Poly(lactic-co-glycolic acid) as a particulate emulsifier

The structure and stability of emulsions formed in the presence of nanoparticles of poly(lactic-co-glycolic acid) (PLGA) were characterised. From oil-water contact angles on PLGA films, it was deduced that particle surface hydrophobicity is linked to the oil phase polarity. Incorporation of polyvinyl alcohol molecules into the nanoparticle surfaces reduces the particle hydrophobicity sufficiently for oil-in-water emulsions to be preferentially stabilised. PLGA nanoparticles enhance the stability of emulsions formed from a wide range of oils of different polarities. The nanoparticle concentration was found to be a key parameter controlling the average size and coalescence stability of the emulsion drops. Visualisation of the interfacial structure by electron microscopy indicated that PLGA nanoparticles were located at the drop surfaces, evidence of the capacity of these particles to stabilise Pickering-type emulsions. These results provide insights into the mechanism of PLGA nanoparticle stabilisation of emulsions.     

In Situ Monitoring of Pt Nanoparticle Formation in Ethylene Glycol Solution by SAXS-Influence of the NaOH to Pt Ratio

The temporal evolution of Pt nanoparticle formation in ethylene glycol solution from H(2)PtCl(6)·6H(2)O at 90 °C for different molar ratios of NaOH to Pt (84, 6.5, and 2) in the presence or absence of poly(N-vinyl-2-pyrrolidone) (PVP) as protecting agent was followed in situ by small-angle X-ray scattering (SAXS). The SAXS profiles were analyzed regarding particle size and size distribution using the Guinier approximation and the indirect Fourier transform technique (IFT). The NaOH to Pt ratio has an influence on the integral nanoparticle formation rate as well as on the metal reduction rate and the ratio of nucleation to growth reactions. The fastest nanoparticle formation rate was observed for the NaOH/Pt ratio of 6.5. The obtained results indicate that the differences in the particle formation rate might be due to differences in the reduction rate of the formed Pt complexes. In alkaline reaction media (NaOH/Pt = 84 or 6.5), small nanoparticles with a relatively narrow size distribution were formed. Therefore, it is assumed that for these NaOH/Pt ratios the particle formation is dominated by nucleation reactions. Additionally, the in situ studies point out that nanoparticles prepared at the NaOH/Pt ratio of 84 do not grow further after attaining a certain particle size. For a NaOH to Pt ratio of 2, that means in acidic medium, particle formation should be dominated by growing processes and, therefore, larger particles are formed accompanied by a broader particle size distribution. The influence of PVP on the nanoparticle formation rate is relatively low. However, in acidic medium, the presence of PVP is necessary in order to protect the formed nanoparticles from irreversible aggregation reactions.     

Fabrication of highly porous poly (ɛ-caprolactone) fibers for novel tissue scaffold via water-bath electrospinning

A non-toxic route was used for the preparation of silver nanoparticles using tryptophan (Trp) as reducing/stabilizing agent in the presence of cetyltrimethyl ammonium bromide (CTAB). Role of water soluble neutral polymer poly(vinylpyrrolidone) (PVP) has been studied on the growth of yellow colour silver nanoparticle formation. The synthesized nanostructures were characterized by UV–Visible absorption spectroscopy, transmission electron microscopy (TEM) by observing the size and distribution of silver nanoparticles. As the reaction proceeded, particles grew up to about 10 and 20 nm in the presence and absence of PVP, respectively, as determined by TEM. The formed nanoparticles showed the highest absorption plasmon band at 425 nm. Rate of silver sol formation increases with the [Trp], [CTAB] and [PVP], reaching a limiting value and then decreases with the increase in concentrations of these reagents. It was observed that nanoparticles are spherical, aggregated and poly dispersed in the absence and presence of PVP, respectively. On the basis of kinetic data, a suitable mechanism is proposed and discussed for the silver sol formation.     

Nanoparticle Size and Concentration Dependence of the Electroactive Phase Content and Electrical and Optical Properties of Ag/Poly(vinylidene fluoride) Composites

This paper describes the processing of silver‐nanoparticle‐doped poly(vinylidene fluoride). The effects of the concentration and size of the filler on the electroactive phase of the polymer and the optical and electrical properties are discussed. Spherical silver nanoparticles incorporated into the poly(vinylidene fluoride) polymeric matrix induce nucleation of the electroactive γ phase. The electroactive phase content strongly depends on the content and size of the nanoparticles. In particular, there is a critical nanoparticle size, below which the filler losses its nucleation efficiency due to its small size relative to that of the polymer macromolecules. Furthermore, the presence of surface plasmon resonance absorption in the composites is observed, which once again shows a strong dependence on the concentration and size of the particles. The absorption is larger for higher concentrations, and for a given concentration increases with particle size. This behavior is correlated to the electrical response and is related to the extra bands and electrons provided by the nanoparticles in the large energy band gap of the polymer.     

PARTICLE MORPHOLOGY OF POLY(VINYL CHLORIDE)RESIN PREPARED BY SUSPENDED EMULSION POLYMERIZATION

Suspended emulsion polymerization was used to prepare poly(vinyl chloride) (PVC) resin. Fine PVC particleswere formed at low polymerization conversions. The amount of fine panicles decreases as conversion increases anddisappears at conversions greater than 30%. Scanning electron micrographs show that PVC grains are composed of looselycoalesced primary particles, especially for PVC resins prepared in the presence of poly(vinyl alcohol) dispersant. The size ofprimary particles increases and porosity decreases with the increase of conversion. In view of the particle features of PVCresin, a particle formation mechanism including the formation of primary particles and grains is proposed. The formationprocess of primary particles includes the formation of particle nuclei, coalescence of particle nuclei to form primary particles,and growth of primary particles. PVC grains are formed by the coagulation of primary particles. The loose coalescence ofprimary particles is caused by the colloidal stability of primary particles and the low swelling degree of vinyl chloride in the primary particles.     

Maghemite nanoparticles protectively coated with poly(ethylene imine) and poly(ethylene oxide)-block-poly(glutamic acid)

Superparamagnetic iron oxide particles (SPIO) of maghemite were prepared in aqueous solution and subsequently stabilized with polymers in two layer-by-layer deposition steps. The first layer around the maghemite core is formed by poly(ethylene imine) (PEI), and the second one is formed by poly(ethylene oxide)-block-poly(glutamic acid) (PEO-PGA). The hydrodynamic diameter of the particles increases stepwise from D(h) = 25 nm (parent) via 35 nm (PEI) to 46 nm (PEI plus PEO-PGA) due to stabilization. This is accompanied by a switching of their zeta-potentials from moderately positive (+28 mV) to highly positive (+50 mV) and finally slightly negative (-3 mV). By contrast, the polydispersity indexes of the particles remain constant (ca. 0.15). M?ssbauer spectroscopy revealed that the iron oxide, which forms the core of the particles, is only present as Fe(III) in the form of superparamagnetic maghemite nanocrystals. The magnetic domains and the maghemite crystallites were found to be identical with a size of 12.0 +/- 0.5 nm. The coated maghemite nanoparticles were tested to be stable in water and in physiological salt solution for longer than 6 months. In contrast to novel methods for magnetic nanoparticle production, where organic solvents are necessary, the procedure proposed here can dispense with organic solvents. Magnetic resonance imaging (MRI) experiments on living rats indicate that the nanoparticles are useful as an MRI contrast agent.     

丙烯酸聚乙二醇酯-甲基丙烯酸共聚物对CaCO_3微粒形貌的调控

研究了两种聚合物-丙烯酸聚乙二醇酯（PEGA）和丙烯酸聚乙二醇酯-甲基丙烯 酸共聚物（PEGA-PMAA）对CaCO_3粒子生长的调控。发现PEGA调控下得到CaCO_3片 层状粒子的粒径比在纯水中的小，而PEGA-PMAA调控下的粒子粒径较大，并且长成 了奇特的花状形貌。这说明PEGA在CaCO_3粒子生长过程中起了阻碍作用，而双亲水 的PEGA-PMAA则促进了CaCO_3粒子的生长。     

Interactions between macromolecules and metal nanoparticles in aqueous-saline media

The influence of the concentration of low-molecular-mass salt additives in the reaction medium on the size characteristics of copper nanoparticles in sols formed through the reduction of Cu²⁺ ions in the presence of a cationic polyelectrolyte and nonionogenic polymers with hydrophilic (poly(ethylene oxide) and hydrophobic (poly(N-vinylpyrrolidone)) main chains has been studied. Formation of sols with a narrow size (diameter) distribution of metal nanoparticle indicates the pseudomatrix character of formation of the metal phase under the studied conditions. Effects of the neutral salt and its concentration in the reaction medium on the synthesis of copper sols and on the mean size of metal nanoparticles are related to a change in the nature or character (when oppositely charged polyelectrolyte macromolecules and copper nanoparticles are involved in interaction) of noncovalent interactions stabilizing the macromolecule-nanoparticle complex on passage from the salt-free aqueous medium to the aqueous-saline medium with a sufficiently high concentration of the neutral salt.     

Mixed Co/Fe oxide nanoparticles in block copolymer micelles

Small iron oxide and Co-doped iron oxide nanoparticles (NPs) were synthesized in a commercial amphiphilic block copolymer, poly(ethylene oxide)-b-poly(methacrylic acid) (PEO 68-b-PMAA8), in aqueous solutions. The structure and composition of the micelles containing guest molecules (metal salts) or NPs (metal oxides) were studied using transmission electron microscopy, dynamic light scattering, X-ray photoelectron spectroscopy, and X-ray powder diffraction. The enlarged micelle cores after incorporation of metal salts are believed to be formed by both PMAA blocks containing metal species and penetrating PEO chains. The nanoparticle size distributions in PEO 68-b-PMAA8 were determined using small-angle X-ray scattering (SAXS) in bulk. Two independent methods for SAXS data interpretation for comprehensive analysis of volume distributions of metal oxide NPs showed presence of both small particles and larger entities containing metal species which are ascribed to organization of block copolymer micelles in bulk. The magnetometry measurements revealed that the NPs are superparamagnetic and their characteristics depend on the method of the NP synthesis. The important advantage of the PEO 68-b-PMAA8 stabilized magnetic nanoparticles described in this paper is their remarkable solubility and stability in water and buffers.     

Poly(ethylene oxide) macromonomer-grafted polymer nanoparticles synthesised by emulsifier-free emulsion polymerisation

Ultrafine polymer nanoparticles based on poly(ethylene oxide) (PEO) macromonomer-grafted polystyrene (PS) have been synthesised by emulsifier-free emulsion polymerisation. In addition to the binary copolymerisation between PEO macromonomer and styrene, ternary copolymerisations were also conducted in the presence of a cationic monomer (2-(methacryloyloxy)ethyl) trimethylammonium chloride (MATMAC) as a second comonomer. The size and charge characteristics of fine nanoparticles were characterised using both photon correlation spectroscopy and transmission electron microscopy techniques as well as colloidal titration. It was found that after PEO chains (repeat unit 9 or higher) were incorporated into the PS latex, the particle size was significantly reduced owing to the steric effect contributed from grafted PEO chains. Ternary copolymerisation using MATMAC as comonomer further reduced the particle size, leading to nanoparticles as small as 60 nm. Increasing the MATMAC feed ratio gradually reduced the final size of the nanoparticle, owing to the enhancement in electrostatic stabilisation, whereas increasing the PEO macromonomer feed ratios led to slightly larger particles but significantly inhibited the agglomeration of primary particles. The formation mechanism of the nano- or microparticles with various sizes during polymerisation is discussed in terms of nucleation, agglomeration and adsorption of primary particles.     

Morphology of core-shell latex particles

The progressive dissolution of carboxylated latex particles with increasing pH was utilized to investigate the internal structure of core-shell latex particles, in comparison with that of copolymeric latex particles formed from the same monomers. The results indicated that in those latex particles which are formed when ethyl acrylate (EA) -methacrylic acid (MAA) or methyl acrylate (MA) -MAA mixture is polymerized in the presence of poly(MA-MAA) or poly(EA-MAA) seeds the shell is composed of the more hydrophilic poly(MA-MAA) molecules relatively high in MAA content and the core is composed of both poly(MA-MAA) and poly(EA-MAA) molecules, regardless of the order of the stage feed, while the copolymeric latex particles are relatively uniform from surface to center in distribution of all components except MAA. Examination of the distribution of the carboxylic groups in all of the latex particles showed their concentration to be highest at the surface and to decrease with proximity to the center in accordance with other findings reported in the literature.     

Pseudotemplate synthesis of copper nanoparticles in solutions of poly(acrylic acid)-pluronic blends

It was found that the reduction of copper(II) ions in solutions of poly(acrylic acid)-pluronic blends results in a stable sol of metallic copper with a particle size below 10 nm, whereas a less stable sol with coarse aggregates of particles is formed in the presence of poly(acrylic acid) alone and an insoluble complex of this polymer with copper nanoparticles is produced in the presence of pluronic alone. The addition of poly(acrylic acid) to the complex causes the transfer of a portion of nanoparticles from the precipitate into the sol. In mixed poly(acrylic acid) and pluronic solutions, no formation of a polymeric complex with reasonable stability was detected. It was assumed that such a polycomplex is stabilized in the presence of copper nanoparticles. Owing to its amphiphilic nature, the complex forms stable protective shields on the surface of nanoparticles, and the stability of the sol is determined by free fragments of poly(acrylic acid).     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Environmentally sensitive silver nanoparticles of controlled size synthesized with PNIPAM as a nucleating and capping agent

Metal nanoparticles combined with environmentally sensitive polymers can lead to enhanced nanometer-sized switches. We present a silver nanoparticle synthesis method that uses poly(N-isopropylacrylamide) (PNIPAM) as the nucleating, capping, and stabilizing agent. The synthesis is performed at room temperature by sodium borohydride-mediated reduction of silver nitrate in the presence of a fully hydrated polymer. The resulting metal nanoparticles have a narrow size distribution comparable to or better than those achieved with other synthesis methods. The silver particles can be thermally precipitated by the collapse of the PNIPAM shell and resolubilized with fast response times, as shown by surface plasmon spectroscopy. The silver-PNIPAM composite allows for combined surface plasmon and thermal switching applications.     

Hexagonal-to-cubic phase transformation in composite thin films induced by FePt nanoparticles located at PS/PEO interfaces

The organization process of asymmetric poly(styrene-block-ethylene oxide) (PS-b-PEO) copolymer thin films blended with FePt nanoparticles is studied. In a first step, it is shown that FePt nanoparticles stabilized by oleic acid ligands are distributed within the PS matrix phase, whereas the same particles partially covered with short dopamine-terminated-methoxy poly(ethylene oxide) (mPEO-Dopa) are located at PS/PEO interfaces. The swelling of PS domains, induced by FePt_oleic acid nanoparticles during the solvent annealing process, results in formation of a disordered microstructure in comparison to the well-organized hexagonally close-packed (HCP) cylinder phase formed in the neat PS-b-PEO copolymer. The evolution of the microstructure of PS-b-PEO/FePt_mPEO-Dopa composite has been investigated for different solvent annealing treatments. Under high-humidity conditions during the vapor annealing process, the addition of FePt nanoparticles results in formation of spheres in the film split into terraces. The upper and lower terraces are occupied by spheres organized in an unusual square and HCP phases, respectively. Under low-humidity conditions, undulated PEO cylinders oriented parallel to substrate are formed in the presence of FePt nanoparticles. In this case, we observe that most of the nanoparticles accumulate within the core of topological defects, which induces a low nanoparticle concentration at the PS/PEO interfaces and so stabilizes an intermediate undulated cylinder phase.     

Recovery of nanoparticles produced in phosphatidylcholine-based template phases

This paper focuses on the characterization and use of polymer-modified phosphatidylcholine (PC)/sodium dodecyl sulfate (SDS)-based inverse microemulsions as a template phase for BaSO4 nanoparticle formation. The area of the optically clear inverse microemulsion phase in the isooctane/hexanol/water/PC/SDS system is not significantly changed by adding polyelectrolytes, i.e., poly(diallyldimethylammonium chloride) (PDADMAC), or amphoteric copolymers of diallyldimethylammonium chloride and maleamid acid to the SDS-modified inverse microemulsion. Shear experiments show non-Newtonian flow behavior and oscillation experiments show a frequency-dependent viscosity increase (dilatant behavior) of the microemulsions. Small amounts of bulk water were identified by means of differential scanning calorimetry. One can conclude that the macromolecules are incorporated into the individual droplets, and polymer-filled microemulsions are formed. The polymer-filled microemulsions were used as a template phase for the synthesis of BaSO4 nanoparticles. After solvent evaporation the nanoparticles were redispersed in water and isooctane, respectively. The polymers incorporated into the microemulsion are involved in the redispersion process and influence the size and shape of the redispersed BaSO4 particles in a specific way. The crystallization process mainly depends on the type of solvent and the polymer component added. In the presence of the cationic polyelectrolyte PDADMAC the crystallization to larger cubic crystals is inhibited, and layers consisting of polymer-stabilized spherical nanoparticles of BaSO4 (6 nm in size) will be observed.     

Preparation of sterically stabilized nanoparticles by desolvation from graft copolymers

A new method is described for the preparation of sterically stabilized nanoparticles of defined size and polydispersity which are stabilized in aqueous solution by the presence of covalently linked monomethoxy–poly (oxyethylene) (MeOPOE) chains. The nanoparticles (100–270 nm mean diameter) were prepared by a process of desolvation of a graft copolymer prepared from poly(2-aminoethylmethacrylate) (PAEMA) and MeOPOE. Reproducible desolvation was achieved by the addition of sodium phosphate buffer to the copolymer in aqueous solution to give particles which were crosslinked in situ with the addition of glutaraldehyde. The size (mean diameter) and polydispersity (Q) of the particles were determined by Photon Correlation Spectroscopy (PCS). The temperature at which the desolvation reaction was performed was found to influence the particle size; at low temperatures (5–12°C), small particles were produced (99–121 nm, Q = 0.090–0.121), whereas at much higher temperatures (40–55°C), particles as large as 224–275 nm (Q = 0.138–0.127) were generated. Other parameters such as the graft copolymer concentration, the amount of glutaraldehyde added, the pH of the sodium phosphate buffer added, and the reaction time were found to be of relative insignificance in influencing the particle size. In addition to those involved in drug delivery, our method of nanoparticle preparation may be of interest to those engaged in the preparation of particulate materials and colloidal dispersions for other specific applications (e.g. stabilized photographic emulsions).     

SiO2/聚甲基丙烯酸叔丁酯核壳复合微粒的制备与表征

以甲基丙烯酸-3-(三甲氧基硅基)丙酯(MPS)修饰的SiO2胶体粒子为种子,甲基丙烯酸叔丁酯(tBMA)为单体、十二烷基硫酸钠(SDS)为乳化剂,采用种子乳液聚合法制备了SiO2/聚甲基丙烯酸叔丁酯的核壳复合微粒。微粒经水解后形成具有pH敏感性的无机/有机复合微粒。研究了影响核壳复合微粒形态结构的因素,结果发现,控制SiO2种子乳液的质量分数在1.5%～2%,可避免聚合过程中生成纯聚甲基丙烯酸叔丁酯乳胶粒子;反应体系中乳化剂SDS的用量超过质量分数0.3%时,易形成纯聚合物乳胶粒子;SDS用量低于质量分数0.15%时,生成的核壳复合微粒易产生团聚;单体和交联剂用量升高,核壳复合微粒的壳层厚度增加,用量过高会导致核壳复合微粒出现团聚现象,并且有纯聚合物乳胶粒子生成。采用TEM、NMR和FTIR及接触角测试技术分析结果表明,复合微粒是由SiO和聚甲基丙烯酸叔丁酯组成的核壳结构微粒。     

Preparation of size-controlled, highly populated, stable, and nearly monodispersed Ag nanoparticles in an organic medium from a simple interfacial redox process using a conducting polymer

The reducing property of an organically soluble conducting polymer (poly(o-methoxyaniline), POMA) is used to prepare monodisperse, size-controlled, highly populated, and highly stable silver nanoparticles in an organic medium through an interfacial redox process with an aqueous AgNO3 solution. The transition of emeraldine base (EB) to the pernigraniline base (PB) form of POMA occurs during nanoparticle formation, and the nitrogen atoms of POMA(PB) stabilize Ag nanoparticles by coordination to the adsorbed Ag(+) on the nanoparticle surface. The conductivity of the nanocomposite is on the order of 10(-11) S/cm, indicating that no doping of POMA occurs under the preparation conditions. The nanoparticles are free of excess oxidant and external stabilizer particles. The POMA (EB) concentration tailors the size of nanoparticles, and at its higher concentration (0.01% POMA with 0.01 N AgNO3), very dense Ag nanoparticles (6 x 10(15) particles/m(2)) of almost uniform size and shape are produced. The rate constant and Avrami exponent values of the nanoparticle formation are measured from the time-dependent UV-vis spectra using the Avrami equation. The Avrami exponent (n) values are close to 1, indicating 2D athermal nucleation with the circular shape of the nuclei having diffusion-controlled growth. The rate constant values are almost independent of AgNO3 concentration but are strongly dependent on POMA concentration. The higher rate constant with increasing POMA(EB) concentration has been attributed for the lowering of nanoparticle size due to increased nucleation density.     

Synthesis and characterization of micro/nanoparticles of poly(vinylalcohol-co-vinylcinnamate) derivatives

Various poly(vinylalcohol-co-vinylcinnamate) derivatives including poly(vinylalcohol-co-vinylcinnamate), poly(vinylalcohol-co-vinyl-4-methoxycinnamate), poly(vinylalcohol-co-vinyl-2,4-dimethoxycinnamate) and poly(vinylalcohol-co-vinyl-2,4,5-trimethoxycinnamate) were synthesized by grafting poly(vinylalcohol) with appropriate cinnamoyl groups. The self-assembly of grafted products into spherical micellar nanoparticles was performed, and particles were analyzed using dynamic light scattering, scanning electron microscopy, and transmission electron microscopy. ¹H NMR analyses of the well-dispersed micellar particle suspensions and polymer solutions indicated that the hydroxyl groups of the polymer were on the outer surface of the spheres, while the cinnamoyl moieties were buried inside the spheres forming crystalline structure. Polymer with a higher degree of cinnamoyl substitution gave smaller particles upon self-assembly. Variations in particle sizes obtained from PV(OH) grafted with cinnamoyl derivatives of different methoxy substitution on the benzene ring were observed. Molecular weight of the polymers did not significantly affect nanoparticle size and morphology. In addition, self-assembly of the poly(vinylalcohol-co-vinylcinnamate) derivatives into hollow reverse micellar microparticles of uniform size was also demonstrated. ¹H NMR spectrum of the reverse micellar micro-particle suspension indicated that the cinnamoyl moieties were not in a crystalline state.