Determination of water (moisture) and dry matter in animal feed, grain, and forage (plant tissue) by Karl Fischer titration: collaborative study

A Karl Fischer method for determining water (dry matter) in animal feed and forages was collaboratively studied. Water was extracted from animal feed or forage material into methanol-formamide (1 + 1) directly in the Karl Fischer titration vessel by high-speed homogenization. The water was titrated at 50 degrees C with one-component Karl Fischer reagent based on imidazole. Ten blind samples were sent to 9 collaborators in the United States, Canada, and Germany. The within-laboratory relative standard deviation (repeatability) ranged from 1.14 to 6.99% for water or from 0.09 to 0.56% for dry matter. Among-laboratory (including within-) relative standard deviation (reproducibility) ranged from 5.35 to 10.73%, or from 0.44 to 0.77% for dry matter. The authors recommend that the method be adopted as Official First Action by AOAC INTERNATIONAL. A comparable alternative extraction procedure using boiling methanol is also recommended for Official First Action.     

Youden analysis of Karl Fischer titration data from an interlaboratory study determining water in animal feed, grain, and forage

Data from a recent interlaboratory study of the determination of water (moisture) in animal feed, grain, and forage (plant tissue) by Karl Fischer titration were re-analyzed using Youden plots. The purpose was to show the unique ability these plots possess of separating random and systematic errors visually while providing numerical estimates of the precision and the systematic error of the method. Furthermore, the usefulness of the technique is underscored because AOAC INTERNATIONAL allows the use of matched pairs in collaborative studies to obtain estimates of repeatability and reproducibility.     

Conversion of distiller's grain into fuel alcohol and a higher-value animal feed by dilute-acid pretreatment

Over the past three decades ethanol production in the United States has increased more than 10-fold, to approx 2.9 billion gal/yr (mid-2003), with ethanol production expected to reach 5 billion gal/yr by 2005. The simultaneous coproduction of 7 million t/yr of distiller's grain (DG) may potentially drive down the price of DG as a cattle feed supplement. The sale of residual DG for animal feed is an important part of corn dry-grind ethanol production economics; therefore, dry-grind ethanol producers are seeking ways to improve the quality of DG to increase market penetration and help stabilize prices. One possible improvement is to increase the protein content of DG by converting the residual starch and fiber into ethanol. We have developed methods for steam explosion, SO₂, and dilute-sulfuric acid pretreatment of DG for evaluation as a feedstock for ethanol production. The highest soluble sugar yields (∼77% of available carbohydrate) were obtained by pretreatment of DG at 140°C for 20 min with 3.27 wt% H₂SO₄. Fermentation protocols for pretreated DG were developed at the bench scale and scaled to a working volume of 809 L for production of hydrolyzed distiller's grain (HDG) for feeding trials. The pretreated DG was fermented with Saccharomyces cerevisiae D₅A, with ethanol yields of 73% of theoretical from available glucans. The HDG was air-dried and used for turkey-feeding trials. The inclusion of HDG into turkey poult (as a model non-ruminant animal) diets at 5 and 10% levels, replacing corn and soybean meal, showed weight gains in the birds similar to controls, whereas 15 and 20% inclusion levels showed slight decreases (−6%) in weight gain. At the conclusion of the trial, no negative effects on internal organs or morphology, and no mortality among the poults, was found. The high protein levels (58–61%) available in HDG show promising economics for incorporation of this process into corn dry-grind ethanol plants.     

Crude fat, hexanes extraction, in feed, cereal grain, and forage (Randall/Soxtec/submersion method): collaborative study

A method for determining crude fat in animal feed, cereal grain, and forage (plant tissue) was collaboratively studied. Crude fat was extracted from the animal feed, cereal grain, or forage material with hexanes by the Randall method, also called the Soxtec method or the submersion method. The use of hexanes provides for an alternative to diethyl ether for fat extractions. The proposed submersion method considerably decreases the extraction time required to complete a batch of samples compared to Soxhlet. The increase in throughput is very desirable in the quest for faster turnaround times and the greater efficiency in the use of labor. In addition, this method provides for reclamation of the solvent as a step of the method. The submersion method for fat extraction was previously studied for meat and meat products and was accepted as AOAC Official Method 991.36. Fourteen blind samples were sent to 14 collaborators in the United States, Sweden, Canada, and Germany. The within-laboratory relative standard deviation (repeatability) ranged from 1.23 to 5.80% for crude fat. Among-laboratory (including within) relative standard deviation (reproducibility) ranged from 1.88 to 14.1%. The method is recommended for Official First Action.     

Crude fat, diethyl ether extraction, in feed, cereal grain, and forage (Randall/Soxtec/submersion method): collaborative study

A method for determining crude fat in animal feed, cereal grain, and forage (plant tissue) was collaboratively studied. Crude fat was extracted from the animal feed, cereal grain, or forage material with diethyl ether by the Randall method, also called the Soxtec method or the submersion method. The proposed submersion method considerably decreases the extraction time required to complete a batch of samples. The increase in throughput is very desirable in the quest for faster turnaround times and the greater efficiency in the use of labor. In addition, this method provides for reclamation of the solvent as a step of the method. The submersion method for fat extraction was previously studied for meat and meat products and was accepted as AOAC Official Method 991.36. Fourteen blind samples were sent to 12 collaborators in the United States, Sweden, Canada, and Germany. The within-laboratory relative standard deviation (repeatability) ranged from 1.09 to 9.26% for crude fat. Among-laboratory (including within) relative standard deviation (reproducibility) ranged from 1.0 to 21.0%. The method is recommended for Official First Action.     

Determination of zearalenone in cereal grains, animal feed, and feed ingredients using immunoaffinity column chromatography and liquid chromatography: interlaboratory study

A method using immunoaffinity column chromatography (IAC) and liquid chromatography (LC) for determination of zearalenone in cereal grains, animal feed, and feed ingredients was collaboratively studied. The test portion is extracted by shaking with acetonitrile-water (90 + 10, v/v) and sodium chloride. The extract is diluted and applied to an immunoaffinity column, the column is washed with water or phosphate-buffered saline or methanol-water (30 + 70, v/v), and zearalenone is eluted with methanol. The eluate is evaporated, the residue is dissolved in mobile phase and analyzed by reversed-phase LC with fluorescence detection. The presence of zearalenone can be confirmed using an alternate excitation wavelength or diode array detection. Twenty samples were sent to 13 collaborators (8 in Europe, 2 in the United States, one in Japan, one in Uruguay, and one in Canada). Eighteen samples of naturally contaminated corn, barley, wheat, dried distillers grains, swine feed, and dairy feed were analyzed as blind duplicates, along with blank corn and wheat samples. The analyses were done in 2 sample sets with inclusion of a spiked wheat control sample (0.1 mg/kg) in each set. Spiked samples recoveries were 89-116%, and for the 18 naturally contaminated samples, RSDr values (within-laboratory repeatability) ranged from 6.67 to 12.1%, RSDR values (among-laboratory reproducibility) ranged from 12.5 to 19.7%, and HorRat values ranged from 0.61 to 0.90.     

Determination of sulfamethazine in swine and cattle feed by reversed-phase liquid chromatography with post-column derivatization: collaborative study

A liquid chromatographic (LC) method for the analysis of sulfamethazine (SMT) in complete swine and cattle feed was collaboratively studied. The method uses post-column derivatization with dimethylaminobenzaldehyde and detection at 450 nm. To 5g finely ground feed, extractant (0.2N HCl + 1.5% diethylamine in 25% methanol), and internal standard solutions are added, and the SMT is extracted by shaking for 1 h. Clarified extract (high-level sample extract diluted to a target concentration of ca 5.5 microg/mL) is chromatographed on a Cla reversed-phase LC column with acetonitrile-2% acetic acid (17 + 83) mobile phase. Sulfamerazine is used as an internal, or surrogate standard to correct for variable recovery of sulfamethazine from a variety of feed matrixes. Six Youden matched-pair samples were sent to 10 collaborators in Korea, Canada, and the United States. Label claims on the commercial feeds ranged from 0.0077 to 0.22% SMT. The SMT mean recovery as determined from the 5 samples with known analyte content was 99.8%. The within-laboratory relative standard deviation (repeatability) ranged from 0.28 to 4.72%. Among-laboratory (including within-laboratory) relative standard deviation (reproducibility) ranged from 1.26 to 4.87%. The authors recommend the method for AOAC INTERNATIONAL Official First Action status.     

微波消解-ICP-AES 法测定乌梅中铁、锰、铜、锌

四川野生乌梅是药食兼优食物,在中医药方面已广泛应用,但作为保健食品的资源利用还有待进一步开发。乌梅中的微量元系含量与其药效及营养保健作用有关。本文应用微波消解-ICP-AES法同时测定了乌梅中Fe、Mn、Cu、Zn,选择了最佳测定条件,并探讨了乌梅中所含4种人体必需微量元素的药理功能。     

Determination of aristolochic acid I in botanicals and dietary supplements potentially contaminated with aristolochic acid I using LC-UV with confirmation by LC/MS: collaborative study

An interlaboratory study was conducted to evaluate a method for the determination of aristolochic acid I, also known as aristolochic acid A, at levels > 2.00 microg/g in botanical species and dietary supplements potentially contaminated with aristolochic acid I. Aristolochic acid I was extracted from various matrixes with aqueous acetonitrile. The amount of aristolochic acid I present was determined by liquid chromatography (LC) using an ultraviolet (UV) detector with confirmation by LC/mass spectrometry (MS). Thirteen blind duplicates were successfully analyzed by 10 collaborators, and aristolochic acid I was successfully confirmed in 1 blind duplicate by 8 collaborators. For repeatability, the relative standard deviation (RSD(r)) ranged from 1.72 to 16.3% and for reproducibility, the RSDR ranged from 5.42 to 19.8%. HorRat values were not applicable for 2 materials but varied from 0.7 to 1.8 for 11 materials. Each collaborating laboratory had calibration curves with correlation coefficients > 0.998. In addition, all of the collaborators that conducted the confirmation were able to verify the identity of aristolochic acid I using LC/MS/MS (using either ion trap or triple quad).     

Determination by glyphosate and aminomethylphosphonic acid in crops by capillary gas chromatography with mass-selective detection: collaborative study.

A collaborative study was conducted to validate a method for the determination of glyphosate and aminomethylphosphonic acid (AMPA) in crops. The analytes are extracted from crops with water, and the crude extracts are then subjected to a cation exchange cleanup. The analytes are derivatized by the direct addition of the aqueous extract into a mixture of heptafluorobutanol and trifluoroacetic anhydride. The derivatized analytes are quantitated by capillary gas chromatography with mass-selective detection (MSD). The collaborative study involved 13 laboratories located in 5 countries; 12 laboratories returned valid data sets. The crops tested were field corn grain, soya forage, and walnut nutmeat at concentrations of 0.050, 0.40, and 2.0 mg/kg. The study used a split-level pair replication scheme with blindly coded laboratory samples. Twelve materials were analyzed, including 1 control and 3 split-level pairs for each matrix, 1 pair at each nominal concentration. For glyphosate, the mean recovery was 91%, the average intralaboratory variance, the repeatability relative standard deviation (RSDr), was 11%, and the interlaboratory variance, the reproducibility relative standard deviation (RSDR), was 16%. For AMPA, the mean recovery was 87%, the RSDr was 16%, and the RSDR was 25% at mg/kg levels.     

Determination of monensin, narasin, and salinomycin in mineral premixes, supplements, and animal feeds by liquid chromatography and post-column derivatization: collaborative study

A liquid chromatographic (LC) method for the analysis of monensin, narasin, and salinomycin in mineral premixes, supplements, and complete animal feeds at medicating and trace levels was collaboratively studied. The method uses methanol-water (90 + 10) extraction with mechanical shaking for 1 h, filtration, and dilution if necessary. Determination of the 3 ionophores is by reversed-phase LC using post-column derivatization with vanillin and detection at 520 nm. Suspect positive trace-level products and medicated feeds containing unexpected ionophores are confirmed by hexane extraction or post-column derivatization with dimethylaminobenzaldehyde (DMAB). Twenty-five test samples of medicated feeds, supplements, and mineral and drug premixes, and 9 test samples for trace-level analysis were sent to 11 collaborators in Bulgaria, Czech Republic, Portugal, France, The Netherlands, United States, and Canada. Acceptable results were received from 10 laboratories. For the medicated complete feeds, supplements, and mineral premixes, RSDr values (within-laboratory repeatability) ranged from 2.5 to 5.2%, RSDR values (among-laboratory reproducibility) ranged from 2.7 to 6.8%, and HorRat values ranged from 0.31 to 1.30. For the drug premixes, the result variability was excessive and HorRat values ranged from 2.27 to 14.1. For the trace-level test samples, all laboratories correctly identified the analytes and did not report any false positives. RSDr values ranged from 1.3 to 9.5%, RSDR values ranged from 5.2 to 13.1%, and HorRat values ranged from 0.4 to 0.97.     

Fast quantitative analysis of boric acid by gas chromatography-mass spectrometry coupled with a simple and selective derivatization reaction using triethanolamine

A fast, selective, and sensitive GC-MS method has been developed and validated for the determination of boric acid in the drinking water by derivatization with triethanolamine. This analytic strategy successfully converts the inorganic, nonvolatile boric acid B(OH)₃ present in the drinking water to a volatile triethanolamine borate B(OCH₂CH₂)₃N in a quantitive manner, which facilitates the GC measurement. The SIM mode was applied in the analysis and showed high accuracy, specificity, and reproducibility, as well as reducing the matrix effect effectively. The calibration curve was obtained from 0.01 μg/mL to 10.0 μg/mL with a satisfactory correlation coefficient of 0.9988. The limit of detection for boric acid was 0.04 μg/L. Then the method was applied for detection of the amount of boric acid in bottled drinking water and the results are in accordance with the reported concentration value of boric acid. This study offers a perspective into the utility of GC-MS as an alternate quantitative tool for detection of B(OH)₃, even for detection of boron in various other samples by digesting the boron compounds to boric acid.     

Determination of fat, moisture, and protein in meat and meat products by using the FOSS FoodScan Near-Infrared Spectrophotometer with FOSS Artificial Neural Network Calibration Model and Associated Database: collaborative study

A collaborative study was conducted to evaluate the repeatability and reproducibility of the FOSS FoodScan near-infrared spectrophotometer with artificial neural network calibration model and database for the determination of fat, moisture, and protein in meat and meat products. Representative samples were homogenized by grinding according to AOAC Official Method 983.18. Approximately 180 g ground sample was placed in a 140 mm round sample dish, and the dish was placed in the FoodScan. The operator ID was entered, the meat product profile within the software was selected, and the scanning process was initiated by pressing the "start" button. Results were displayed for percent (g/100 g) fat, moisture, and protein. Ten blind duplicate samples were sent to 15 collaborators in the United States. The within-laboratory (repeatability) relative standard deviation (RSD(r)) ranged from 0.22 to 2.67% for fat, 0.23 to 0.92% for moisture, and 0.35 to 2.13% for protein. The between-laboratories (reproducibility) relative standard deviation (RSD(R)) ranged from 0.52 to 6.89% for fat, 0.39 to 1.55% for moisture, and 0.54 to 5.23% for protein. The method is recommended for Official First Action.     

Determination of arsenic, cadmium, cobalt, chromium, lead, molybdenum, nickel, and selenium in fertilizers by microwave digestion and inductively coupled plasma-optical emission spectrometry detection: collaborative study

There is increasing regulatory interest in the non-nutritive metals content of fertilizer materials, but at present there is no consensus analytical method for acid digestion and instrument detection of those elements in fertilizer matrixes. This lack of method standardization has resulted in unacceptable variability of results between fertilizer laboratories performing metals analysis. A method has been developed using microwave digestion with nitric acid at 200 degrees C, followed by inductively coupled plasma-optical emission spectrometry instrument detection, for the elements arsenic, cadmium, cobalt, chromium, molybdenum, nickel, lead, and selenium. The method has been collaboratively studied, and statistical results are here reported. Fourteen collaborators were sent 62 sample materials in a blind duplicate design. Materials represented a broad cross section of fertilizer types, including phosphate ore, manufactured phosphate products, N-P-K blends, organic fertilizers, and micro-nutrient materials. As much as possible within the limit of the number of samples, materials were selected from different regions of the United States and the world. Limit of detection (LOD) was determined using synthetic fertilizers consisting of reagent grade chemicals with near zero levels of the non-nutritive elements, analyzed blindly. Samples with high iron content caused the most variability between laboratories. Most samples reasonably above LOD gave HorRat values within the range 0.5 to 2.0, indicating acceptable method performance according to AOAC guidelines for analyses in the mg/kg range. The method is recommended for AOAC Official First Action status.     

Determination of copper and iron using [S,S']-ethylenediaminedisuccinic acid as a chelating agent in wood pulp by capillary electrophoresis.

A capillary electrophoresis (CE) method is described for the simultaneous determination of copper and iron after complexation with a readily biodegradable chelating agent, [S,S']-ethylenediaminedisuccinic acid (EDDS), in wood pulp. CE separation was performed in a fused-silica capillary (50 microm i.d.; total length, 65 cm) with an electrolyte containing 25 mM borate buffer and 0.5 mM CTAB at pH 7.0 and an applied voltage of -25 kV. The samples were introduced by applying a 50 mbar pressure for 2 s, and detection of the complexes was monitored at 245 nm. The methodology performance of the methods was evaluated in terms of the linearity, limit of detection (LOD), limit of quantitation (LOQ) and reproducibility. The applicability of the method was demonstrated for the analysis of copper and iron in wood pulp.     

Determination of copper, iron, manganese, lead and cadmium in automatically wet-digested animal tissue by graphite-furnace atomic-absorption spectrometry with zeeman background correction

An efficient wet digestion method is described which allows the determination of various elements in animal tissues. Copper, iron, manganese, lead and cadmium in one dilution of the digested sample can be determined by means of graphite-furnace atomic-absorption spectrometry, with Zeeman background correction. Tests with the National Bureau of Standards Bovine Liver SRM as reference gave analytical results, obtained with calibration graphs as well as by the standard-addition method, which agreed well with the certified values.     

Convenient synthesis of unsymmetrical organochalcogenides using organoboronic acids with dichalcogenides via cleavage of the S-S, Se-Se, or Te-Te bond by a copper catalyst

This article describes the methodology for a copper-catalyzed preparation of numerous monochalcogenides from dichalcogenides with organoboronic acids. Unsymmetrical diorgano-monosulfides, selenides, and tellurides can be synthesized by the coupling of dichalcogenides with aryl- or alkylboronic acids using a copper catalyst in air. The present reaction can take advantage of both organochalcogenide groups on dichalcogenide.     

Determination of free nitrilotriacetic acid in environmental water samples by ion chromatography with potentiometric and amperometric detection with a copper electrode

An ion-chromatographic method is described for the analysis of free nitrilotriacetic acid in water samples. Separations are achieved on a polymer-based anion-exchange column with 6 mM nitric acid as eluent. Both potentiometric and amperometric detection have been applied using metallic copper as the indicator electrode. Detection limits are at about 500 ng injected in the potentiometric mode and 100 ng in the amperometric mode. On-line sample preconcentration is possible for volumes up to 2 ml of river water samples. The response of the detector to other aminopolycarboxylic and aminopolyphosphonic acids has been investigated.     

A study of the kinetics and mechanism of amidation of 4-nitrobenzoic acid with ammonia,catalyzed by boric acid in the presence of polyethylene glycol PEG-400

Kinetics of the reaction of 4-nitrobenzoic acid with ammonia, catalyzed by the system constituted by boric acid and PEG-400 poly(ethylene glycol), was studied. A catalysis mechanism was suggested, which consists in original synthesis of incomplete polyethylene glycol borate esters, formation on their basis of 4-nitrobenzoic acid borate esters, and their further amidation with ammonia.