Synthesis of La<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript> by thermal treatment of mechanically activated salt mixture

A lanthanum zirconate La₂Zr₂O₇ was synthesized by soft mechanochemical method using zirconium oxynitrate ZrO(NO₃)₂·6H₂O and lanthanum carbonate La₂(CO₃)₃·8H₂O as reagents. Mechanical activation of the reagents was carried out in a centrifugal planetary ball mill. The processes occurring during calcination of the jointly and the separately mechanically activated salt mixture were studied using DSC, TG coupled with mass spectrometry, XRD analysis, and FTIR spectroscopy. It was shown that in the course of joint mechanical activation in the mill alongside with intimate mixing of the reagents and their amorphization exchange reaction occurred, producing lanthanum nitrate, basic lanthanum nitrate, basic zirconium carbonate, and hydrated zirconium oxide. The DSC curve of the jointly mechanically activated salt mixture showed a strong exothermic peak at 878 °C which was not associated with mass loss. This peak was attributed to La₂Zr₂O₇ crystallization in agreement with XRD data. Nanocrystalline lanthanum zirconate synthesized by annealing of the jointly mechanically activated salt mixture was characterized using XRD analysis, scanning, and transmission electron microscopy.     

Electrodeposition of PbO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> composite materials

The regularities of electrodeposition of composite materials based on PbO₂ containing zirconium dioxide particles are studied. The contents of various phases in the composite depend on the electrolyte composition and conditions of deposition. When a dispersed phase is incorporated into the composite coating, the dimensions of lead dioxide crystals decrease to submicrons.     

ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> binary oxides as promising supports for palladium catalysts of hydrodechlorination

Deposited palladium catalysts of the hydrodechlorination of 1,3,5-trichlorobenzene were studied. Pure zirconium and aluminum oxides and ZrO₂-Al₂O₃ mixtures with 1, 5, and 10 mol % Al₂O₃ prepared by coprecipitation were used as supports. Palladium was deposited by the precipitation of its hydroxide on supports. Catalysts on binary supports (ZrO₂ + 1% Al₂O₃ and ZrO₂ + 5% Al₂O₃) exhibited higher activity and stability in hydrodechlorination compared with catalysts on pure supports. The suggestion was made that the high activity and stability of these systems in hydrodechlorination was related to the formation of binary oxide in the interaction of ZrO₂ with palladium oxide at the stage of annealing of the catalyst precursor. Binary oxide, which was a center of the activation of the C-Cl bond, was simultaneously a source of active hydrogen. The presence of various palladium states in catalysts was substantiated by the temperature programmed reduction method.     

Physicochemical processes involved in synthesis of thin films based on double oxides of the ZrO<Subscript>2</Subscript>-GeO<Subscript>2</Subscript> system

The major physicochemical processes underlying the preparation of thin films of the ZrO-GeO₂ system from film-forming solutions based on zirconium oxochloride (ZrOCl₂ · 8H₂O), germanium tetrachloride (GeCl₄), and ethanol were studied. The phase composition, structure, and physicochemical properties of the films were determined.     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.     

Effect of the Composition of Modified SO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack>/ZrO<Subscript>2</Subscript> on Catalytic Properties in Reduction of NO by Hydrocarbons

We have shown that the activity of cobalt-containing catalysts based on sulfated zirconium dioxide in selective catalytic reduction (SCR) of NO by methane depends on the amount of sulfur and the preparation method. Modification of Fe and Mn improves the catalytic behavior of SO ₄ ²⁻ /ZrO₂ as a result of the increase in the concentration of active sites.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 121–125, March– April, 2005.     

Study of <Emphasis Type="Italic">n</Emphasis>-hexane isomerization on Pt/SO<Subscript>4</Subscript>/ZrO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts: Effect of the state of platinum on catalytic and adsorption properties

The state of surface Pt atoms in the Pt/SO₄/ZrO₂/Al₂O₃ catalyst and the effect of the state of platinum on its adsorption and catalytic properties in the reaction of n-hexane isomerization were studied. The Pt-X/Al₂O₃ alumina-platinum catalysts modified with various halogens (X = Br, Cl, and F) and their mechanical mixtures with the SO₄/ZrO₂/Al₂O₃ superacid catalyst were used in this study. With the use of IR spectroscopy (CO_ads), oxygen chemisorption, and oxygen-hydrogen titration, it was found that ionic platinum species were present on the reduced form of the catalysts. These species can adsorb to three hydrogen atoms per each surface platinum atom. The specific properties of ionic platinum manifested themselves in the formation of a hydride form of adsorbed hydrogen. It is believed that the catalytic activity and operational stability of the superacid system based on sulfated zirconium dioxide were due to the participation of ionic and metallic platinum in the activation of hydrogen for the reaction of n-hexane isomerization.     

Specific heat on Sr<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and Sr<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Specific heats on the single crystals of Sr₂Nb₂O₇, Sr₂Ta₂O₇ and (Sr_1-xBa_x)₂Nb₂O₇ were measured in a wide temperature range of 2-600 K. Heat anomalies of a λ-type were observed at the incommensurate phase transition of T_INC (=495 K) on Sr₂Nb₂O₇ and at the super-lattice phase transition of T_SL (=443 K) on Sr₂Ta₂O₇; the transition enthalpies and the transition entropies were estimated. Furthermore, a small heat anomaly was observed at the low temperature ferroelectric phase transition of T_LOW (=95 K) on Sr₂Nb₂O₇. The transition temperature T_LOW decreases with increasing Ba content x and it vanishes for samples of x>2%.     

Synthesis and speciation of zirconium tetrafluoride complexes with phosphoryl-containing bases Ph<Subscript>3</Subscript>PO,Bu<Subscript>3</Subscript>PO and (Me<Subscript>2</Subscript>N)<Subscript>3</Subscript>PO in solutions

Zirconium fluoro complexes with phosphoryl-containing bases (L) have been synthesized by the reaction of a suspension of ZrF₄(dmso)₂ in toluene with an excess of Ph₃PO or Bu₃PO, as well as (Me₂N)₃PO in CH₂Cl₂. The composition and structure of the complexes in CH₂Cl₂ solutions have been studied by ¹⁹F NMR in the temperature range 293–203 K. Phosphine oxides are substituted for dmso to form mainly cis-tetrafluoro species, insignificant amounts of trans-tetrafluoro species, and mer- and fac-[ZrF₃L₃]⁺ complexes. In addition to these species, the reaction with Bu3PO yields the dimeric oxo complex (µ-O)[ZrF₃(Bu₃PO)₂]₂. Hydrolysis of fluoro complexes in CH₂Cl₂ with the use of an NBu₄OH solution in iso-PrOH does not lead to oxo and hydroxo complexes: first, the [ZrF₅L]^– complex is formed, and the final hydrolysis product is ZrF₆^2-. The fine structure of ¹⁹F NMR resonance lines for the zirconium fluoride compounds [ZrF5L]^–, cis- [ZrF₄L₂], dimeric oxo complex, and mer-[ZrF₃L₃]⁺ in organic solvents has been observed for the first time, which makes it possible to reliably identify the composition and structure of the zirconium coordination polyhedron in the complexes under consideration.     

Effect of the alkoxides addition order on the properties of Pd/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZrO<Subscript>2</Subscript> catalysts used for methane combustion

A series of Pd/Al₂O₃–ZrO₂ catalysts were prepared to be used in methane oxidation. The effect of the addition order of metal alkoxides on the texture, structure and catalytic properties of the solids is studied. The control of the preparation parameters is achieved via sol gel way as an attractive route of the preparation of these catalysts. N₂ physisorption, XRD, Scanning Electronic Microscopy (SEM) and H₂ chemisorption are the main techniques used to characterize the prepared Pd/Al₂O₃–ZrO₂ catalysts. Textural analysis reveals the mesoporosity of all the catalysts independently of the addition order of alkoxides while surface area is more pronounced when the aluminium alkoxide is added before or with the zirconium precursor. XRD patterns show the development of the zirconia tetragonal phase for all the catalysts. Better metallic dispersion is obtained when aluminium alkoxide is added first which can be justified by the high homogeneity observed on the corresponding catalyst as revealed by SEM technique.     

Synthesis and structure of [UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>){CONH<Subscript>2</Subscript>N(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>}<Subscript>2</Subscript>]

The single crystals of [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] were synthesized and studied by X-ray diffraction. The crystals are monoclinic, a = 7.461(2) Å, b = 8.828(2) Å, c = 11.756(2) Å, β = 107.21(3)°, space group Pc, Z = 2, R = 2.94%. The structure comprises infinite chains [UO₂(C₂O₄){CONH₂N(CH₃)₂}₂] extended along [001] and corresponding to the AT¹¹M ₂ ¹ crystallochemical group (A = UO ₂ ²⁺ , T¹¹ = C₂O ₄ ^2? , M¹ = N,N-CONH₂N(CH₃)₂) of uranyl complexes. The chains are connected into a three-dimensional framework by hydrogen bonds involving the oxygen atoms of oxalate and uranyl ions and the N,N-dimethylcarbamide methyl groups.     

Glass formation in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> and SrO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

A physicochemical study of glasses based on the MO-Bi₂O₃-B₂O₃ and SrO-Bi₂O₃-B₂O₃ systems was performed. Glass formation regions were found. The structural and optical properties, as well as the thermal behavior of the glasses, were studied.     

High-temperature heat capacity of stannates Er<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> and Tm<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Erbium stannate Er₂Sn₂O₇ and thulium stannate Tm₂Sn₂O₇ with a pyrochlore-type structure were produced by solid-phase synthesis by calcining stoichiometric mixtures of the respective oxides in air at 1473 K for 240 and 200 h. The high-temperature heat capacity of Er2Sn2O7 and Tm₂Sn₂O₇ was studied by differential thermal calorimetry at 353–1000 K. From the experimental dependences C _P = f(T), the thermodynamic functions (enthalpy change, entropy change, and reduced Gibbs free energy) of oxide compounds were calculated.     

Phase equilibria in the La<Subscript>2</Subscript>S<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>S<Subscript>3</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript> ternary system

Phase equilibria in the La₂S₃-Bi₂S₃-La₂O₃ ternary system were studied by differential thermal, X-ray powder diffraction, and microstructure analyses. Phase diagrams of five vertical sections and a liquidus surface projection were plotted for the La₂S₃-Bi₂S₃-La₂O₃ system. The regions of primary crystallization of phases and coordinates of non- and monovariant equilibria were determined for the system.     

Mechanism and kinetics of formation of La<Subscript>2</Subscript>SrFe<Subscript>2</Subscript>O<Subscript>7</Subscript> and Nb<Subscript>2</Subscript>SrFe<Subscript>2</Subscript>O<Subscript>7</Subscript>

Phase formation processes in the systems Ln₂O₃-SrO-Fe₂O₃ (Ln = La, Nd) in air in the temperature range 1200–1500°C were studied. The synthesis of the complex ferrites La₂SrFe₂O₇ and Nb₂SrFe₂O₇ involves the formation of the intermediate compounds LnFeO₃ and LnSrFeO₄ and occurs by the same mechanism as the synthesis of the corresponding aluminates, but much faster.     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

Phase relations in the Y₂O₃-Ga₂O₃ system were studied by the anneal-and-quench technique in air within 1000–2300°C, and a phase diagram was plotted. Three compounds were found to form: Y₃GaO₆, Y₄Ga₂O₉, and Y₃Ga₅O₁₂; the temperature and concentration bounds of stability were determined for these compounds. Indexing results for Y₃GaO₆ are given.     

Synthesis,structure and thermal decomposition of [Ni(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>][VO(O<Subscript>2</Subscript>)<Subscript>2</Subscript>(NH<Subscript>3</Subscript>)]<Subscript>2</Subscript>

The compound [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ was prepared and characterized by elemental analysis and vibrational spectra. The single crystal X-ray study revealed that the structure consists of [Ni(NH₃)₆]²⁺ and [VO(O₂)₂(NH₃)]⁻ ions. As a result of weak interionic interactions V′···O_p (O_p-peroxo oxygen), ([VO(O₂)₂(NH₃)]⁻)₂ dimers are formed in the solid-state. The thermal decomposition of [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ is a multi-step process with overlapped individual steps; no defined intermediates were obtained. The final solid products of thermal decomposition up to 600°C were Ni₂V₂O₇ and V₂O₅.     

Synthesis and study of sodium triuranate Na<Subscript>2</Subscript>(UO<Subscript>2</Subscript>)<Subscript>3</Subscript>O<Subscript>3</Subscript>(OH)<Subscript>2</Subscript>

Sodium triuranate Na₂(UO₂)₃O₃(OH)₂ was synthesized by the reaction between aqueous uranyl acetate solution and aqueous sodium nitrate solution under hydrothermal conditions at 200°C. The composition and structure of the synthesized compound were determined, and its dehydration and thermal decomposition were studied, by chemical analysis, X-ray diffraction, IR spectroscopy, and thermal analysis.     

Interactions in the system Mn(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-HCONH<Subscript>2</Subscript>-H<Subscript>2</Subscript>O

Solubilities and solid phases in the system Mn(NO₃)₂-HCONH₂-H₂O were studied by an isothermal method at 25°C. The congruently saturating compound Mn(NO₃)₂ · 2HCONH₂ · 2H₂O was isolated; the concentration conditions for its crystallization in the system were determined. The solid phases of the system were characterized by physicochemical methods (X-ray powder diffraction, differential thermal analysis, IR spectroscopy, and crystal-optical analysis).