospheric Plasma-Pulsed Discharge for PET Bottles Instant Sterilization

Plasma Chemistry and Plasma Processing -     

A review of the EPRI-sponsored workshop on research opportunities for Plasma Processing

Plasma Chemistry and Plasma Processing -