一种新型杯[4]芳烃的合成

本文通过对特丁基杯[4]芳烃的酚羟基烷基化和苯环特丁基位上的IPSO-硝化制备了一系列对硝基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(3a)、n-C~8H~1~7(3b)、n-C~1~2H~2~5(3c)和n-C~1~6H~3~3(3d)。^1HNMR表明所有新的杯[4]芳烃都具有锥形(cone)构象。     

Binucleating behaviour of a proximally-diphosphinated calix[4]arene

The long diphosphine 5,11-diphenylphosphanyl-25,26-dipropyloxy-27,28-bis(2-propenyloxy) calix[4]arene (cone) (5), in which the two phosphorus atoms are separated by a semi-rigid linking unit, was prepared in four steps starting from calix[4]arene. Reaction of 5 with AuCl(SEt(2)) or [RuCl(2)(p-cymene)](2) led to calixarenes bearing two metallated pendant arms, [5·(AuCl)(2)] and [5·{RuCl(2)(p-cymene)}(2)], respectively. In the presence of AgBF(4) or [Ni(C(5)H(5))(1,5-cyclooctadiene)]BF(4), diphosphine 5 displayed a marked tendency to form oligomeric material, but under high dilution conditions dimeric species were obtained selectively. The inability of 5 to form chelate complexes was further illustrated by its reaction with [PdCl(2)(1,5-cyclooctadiene)(2)], which led quantitatively to a rare complex in which a diphosphine spans across the dinuclear [PdCl(μ-Cl)(2)PdCl] unit.     

Electrochemical oxidation of a tetraester calix[4]arene

The electrochemical oxidation of tetraethyl ester p-tert-butyl calix[4]arene 1 was observed in acetonitrile solution at a platinum electrode, using either cyclic or square wave voltammetry. The oxidation occurred in a number of processes, with the lowest, process I at a peak potential of 1.10 V vs. Ferrocene, being the best defined response. This was attributed to the one-electron oxidation of the aryl ether functionality present in the calixarene and so should provide a route to the electrochemical detection of calixarenes in non-aqueous mixtures. The oxidation behaviour was dependent on the presence of alkali metal cations in solution. Shifts in the oxidation potentials observed were in good agreement with the order of selectivity for the alkali metal cations.     

Unsymmetrical calix[4]arene bisporphyrin Pacman

[structure: see text] The synthesis of a Pacman heterobisporphyrin associating an octaethyl porphyrinatozinc (ZnOEP) energy donor and a triaryl porphyrinatozinc (ZntPP) energy acceptor around a calix[4]arene spacer is described. Contrary to previous symmetrical architectures, correlations between the chromophores in the unsymmetrical calixarene bisporphyrin Pacman scaffold can now be observed in ROESY experiments. Independent of the excitation wavelength, only the luminescence of the ZntPP moiety was observed corresponding to quenching of the OEP moiety's emission.     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.     

Preferential axial protonation in a zwitterionic calix[4]arene

[structure: see text] Calixarene 3, substituted at two methylene bridges by dimethylamino groups, exists in the crystal and in polar solvents as a zwitterion, with the axial dimethylamino group protonated.     

Supramolecular interaction between water-soluble calix[4]arene and ATP--the catalysis of calix[4]arene for hydrolysis of ATP

The catalysis effect of water-soluble calix[4]arene C[4] (calix[4]arene-5,11,17,23-tetrasulfonate) on hydrolysis of ATP in aqueous solution was studied by HPLC. Using laser photolysis and pulse radiolysis, the supramolecular interaction between water-soluble calix[4]arene and ATP was investigated.     

Nanoencapsulation of calix[4]arene inclusion complexes

A hexameric resorcinarene nanocapsule in wet CDCl3 forms inclusion complexes of calix[4]arene with tetramethylammonium and trimethylsulfoxonium cations to give highly stable Russian-doll-type multicomponent assemblies. The 2D NOESY experiments revealed the size of the assembly, the close proximity of the encapsulated calix[4]arene molecule to the resorcinarene molecules of the capsule, and the inclusion of the tetramethylammonium cation in the calix[4]arene cavity.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Luminescent lanthanoid complexes of a tetrazole-functionalised calix[4]arene

p-t-Butylcalix[4]arene functionalised at the lower rim with two tetrazole moieties is found to be a useful receptor for lanthanoid cations. The luminescence of the resulting complexes can be controlled by addition of base, with emission achieved in the visible and infrared regions.     

Study on thermal decomposition of calix[6]arene and calix[8]arene

Thermal decomposition kinetics of calix[6]arene (C6) and calix[8]arene (C8) were studied by Thermogravimetry analysis (TG) and Differential thermal analysis (DTA). TG was done under static air atmosphere with dynamic heating rates of 1.0, 2.5, 5.0, and 10.0 K min⁻¹. Model-free methods such as Friedman and Ozawa–Flynn–Wall were used to evaluate the kinetic parameters such as activation energy (E _a) and pre-exponential factors (ln A). Model-fitting method such as linear regression was used for the evaluation of optimum kinetic triplets. The kinetic parameters obtained are comparable with both the model-free and model-fitting methods. Within the tested models, the thermal decomposition of C6 and C8 are best described by a three dimensional Jander’s type diffusion. The antioxidant efficiency of C6 and C8 was tested for the decomposition of polypropylene (PP).     

Ion-induced FRET on-off in fluorescent calix[4]arene

A novel calix[4]arene bearing one 2,3-naphthocrown-6 and two coumarin amide units at the lower rim in partial-cone conformation was synthesized as a colorimetric and FRET-based fluorometric sensor for F(-) and Cs(+) ions. Intramolecular FRET from the naphthalene emission to the coumarin absorption affords high fluorescence selectivity toward F(-) and Cs(+) ions.     

Exclusive self-assembly of a polar dimeric capsule between tetraurea calix[4]pyrrole and tetraurea calix[4]arene

The exclusive self-sorting observed in the self-assembly process between tetraurea benzyl calix[4]pyrroles and tetraurea tolyl calix[4]arene to afford unprecedented hybrid dimeric capsules with polar interiors is described. The coencapsulation of a solvent molecule with an organic guest yields four particle aggregates in which the guests are confined and restricted into single hemispheres due to the polar requirements of the internal cavity.     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Helical aquatubes of calix[4]arene di-methoxycarboxylic acid

Two trimeric units of calix[4]arene di-methoxycarboxylic acid form a six-pointed star architecture that, in turn, generates triple helical aquatubes which intermesh between themselves by aromatic-aromatic interdigitation of the macrocycle.     

Synthesis of upper rim calix[4]arene carcerands

The synthesis of novel tetra-olefinic calix[4]arene carcerands is described using a synthetic strategy involving palladium catalysed Heck coupling followed by imine formation.     

Calcium-selective electrode based on a calix[4]arene tetraphosphine oxide

A new ligand capable of producing calcium-selective electrodes with excellent characteristics is presented. The ligand (1) is a calix[4]arene bearing phosphine oxide ligating groups on the lower rim and this is the first report that such ligands can discriminate in favour of calcium ions against magnesium ions and the alkali metal ions. This calcium selectivity is in complete contrast to the behaviour of the well-known calix[4]arene tetraester derivatives (such as 2) which are selective for sodium against other alkali metal ions and group II ions. Electrodes based on PVC membranes incorporating ligand 1 display almost nernstian slopes and excellent selectivity against common interferants, including magnesium (log K(Ca,Mg)(pot)). The electrodes have demonstrated effective lifetimes of at least 7 weeks (duration of the study) and very fast response times.