共查询到20条相似文献,搜索用时 562 毫秒
1.
矩阵理论在半导体激光器耦合中的应用 总被引:2,自引:1,他引:1
傍轴近似下的光学矩阵理论,可以简化光束传输计算过程,使光学系统设计更为方便。将ABCD变换矩阵方法引入到耦合光学系统的设计中,运用高斯光束的ABCD法则,详尽地给出了某一耦合方式下的半导体激光器耦合入单模光纤系统的设计;另一方面,对系统的耦合损耗与耦合距离的关系进行了理论计算,并把计算结果与最近的实验报道做了比较,它们基本相吻合,说明此方法是可行的、合理的。从整个设计及理论计算来看,ABCD矩阵方法减少了复杂的计算,从而简化了设计过程,与通常的衍射计算相比,它不失为一种方便、有效的方法,同时它对生产半导体激光耦合器也有实际指导意义。 相似文献
2.
3.
Lujun Huang Xiaoshuang Chen Bo Ni Guanhai Li Xiaofang Wang Zhifeng Li Wei Lu 《Photonics and Nanostructures》2013,11(2):115-122
A general transformation is proposed to design the compact waveguide coupler with homogeneous media. By dividing the coupling region into several triangle blocks and engaging the transformation, material inhomogeneity of the coupler can be eliminated, and thus the device only requires homogeneous and anisotropic media. Also, it is found that the electromagnetic field in the coupling region can be controlled artificially and the field in the two waveguides is little influenced. Thus, much freedom and flexibility is provided in the design of waveguide coupler. Besides, the general transformation can also be extended to design waveguide bender with homogeneous media. Furthermore, Full wave simulation based on finite element method is performed to verify the performance of the waveguide coupler. 相似文献
4.
A novel and simple design technique for triangular spectrum response of fibre Bragg grating (FBG) is presented based on a linear chirped grating. It is shown that this method is fast and can give a straightforward solution to meet a design target. The numerical simulation examples verified the effectiveness of the design method. A general approach to design for multichannel triangular spectral responses for FBG filters is proposed, which provides a solution that achieves a minimum change of refractive index for the fibre. 相似文献
5.
针对一类多项式形式的Hopf分岔系统, 提出了一种鲁棒稳定的控制器设计方法. 使用该方法设计控制器时不需要求解出系统在分岔点处的分岔参数值, 只需要估算出分岔参数的上下界, 然后设计一个参数化的控制器, 并通过Hurwitz判据和柱形代数剖分技术求解出满足上下界条件的控制器参数区域, 最后在得到的这个区域内确定出满足鲁棒稳定的控制器参数值. 该方法设计的控制器是由包含系统状态的多项式构成, 形式简单, 具有通用性, 且添加控制器后不会改变原系统平衡点的位置. 本文首先以Lorenz系统为例说明了控制器的推导和设计过程, 然后以van der Pol振荡系统为例, 进行了工程应用. 通过对这两个系统的控制器设计和仿真, 说明了文中提出的控制器设计方法能够有效地应用于这类Hopf分岔系统的鲁棒稳定控制, 并且具有通用性. 相似文献
6.
7.
We present a general method for the design of 2-dimensional nonlinear photonic quasicrystals that can be utilized for the simultaneous phase matching of arbitrary optical frequency-conversion processes. The proposed scheme--based on the generalized dual-grid method that is used for constructing tiling models of quasicrystals--gives complete design flexibility, removing any constraints imposed by previous approaches. As an example we demonstrate the design of a color fan--a nonlinear photonic quasicrystal whose input is a single wave at frequency omega and whose output consists of the second, third, and fourth harmonics of omega, each in a different spatial direction. 相似文献
8.
Biddut Banik Josip Vukusic Hans Hjelmgren Jan Stake 《International Journal of Infrared and Millimeter Waves》2008,29(10):914-923
We present a method to optimize the epitaxial layer structure of an InGaAs/InP uni-traveling-carrier photo-diode (UTC-PD)
for continuous THz-wave generation. The design approach used is general in that it can be applied for any target frequency
while this study focuses on 340 GHz. The photodiode epitaxy is modeled and optimized using a TCAD software implementing the
hydrodynamic semiconductor equations. This physical device model was found to be in good agreement with reported experimental
results. It is shown that the UTC-PD can generate ~1 mW at 340 GHz by choosing the optimum absorption layer and collection
layer thicknesses. 相似文献
9.
《Physica E: Low-dimensional Systems and Nanostructures》2011,43(10):2628-2631
We implement and compare two theoretical models for stationary electron transport in quantum cascade lasers and Stark ladders. The first one, the nonequilibrium Green's function method is a very general scheme to include coherent quantum mechanics and incoherent scattering with phonons and device imperfections self-consistently. However, it is numerically very demanding and cannot be used for systematic device parameter scans. For this reason, we also implement the approximate, numerically efficient ensemble Monte Carlo method and assess its applicability on the above mentioned transport problems. We identify a transport regime in which results of both methods quantitatively agree. In this regime, the ensemble Monte Carlo method is well suited to propose design improvements. 相似文献
10.
非共面多光束干涉及其在制作周期性微结构中的应用(Ⅰ)--一般分析及二维周期结构 总被引:1,自引:1,他引:0
非共面多光束干涉可以在空间形成二维或三维周期性强度分布,从而被用来制作二维或三维光子晶体.本文将对此课题的相关物理基础进行较为系统的分析和讨论,为沟通基础物理与近代物理的联系,理解光子晶体这一重要的前沿课题从一个侧面打下基础.本文第一部分首先简要介绍了此领域的相关背景,然后给出非共面多光束干涉的一般分析,最后着重讨论了非共面三光束干涉所形成的二维周期性空间结构,包括结构类型、光束设计及偏振最佳化等问题. 相似文献
11.
We report an external cavity diode laser (ECDL), using a diode whose front facet is not anti-reflection (AR) coated that has
a mode-hop-free (MHF) tuning range greater than 135 GHz. We achieved this using a short external cavity and by simultaneously
tuning the internal and external modes of the laser. We find that the precise location of the pivot point of the grating in
our laser is less critical than commonly believed. The general applicability of the method, combined with the compact portable
mechanical and electronic design, makes it well suited for both research and industrial applications. 相似文献
12.
光谱仪是进行光谱分析时所必需的重要仪器。目前在科学研究和高等教育教学中广泛应用的光谱仪大多单为某一功能而设计,且价格昂贵。本文以常见的发射式光栅光谱仪为例,进行普通光谱仪的功能扩展设计研究与测试,使普通光谱仪从单一的发射光谱仪扩展成为集荧光光谱、透射光谱和反射光谱的测量于一体的综合性光谱仪。结果表明:通过添加外部光源、搭建测试样品架的方法,在精度要求不是特别高的情况下,可以满足一般教学科研的需要。通过扩展设计,降低了分析测量的成本,对于样品的低成本分析测量及改进普通光谱仪的设计具有一定的借鉴意义。 相似文献
13.
We present an extremely compact wavelength division multiplexer design, as well as a general framework for designing and optimizing frequency selective devices embedded in photonic crystals satisfying arbitrary design constraints. Our method is based on the Dirichlet-to-Neumman simulation method and uses low rank updates to the system to efficiently scan through many device designs. 相似文献
14.
Korean river design standards set general design standards for rivers and river-related projects in Korea, which systematize the technologies and methods involved in river-related projects. This includes measurement methods for parts necessary for river design, but does not include information on shear stress. Shear stress is one of the factors necessary for river design and operation. Shear stress is one of the most important hydraulic factors used in the fields of water, especially for artificial channel design. Shear stress is calculated from the frictional force caused by viscosity and fluctuating fluid velocity. Current methods are based on past calculations, but factors such as boundary shear stress or energy gradient are difficult to actually measure or estimate. The point velocity throughout the entire cross-section is needed to calculate the velocity gradient. In other words, the current Korean river design standards use tractive force and critical tractive force instead of shear stress because it is more difficult to calculate the shear stress in the current method. However, it is difficult to calculate the exact value due to the limitations of the formula to obtain the river factor called the tractive force. In addition, tractive force has limitations that use an empirically identified base value for use in practice. This paper focuses on the modeling of shear-stress distribution in open channel turbulent flow using entropy theory. In addition, this study suggests a shear stress distribution formula, which can easily be used in practice after calculating the river-specific factor T. The tractive force and critical tractive force in the Korean river design standards should be modified by the shear stress obtained by the proposed shear stress distribution method. The present study therefore focuses on the modeling of shear stress distribution in an open channel turbulent flow using entropy theory. The shear stress distribution model is tested using a wide range of forty-two experimental runs collected from the literature. Then, an error analysis is performed to further evaluate the accuracy of the proposed model. The results reveal a correlation coefficient of approximately 0.95–0.99, indicating that the proposed method can estimate shear-stress distribution accurately. Based on this, the results of the distribution of shear stress after calculating the river-specific factors show a correlation coefficient of about 0.86 to 0.98, which suggests that the equation can be applied in practice. 相似文献
15.
磁脉冲压缩器用脉冲变压器的设计 总被引:4,自引:3,他引:1
本文简要说明了磁脉冲压缩器的工作原理。着重介绍了其输入、输出脉冲变压器的等效回路设计法。并将该方法用于实例进行验证。结果说明,这种设计方法是非常成功的,而且可以推广到一般情况下的脉冲变压器的设计。 相似文献
16.
针对反射式成像光谱系统普遍存在多次反射(和衍射)产生杂散光和装调难度大等问题,设计了一种高性能透射式系统,全部使用通用光学组件,简化了系统结构,降低了成本和装调难度,较传统成像光谱仪有更广的适用范围。该设计中全部部件都非定制,可以根据应用场合更换,具有较好的灵活性,采用透射的方式,减少了杂散光的影响。利用ZEMAX软件仿真、优化了搭配两组不同物镜的系统光路,对畸变、MTF、色差等性能进行测试。对比25和50 mm物镜的系统性能,发现望远镜头的更换对整个系统成像质量的影响不大。参照设计参数成功搭建出一台成像光谱仪,其中望远物镜采用准对称双高斯结构,有利于控制场曲和畸变;采用透射式平面衍射光栅作为分光器件,制作工艺成熟,无需定制,装调简单。光谱分辨率和畸变测试结果显示该系统拥有良好的畸变控制能力,光谱分辨率达到2 nm,满足设计要求,利用标定后的系统测得的氘灯光谱取得了较为理想的结果。 相似文献
17.
为了验证空间光学系统热设计的合理性,利用光-机-热集成的热光学分析技术论证了空间光学系统的热设计方案。首先,阐述了热光学技术的一般方法以及热光学技术与热设计的关系,同时根据空间光学遥感器所处的空间环境和结构特点,应用被动和主动热控技术对空间光学系统进行了热设计。然后,利用有限元方法对热控后的温度场和热弹性变形进行了分析,得出该温度载荷条件下光学元件表面的变形量及刚体位移量,利用Zemike多项式进行了波面拟合。最后,用CodeV光学设计软件计算了热载荷作用下光学系统的传递函数。结果表明,各种工况下全视场范围内光学系统分辨率为50lp时,传递函数均超过0.5,成像良好,能够满足光学设计指标,热设计方案合理可行。 相似文献
18.
This paper aims to study the general conditions under which omnidirectional band gaps (OBGs) are achieved by using heterostructure magnetic photonic crystals (HMPCs). These structures contain periodic layers with alternative dielectric permittivity and magnetic permeability. The proposed design offers the stacking of two magnetic photonic crystals (MPCs), where one MPC has Brewster’s angle at TE polarization and another has the angle at TM polarization. The propagation of electromagnetic waves is investigated by means of the transfer matrix method. Also, the total reflection frequency range for any incident angle and polarization is discussed in this paper. As a conclusion, although each MPC has no OBG individually, the proposed HMPC may contain an OBG. The main advantage of the proposed design is that the obtained OBG is independent of the ambient media refractive index. Therefore, it can be used in engineering omnireflectors in integrated photonics. 相似文献
19.
G. Mosetti D. Challet S. Solomon 《The European Physical Journal B - Condensed Matter and Complex Systems》2009,71(4):573-577
Perfect synchronicity in N-player games is a useful theoretical dream, but communication delays are inevitable and may result
in asynchronous interactions. Some systems such as financial markets are asynchronous by design, and yet most theoretical
models assume perfectly synchronized actions. We propose a general method to transform standard models of adaptive agents
into asynchronous systems while preserving their global structure under some conditions. Using the minority game as an example,
we find that the phase and fluctuations structure of the standard game subsists even in maximally asynchronous deterministic
case, but that it disappears if too much stochasticity is added to the temporal structure of interaction. Allowing for heterogeneous
communication speeds and activity patterns gives rise to a new information ecology that we study in details. 相似文献
20.
This work presents active control of high-frequency vibration using skyhook dampers. The choice of the damper gain and its optimal location is crucial for the effective implementation of active vibration control. In vibration control, certain sensor/actuator locations are preferable for reducing structural vibration while using minimum control effort. In order to perform optimisation on a general built-up structure to control vibration, it is necessary to have a good modelling technique to predict the performance of the controller. The present work exploits the hybrid modelling approach, which combines the finite element method (FEM) and statistical energy analysis (SEA) to provide efficient response predictions at medium to high frequencies. The hybrid method is implemented here for a general network of plates, coupled via springs, to allow study of a variety of generic control design problems. By combining the hybrid method with numerical optimisation using a genetic algorithm, optimal skyhook damper gains and locations are obtained. The optimal controller gain and location found from the hybrid method are compared with results from a deterministic modelling method. Good agreement between the results is observed, whereas results from the hybrid method are found in a significantly reduced amount of time. 相似文献