无壁面参数低雷诺数非线性涡黏性模式研究

建立了一个低雷诺数的非线性涡黏性湍流模式,该模式的一个显著特性是它不包含壁面参数（如y^ ,n等）,因而特别适用于复杂几何流场的计算,本模式在几种包括回流、分离、激波等典型流动中进行了验证,结果令人满意。     

A general one-equation turbulence model for free shear and wall-bounded flows

The purpose of thiswork is to introduce a complete and general one-equation model capable of correctly predicting a wide class of fundamental turbulent flows like boundary layer, wake, jet, and vortical flows. The starting point is the mature and validated two-equation k−ω turbulence model of Wilcox. The newly derived one-equation model has several advantages and yields better predictions than the Spalart-Allmaras model for jet and vortical flows while retaining the same efficiency and quality of the results for near-wall turbulent flows without using a wall distance. The derivation and validation of the new model using findings computed by the Spalart-Allmaras and the k−ω models are presented and discussed for several free shear and wall-bounded flows.     

多孔介质壁面剪切湍流速度时空关联的研究

作为一个基础统计量,时空关联函数在湍流问题的研究中有着广泛的应用,是研究湍流噪声、湍流中物质扩散和大涡模拟亚格子模型等问题的重要参考.本文通过建立三维多孔结构壁面剪切湍流模型,采用含Darcy-Brinkman-Forchheimer作用力项的格子Boltzmann方程对无穷大多孔介质平行板之间壁湍流进行了数值模拟,进而研究其速度脉动时空关联函数的统计特性.一方面,根据计算得到的流场数据,对比分析了常规槽道湍流与多孔介质壁面槽道湍流的时间关联函数.另一方面,计算并讨论了不同孔隙率和渗透率的多孔介质壁面对速度脉动时空关联性的影响.通过研究表明:多孔结构壁面剪切湍流的时空关联函数等值线与椭圆理论相符;在研究参数范围内,多孔介质壁面的速度时空关联系数随着孔隙率增大而增大,随着渗透率增大而减小.同时发现在槽道壁面的近壁区、过渡区、对数律区和中心区等不同位置处,速度时空关联呈现较大差异性:越远离壁面位置(对数律区和中心区),其时空关联函数所呈现的关联等值线椭圆越细长,高值相关等值线越集中.多孔介质主要改变速度时空关联椭圆图像的椭圆率,说明多孔介质壁面主要影响湍流横扫速度.     

Calculation of complex near-wall turbulent flows with a low-Reynolds-number k-ϵ model

An improved low-Reynolds-number k-? model has been formulated and tested against a range of DNS (direct numerical simulation) and experimental data for channel and complex shear layer flows. The model utilizes a new form of damping function adopted to account for both wall proximity effects and viscosity influences and a more flexible damping argument based on the gradient of the turbulent kinetic energy on the wall. Additionally, the extra production of the inhomogeneous part of the viscous dissipation near a wall has been added to the dissipation equation with significantly improved results. The proposed model was successfully applied to the calculation of a range of wall shear layers in zero, adverse and favourable pressure gradients as well as backward-facing-step separated flows.     

Predictive Capabilities of an Improved Cubic k–ε Model for Inert Steady Flows

Through an improved ε transport equation, a major quality enhancement of the cubic k–ε model, earlier developed in[13], is obtained. The ε-equation of [13],yielding good results for wall-bounded and rotating flows, is combined with the one derived by Shih et al. [20], which produces good results for free shear flows (e.g. the plane jet–round jet anomaly is resolved).Results are presented for the following flows: fully developed stationary and rotating channel and pipe, backward-facing step, sudden pipe expansion, smooth channel expansion and contraction, plane and round jet. Heat transfer predictions in turbulent impinging jets are also discussed. Accurate results are obtained for the mean flow quantities for all test cases, without case dependent model tuning. This revised version was published online in July 2006 with corrections to the Cover Date.     

Computation of backward-facing step flows by a second-order Reynolds stress closure model

This paper scrutinizes the predictive ability of the differential stress equation model in complex shear flows. Two backward-facing step flows with different expansion ratios are solved by the LRR turbulence model with an anisotropic dissipation model and the near-wall regions of the separated side resolved by a near-wall model. The computer code developed for solving the transport equations is based on the finite-volume-finite-difference method. In the numerical solution of the time-averaged momenum equations the Reynolds stresses are treated partially as a diffusion term and partially as a source term to avoid numerical instability. Computational results are compared with experimental data. It is found that the near-wall region of the separated side resolved by the near-wall model, the LRR model with a simple modification of an anisotropic dissipation model can predict backward step flows well.     

New Molecular Transport Model for FDF/LES of Turbulence with Passive Scalar

The paper addresses the issue of modelling and computation of wall-bounded turbulent flows with passive scalars. In the present approach, the large eddy simulation (LES) method is used to compute the velocity field in the near-wall zone. The LES is coupled with the Lagrangian filtered density function (FDF) model for the transport of a passive scalar. In the paper, we propose two models to account for the molecular transport near the wall and investigate their behaviour in the limit case of small filter widths. One of the models is tested numerically, and computational results for a heated channel flow are compared with the available DNS data.     

大涡模拟的壁模型及其应用

大涡模拟是研究湍流的非定常特性的重要方法. 但解析壁面层的大涡模拟所需的计算量与直接数值模拟相当,是大涡模拟在高雷诺数壁湍流数值模拟中所面临的主要困难. 解析壁面层所需的网格尺度与壁面黏性长度同量级,是引起壁湍流大涡模拟计算量增加的主要原因. 壁模型通过模化近壁流动避免了完全解析壁面层,可以显著地降低壁湍流大涡模拟的计算量,是克服上述困难的有效方法. 本文介绍了大涡模拟壁模型的主要类型;详细讨论了常用的壁面应力模型,特别是平衡层模型和双层模型的构建思路和特点;基于近壁流动的特征讨论了应力边界条件的必要性和适用性;指出了壁面应力模型的局限性以及考虑非平衡效应修正的各种方法;讨论了壁面应力模型的研究历史、最新进展和发展趋势,给出了常用的壁面应力模型的分支与发展关系图;并基于Werner-Wengle模型实现了周期山状流的大涡模拟.      

壁湍流相干结构和减阻控制机理

剪切湍流中相干结构的发现是上世纪湍流研究的重大进展之一,这些大尺度的相干运动在湍流的动力学过程中起重要作用,也为湍流的控制指出了新的方向.壁湍流高摩擦阻力的产生与近壁区流动结构密切相关,基于近壁区湍流动力学过程的减阻控制方案可以有效降低湍流的摩擦阻力,但是随着雷诺数的升高, 这些控制方案的有效性逐渐降低.近年来研究发现, 在高雷诺数情况下外区存在大尺度的相干运动,这种大尺度运动对近壁区湍流和壁面摩擦阻力的产生有重要影响,为高雷诺数湍流减阻控制策略的设计提出了新的挑战.该文将对壁湍流相干结构的研究历史加以简单的回顾,重点介绍近壁区相干结构及其控制机理、近年来高雷诺数外区大尺度运动的研究进展,在此基础上提出高雷诺数减阻控制研究的关键科学问题.      

A variant of the low-Reynolds-number two-equation turbulence model applied to variable property mixed convection flows

Previous work has demonstrated that the low-Reynolds-number model of Launder and Sharma (1974) offers significant advantages over other two-equation turbulence models in the computation of highly non-universal buoyancy-influenced (or “mixed convection”) pipe flows. It is known, however, that the Launder and Sharma model does not possess high quantitative accuracy in regard to simpler forced convection flows. A variant of the low-Reynolds-number scheme is developed here by reference to data for constant property forced convection flows. The re-optimized model and the Launder and Sharma formulation are then examined against experimental measurements for mixed convection flows, including cases in which variable property effects are significant.     

Application of the method of near-wall boundary conditions to an investigation of turbulent flows with longitudinal pressure gradients

The dynamic and thermal characteristics of steady near-wall boundary layers in flow deceleration regions are studied on the basis of differential turbulencemodels. The method of transferring the boundary conditions from the wall into the flow is tested for flows with variable longitudinal pressure gradients. Using differential turbulence models in the transition and low-Reynolds-number regions near surfaces the effect of the parameters of highly turbulent free stream on the development of dynamic processes in the developed turbulent boundary layer in the flow deceleration region is studied. The calculated profiles of the velocity, the kinetic energy of turbulence, the friction and thermal conductivity coefficients, and the temperature factor are compared with the experimental data in the cases in which the boundary conditions are preassigned both on the wall and in the flow. The effect of an intermediate boundary condition on the results of the calculations is analyzed.     

A vorticity stretching diagnostic for turbulent and transitional flows

Vorticity stretching in wall-bounded turbulent and transitional flows has been investigated by means of a new diagnostic measure, denoted by Γ, designed to pick up regions with large amounts of vorticity stretching. It is based on the maximum vorticity stretching component in every spatial point, thus yielding a three-dimensional scalar field. The measure was applied in four different flows with increasing complexity: (a) the near-wall cycle in an asymptotic suction boundary layer (ASBL), (b) K-type transition in a plane channel flow, (c) fully turbulent channel flow at Re _τ = 180 and (d) a complex turbulent three-dimensional separated flow. Instantaneous data show that the coherent structures associated with intense vorticity stretching in all four cases have the shape of flat ‘pancake’ structures in the vicinity of high-speed streaks, here denoted ‘h-type’ events. The other event found is of ‘l-type’, present on top of an unstable low-speed streak. These events (l-type) are further thought to be associated with the exponential growth of streamwise vorticity in the turbulent near-wall cycle. It was found that the largest occurrence of vorticity stretching in the fully turbulent wall-bounded flows is present at a wall-normal distance of y ⁺?=?6.5, i.e. in the transition between the viscous sublayer and buffer layer. The associated structures have a streamwise length of ~200–300 wall units. In K-type transition, the Γ-measure accurately locates the regions of interest, in particular the formation of high-speed streaks near the wall (h-type) and the appearance of the hairpin vortex (l-type). In the turbulent separated flow, the structures containing large amounts of vorticity stretching increase in size and magnitude in the shear layer upstream of the separation bubble but vanish in the backflow region itself. Overall, the measure proved to be useful in showing growing instabilities before they develop into structures, highlighting the mechanisms creating high shear region on a wall and showing turbulence creation associated with instantaneous separations.     

Prediction of turbulent wall shear flows directly from wall

The fully elliptic Reynolds-averaged Navier–Stokes equations have been used together with Lam and Bremhorst's low-Reynolds-number model, Chen and Patel's two-layer model and a two-point wall function method incorporated into the standard k-? model to predict channel flows and a backward-facig step flow. These flows enable the evaluation of the performance of different near-wall treatments in flows involving streamwise and normal pressure gradients, flows with separation and flows with non-equilibrium turbulence characteristics. Direct numerical simulation (DNS) of a channel flow with Re =3200 further provides the detailed budgets of each modelling term of the k and ?-transport equations. Comparison of model results with DNS data to evaluate the performance of each modelling term is also made in the present study. It is concluded that the low-Reynolds-number model has wider applicability and performs better than the two-layer model and wall function approaches. Comparison with DNS data further shows that large discrepancies exist between the DNS budgets and the modelled production and destruction terms of the ? equation. However, for simple channel flow the discrepancies are similar in magnitude but opposite in sign, so they are cancelled by each other. This may explain why, even when employing such an inaccurately modelled ?-equation, one can still predict satisfactorily some simple turbulent flows.     

Current capabilities for modelling turbulence in industrial flows

This paper summarizes some of the more widely applied or promising schemes for computing heat and momentum transport in industrially relevant flows. Such flows typically involve complex flow domains, severe pressure gradients and regions of flow separation and reattachment. Models tuned by reference to equilibrium, simple shear flows cannot in general be relied upon to predict accurately the effects of these complexities on the transport processes. The main conclusions drawn are that second-moment closure offers a far more reliable basis for computing non-equilibrium turbulent flows than eddy-viscosity schemes, especially in flows with very complex strain fields or those substantially affected by external force fields. Moreover, where significant variations in shear stress occur across the near-wall viscosity-affected sublayer, the usual practice of employing wall functions needs to be replaced by at least a two-equation model in order to capture, even qualitatively, the consequent effects on wall heat transfer or skin friction coefficient.     

Numerical investigation of fully developed turbulent fluid flow and heat transfer in a square duct

Three-dimensional fully developed turbulent fluid flow and heat transfer in a square duct are numerically investigated with the author's anisotropic low-Reynolds-number k-ε turbulence model. Special attenton has been given to the regions close to the wall and the corner, which are known to influence the characteristics of secondary flow a great deal. Hence, instead of the common wall function approach, the no-slip boundary condition at the wall is directly used. Velocity and temperature profiles are predicted for fully developed turbulent flows with constant wall temperature. The predicted variations of both local wall shear stress and local wall heat flux are shown to be in close agreement with available experimental data. The present paper also presents the budget of turbulent kinetic energy equation and the systematic evaluation for existing wall function forms. The commonly adopted wall function forms that are valid for two-dimensional flows are found to be inadequate for three-dimensional turbulent flows in a square duct.     

Predicting Buoyant Shear Flows Using Anisotropic Dissipation Rate Models

This paper examines the modeling of two-dimensional homogeneous stratified turbulent shear flows using the Reynolds-stress and Reynolds-heat-flux equations. Several closure models have been investigated; the emphasis is placed on assessing the effect of modeling the dissipation rate tensor in the Reynolds-stress equation. Three different approaches are considered; one is an isotropic approach while the other two are anisotropic approaches. The isotropic approach is based on Kolmogorov's hypothesis and a dissipation rate equation modified to account for vortex stretching. One of the anisotropic approaches is based on an algebraic representation of the dissipation rate tensor, while another relies on solving a modeled transport equation for this tensor. In addition, within the former anisotropic approach, two different algebraic representations are examined; one is a function of the Reynolds-stress anisotropy tensor, and the other is a function of the mean velocity gradients. The performance of these closure models is evaluated against experimental and direct numerical simulation data of pure shear flows, pure buoyant flows and buoyant shear flows. Calculations have been carried out over a range of Richardson numbers (Ri) and two different Prandtl numbers (Pr); thus the effect of Pr on the development of counter-gradient heat flux in a stratified shear flow can be assessed. At low Ri, the isotropic model performs well in the predictions of stratified shear flows; however, its performance deteriorates as Ri increases. At high Ri, the transport equation model for the dissipation rate tensor gives the best result. Furthermore, the results also lend credence to the algebraic dissipation rate model based on the Reynolds stress anisotropy tensor. Finally, it is found that Pr has an effect on the development of counter-gradient heat flux. The calculations show that, under the action of shear, counter-gradient heat flux does not occur even at Ri = 1 in an air flow. This revised version was published online in July 2006 with corrections to the Cover Date.     

Skin-friction drag reduction in turbulent channel flow based on streamwise shear control

It is known that stretching and intensification of a hairpin vortex by mean shear play an important role to create a hairpin vortex packet, which generates the large Reynolds shear stress associated with skin-friction drag in wall-bounded turbulent flows. In order to suppress the mean shear at the wall for high efficient drag reduction (DR), in the present study, we explore an active flow control concept using streamwise shear control (SSC) at the wall. The longitudinal control surface is periodically spanwise-arranged with no-control surface while varying the structural spacing, and an amplitude parameter for imposing the strength of the actuating streamwise velocity at the wall is introduced to further enhance the skin-friction DR. Significant DR is observed with an increase in the two parameters with an accompanying reduction of the Reynolds stresses and vorticity fluctuations, although a further increase in the parameters amplifies the turbulence activity in the near-wall region. In order to study the direct relationship between turbulent vortical structures and DR under the SSC, temporal evolution with initial eddies extracted by conditional averages for Reynolds-stress-maximizing Q2 events are examined. It is shown that the generation of new vortices is dramatically inhibited with an increase in the parameters throughout the flow, causing fewer vortices to be generated under the control. However, when the structural spacing is sufficiently large, the generation of new vortex is not suppressed over the no-control surface in the near-wall region, resulting in an increase of the second- and fourth-quadrant Reynolds shear stresses. Although strong actuating velocity intensifies the near-wall turbulence, the increase in the turbulence activity is attributed to the generation of counter-clockwise near-wall vortices by the increased vortex transport.     

简单剪切流动中转捩的低维模式与数值模拟

回顾了过去10年在壁湍流和自 由剪切流转捩问题的数值研究中取得的重要进展, 介绍了数值方法和模式研究方面 的进展, 以及由此带来的关于转捩理论认识上的进展. 对于壁面流动, 文中主要介 绍了渐进稳定流动中``跨越(bypass)转捩'研究中的各种观点. 本文也简要介绍了 对感受性和转捩控制方面的研究.     

Modeling the turbulent heat and momentum transfer in flows under different thermal conditions

Two-equation turbulence models for velocity and temperature (scalar) fields are developed to calculate wall shear flows under various flow conditions and related turbulent heat transfer under various wall thermal conditions. In the present models, we make the modified dissipation rates of both turbulent energy and temperature variance zero at a wall, though the wall limiting behavior of velocity and temperature fluctuations is reproduced exactly. Thus, the models assure computational expediency and convergence. Also, the present k- model is construted using a new type of expression for the Reynolds stress proposed by Abe et al. [Trans. JSME B 61 (1995) 1714–1721], whose essential feature lies in introducing the explicit algebraic stress model concept into the nonlinear k- formulation, and the present two-equation heat transfer model is constructed to properly take into account the effects of wall thermal conditions on the eddy diffusivity for heat. The models are tested with five typical velocity fields and four typical thermal fields. Agreement with experiment and direct simulation data is quite satisfactory.     

Wall-Distance-Free Turbulence Models Applied to Incompressible Flows

Abstract

A comparative study of low-Re wall-distance-free (WDF) turbulence models in incompressible flows is presented. The study includes the WDF k-? and the three-equation WDF k-?-γ as well as two k-? models which invoke the distance from the wall. The models are implemented in conjunction with a characteristics-based method and an implicit unfactored scheme. Comparison with direct-numerical-simulation data reveals that the WDF models provide much more accurate results for the dissipation rate, especially in the near wall region. A grid refinement study further reveals that the models which explicitly involve the distance from the wall cannot capture the correct turbulence dissipation rate behaviour in the near-wall region even on the finest grid, where grid-independent solution is achieved. However, the low-Re WDF models require slightly more iterations than the other k - ? models to converge. Results are presented for channel, flat plate and backward-facing step flows.