Rearrangement reaction of the hydroxyl group of ω-hydroxy-alkyltriphenyl phosphonium bromides

No molecular ion peak from the Electron Impact lonization of eight co-hydroxyalkyltriphenyl phosphonium bromides(Ph3P (CH2)nOHBr-,n=2-6,8-10)can be found,except a part of some relative powerful fragment ions can be observed only.Each compound forms a very characteristic ion(O=PPbj-1) at m/z 277 through hydroxyl rearrangement reaction.The intensity of this ion is closely related with the size of the carbon chain of hydroxyalkyl and with temperature of ion source and temperature of sample probe.The above rearrangement reaction and the reaction to form ion at m/z 262 take place simultaneously,thus leading to strong competition.At n=2,ion at m/z 277 is the most powerful and becomes continuously the base peak.At n=3 and n=4,the intensity of ion at m/z 262 reaches the maximum,and is always the base peak,and the relative abundance of m/z 277 is only around 2%.At n=5,6,8,9,10,m/z 277 becomes base peak when the temperature of probe is below 300℃.But,when the temperature increases from 300℃to 350℃,m/z 262 sud     

Simultaneous quantification of metformin and glipizide in human plasma by high‐performance liquid chromatography–tandem mass spectrometry and its application to a pharmacokinetic study

A selective, sensitive and rapid high‐performance liquid chromatography–tandem mass spectrometry (HPLC‐MS/MS) method was developed and validated to determine metformin and glipizide simultaneously in human plasma using phenacetin as internal standard (IS). After one‐step protein precipitation of 200 μL plasma with methanol, metformin, glipizide and IS were separated on a Kromasil Phenyl column (4.6 × 150 mm, 5 µm) at 40°C with an isocratic mobile phase consisting of methanol–10 mmol/L ammonium acetate (75:25, v/v) at a flow rate of 0.35 mL/min. Electrospray ionization source was applied and operated in the positive mode. Multiple reaction monitoring using the precursor → product ion combinations of m/z 130 → m/z 71, m/z 446 → m/z 321 and m/z 180 → m/z 110 were used to quantify metformin, glipizide and IS, respectively. The linear calibration curves were obtained over the concentration ranges 4.10–656 ng/mL for metformin and 2.55–408 ng/mL for glipizide. The relative standard deviation of intra‐day and inter‐day precision was below 10% and the relative error of accuracy was between ?7.0 and 4.6%. The presented HPLC‐MS/MS method was proved to be suitable for the pharmacokinetic study of metformin hydrochloride and glipizide tablets in healthy volunteers after oral administration. Copyright © 2012 John Wiley & Sons, Ltd.     

Identification of isobaric product ions in electrospray ionization mass spectra of fentanyl using multistage mass spectrometry and deuterium labeling

Isobaric product ions cannot be differentiated by exact mass determinations, although in some cases deuterium labeling can provide useful structural information for identifying isobaric ions. Proposed fragmentation pathways of fentanyl were investigated by electrospray ionization ion trap mass spectrometry coupled with deuterium labeling experiments and spectra of regiospecific deuterium labeled analogs. The major product ion of fentanyl under tandem mass spectrometry (MS/MS) conditions (m/z 188) was accounted for by a neutral loss of N‐phenylpropanamide. 1‐(2‐Phenylethyl)‐1,2,3,6‐tetrahydropyridine (1) was proposed as the structure of the product ion. However, further fragmentation (MS³) of the fentanyl m/z 188 ion gave product ions that were different from the product ion in the MS/MS fragmentation of synthesized 1, suggesting that the m/z 188 product ion from fentanyl includes an isobaric structure different from the structure of 1. MS/MS fragmentation of fentanyl in deuterium oxide moved one of the isobars to 1 Da higher mass, and left the other isobar unchanged in mass. Multistage mass spectral data from deuterium‐labeled proposed isobaric structures provided support for two fragmentation pathways. The results illustrate the utility of multistage mass spectrometry and deuterium labeling in structural assignment of isobaric product ions. Copyright © 2010 John Wiley & Sons, Ltd.     

Gas‐fragmentation study of the novel synthetic zwitterionic drug 3‐methyl‐9‐(2‐oxa‐2λ5‐2H‐1,3,2‐oxazaphosphorine‐2‐cyclohexyl)‐3,6,9‐triazaspiro[5,5]undecane chloride (SLXM‐2) by electrospray ionization tandem mass spectrometry

The zwitterionic drug 3‐methyl‐9‐(2‐oxa‐2λ5‐2H‐1,3,2‐oxazaphosphorine‐2‐cyclohexyl)‐3,6,9‐triazaspiro[5,5]undecane chloride (SLXM‐2) is a novel synthetic compound which has shown anticancer activity and low toxicity in vivo. In this study, the various gas‐phase fragmentation routes were analyzed by electrospray ionization mass spectrometry (positive ion mode) in conjunction with tandem mass spectrometry (ESI‐MSⁿ) for the first time. In ESI‐MS the fragment ion at m/z 289 (base peak) was formed by loss of the chlorine anion from the zwitterionic precursor SLXM‐2. The fragment ion at m/z 232 was formed from the ion at m/z 289 by loss of 1‐methylaziridine. The detailed gas‐phase collision‐induced dissociation (CID) fragmentation mechanisms obtained from the various precursor ions extracted from the zwitterionic SLXM‐2 drug was obtained by tandem mass spectrometry analyses. Copyright © 2010 John Wiley & Sons, Ltd.     

The renaissance of high-energy CID for structural elucidation of complex lipids: MALDI-TOF/RTOF-MS of alkali cationized triacylglycerols

Triacylglycerols were analyzed as cationized species (Li⁺, Na⁺, K⁺) by high-energy CID at 20 keV collisions utilizing MALDI-TOF/RTOF mass spectrometry. Precursor ions, based on [M+Li]⁺-adduct ions exhibited incomplete fragmentation in the high and low m/z region whereas [M+K]⁺-adducts did not show useful fragmentation. Only sodiated precursor ions yielded product ion spectra with structurally diagnostic product ions across the whole m/z range. The high m/z region of the CID spectra is dominated by abundant charge-remote fragmentation of the fatty acid substituents. In favorable cases also positions of double bonds or of hydroxy groups of the fatty acid alkyl chains could be determined. A-type product ions represent the end products of these charge-remote fragmentations. B- and C-type product ions yield the fatty acid composition of individual triacylglycerol species based on loss of either one neutral fatty acid or one sodium carboxylate residue, respectively. Product ions allowing fatty acid substituent positional determination were present in the low m/z range enabling identification of either the sn-1/sn-3 substituents (E-, F-, and G-type ions) or the sn-2 substituent (J-type ion). These findings were demonstrated with synthetic triacylglycerols and plant oils such as cocoa butter, olive oil, and castor bean oil. Typical features of 20 keV CID spectra of sodiated triacylglycerols obtained by MALDI-TOF/RTOF MS were an even distribution of product ions over the entire m/z range and a mass accuracy of ±0.1 to 0.2 u. One limitation of the application of this technique is mainly the insufficient precursor ion gating after MS1 (gating window at 4 u) of species separated by 2 u.     

Newborn screening for 3‐hydroxy‐3‐methylglutaric aciduria using direct analysis in real‐time mass spectrometry

A novel method utilizing ambient thermal desorption ionization with a direct analysis in real‐time source integrated with mass spectrometry (DART‐MS) was established and applied to the rapid analysis of 3‐hydroxy‐3‐methylglutaric (3‐HMG) acid in the neonatal urine. Instrument parameter settings were optimized to obtain high sensitive and accurate determination of 3‐HMG acid. The use of helium gas heated to temperature of 400°C was observed to permit deprotonation, 3‐HMG acid producing an abundant (M‐H)^? (m/z 161) in the negative ion mode. The calibration curve was determined to be linear over the range of 0.05‐5 mg/L, with the correlation coefficient r = 0.9988 and the relative standard deviations (n = 6) in the range of 1.5‐11.8%. The limit of detection was 0.002 mg/L, and the limit of quantitation was 0.007 mg/L. The recoveries ranged from 88.0% to 123.1%. Four urine samples from patients and four simulated urine samples were investigated. The results of DART‐MS were in agreement with the values determined using established methods at the hospitals. The proposed method demonstrated significant potential in the application of the high‐throughput screening in newborn screening.     

GC-MS determination and optimization of extraction of N,N′-dimethyl-N,N′-diphenylcarbamide from building materials

N,N’-dimethyl-N,N’-diphenylcarbamide (centralite) extracted from building materials was quantitated using ion trap GC-MS detection technique. Both linearity and standard deviation of the calibration curve were dependent on the conditions of the mass spectral detection. The most precise calibration has been achieved by quantification of a mass ion not participating in secondary reactions and which is produced via single fragmentation. The best recovery of centralite was obtained after either 30 min of normal extraction with toluene at 60 °C or 10 min of ultrasonic extraction with chloroform at room temperature. Using the latter method resorption processes might cause decrease in efficiency of the recovery at longer extraction time. Received: 3 July 1998 / Revised: 5 November 1998 / Accepted: 26 January 1999     

Quantification of polygalasaponin F in rat plasma using liquid chromatography–tandem mass spectrometry and its pharmacokinetics application

A rapid and highly selective liquid chromatography–tandem mass spectrometric (LC‐MS/MS) method for determination of polygalasaponin F (PF) in rat plasma was developed and validated. The chromatographic separation was achieved on a reverse‐phase Zorbax SB‐C₁₈ column (150 × 4.6 mm, 5 µm), using 2 mm ammonium acetate (pH adjusted to 6.0 with acetic acid) and acetonitrile (25:75, v/v) as a mobile phase at 30 °C. MS/MS detection was performed using an electrospray ionization operating in positive ion multiple reaction monitoring mode by monitoring the ion transitions from m/z 1091.5 → 471.2 (PF) and m/z 700.4 → 235.4 (internal standard), respectively. The calibration curve showed a good linearity in the concentration range 0.0544–13.6 µg/mL, with a limit of quantification of 0.0544 µg/mL. The intra‐ and inter‐day precisions were <9.7% in rat plasma. The method was validated as per US Food and Drug Administration guidelines and successfully applied to pharmacokinetic study of PF in rats. Copyright © 2015 John Wiley & Sons, Ltd.     

Formation of the bisulfite anion (HSO3–, m/z 81) upon collision‐induced dissociation of anions derived from organic sulfonic acids

In the negative‐ion collision‐induced dissociation mass spectra of most organic sulfonates, the base peak is observed at m/z 80 for the sulfur trioxide radical anion (SO₃^–·). In contrast, the product‐ion spectra of a few sulfonates, such as cysteic acid, aminomethanesulfonate, and 2‐phenylethanesulfonate, show the base peak at m/z 81 for the bisulfite anion (HSO₃^–). An investigation with an extensive variety of sulfonates revealed that the presence of a hydrogen atom at the β‐position relative to the sulfur atom is a prerequisite for the formation of the bisulfite anion. The formation of HSO₃^– is highly favored when the atom at the β‐position is nitrogen, or the leaving neutral species is a highly conjugated molecule such as styrene or acrylic acid. Deuterium‐exchange experiments with aminomethanesulfonate demonstrated that the hydrogen for HSO₃^– formation is transferred from the β‐position. The presence of a peak at m/z 80 in the spectrum of 2‐sulfoacetic acid, in contrast to a peak at m/z 81 in that of 3‐sulfopropanoic acid, corroborated the proposed hydrogen transfer mechanism. For diacidic compounds, such as 4‐sulfobutanoic acid and cysteic acid, the m/z 81 ion can be formed by an alternative mechanism, in which the negative charge of the carboxylate moiety attacks the α‐carbon relative to the sulfur atom. Experiments conducted with deuterium‐exchanged and deuterium‐labeled analogs of sulfocarboxylic acids demonstrated that the formation of the bisulfite anion resulted either from a hydrogen transfer from the β‐carbon, or from a direct attack by the carboxylate moiety on the α‐carbon. Copyright © 2012 John Wiley & Sons, Ltd.     

Simple, Sensitive, High-Throughput Method for the Quantification of Mitragynine in Rat Plasma Using UPLC-MS and Its Application to an Intravenous Pharmacokinetic Study

A simple, sensitive and rapid ultra-performance liquid chromatography-mass spectrometry (UPLC-MS) method was developed and validated for the quantification of mitragynine in rat plasma using amitriptyline hydrochloride as an internal standard. Sample preparation involved a one-step liquid?Cliquid extraction using methyl t-butyl ether. Mitragynine was separated on an Acquity UPLC^? BEH HILIC column using isocratic elution with a mobile phase of 10 mM ammonium formate buffer containing 0.1% formic acid:acetonitrile (15:85, v/v). At a flow rate of 0.2 mL min^?1, the retention time of mitragynine was found to be 1.3 min. Ionization was performed in the positive ion electrospray mode. The selected mass-to-charge (m/z) ratio transition of mitragynine ion [M + H]⁺ used in the selected ion recording (SIR) was 399.1. The calibration curve was found to be linear over a concentration range of 1?C5,000 ng mL^?1 (r = 0.999) with a lower limit of quantification (LLOQ) of 1 ng mL^?1. Intra- and inter-day assay variations were found to be less than 15%. The extraction recoveries ranged from 85?C93% at the three concentrations (2, 400 and 4,000 ng mL^?1) in rat plasma. This method was successfully used to quantify mitragynine in rat plasma following intravenous administration of the compound.     

ESI-MS differential fragmentation of positional isomers of sulfated oligosaccharides derived from carrageenans and agarans

We have prepared a number of isomeric red seaweed galactan-derivative sulfated oligosaccharides to determine whether there were diagnostic differences among the isomeric mass spectra obtained using ESI CID MS/MS (triple quadrupole instrument). Fragmentation of the single or multicharged molecular ions from di-, tetra-, and hexasaccharides indicated that the relative positioning of the sulfate groups and type of monosaccharide unit affect the rate of cleavage of the glycosidic bonds. We also performed a comparative [M-Na]⁻ fragmentation study of positional isomers of sulfated disaccharides that present all four monosulfation possibilities on the galactopyranosidic ring. In this case, negative-ion ESI CID MS/MS approach gave diagnostic product ions from cross-ring cleavages along with the same main B₁ ion (from sulfated Gal_p), at m/z 241, for all isomers. The isomeric disaccharides were also submitted to increased spray energy conditions inducing in-source fragmentation; preformed B₁ ions were then fragmented to give similar product ions as those found in [M-Na]⁻ analysis. Evaluation of the relative abundances mainly for cross-ring fragment ions at m/z 138, 139, 151, 153 allowed clear distinction among the members of the disaccharide series. The different ratios for m/z 151/153 ions were consistent with the predominance of m/z 153 being related to the cases when the bond involved in the cleavage process links a sulfated carbon. A quadrupole ion trap instrument (MSⁿ analysis) was also utilized to compare the results obtained with the triple quadrupole instrument.     

Rapid and robust confirmation and quantification of 11‐nor‐Δ9‐tetrahydrocannabinol‐9‐carboxylic acid (THC‐COOH) in urine by column switching LC‐MS‐MS analysis

A method for the rapid and robust confirmation of 11‐nor‐?9‐tetrahydrocannabinol‐9‐carboxylic acid (THCA) in urine involving basic hydrolysis with NaOH and direct injection of the hydrolysate in a column‐switching LC‐MS‐MS system was developed and validated. THCA‐d3 was used as internal standard. Detection was performed in negative‐ion mode by monitoring the transitions from the [M‐CO₂]‐ ion m/z 299.2→245.2 and and m/z 299.2→191.1 that were found to provide a better signal‐to‐noise ratio than the transition from the pseudomolecular ion at m/z 343. The high sensitivity of detection enabled the injection of a small volume (10 µl) of the NaOH hydrolysate which, together with the applied column switching system, proved to confer ruggedness to the method and to avoid the deterioration of the instrumental apparatus despite the large amount of inorganic ions in the hydrolysate. The LLOQ was established at 5 ng/ml, and the LLOD was calculated as 0.2 ng/ml (S/N =3). The method was submitted to thorough validation including evaluation of the calibration range (5–500 ng/ml), accuracy and precision, matrix effects, overall process efficiency, autosampler stability, carryover and cross‐talk, and 10‐times reduction of sample volume (0.1 ml). Proof of applicability was obtained by direct comparison with the reference GC‐MS method in use in the lab (the R² between the two methods was 0.9951). Copyright © 2012 John Wiley & Sons, Ltd.     

Single and double hydrogen migration in the fragmentation of 3-methyl-2-butyl trifluoroacetate

Three of the main oxygen-containing fragments resulting from 3-methyl-2-butyl trifluoroacetate (11) had been identified previously as the 1-triflnoroacetoxyethyl cation (m/z 141, 12, product of simple cleavage), and the products of single (m/z 142) and double hydrogen transfer (m/z 143, protonated ethyl trifluoroacetate). Collisionally activated dissociation of m/z 142 and the isotopomers resulting from 11-2-d, 11-1-d₃, 11-5,6-d₆, and 11-¹⁸O₂ has established that m/z 142 is the oxygen protonated 1-trifluoroacetoxyethyl free radical (17) formed by hydrogen shift irom a γ-methyl group to oxygen in the molecular ion, rather than in a complex (18) between 12 and the 2-propyl free radical, as expected based on a mechanistic model existing in the literature. The second hydrogen transferred originates in the other γ-methyl group; its migration may occur, but does not have to, in the complex between 17 and a molecule of propene, prior to dissociation of the two fragments. Collision-activated dissociation has now shown that the m/z 140 ion observed in the spectrum is the molecular ion of vinyl trifluoroacetate, possibly formed by a hydrogen transfer from 12 to the 2-propyl radical in the complex 18. The hydrogen migration to oxygen exhibits no isotope effect, whereas the transfers to carbon atoms exhibit small primary and α secondary kinetic isotope effects. Exclusive migration of the tertiary hydrogen from C(3) occurs in the formation of 2-methylbutene cation radical (m/z 70) from the molecular ion. The hydrocarbon ion fragments and the heteroatom-containing fragments are formed from 11 by disjoint pathways.     

Differentiation of the Stereochemistry and Anomeric Configuration for 1-3 Linked Disaccharides Via Tandem Mass Spectrometry and <Superscript>18</Superscript>O-labeling

Collision-induced dissociation (CID) of deprotonated hexose-containing disaccharides (m/z 341) with 1–2, 1–4, and 1–6 linkages yields product ions at m/z 221, which have been identified as glycosyl-glycolaldehyde anions. From disaccharides with these linkages, CID of m/z 221 ions produces distinct fragmentation patterns that enable the stereochemistries and anomeric configurations of the non-reducing sugar units to be determined. However, only trace quantities of m/z 221 ions can be generated for 1–3 linkages in Paul or linear ion traps, preventing further CID analysis. Here we demonstrate that high intensities of m/z 221 ions can be built up in the linear ion trap (Q3) from beam-type CID of a series of 1–3 linked disaccharides conducted on a triple quadrupole/linear ion trap mass spectrometer. ¹⁸O-labeling at the carbonyl position of the reducing sugar allowed mass-discrimination of the “sidedness” of dissociation events to either side of the glycosidic linkage. Under relatively low energy beam-type CID and ion trap CID, an m/z 223 product ion containing ¹⁸O predominated. It was a structural isomer that fragmented quite differently than the glycosyl-glycolaldehydes and did not provide structural information about the non-reducing sugar. Under higher collision energy beam-type CID conditions, the formation of m/z 221 ions, which have the glycosyl-glycolaldehyde structures, were favored. Characteristic fragmentation patterns were observed for each m/z 221 ion from higher energy beam-type CID of 1–3 linked disaccharides and the stereochemistry of the non-reducing sugar, together with the anomeric configuration, were successfully identified both with and without ¹⁸O-labeling of the reducing sugar carbonyl group.     

Use of liquid chromatography/tandem mass spectrometry and online databases for identification of phosphocholines and lysophosphatidylcholines in human red blood cells

In this work a systematic strategy integrating liquid chromatography/tandem mass spectrometry (LC/MS/MS) and online databases was developed to identify phosphocholines (PC) and lysophosphatidylcholines (LPC) in human red blood cells (RBCs). First of all, the neutral loss scan of 59 and the precursor ion scan of m/z 184 were performed to find out the possible lipids with phosphocholine head‐group structure in RBCs. The acquired [M+H]⁺ and [M+Na]⁺ adduct ions were then identified online using the Human Metabolome Database (HMDB) and the LIPID MAPS, which were then further confirmed by their MS/MS fragmentation. Based on the comparison of chemical structures of the detected PC and LPC with their corresponding MS/MS fragmentation pathways, several new diagnostic fragments or fragmentation pathway were found. These include, (1) the neutral losses of 183 could be used as a diagnostic fragmentation to discriminate PC and LPC; (2) product ions at m/z 104 could be used to distinguish LPC and their sn‐2 isomers; (3) fragment ions at m/z 184 are characteristic fragmentation that could be used for discrimination of sodiated ions [M+Na]⁺ and protonated ions [M+H]⁺, especially for co‐eluted PC or LPC with a molecular weight difference of 22. The structures of the above‐mentioned fragment ions were confirmed by quadrupole time‐of‐flight (Q‐TOF) MS. Furthermore, a PC and LPC focused LC/MS semi‐quantification approach was also developed and validated. This approach could be useful for future lipidomic study. Copyright © 2009 John Wiley & Sons, Ltd.     

Liquid chromatography/electrospray ionization-tandem mass spectrometry: a tool for the identification and quantitication of abscisic acid glucosyl ester

Summary LC/ESI-tandem MS techniques have been applied to the analysis of endogenous abscisic acid glucosyl ester (ABA-GE). By parent ion scanning (m/z 263) and constant neutral loss (162u) experiments, endogenous ABA-GE could be identified in extracts from wilted leaves ofPhaseolus vulgaris L. cv. Jutta. Using ABA-[6′-D₂]GE as internal standard, the endogenous content of ABA-GE in wilted leaves ofPhaseolus vulgaris L. could be estimated by parent ion scanning ofm/z 263. From the signals of the [M-H]⁻-ions of ABA-GE (m/z 425) and ABA-[6′-D₂]GE (m/z 427) obtained, the amount of the endogenous conjugate was calculated to be 280±9 ng ABA-GE/g plant material. This is the first accurate method for the direct quantification of ABA-GE as intact compound at endogenous levels. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Determination of Pregabalin in Human Plasma Using LC-MS-MS

A bioanalytical method has been developed and validated for determination of pregabalin in human plasma. The analytical method consists in the precipitation of plasma sample with trichloro acetic acid (20% v/v solution in water), followed by the determination of pregabalin by an LC-MS-MS method using gabapentin as internal standard. Separation was achieved on a Gemini C₁₈ 50 mm × 2.0 mm (3 μm) column with an isocratic mobile phase consisting of methanol–water (98:2, v/v) with 0.5% v/v formic acid. Protonated ions formed by a turbo ionspray in positive mode were used to detect analyte and internal standard. The MS-MS detection was by monitoring the fragmentation of 160.2→55.1 (m/z) for pregabalin and 172.2→67.1 (m/z) for gabapentin on a triple quadrupole mass spectrometer. The assay was calibrated over the range 0.1–15.0 μg mL⁻¹ with correlation coefficient of 0.9998. Validation data showed intra-batch (n = 6) CV% ≤ 6.89 and RE (%) between −4.17 and +3.08 and inter-batch (n = 18) CV% < 9.09 and RE (%) between −3.0 and +10.00. Mean extraction recovery were 80.45–89.12% for three QC samples and 87.56% for IS. Plasma samples were stable for three freeze–thaw cycles, or 24 h ambient storage, or 1 and 3 months storage at −20 °C. Processed sample (ready for injection) were stable up to 72 h at autosampler (4 °C). This method has been used for analyzing plasma samples from a bioequivalence study with 18 volunteers.     

Determination of Doxapram Hydrochloride in Rabbit Plasma by LC-MS-MS and Its Application

A sensitive and selective liquid chromatography tandem mass spectrometry (LC-MS-MS) method for determination of doxapram hydrochloride in rabbit plasma was developed. After addition of urapidil hydrochloride as internal standard (IS), protein precipitation by 10% trichloroacetic acid in methanol (w/v) was used as sample preparation. Chromatographic separation was achieved on a Zorbax SB-C18 (2.1 mm × 50 mm, 3.5 μm) column with acetonitrile–water as mobile phase with gradient elution. Electrospray ionization (ESI) source was applied and operated in positive ion mode; multiple reaction monitoring (MRM) mode was used for quantification using target fragment ions m/z 378.9 → 291.8 for doxapram hydrochloride and m/z 387.9 → 204.6 for the IS. Calibration plots were linear over the range of 2–1000 ng mL^?1 for doxapram hydrochloride in plasma. Lower limit of quantitation (LLOQ) for doxapram hydrochloride was 2 ng mL^?1. Mean recovery of doxapram hydrochloride from plasma was in the range 83.7–91.5%. RSD of intra-day and inter-day precision were less than 9%, respectively. This method is simple and sensitive enough to be used in pharmacokinetic research for determination of doxapram hydrochloride in rabbit plasma.     

How does a CC double bond cleave in the gas phase? Fragmentation of protonated ketotifen in mass spectrometry

In the literature, it is reported that the protonated ketotifen mainly undergoes C?C double bond cleavage in electrospray ionization tandem mass spectrometry (ESI‐MS/MS); however, there is no explanation on the mechanism of this fragmentation reaction. Therefore, we carried out a combined experimental and theoretical study on this interesting fragmentation reaction. The fragmentation of protonated ketotifen (m/z 310) always generated a dominant fragment ion at m/z 96 in different electrospray ionization mass spectrometers (ion trap, triple quadrupole and linear trap quadrupole (LTQ)‐orbitrap). The mechanism of the generation of this product ion (m/z 96) through the C?C double bond cleavage was proposed to be a sequential hydrogen migration process (including proton transfer, continuous two‐step 1,2‐hydride transfer and ion‐neutral complex‐mediated hydride transfer). This mechanism was supported by density functional theory (DFT) calculations and a deuterium labeling experiment. DFT calculations also showed that the formation of the product ion m/z 96 was most favorable in terms of energy. This study provides a reasonable explanation for the fragmentation of protonated ketotifen in ESI‐MS/MS, and the fragmentation mechanism is suitable to explain other C?C double bond cleavage reactions in mass spectrometry. Copyright © 2016 John Wiley & Sons, Ltd.     

Electron impact ionization mass spectra of 6-carbamoyloxy-3-oxo-3,6-dihydro-2H-pyran and 5H-pyrano[3,2-d]-oxazole-2,6-dione derivatives

The electron impact ionization mass spectra of 6-carbamoyloxy-3-oxo-3,6-dihydro-2H-pyrans show a weak molecular ion peak and a base peak of m/z 84 resulting from a retro Diels-Alder fragmentation. The bicyclic system 5H-pyrano[3,2-d]oxazole-2,6-dione gives a characteristic fragmentation pattern with a very stable fragment of oxazolenone.