Impedance spectroscopy and conductometric biosensing for probing catalase reaction with cyanide as ligand and inhibitor

In this work, a new biosensor was prepared through immobilization of bovine liver catalase in a photoreticulated poly (vinyl alcohol) membrane at the surface of a conductometric transducer. This biosensor was used to study the kinetics of catalase–H₂0₂ reaction and its inhibition by cyanide. Immobilized catalase exhibited a Michaelis–Menten behaviour at low H₂0₂ concentrations (< 100 mM) with apparent constant K_M^app = 84 ± 3 mM and maximal initial velocity V_M^app = 13.4 μS min^? 1. Inhibition by cyanide was found to be non-competitive and inhibition binding constant K_i was 13.9 ± 0.3 μM. The decrease of the biosensor response by increasing cyanide concentration was linear up to 50 μM, with a cyanide detection limit of 6 μM. In parallel, electrochemical characteristics of the catalase/PVA biomembrane and its interaction with cyanide were studied by cyclic voltammetry and impedance spectroscopy. Addition of the biomembrane onto the gold electrodes induced a significant increase of the interfacial polarization resistance R_P. On the contrary, cyanide binding resulted in a decrease of Rp proportional to KCN concentration in the 4 to 50 μM range. Inhibition coefficient I₅₀ calculated by this powerful label-free and substrate-free technique (24.3 μM) was in good agreement with that determined from the substrate-dependent conductometric biosensor (24.9 μM).     

Spectroscopic studies on the interaction between Pr(III) complex of an ofloxacin derivative and bovine serum albumin or DNA

The binding properties on [PrL₂(NO₃)](NO₃)₂ (L = 9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperaziny)-7-oxo-7Hpyrido[1,2,3-de]-1,4-benzoxazine-6-carbaldehyde benzoyl hydrazone) to bovine serum albumin (BSA) have been studied for the first time using fluorescence spectroscopy in combination with UV–Vis absorbance spectroscopy. The results showed that [PrL₂(NO₃)](NO₃)₂ strongly quenched the intrinsic fluorescence of BSA through a static quenching procedure, and non-radiation energy transfer happened within molecules. The number of binding site was about 1, and the efficiency of Förster energy transfer provided a distance of 4.26 nm between tryptophan and [PrL₂(NO₃)](NO₃)₂ binding site. At 288, 298, 310 K, the quenching constants of BSA–[PrL₂(NO₃)](NO₃)₂ system were 5.11 × 10⁴, 4.33 × 10⁴ and 3.71 × 10⁴ l M^?1. ΔH, ΔS and ΔG were obtained based on the quenching constants and thermodynamic theory (ΔH < 0, ΔS > 0 and ΔG < 0). These results indicated that hydrophobic and electrostatic interactions are the mainly binding forces in the [PrL₂(NO₃)](NO₃)₂–BSA system. In addition, the CD spectra have proved that BSA secondary structure changed in the presence of [PrL₂(NO₃)](NO₃)₂ in aqueous solution. Moreover, the interaction between [PrL₂(NO₃)](NO₃)₂ and calf thymus DNA (CT DNA) was studied by spectroscopy and viscosity measurements, which showed that the binding mode of the [PrL₂(NO₃)](NO₃)₂ with DNA is intercalation. The DNA cleavage results show that in the absence of any reducing agent, the [PrL₂(NO₃)](NO₃)₂ can cleave plasmid pBR322 DNA and its hydrolytic mechanism was demonstrated with hydroxyl radical scavengers and singlet oxygen quenchers.     

Synthesis and molecular modeling study of Cu(Ⅱ) complexes derived from 2-(diphenylmethylene)hydrazinecarbothioamide derivatives with cholinesterase inhibitory activities

Thiosemicarbazones of 2-amino-5-chlorobenzophenone and 3-aminobenzophenone（L¹-L⁴） have been synthesized and their Cu（Ⅱ） complexes（1-4） were afforded via coordination with cupric chloride.All these compounds were characterized by UV-vis and IR spectroscopy together with CHN elemental analysis.NMR spectroscopy was also applied to characterize the ligands.In vitro chohnesterase inhibitory assays for the complexes（1-4） showed IC₅₀ values less than 10μmol/L,with complex 1 exhibiting the most activity,IC₅₀=2.15μmol/L and 2.16μmol/L for AChE and BuChE,respectively. Molecular modeling simulation revealed the binding interaction template for complex 1 with the AChE and BuChE receptors.In DPPH assay,the complexes also showed more in vitro antioxidant activities in comparison to their parent ligands.     

Fluorescence studies on the interaction of hydrophobic ligands with Momordica charantia (bitter gourd) seed lectin

The interaction of Momordica charantia (bitter gourd) seed lectin (MCL) with several nucleic acid bases has been investigated by monitoring changes induced in the protein fluorescence by ligand binding. Values of the binding constant, K_a were obtained as 1.1 × 10⁴, 1.56 × 10⁴ and 2.2 × 10³ M^?1 for adenine, cytosine and uracil, respectively. In addition, binding of 8-anilinonaphthalene 1-sulfonate (ANS) with MCL was investigated by fluorescence spectroscopy. Interaction with MCL at low pH results in a large enhancement of the fluorescence intensity of ANS with a concomitant blue shift in the emission λ_max, whereas at neutral and basic pH changes in both fluorescence intensity and emission maximum were very small, clearly suggesting that the MCL–ANS interaction is stronger at lower pH values. When excited at 295 nm in the presence of ANS, the protein fluorescence decreased with a concomitant increase in the emission intensity of ANS, suggesting resonance energy transfer from the tryptophan residues of MCL to ANS. Gel filtration profiles of MCL at pH values 2.0 and 7.4 are similar indicating that the tetrameric nature of MCL is retained even at low pH. Addition of lactose or adenine to MCL–ANS mixture did not alter the change in ANS fluorescence suggesting that lactose, adenine and ANS bind to MCL at independent and non-interacting sites. These results are relevant to understanding the functional role of MCL in the parent tissue.     

Annealing temperature dependent catalytic water oxidation activity of iron oxyhydroxide thin films

Nanostructured iron oxyhydroxide(Fe OOH) thin films have been synthesized using an electrodeposition method on a nickel foam(NF) substrate and effect of air annealing temperature on the catalytic performance is studied. The as-deposited and annealed thin films were characterized by X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS), field emission scanning electron microscopy(FE-SEM) and linear sweep voltammetry(LSV) to determine their structural, morphological, compositional and electrochemical properties, respectively. The as-deposited nanostructured amorphous Fe OOH thin film is converted into a polycrystalline Fe_2O_3 with hematite crystal structure at a high temperature. The Fe OOH thin film acts as an efficient electrocatalyst for the oxygen evolution reaction(OER) in an alkaline 1 M KOH electrolyte. The film annealed at 200 °C shows high catalytic activity with an onset overpotential of 240 m V with a smaller Tafel slope of 48 m V/dec. Additionally, it needs an overpotential of 290 mV to the drive the current density of 10 m A/cm~2 and shows good stability in the 1 M KOH electrolyte solution.     

Investigation of the interaction of DNA and neutral red by fluorescence spectroscopic analysis

The binding characteristics of neutral red (NR) with DNA were investigated by fluorescence spectrometry. Chemometrics approach as singular value decomposition (SVD) was used to evaluate the number of spectral species in the drug-DNA binding process, and then the intrinsic binding constant of 1.6 × 104 in base pairs and the binding site number of 0.97 were obtained from the Scatchard plot.     

Melamine modified carbon felts anode with enhanced electrogenesis capacity toward microbial fuel cells

Surface electropositivity and low internal resistance are important factors to improve the anode performance in microbial fuel cells(MFCs). Nitrogen doping is an effective way for the modification of traditional carbon materials. In this work, heat treatment and melamine were used to modify carbon felts to enhance electrogenesis capacity of MFCs. The modified carbon felts were characterized using X-ray photoelectron spectroscopy(XPS), scanning electron microscope(SEM), atomic force microscopy(AFM)and malvern zeta potentiometer. Results show that the maximum power densities under heat treatment increase from 276.1 to 423.4 m W/m~2(700 °C) and 461.5 m W/m~2(1200 °C) and further increase to472.5 m W/m~2(700 °C) and 515.4 m W/m~2(1200 °C) with the co-carbonization modification of melamine.The heat treatment reduces the material resistivity, improves the zeta potential which is beneficial to microbial adsorption and electron transfer. The addition of melamine leads to the higher content of surface pyridinic and quaternary nitrogen and higher zeta potential. It is related to higher MFCs performance. Generally, the melamine modification at high temperature increases the feasibility of carbon felt as MFCs' s anode materials.     

Gas permeation properties of poly(lactic acid)

The need for the development of polymeric materials based on renewable resources has led to the development of poly(lactic acid) (PLA) which is being produced from a feedstock of corn rather than petroleum. The present study examines the permeation of nitrogen, oxygen, carbon dioxide, and methane in amorphous films of PLA cast from solution. The properties of PLA are compared to other commodity plastics and it is shown that PLA permeation closely resembles that of polystyrene. At 30°C, N₂ permeation in PLA is 1.3 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and the activation energy is 11.2 kJ/mol. For oxygen the corresponding values are 3.3 (10⁻¹⁰ cm³(STP) cm/cm² s cm Hg) and 11.1 kJ/mol. The values for carbon dioxide permeation are 1.2 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and 6.1 kJ/mol. For methane values of 1.0 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and an activation energy of 13.0 kJ/mol are found. Studies with pure gases show that polymer chain branching and small changes in l:d stereochemical content have no effect on permeation properties. Crystallinity is found to dominate permeation properties in a biaxially oriented film. The separation factor for a CO₂/CH₄ mixed gas system is measured between 0 and 50°C and does not deviate significantly from the calculated ideal separation factor; at 0°C the separation factor is 16, a value that suggests continued studies of PLA as a separation medium are warranted.     

A novel method for Co(Ⅱ) and Cu(Ⅱ) analysis by capillary electrophoresis with chemiluminescence detection

Based on the fact that some metal ions can catalyze the chemiluminescence(CL)reaction of luminol with K_3Fe(CN)_6,a novel capillary electrophoresis CL method was developed for the determination of Co(Ⅱ)and Cu(Ⅱ).The separation was carried out with a 10 mmol/L sodium acetate solution containing 0.8 mmol/L luminol and 2.0 mmol/Lα-HIBA(adjusted to pH 4.8 by HAc solution).The post-capillary reagent was 2.0 mmol/L K_3Fe(CN)_6 which was adjusted to pH 13.0 by NaOH solution.Under the optimum conditions,the detection limits(S/N=3)for Co(Ⅱ)and Cu(Ⅱ)were 7.5×10~(-11)mol/L and 7.5×10~(-9)mol/L,with the linear range of 7.5×10~(-9)mol/L to 1.0×10~(-6)mol/L and 7.5×10~(-8)mol/L to 5.0×10~(-5)mol/L, respectively.     

A novel sensitive non-enzymatic glucose sensor

Cu nanoclusters were electrochemically deposited on the film of a Nafion-solubilized multi-wall carbon nanotubes (CNTs) modified glassy carbon electrode (CNTs-GCE), which fabricated a Cu-CNTs composite sensor (Cu-CNTs-GCE) to detect glucose with non-enzyme. The linear range is 7.0×10-7 to 3.5×10-3 mol/L with a high sensitivity of 17.76μA/(mmol L), with a low detection limit 2.1×10-7 mol/L, fast response time (within 5 s), good reproducibility and stability.     

Potentiometric determination of diclofenac in pharmaceutical formulation by membrane electrode based on ion associate with base dye

The characteristics,performance and application of membrane electrode based on ion associate of diclofenac with base dye Safranine T are described.The electrode response to diclofenac has the sensitivity of 47±1.0 mV decade~(-1)over the range of 5×10~(-5)to 5×10~(-2)mol/L at pH 6-12,and the detection limit of 3.2×10~(-5)mol/L.The electrode is easy assembled at a relatively low cost has fast response time(2-4 s)and can be used for a period up to 3.5 months without any considerable divergence in potential.The proposed sensor displayed good selectivity for diclofenac in the presence of different substances.It was used to determine diclofenac in pharmaceuticals by means of the standard addition method.     

Amperometric glucose sensor based on glucose oxidase immobilized on gelatin-multiwalled carbon nanotube modified glassy carbon electrode

We investigated the direct electrochemistry of glucose oxidase (GOx) at gelatin-multiwalled carbon nanotube (GCNT) modified glassy carbon electrode (GCE). GOx was covalently immobilized onto GCNT modified GCE through the well known glutaraldehyde (GAD) chemistry. The immobilized GOx showed a pair of well-defined reversible redox peaks with a formal potential (E⁰′) of ? 0.40 V and a peak to peak separation (ΔE_p) of 47 mV. The surface coverage concentration (Г) of GOx in GCNT/GOx/GAD composite film modified GCE was 3.88 × 10^? 9 mol cm^? 2 which indicates the high enzyme loading. The electron transfer rate constant (k_s) of GOx immobilized onto GCNT was 1.08 s^? 1 which validates a rapid electron transfer processes. The composite film shows linear response towards 6.30 to 20.09 mM glucose. We observed a good sensitivity of 2.47 μA mM^?1 cm^? 2 for glucose at the composite film. The fabricated biosensor displayed two weeks stability. Moreover, it shows no response to 0.5 mM of ascorbic acid (AA), uric acid (UA), acetaminophen (AP), pyruvate (PA) and lactate (LA) which shows its potential application in the determination of glucose from human serum samples. The composite film exhibits excellent recovery for glucose in human serum at physiological pH with good practical applicability.     

Conformational and stereoelectronic investigation of chloromethyl methyl sulfide and its sulfinyl and sulfonyl analogs

Three compounds based on polyoxometalate building blocks, [Cu(en)₂]{[Cu(en)₂]₂[Mo^VI₅Mo^V₃V^IV₈O₄₀(PO₄)]} · 4H₂O (1), [Co(en)₂]{[Co(en)₂]₂[HMo^VI₄Mo^V₄V^IV₈O₄₀(PO₄)]} · 5H₂O (2) and [Ni(en)₂]{[Ni(en)₂]₂[Mo^VI₅Mo^V₃V^IV₈O₄₀(VO₄)]} · 2H₂O (3) (en = ethylenediamine), have been synthesized and characterized by elemental analysis, IR, XPS, XRD, TGA and single-crystal X-ray diffraction analysis. The result of structure determination shows that isomorphic compounds 1, 2 and 3 feature a one-dimensional chain built from the reduced tetra-capped pseudo-Keggin polyoxoanion, which is further interconnected by [M(en)₂]²⁺ (M = Cu, Co and Ni) groups via the terminal oxygen atoms of polyoxoanions. The crystal data for these compounds are the following: 1, monoclinic, space group C2/c, a = 26.702(3) Å, b = 13.4539(14) Å, c = 19.5987(19) Å, β = 108.650(2)°, V = 6671.0(12) Å³, Z = 4; 2, monoclinic, space group C2/c, a = 26.244(3) Å, b = 13.5070(17) Å, c = 19.581(3) Å, β = 106.881(2)°, V = 6641.8(15) Å³, Z = 4; 3, monoclinic, space group C2/c, a = 26.2789(15) Å, b = 13.5408(6) Å, c = 19.6312(9) Å, β = 106.2590(10)°, V = 6706.1(6) Å³, Z = 4. Variable-temperature magnetic susceptibility measurements of compounds 1 and 3 reveal the feature of antiferromagnetic exchange in these compounds.     

Selective binding of bile salts by β-cyclodextrin derivatives with appended quinolyl arms

Two β-cyclodextrin derivatives bearing appended quinolyl and isoquinolyl arms,i.e.mono-(6-quinolyl- 6-deoxy)-β-cyclodextrin(1) and mono-(6-isoquinolyl-6-deoxy)-β-cyclodextrin(2) were synthesized in satisfactory yields and fully characterized.Their original conformations and binding behaviors toward four bile salt guests,that is,sodium cholate(CA),sodium deoxycholate(DCA),sodium glycocholate (GCA),and sodium taurocholate(TCA),were investigated by means of fluorescence,circular dichroism and 2D NMR spectroscopy.The study of solution structures revealed that both quinolyl and isoquinolyl arms were located outside the cyclodextrin cavity.The results obtained from the fluorescence titrations showed that the binding abilities of hosts 1 and 2 with selected bile salts varied in an order of DCA > CA > GCA.The selective binding of hosts toward bile salt guests was discussed from the viewpoints of induced-fit and multiple binding.     

Determination of resveratrol in red wine by solid phase extraction-flow injection chemiluminescence method

A sensitive flow injection chemiluminescence method has been developed for the detection of resveratrol in red wine based on the fact that resveratrol can greatly enhance chemiluminescence reaction between KMnO_4 and HCHO in sulfuric acid medium. Analytes were pre-concentrated on solid sorbents (C_(18) solid-phase extraction cartridges).Under the optimum conditions,the proposed method allows the measurement of resveratrol over the range of 1.32×10~(-8) to 1.32×10~(-5) mol/L with a detection limit of 3.30×10~(-9) mol/L,and the relative standard deviation for 1.32×10~(-5) mol/L resveratrol (n=11) is 3.8%.This method has been successfully applied for the determination of the resveratrol in red wine.Furthermore,the possible reaction mechanism was also discussed.     

A structure-based analysis of the vibrational spectra of nitrosyl ligands in transition-metal coordination complexes and clusters

The vibrational spectra of nitrogen monoxide or nitric oxide (NO) bonded to one or to several transition-metal (M) atom(s) in coordination and cluster compounds are analyzed in relation to the various types of such structures identified by diffraction methods. These structures are classified in: (a) terminal (linear and bent) nitrosyls, [M(σ-NO)] or [M(NO)]; (b) twofold nitrosyl bridges, [M₂(μ₂-NO)]; (c) threefold nitrosyl bridges, [M₃(μ₃-NO)]; (d) σ/π-dihaptonitrosyls or “side-on” nitrosyls; and (e) isonitrosyls (oxygen-bonded nitrosyls).Typical ranges for the values of internuclear N–O and M–N bond-distances and M–N–O bond-angles for linear nitrosyls are: 1.14–1.20 Å/1.60–1.90 Å/180–160° and for bent nitrosyls are 1.16–1.22 Å/1.80–2.00 Å/140–110°. The [M₂(μ₂-NO)] bridges have been divided into those that contain one or several metal–metal bonds and those without a formal metal/metal bond (M?M). Typical ranges for the M–M, N–O, M–N bond distances and M–N–M bond angles for the normal twofold NO bridges are: 2.30–3.00 Å/1.18–1.22 Å/1.80–2.00 Å/90–70°, whereas for the analogous ranges of the long twofold NO bridges these are 3.10–3.40 Å/1.20–1.24 Å/1.90–2.10 Å/130–110°. In both situations the N–O vector is approximately at right angle to the M–M (or M?M) vector within the experimental error; i.e. the NO group is symmetrical bonded to the two metal atoms. In contrast the threefold NO bridges can be symmetrically or unsymmetrically bonded to an M₃-plane of a cluster compound. Characteristic values for the N–O and M–N bond-distances of these NO bridges are: 1.24–1.28 Å/1.80–1.90 Å, respectively. As few dihaptonitrosyl and isonitrosyl complexes are known, the structural features of these are discussed on an individual basis.The very extensive vibrational spectroscopy literature considered gives emphasis to the data from linearly bonded NO ligands in stable closed-shell metal complexes; i.e. those which are consistent with the “effective atomic number (EAN)” or “18-electron” rule. In the paucity of enough vibrational spectroscopic data from complexes with only nitrosyl ligands, it turned out to be very advantageous to use wavenumbers from the spectra of uncharged and saturated nitrosyl/carbonyl metal complexes as references, because the presence of a carbonyl ligand was found to be neutral in its effect on the ν(NO)-values. The wide wavenumber range found for the ν(NO) values of linear MNO complexes are then presented in terms of the estimated effects of net ionic charges, or of electron-withdrawing or electron-donating ligands bonded to the same metal atom. Using this approach we have found that: (a) the effect for a unit positive charge is [plus 100 cm^?1] whereas for a unit negative charge it is [minus 145 cm^?1]. (b) For electron-withdrawing co-ligands the estimated effects are: terminal CN [plus 50 cm^?1]; terminal halogens [plus 30 cm^?1]; bridging or quasi-bridging halogens [plus 15 cm^?1]. (c) For electro donating co-ligands they are: PF₃ [plus 10 cm^?1]; P(OPh)₃ [?30 cm^?1]; P(OR)₃ (R = alkyl group) [?40 cm^?1]; PPh₃ [?55 cm^?1]; PR₃ (R = alkyl group) [?70 cm^?1]; and η⁵-C₅H₅ [?60 cm^?1]; η⁵-C₅H₄Me [?70 cm^?1]; η⁵-C₅Me₅ [?80 cm^?1]. These values were mostly derived from the spectra of nitrosyl complexes that have been corrected for the presence of only a single electronically-active co-ligand. After making allowance for ionic charges or strongly-perturbing ligands on the same metal atom, the adjusted ‘neutral-co-ligand’ ν(NO)*-values (in cm^?1) are for linear nitrosyl complexes with transition metals of Period 4 of the Periodic Table, i.e. those with atomic orbitals (…4s3d4p): [ca. 1750, Cr(NO)]; [1775,Mn(NO)]; [1796,Fe(NO)]; [1817,Co(NO)]; [ca. 1840, Ni(NO)]. Period 5 (…5s4d5p): [1730 Mo(NO)]; [—, Tc(NO)]; [1745,Ru(NO)]; [1790,Rh(NO)]; [ca. 1845, Pd(NO)]. Period 6 (…6s4f5d6p), [1720,W(NO)]; [1730,Re(NO)]; [1738,Os(NO)]; [1760,Ir(NO)]; [—, Pt] respectively. Environmental differences to these values, e.g. data taken in polar solutions or in the crystalline state, can cause ν(NO)* variations (mostly reductions) of up to ca. 30 cm^?1.Three spectroscopic criteria are used to distinguish between linear and bent NO groups. These are: (i) the values of ν(¹⁴NO) themselves, and (ii) the isotopic band shift – (IBS) – parameter which is defined as [ν(¹⁴NO)–ν(¹⁵NO)], and, (iii) the isotopic band ratio – (IBR) – given by [ν(¹⁵NO/ν¹⁴NO)]. The former is illustrated with the ν(¹⁴NO)-data from trigonal bipyramidal (TBP) and tetragonal pyramidal (TP) structures of [M(NO(L)₄] complexes (where M = Fe, Co, Ru, Rh, Os, Ir and L = ligand). These values indicate that linear (180–170°) and strongly bent (130–120°) NO groups in these compounds absorb over the 1862–1690 cm^?1 and 1720–1525 cm^?1-regions, respectively. As was explicitly demonstrated for the linear nitrosyls, these extensive regions reflect the presence in different complexes of a very wide range of co-ligands or ionic charges associated with the metal atom of the nitrosyl group. A plot of the IBS parameter against M–N–O bond-angle for compounds with general formulae [M(NO)(L)_y] (y = 4, 5, 6) reveals that the IBS-values are clustered between 45 and 30 cm^?1 or between 37 and 25 cm^?1 for linear or bent NO groups, respectively. A plot of IBR shows a less well defined pattern. Overall it is suggested that bent nitrosyls absorb ca. 60–100 cm^?1 below, and have smaller co-ligand band-shifts, than their linear counterparts.Spectroscopic ν(NO) data of the bridging or other types of NO ligands are comparatively few and therefore it has not been possible to give other than general ranges for ‘neutral co-ligand’ values. Moreover the bridging species data often depend on corrections for the effects of electronically-active co-ligands such as cyclopentadienyl-like groups. The derived neutral co-ligand estimates, ν(NO)*, are: (a) twofold bridged nitrosyls with a metal–metal bond order of one, or greater than one, absorb at ca. 1610–1490 cm^?1; (b) twofold bridged nitrosyl ligands with a longer non-bonding M?M distance, ca. 1520–1490 cm^?1; (c) threefold bridged nitrosyls, ca. 1470–1410 cm^?1; (d) σ/π dihaptonitrosyl, [M(η²-NO)], where M = Cr, Mn and Ni; ca. 1490–1440 cm^?1. Isonitrosyls, from few examples, appear to absorb below ca. 1100 cm^?1.To be published DFT calculations of the infrared and Raman spectra of complexes with formulae [M(NO)_4?n(CO)_n] (M = Cr, Mn, Fe, Co, Ni, and n = 0, 1, 2, 3, 4, respectively) are used as models for the assignments of the ν(MN) and δ(MNO) bands from more complex metal nitrosyls.     

Synthesis and characterization of a tetranuclear copper(Ⅱ) complex with a chiral Schiff base ligand

The title complex l-[Cu^Ⅱ₄（Hvap）₂（vap）₂（MeOH）₂]（CIO₄）₂ 1 has been synthesized and characterized by EA. IR,TGA,solid-state CD spectra and X-ray single-crystal analyses（l-H₂vap’.a Schiff base ligand derived from the condensation of o-vanillin and l-2-amino-3-phenyl-l-propanol）.Complex 1 crystallizes in monoclinic system,chiral space group P2₁ with a =10.4257（18）.b = 21.695（4）,c = 15.721（3）A,β= 94.443（3）.V= 3545.1（11） ³,Z=2,Cu₄C₇₀H₇₈N₄O₂₂Cl₂.Mr= 1652.42,D_c= 1.548 g/cm³, F（000）= 1704 andμ（MoKα） = 1.338 mm^-1.The final R = 0.0682 and wR = 0.1420 for 6170 observed reflections with I > 2σ（I） and R = 0.1775 and wR = 0.1830 for all data.The structure of complex 1 contains a boat-shaped(Cu₄O₄} motif.The solid-state CD spectra confirm the chiral nature of complex 1.     

Amperometric sensor for hydrogen peroxide based on direct electron transfer of spinach ferredoxin on Au electrode

A protein-based electrochemical sensor for hydrogen peroxide (H₂O₂) was developed by an easy and effective film fabrication method where spinach ferredoxin (Fdx) containing [2Fe–2S] metal center was cross linked with 11-mercaptoundecanoic acid (MUA) on a gold (Au) surface. The surface morphology of Fdx molecules on Au electrodes was investigated by atomic force microscopy (AFM). Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed to study the electrochemical behavior of adsorbed Fdx on Au. The interfacial properties of the modified electrode were evaluated in the presence of Fe(CN)₆^3?/4? redox couple as a probe. From CV, a pair of well-defined and quasi-reversible redox peaks of Fdx was obtained in 10 mM, pH 7.0 Tris–HCl buffer solution at ?170 and ?120 mV respectively. One electron reduction of the [2Fe-2S]²⁺ cluster occurs at one of the iron atoms to give the reduced [2Fe-2S]⁺. The formal reduction potential of Fdx ca. ?150 mV (vs. Ag/AgCl electrode) at pH 7.0. The electron-transfer rate constant, k_s, for electron transfer between the Au electrode and Fdx was estimated to be 0.12 s^?1. From the electrochemical experiments, it is observed that Fdx/MUA/Au promoted direct electron transfer between Fdx and electrode and it catalyzes the reduction of H₂O₂. The Fdx/MUA/Au electrode displays a linear increase in amperometric current for increasing concentration of H₂O₂.The sensor calibration plot was linear with r² = 0.998 with sensitivity approximately 68.24 μAm M^?1 cm^?2. Further, the effect of nitrite on the developed sensor was examined which does not interfere with the detection of H₂O₂. Finally, the addition of H₂O₂ on MUA/Au electrode was observed which has no effect on amperometric current.     

Adsorption of CO2 and CH4 on a magnesium-based metal organic framework

A magnesium-based metal organic framework (MOF), also known as Mg-MOF-74, was successfully synthesized, characterized, and evaluated for adsorption equilibria and kinetics of CO₂ and CH₄. The Mg-MOF-74 crystals were characterized with scanning electron microscopy for crystal structure, powder X-ray diffraction for phase structure, and nitrogen adsorption for pore textural properties. Adsorption equilibrium and kinetics of CO₂ and CH₄ on the Mg-MOF-74 adsorbent were measured in a volumetric adsorption unit at 278, 298, and 318 K and pressures up to 1 bar. It was found that the Mg-MOF-74 adsorbent prepared in this work has a median pore width of 10.2 Å, a BET specific surface area of 1174 m²/g, CO₂ and CH₄ adsorption capacities of 8.61 mmol g^?1 (37.8 wt.%) and 1.05 mmol g^?1 (1.7 wt.%), respectively, at 298 K and 1 bar. Both CO₂ and CH₄ adsorption capacities are significantly higher than those of zeolite 13X under similar conditions. The pressure-dependent equilibrium selectivity of CO₂ over CH₄ (q_CO2/q_CH4) in the Mg-MOF-74 adsorbent showed a trend similar to that of zeolite 13X and the intrinsic selectivity of Mg-MOF-74 at zero adsorption loading is 283 at 298 K. The initial heats of adsorption of CO₂ and CH₄ on the Mg-MOF-74 adsorbent were found to be 73.0 and 18.5 kJ mol^?1, respectively. The adsorption kinetic measurements suggest that the diffusivities of CO₂ and CH₄ on Mg-MOF-74 were comparable to those on zeolite 13X. CH₄ showed relatively faster adsorption kinetics than CO₂ in both adsorbents. The diffusion time constants of CO₂ and CH₄ in the Mg-MOF-74 adsorbent at 298 K were estimated to be 8.11 × 10^?3 and 4.05 × 10^?2 s^?1, respectively, showing a modest kinetic selectivity of about 5 for the separation CH₄ from CO₂.