不同氛围下烟草的热裂解行为研究

烟丝分别在He和空气环境中于600、700、800、900、1 000 ℃下进行热裂解,裂解产物用GC-MS进行在线检测,研究了烟丝样品分别在惰性和有氧氛围中不同温度下的热裂解行为.数据表明,烟丝在He气和空气中热裂解时的产物有较大差异,He气下的裂解产物以烯烃、苯和苯系物为主;在空气下裂解的主要产物为酮、醛、醇、酸和酯等羰基化合物.有氧氛围有益于异戊二烯和1,3-丁二烯的生成,但在一定程度上抑制了酚类物质的产生.在惰性和有氧氛围下,随着温度的升高,多环芳烃化合物的产生量均进一步增加.He氛围下得到的裂解产物类型接近卷烟燃烧时的热解区,而空气氛围下得到的裂解产物类型接近燃烧区.     

TGA和Py-GC/MS研究不同氛围下烟草的热失重和热裂解行为

应用热重红外联用技术(TG-FTIR)和热裂解气相色谱-质谱联用技术(Py-GC/MS)对卷烟烟丝的热失重和热裂解行为及其裂解产物进行研究.采用热重分析法测定不同气氛下卷烟样品的热失重(TG)、微商热重(DTG)曲线,以及热裂解过程中H2O、CO2、CO、NH3和CH4等气体物质的释放量.结果表明,裂解气氛不同可以显著...     

基于TGA-FTIR联用技术研究ABS树脂的热氧降解行为

采用热失重-傅立叶变换红外光谱(TGA-FTIR)联用技术研究了空气气氛下ABS树脂的热稳定性及热氧降解失重情况。研究了ABS在4个不同升温速率下的失重情况;采用TGA-FTIR联用技术对10℃/min等速升温下ABS失重过程的逸出气体进行分析;采用热分解动力学方法分析ABS的热氧降解过程,计算热分解活化能。结果表明,ABS的TGA曲线有两个失重区间:第一区间是ABS的急剧氧化降解过程,活化能(Ea)为191.8~262.8 kJ.mol-1,第二区间是成炭产物的氧化,Ea约为139.7 kJ.mol-1;升温速率越小,ABS热氧降解速率越慢,交联成炭产物越多,有利于抑制ABS的降解;由FTIR测试和Ea变化发现,热氧降解反应为多步复杂反应,初期时氧化反应和氧化断链同时进行,并以氧化断链反应为主,随着分子链上产生的双键增多发生交联反应,失重率大于80%时开始炭化反应,最终交联炭层发生氧化反应生成CO2。     

热重-傅立叶变换红外光谱联用法研究超支化聚氨酯/丙烯酸酯的热性能及热分解机理

采用热重分析仪(TG)和差示扫描量热仪(DSC)对自制的超支化聚氨酯(HPU)和UV固化超支化聚氨酯丙烯酸酯(HPUA)在不同气氛下的热失重行为和玻璃化转变温度(Tg)进行分析,在此基础上,结合热重红外联用仪(TG-FTIR)探究了HPU和HPUA的热分解机理。热重分析结果表明:HPU和HPUA在氮气气氛下具有相似的热分解行为,均有3段热分解温度;在空气气氛下的热分解与氮气气氛下的热分解相比,其分解行为相似,但前者的分解更迅速。DSC分析表明:接入丙烯酸羟乙酯(HEA)后,HPUA的Tg明显低于HPU。热红联用对热分解机理的分析表明:空气气氛下的分解比氮气气氛下更迅速,降解更完全。HPU的3段热分解分别为:醇的降解、氨基甲酸酯键的降解、脲基键的降解;HPUA的3段热分解分别为:丙烯酸羟乙酯的降解、氨基甲酸酯键的降解、脲基键的降解。     

乙苯与二甲苯在超临界压力下的热裂解研究

采用连续流动装置, 在压力为4 MPa, 温度分别在700, 750和780 ℃条件下, 开展了乙苯和二甲苯在超临界压力条件下热裂解反应的实验研究. 对乙苯和二甲苯裂解的气相产物, 采用在线气相色谱进行分析; 而裂解的液相产物则通过色质联用仪进行定量分析. 研究发现乙苯和二甲苯裂解的气相产物组成基本相同, 而液相产物组成相差较大, 但都是芳香烃类化合物. 乙苯和二甲苯的转化率都随温度升高而增加; 在相同温度下, 乙苯比二甲苯转化率高. 此外, 裂解过程并未发现明显的结焦现象, 说明纯芳香烃物质的热裂解并不会导致严重积炭. 同时, 本文还采用密度泛函方法在BHandHLYP/6-31+G(d, p)水平上, 对乙苯和甲苯分别进行结构优化并计算相关的键能. 计算结果表明: 乙苯侧链乙基中的C—C键的键能最小, 从而说明乙苯侧链烷基更容易发生断键反应, 理论结果很好地解释了乙苯比二甲苯裂解转化率高的实验现象. 本文的工作对燃料裂解结焦机理的重新认识有重要的意义.     

热分析-傅里叶变换红外光谱-气相色谱-质谱联用测定葡萄糖的热分解产物

应用热分析-傅里叶变换红外光谱-气相色谱-质谱联用测定葡萄糖的热分解产物。葡萄糖样品在同步热分析条件下,分别在氮气和氮氧混合气氛围中进行热解,同时进行红外扫描,根据样品的热重曲线和红外谱图进行判定和选择GC-MS温度点,裂解产物进入GC-MS进行分离和鉴定。结果表明:葡萄糖在220℃,300℃,350℃和470℃下的热分解产物中共检出44种化合物;葡萄糖在高温下的热裂解产物中共检出76种化合物。分析结果对葡萄糖在不同温度下的应用有较好的理论指导。     

在线热裂解/气相色谱-质谱分析3-吡啶甲酸茴香酯的热裂解产物

采用在线热裂解/气相色谱-质谱(Py/GC-MS)联用技术对3-吡啶甲酸茴香酯进行热裂解分析。通过酰氯化和酯化反应合成了新型目标化合物3-吡啶甲酸茴香酯,其分子式为C14H14NO3。目标化合物的结构经核磁氢谱(1H NMR)、核磁碳谱(13C NMR)、红外光谱(IR)和高分辨质谱(HRMS)进行确证,并通过热重-微热重-差示扫描量热(TG-DTG-DSC)分析方法对目标化合物的热稳定性进行分析。在空气氛围中,将目标化合物分别于300,600,900℃下进行热裂解,并通过气相色谱-质谱法对其挥发性热裂解产物进行定性和半定量分析。研究显示:目标化合物共经历了两次失重过程。第一次失重在129.9~158.9℃之间,失重2.3%;第二次失重在158.9~274.9℃之间,失重达90.1%,230.1℃时失重率最大。热裂解共产生44种产物,包括具有香味特征的大茴香醛、对甲基苯酚、松油醇、D-香茅醇、大茴香醚和茴香醚等化合物。其中裂解温度对裂解产物的种类和相对含量具有明显影响。300℃时α-二去氢菖蒲烯的相对含量最高,600,900℃时,相对含量最高的分别是大茴香醛和对甲基苯酚。苯甲醛、茴香醚和大茴香醚的相对含量随着温度的升高呈先增加后降低趋势;而对甲基苯酚含量则随着温度的升高而增加。根据主要裂解产物及其相对含量的变化,对目标化合物的裂解机理进行了初步探讨。     

不同氛围下绿原酸的热解行为及其裂解产物中苯酚含量分布规律研究

采用热重分析法(TGA)及在线裂解气相色谱-质谱联用仪(Py/GC - MS)研究了烟草中绿原酸在不同氛围下的热解行为及其含量分布规律.先用TGA确定了绿原酸在氮气氛围中的主要热失重区间,选取4个典型的温度点,再结合卷烟在高温燃烧区的3个温度点,分别在惰性(氦气)和有氧(含9％氧气的氮氧混合气)氛围中进行热裂解实验,对...     

烟草中β-胡萝卜素的热裂解产物的研究

为了研究烟草中β-胡萝卜素的高温裂解产物对卷烟抽吸品质的影响,利用热裂解气相色谱/质谱联用仪在不同裂解氛围(空气、氮气中含10%O2及N2)和不同温度(300,600和900 ℃)下对β-胡萝卜素进行裂解,裂解产物用固相微萃取装置进行吸附,然后将吸附到的裂解产物用气相色谱/质谱联用仪(GC/MS)进行分析。结果表明,β-胡萝卜素在不同裂解条件下主要的裂解产物是甲苯、对二甲苯、1,2,3,4-四氢-1,1,6-三甲基萘和2,7-二甲基萘等化合物,另外还生成异佛尔酮、β-环柠檬醛、β-紫罗兰酮、二氢猕猴桃内酯等香味化合物,这些物质随裂解温度和裂解氛围的不同其含量有所差异。     

多孔酚醛树脂热解碳材料的制备与结构

用苯酚和甲醛在氨水催化下合成了可溶性酚醛树脂, 经掺杂不同质量比发泡剂(氯化锌)后在惰性气氛下进行热裂解(500～900 ℃), 制备了多孔热解碳导电材料(PPAS); 用FTIR, XRD, TG, SEM, BET等方法对所制备材料进行了结构表征, 详细讨论了发泡剂的加入对热解碳导电材料结构和性能的影响. 研究发现: 酚醛树脂经掺杂一定量发泡剂后再进行热裂解, 一方面加快了酚醛树脂分子间的脱水速度, 降低了热裂解温度范围; 另一方面, 裂解产物内部结构的微晶尺寸和层间距发生了明显变化, 未掺杂发泡剂的裂解产物呈现尖锐棱角的无定形结构, 而掺杂发泡剂的裂解产物则为多孔的球形和椭球形结构; 表面吸附实验测试结果表明, 当酚醛树脂与发泡剂的质量比为1∶3, 升温速率为30 ℃/h, 热裂解温度为600 ℃时, 热裂解产物的比表面积可达2150 m2•g－1, 平均孔径在11 Å左右.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.