Tuning smart microgel swelling and responsive behavior through strong and weak polyelectrolyte pair assembly

The layer-by-layer (LbL) assembly of polyelectrolyte pairs on temperature and pH-sensitive cross-linked poly(N-isopropylacrylamide)-co-(methacrylic acid), poly(NIPAAm-co-MAA), microgels enabled a fine-tuning of the gel swelling and responsive behavior according to the mobility of the assembled polyelectrolyte (PE) pair and the composition of the outermost layer. Microbeads with well-defined morphology were initially prepared by synthesis in supercritical carbon dioxide. Upon LbL assembly of polyelectrolytes, interactions between the multilayers and the soft porous microgel led to differences in swelling and thermoresponsive behavior. For the weak PE pairs, namely poly(L-lysine)/poly(L-glutamic acid) and poly(allylamine hydrochloride)/poly(acrylic acid), polycation-terminated microgels were less swollen and more thermoresponsive than native microgel, whereas polyanion-terminated microgels were more swollen and not significantly responsive to temperature, in a quasi-reversible process with consecutive PE assembly. For the strong PE pair, poly(diallyldimethylammonium chloride)/poly(sodium styrene sulfonate), the differences among polycation and polyanion-terminated microgels are not sustained after the first PE bilayer due to extensive ionic cross-linking between the polyelectrolytes. The tendencies across the explored systems became less noteworthy in solutions with larger ionic strength due to overall charge shielding of the polyelectrolytes and microgel. ATR FT-IR studies correlated the swelling and responsive behavior after LbL assembly on the microgels with the extent of H-bonding and alternating charge distribution within the gel. Thus, the proposed LbL strategy may be a simple and flexible way to engineer smart microgels in terms of size, surface chemistry, overall charge and permeability.     

Cationic polyvinylamine binding to anionic microgels yields kinetically controlled structures

Polyvinylamine (PVAm) binding (absorption and adsorption) to carboxylated microgels gave colloidally stable, cationic microgels that can be centrifuged, washed, freeze dried, and redispersed in water with no loss in colloidal stability. Because both PVAm and the carboxylated microgels are pH sensitive, changes in microgel swelling and electrophoretic mobility in response to pH change can be positive or negative depending upon pH and the PVAm content of the microgels. For a given PVAm molecular weight, the steady-state saturated mass fraction of bound PVAm in the microgels varied by a factor of four in our experiments. We proposed that the PVAm content at saturation was controlled by the relative rates of the initial attachment of PVAm chains versus the rate of attached chain spreading on and into the microgel structure. This explanation was further supported by a series of quartz crystal microbalance measurements. Finally, PVAm binding to two types of PNIPAM microgels shows general features recently reported for other polyelectrolyte types. Specifically: (1) for surface localized anionic charges on the microgels, the mass fraction of bound PVAm increased with PVAm molecular weight and vice versa; (2) in virtually all conditions, the quantity of adsorbed cationic ammonium groups was much greater than the carboxylate content of the microgel; and (3) sodium chloride additions lowered the mass fraction of bound PVAm.     

Titrametric characterization of pH-induced phase transitions in functionalized microgels

The chain and radial functional group distributions in carboxylic acid-functionalized poly(N-isopropylacrylamide)-based microgels have significant impacts on the types of swelling responses exhibited by the microgels upon the application of a temperature and/or pH stimulus. Potentiometric, conductometric, and calorimetric titration approaches are used in this work to characterize the chain distributions of -COOH groups in five microgels prepared using different -COOH-functionalized monomers. A direct correlation is observed between the kinetically predicted formation of functional monomer blocks within the microgel, the excess Gibbs free energy of ionization, and the apparent pK(a) versus degree of ionization profiles generated from potentiometric titration. Isothermal titration calorimetry (ITC) can be used to quantify the relative number of functional groups present in microgels prepared with the same functional monomer and/or identify differences between microgels with the same bulk -COOH content but different chain distributions. In particular, microgels prepared with diacid-functionalized monomers exhibit a characteristic two-step ITC profile. For microgels with the same bulk -COOH content, the heat of ionization measured via ITC increases systematically with the overall change in both the pK(a) and the excess Gibbs free energy for microgels prepared with monoacid-functionalized monomers. Diacid monomer-functionalized microgels have lower ionization enthalpies attributable to the break-up of hydrogen-bonded intramolecular ring complexes upon carboxylic acid ionization. The inferred chain functional group distributions can be used to understand differences in microgel swelling across the pH-induced phase transition.     

Equilibrium and kinetic aspects of the uptake of poly(ethylene oxide) by copolymer microgel particles of N-isopropylacrylamide and acrylic acid

The use of microgels for controlled uptake and release has been an area of active research for many years. In this work copolymer microgels of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc), containing different concentrations of AAc and also cross-linking monomer, have been prepared and characterized. These microgels are responsive to pH and temperature. As well as monitoring the equilibrium response to changes in these variables, the rates of swelling/de-swelling of the microgel particles, on changing either the pH or the temperature, have also been investigated. It is shown that the rate of de-swelling of the microgel particles containing AAc is much faster than the rate of swelling, on changing the pH appropriately. This is explained in terms of the relative mobilities of the H(+) and Na(+) ions, in and out of the particles. It was observed that the microgels containing AAc, at pH 8, de-swelled relatively slowly on heating to 50 degrees C from 20 degrees C. This is attributed to the resistance to collapse associated with the large increase in counterion concentration inside the microgel particles. The swelling and de-swelling properties of these copolymer microgels have also been investigated in aqueous poly(ethylene oxide) (PEO) solutions, of different MW (2000-300 000). The corresponding absorbed amounts of PEO from solution onto the microgels have also been determined using a depletion method. The results, as a function of AAc content, cross-linker concentration, PEO MW, pH, and temperature, have been rationalized in terms of the ease and depth of penetration of the PEO chains into the various microgel particles and also the H-bonding associations between PEO and either the -COOH of the AAc moeities and/or the H of the amide groups (much weaker). Finally, the adsorption and desorption of the PEO molecules in to and out of the microgel particles have been shown to be extremely slow compared to normal diffusion time scales for polymer adsorption onto rigid surfaces.     

Poly (N-isopropylacrylamide) microgel based assemblies for organic dye removal from water: microgel diameter effects

Poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgel based assemblies (aggregates) were synthesized from microgels of various diameters via polymerization of the crosslinker N,N′-methylenebisacrylamide (BIS) in the presence of microgels in solution. We investigated the ability of the respective aggregates to remove the organic, azo dye molecule 4-(2-hydroxy-1-napthylazo) benzenesulfonic acid sodium salt (Orange II) from water at both room and elevated temperatures. The results from the microgel aggregates made from 1.1-μm-diameter [Parasuraman and Serpe. ACS Applied Materials & Interfaces, 2011] microgels were compared to aggregates synthesized from 321-nm and 1.43-μm-diameter microgels. Aggregates made from the same size microgels showed increased uptake efficiency as the concentration of BIS in the aggregates was increased, while for a given BIS concentration, the uptake efficiency increased with increasing microgel size in the aggregate. We attribute this to the “nature” of the aggregates; aggregates have void space between the microgels that can serve as reservoirs for Orange II uptake—the void spaces are hypothesized to increase with larger diameter microgels. By exploiting the thermoresponsive nature of the microgels, and microgel based aggregates, 85.3 % removal efficiencies can be achieved. Finally, all uptake trends for the aggregates, at room temperature, were fit with a Langmuir sorption isotherm model.     

浊度法表征温敏性微凝胶体积的相转变行为

以N-异丙基丙烯酰胺(NIPAM)、甲基丙烯酸(MAA)为单体,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,制备了温敏性聚(N-异丙基丙烯酰胺)(PNIPAM)和具有温度、pH敏感性的聚(N-异丙基丙烯酰胺-co-甲基丙烯酸)(PNIPAM-MAA)微凝胶。通过测定不同温度和pH条件下微凝胶浊度变化,表征微凝胶的温度及pH敏感性,描述了NaCl浓度和pH对微凝胶体积相转变温度的影响。同时,测定了微凝胶的临界聚沉浓度及临界絮凝温度,表征了微凝胶的稳定性,讨论了影响微凝胶的稳定性因素。     

Microgels containing methacrylic acid: effects of composition on pH-triggered swelling and gelation behaviours

pH-responsive microgels are cross-linked polymer colloids that swell when the pH approaches the pK _a of the particles. In this work, we present a comprehensive investigation of pH-triggered particle swelling and gel formation for a range of microgels containing methacrylic acid (MAA). The microgels investigated have the general composition poly(A/MAA/X), where A and X are the primary co-monomer and cross-linking monomer, respectively. The primary co-monomers were methyl methacrylate (MMA), ethyl acrylate (EA) or butyl methacrylate. The cross-linking monomers were either butanediol diacrylate (BDDA) or ethyleneglycol dimethacrylate (EGDMA). The microgels were studied using scanning electron microscopy, photon correlation spectroscopy (PCS) and dynamic rheology measurements. Gel phase diagrams were also constructed. The particles swelled significantly at pH values greater than approximately 6.0. It was shown that poly(EA/MAA/X) microgels swelled more strongly than poly(MMA/MAA/X) microgels. Furthermore, greater swelling occurred for particles prepared using EGDMA than BDDA. Concentrated dispersions of all the microgels studied exhibited pH-triggered gel formation. It was found that the fluid-to-gel transitions for the majority of the six microgel dispersions investigated could be explained using PCS data. In those cases, gelation was attributed to a colloidal glass transition. Interestingly, the microgels that were considered to have the highest hydrophobic content gelation occurred under conditions where little particle swelling was evident from PCS. The data presented show that gelled poly(EA/MAA/BDDA) and poly(MMA/MAA/EGDMA) microgel dispersions have the strongest elasticities at pH = 7.     

Kinetic prediction of functional group distributions in thermosensitive microgels

A kinetic model accounting for the copolymerization of up to four comonomers is applied to predict both chain and radial functional group distributions in carboxylic-acid-functionalized poly(N-isopropylacrylamide) (NIPAM)-based microgels. The model can accurately predict the experimentally observed radial distributions of functional monomers in microgels prepared using a variety of different carboxylic-acid-functionalized monomers with significantly different hydrophobicities, copolymerization kinetics, and reactivities, without requiring the use of adjustable parameters. Multimodal distributions can both be predicted and experimentally generated by copolymerizing two -COOH-containing monomers with widely different reactivities. Chain distributions and monomer block formation can also be probed using the kinetic model, allowing for qualitative predictions of the potentiometric titration behavior of the microgels. The kinetic model reported herein therefore provides the first available analytical method for semiquantitatively predicting and controlling functional group distributions in bulk-polymerized microgel systems.     

Ca2+ Responsive Microgel-Stabilized Pickering Emulsions

As an ionic cross-linker that can change the size of poly(N-isopropylacrylamide-co-acrylic acid) microgel, Ca²⁺ is applied as a trigger to demulsify microgel-stabilized oil/water Pickering emulsions. The influence of Ca²⁺ induced intra-particle ionic cross-linking and inter-particle aggregation on the stability of microgel-stablized “Pickering” emulsion is described. At low and mediate concentration of Ca²⁺, ionic cross-linking can change the internal elasticity of the microgel, and cause the coarsening of the oil droplets. At high concentration of Ca²⁺, microgels flocculate due to the salt out effect and the emulsion is destabilized. This work provide a facile method to control the stability of the Pickering emulsions at ambient condition.     

Temperature Response of PNIPAM Derivatives at Planar Surfaces: Comparison between Polyelectrolyte Multilayers and Adsorbed Microgels

Two strategies for the design of thermosensitive coatings based on poly‐N‐isopropyl acrylamide (PNIPAM) derivatives are presented: 1) polyelectrolyte multilayers containing a diblock copolymer with a large PNIPAM block and 2) adsorption of PNIPAM microgels. The multilayers show only a small but irreversible response to the increase of outer temperature due to the strong interdigitation between the charged part and the temperature‐sensitive block, while the adsorbed microgels show a pronounced and reversible response. It will be shown that the microgel number density can be easily controlled at the substrate. The swelling and shrinking of two extremes in density are characterized: densely packed microgels, which are considered as a film, and individual microgels, which are able to swell and shrink also lateral to the surface.     

Computer simulations of thermo-sensitive microgels: quantitative comparison with experimental swelling data

In this work, a quantitative comparison between experimental swelling data of thermo-sensitive microgels and computer simulation results obtained from a coarse-grained model of polyelectrolyte network and the primitive model of electrolyte is carried out. Polymer-polymer hydrophobic forces are considered in the model through a solvent-mediated interaction potential whose depth increases with temperature. The qualitative agreement between simulation and experiment is very good. In particular, our simulations predict a gradual shrinkage with temperature, which is actually observed for the microgels studied in this survey. In addition, the model can explain the swelling behavior for different contents of ionizable groups without requiring changes in the hydrophobic parameters. Our work also reveals that the abruptness of the shrinkage of charged gels is considerably conditioned by the number of monomeric units per chain. The swelling data are also analyzed with the Flory-Rhener theory, confirming some limitations of this classical formalism.     

Effect of initial substrate concentration of the Belousov-Zhabotinsky reaction on self-oscillation for microgel system

Self-oscillation for the microgel particles ( approximately 200 nm in diameter) was studied by changing initial substrate concentrations (i.e., malonic acid, sodium bromate, and nitric acid) of the Belousov-Zhabotinsky (BZ) reaction that is used for chemical energy for the self-oscillation. The cross-linked microgels are composed of N-isopropylacrylamide and ruthenium tris(2,2'-bipyridine), Ru(bpy) 3, which is a catalyst for the BZ reaction. Comparing with the homogeneous, stirred solution of the bulk solution for the BZ reaction, swelling/deswelling oscillation of the microgels showed longer induction period, different dependence of initial substrate concentrations on oscillation period, and different oscillation rhythm. The change in oscillation for the microgels can be understood by considering the microgel network effect.     

Assembly of poly(N-isopropylacrylamide)-co-acrylic acid microgel thin films on polyelectrolyte multilayers: Effects of polyelectrolyte layer thickness, surface charge, and microgel solution pH

Temperature- and pH-sensitive poly(N-isopropylacrylamide)?Cco-acrylic acid (pNIPAm-co-AAc) microgels were deposited on glass substrates coated with polyelectrolyte multilayers composed of the polycation poly(allylamine hydrochloride) (PAH) and the polyanion poly(sodium 4-styrenesulfonate) (PSS). The microgel density and structure of the resultant films were investigated as a function of: (1) the number of PAH/PSS layers (layer thickness); (2) the charge on the outer layer of the polyelectrolyte multilayer film; and (3) the pH of microgel deposition solution. The resultant films were studied by differential interference contrast optical microscopy, atomic force microscopy, and scanning electron microscopy. It was found that the coverage of the microgels on the surface was a complex function of the pH of the deposition solution, the charge on the outer layer of the polyelectrolyte thin film and the PAH/PSS layer thickness; although it appears that microgel charge plays the biggest role in determining the resultant surface coverage.     

Influence of charge density on the swelling of colloidal poly(N-isopropylacrylamide-co-acrylic acid) microgels

The volume phase transition of colloidal poly(N-isopropylacrylamide-co-acrylic acid) microgels depends in a complex way on the effective charge density within the polymer network. A series of monodisperse PNIPAM/AAc microgels with different content of acrylic acid were synthesized by surfactant-free emulsion polymerization employing sonication instead of a conventional stirring technique. Subsequently, the colloids were characterized by dynamic light scattering and electron microscopy. Potentiometric titrations provided the amount of carboxyl groups incorporated into the copolymer. The effective charge density was systematically controlled by the content of acrylic acid monomers, the pH value of the suspension, and the salt concentration. The hydrodynamic dimensions of the microgels have been measured by dynamic light scattering. The swelling/deswelling behavior is determined by the delicate balance between hydrophobic attraction of NIPAM and the repulsive electrostatic interactions of the carboxylate group of the acrylic acid moieties. Compared to their macroscopic counterparts the charged microgel particles show a significantly different swelling/deswelling behavior. This manifests in the occurrence of a two-step volume phase-transition process with increasing acrylic acid content. Hydrogen bonding has to be considered to understand this two step volume phase transition uniquely observed for colloidal microgels. Another interesting phenomenon presented here is the reversible formation of well-defined aggregates at low pH and under high salt conditions.     

Poly(N-vinylcaprolactam-co-glycidyl methacrylate) aqueous microgels labeled with fluorescent LaF3:Eu nanoparticles

We describe the synthesis and properties of functional microgel particles based on poly(N-vinylcaprolactam-co-glycidyl methacrylate) (PVCL/PGMA) copolymer. A series of colloidally stable microgel particles with a range of glycidyl methacrylate content were prepared by surfactant-free heterophase polymerization in water. The microgel particles obtained had hydrodynamic radii between 250 and 350 nm and were fairly monodisperse in size; however, a broadening of the particle size distribution was observed for samples with a low GMA content. The PVCL/PGMA microgel particles exhibit thermally responsive reversible changes in diameter in water, and the swelling degree increased with the PVCL fraction in the copolymer structure. These microgels were then modified with photoluminescent europium-doped lanthanum fluoride nanoparticles (LaF3:Eu-AEP) through reaction of the 2-aminoethyl phosphate surface ligands with epoxy groups present in the microgel. These hybrid microgels were colloidally stable and thermally responsive in aqueous solution.     

Polymer dynamics in responsive microgels: influence of cononsolvency and microgel architecture

The dynamics of polymers on the nm and ns scales inside responsive microgels was probed by means of Neutron Spin Echo (NSE) experiments. Four different microgels were studied: poly(N-isopropylacrylamide) (PNIPAM) and poly(N,N-diethylacrylamide) (PDEAAM) microgels, a P(NIPAM-co-DEAAM) copolymer microgel and a core-shell microgel with a PDEAAM core and a PNIPAM shell. These four different microgel systems were investigated in a D(2)O/CD(3)OD solvent mixture with a molar CD(3)OD fraction of x(MeOD) = 0.2 at 10 °C. The PNIPAM and the P(NIPAM-co-DEAAM) microgels are in the collapsed state under these conditions. They behave as solid diffusing objects with only very small additional contributions from internal motions. The PDEAAM particle is swollen under these conditions and mainly Zimm segmental dynamics can be detected in the intermediate scattering function at high momentum transfer. A cross-over to a collective diffusive motion is found for smaller q-values. The shell of the PDEAAM-core-PNIPAM-shell particle is collapsed, which leads to a static contribution to S(q,t); the core, however, is swollen and Zimm segmental dynamics are observed. However, the contributions of the Zimm segmental dynamics to the scattering function are smaller as compared to the pure PDEAAM particle. Interestingly the values of the apparent solvent viscosities inside the microgels as obtained from the NSE experiments are higher than for the bulk solvent. In addition different values were obtained for the PDEAAM microgel, and the PDEAAM-core of the PDEAAM-core-PNIPAM-shell particle, respectively. We attribute the strongly increased viscosity in the PDEAAM particle to enhanced inhomogeneities, which are induced by the swelling of the particle. The different viscosity inside the PDEAAM-core of the PDEAAM-core-PNIPAM-shell microgel could be due to a confinement effect: the collapsed PNIPAM-shell restricts the swelling of the PDEAAM-core and may modify the hydrodynamic interactions in this restricted environment inside the microgel.     

Influence of polyelectrolyte multilayer adsorption on the temperature sensitivity of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) (PNiPAM) microgels

The electrophoretic mobility and temperature-dependent particle size of poly(N-isopropylacrylamide) (PNiPAM) microgels after alternating adsorption of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium 4-styrenesulfonate) (PSS) have been determined. First a PNiPAM-co-acrylic acid (AAc) shell was added to the PNiPAM microgel, then PDADMAC and PSS were adsorbed alternately. The studies of the electrophoretic mobility revealed charge reversal when a polyelectrolyte (PE) layer was adsorbed. Particle size measurements revealed a strong influence of polyelectrolyte adsorption on the temperature-dependent particle swelling. The strong influence of the adsorbed polyelectrolyte on the particle size is in contrast to polyelectrolyte multilayer adsorption on rigid particles.     

N‐vinylcaprolactam‐based microgels for biomedical applications

Three types of poly(N‐vinylcaprolactam)‐based temperature‐sensitive microgel particles were synthesized by emulsion polymerization. The uptake of a model drug (calcein) into the particles was analyzed in terms of the amount of calcein absorbed and equilibrium–swelling degree. By incubating the microgels with primary neuronal cell cultures of embrionary rats, cell viability and biocompatibility tests were carried out. The results show that the driving force for the model drug to penetrate into the microgel particles is H‐bonding associations. On the other hand, cell death was microgel concentration and incubation period dependent. Microgels can be stored in a dried state and resuspended in water when necessary without changing their swelling–deswelling ability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1173–1181, 2010     

Polyelectrolyte conductivity

Using the de Gennes scaling model for the configuration of a polyelectrolyte chain in semidilute solution, we construct a simple model of AC conductivity for semidilute solutions of strongly charged polyelectrolytes without added salt. We compare the predictions of this model with literature data and new data on two polyelectrolytes with very different affinities for water. The sodium salt of sulfonated polystyrene in water is a hydrophobic polyelectrolyte (the uncharged monomer does not dissolve in water), where the chain is locally collapsed. The sodium salt of poly(2-acrylamido-2-methylpropanesulfonate), is a much more hydrophilic polyelectrolyte, making the chain quite expanded locally. The model describes the conductivity of both cases reasonably for concentrations below 10⁻² M (mol of monomer per liter). Deviations between experiment and theory at higher concentrations lead us to conclude that counterion condensation decreases as concentration is increased. This is qualitatively consistent with the experimental observation that the dielectric constant of the polyelectrolyte solution increases as polyelectrolyte is added. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2951–2960, 1997     

Calorimetric analysis of thermal phase transitions in functionalized microgels

Differential scanning calorimetry (DSC) is used to investigate the thermal phase transitions of a range of N-isopropylacrylamide (NIPAM)-based, carboxylic acid-functionalized microgels with well-defined radial and chain functional group distributions. The transition enthalpies of protonated microgels can be correlated with the hydrophobicity of the functional comonomer, while the transition enthalpies for ionized microgels can be correlated with the degree of microgel deswelling achieved across the thermal phase transition. The peak widths at half-height vary inversely with the average length of NIPAM blocks in each of the microgels, as calculated using a kinetic copolymerization model. Deconvolution of the asymmetric DSC thermograms is accomplished using a two-transition model, thought to relate to core-shell-type transitions induced by the significant local heterogeneities within the functionalized microgels. The ratio between the two transition temperatures of these deconvoluted peaks is a useful quantitative probe of the radial functional group distribution. An additional, low-temperature transition is also observed in the thermogram of the vinylacetic acid-functionalized microgel, indicative of the occurrence of local chain rearrangements prior to the macroscopic phase transition in this microgel. Complementary light scattering analysis suggests that microphase separation may account for this additional transition peak.