A Cyclization–Rearrangement Cascade for the Synthesis of Structurally Complex Chiral Gold(I)–Aminocarbene Complexes

A facile synthesis of chiral cyclic alkyl aminocarbene–gold(I) complexes from gold‐free 1,7‐enyne substrates was developed. The novel cyclization–rearrangement reaction sequence is triggered by the addition of (Me₂S)AuCl to different 1,7‐enynes and leads to structurally unique carbene–gold(I) complexes in high yields. These novel complexes are catalytically active and inhibit the proliferation of different human cancer cell lines.     

Gold(I) complexes bearing P-pyrrole phosphine ligands: Synthesis and catalytic activity towards cycloisomerization of 1,6-enynes

P-pyrrole phosphines (R₂Ppyr), in which a pyrrole group is directly bonded to the phosphorus atom, act as monodentate k-P ligands towards gold(I) center to afford either neutral or cationic mononuclear complexes as well as neutral dinuclear complexes. All of these new gold(I) complexes have been structurally characterized and their first uses in catalysis have demonstrated their effectiveness as precatalysts for the enyne cycloisomerization reactions.     

Gold(I) Complexes Nuclearity in Constrained Ferrocenyl Diphosphines: Dramatic Effect in Gold‐Catalyzed Enyne Cycloisomerization

Di‐tert‐butylated‐bis(phosphino)ferrocene ligands bearing phosphino substituents R (R=phenyl, cyclohexyl, iso‐propyl, mesityl, or furyl) allow tuning the selective formation of Au(I) halide complexes. Thus, dinuclear linear two‐coordinate, but also rare mononuclear trigonal three‐coordinate and tetrahedral four‐coordinate complexes were formed upon tuning of the conditions. Both Au(I) chloride and rarer Au(I) iodide complexes were synthesized, and their X‐ray diffraction analysis are reported. The significance of the control of structure and nuclearity in Au(I) complexes is further illustrated herein by its strong effect on the efficiency and selectivity of gold‐catalysed cycloisomerization. Cationic linear digold(I) bis(dicyclohexylphosphino) ferrocenes outperform other catalysts in the demanding regioselective cycloisomerization of enyne sulphonamides into cyclohexadienes. Conversely, tetrahedral and trigonal cationic monogold(I) complexes were found incompetent for enyne cycloaddition. We used the two‐coordinate linear electron‐rich Au(I) complex 2 b (R=Cy) to extend the scope of selective intramolecular cycloaddition of different 1,6‐enyne sulfonylamines with high activity and excellent selectivity to the endo cyclohexadiene products.     

Quantum chemical simulation of 1,3-dipolar cycloaddition of nitrones to alkenes and their (η6-arene)(tricarbonyl)-chromium complexes

Charge distribution and frontier orbital energies of styrene, C,N-diphenylnitrone, and their (arene)-(tricarbonyl)chromium complexes were calculated by quantum chemical methods. The difference in the HOMO and LUMO energies of the chromium complexes was found to be smaller than in the free ligands, and the reactions with (arene)(tricarbonyl)chromium complexes were characterized by higher rate and selectivity.     

Gold(I)-catalyzed stereoselective cyclization of ortho alkynyl benzaldehyde chromium complexes with nucleophiles

Gold(I)-catalyzed cyclization of o-alkynyl benzaldehyde chromium complexes gave stereoselectively 1-anti- and syn-functionalized 1H-isochromene chromium complexes, respectively, depending on the nature of nucleophiles. Enantiomerically pure trans- and cis-1,3-dimethylisochromans were stereoselectively prepared from a single planar chiral o-(1-propynyl)benzaldehyde chromium complex.     

A study of (binap)(enyne)tetracarbonyldicobalt(0) complexes

Four (binap)(enyne)tetracarbonyldicobalt(0) complexes have been synthesised and their reactivity monitored by variable temperature (31)P NMR spectroscopy. Formation of (binap)dicarbonylhydridocobalt(-1) 12 occurred at temperatures between 35 and 55 degrees C, depending on the nature of the alkene and alkyne components of the enyne. The structure of 12 was determined by X-ray crystallography, and its presence under Pauson-Khand reaction conditions was verified by NMR spectroscopy.     

Investigations of chromium(III), manganese(III), tin(II) and lead(II) dithiocarbamate complexes

Piperidine-, morpholine-4-, N-methylpiperazine-4- and thiornorpholine-4-carbodithioate complexes of chromium(III), manganese(III), tin(II) and lead(II) are prepared and characterized by chemical analyses, spectroscopic methods (I.R. and electronic spectra), magnetic susceptibilities, conductivity measurements and mass spectra. The complexes are of the type M(R₂dtc)n, where n is the oxidation number of the metal ion. Where possible a tentative stereochemistry of the complexes is discussed on the basis of the results obtained. In all the complexes the dithiocarbamate ligands show bidentate behaviour.     

Disodium-1,8-dihydroxy-naphthalene-3,6-disulphonate (chromotropic salt) as a reagent in inorganic analysis

Summary The compound disodium-1,8-dihydroxy-naphthalene-3,6-disulphonate (sodium salt of chromotropic acid) is employed as a colorimetric reagent for titanium. It is also known to produce coloured complexes with chromium(VI), vanadium and uranium. In the present paper the formation of colour with forty metallic ions has been studied qualitatively, in neutral as well as in alkaline and acidic media. It has been found that the reagent yields coloured complexes with mercury(I), tin(IV), platinum(IV), gold(III), tellurium(VI), molybdenum(VI), iron(III), aluminium(III), chromium(III), and uranyl(II) besides those recorded above.The colour reactions are particularly sensitive to uranyl(II), iron(III), mercury(I), tin(IV), gold(III) und molybdenum(VI).     

Thermal behavior of tetradentate Schiff base chromium(III) complexes

Thermal analytical behavior of eight chromium(III) complexes with N,N′-bis(salicylidene)ethylenediamine (salen) Schiff bases, Cr(salen), has been investigated regarding their thermal stability and thermal decomposition pathways. Thus, the ligands and the respective chromium(III) complexes of salen-type Schiff bases derived from salicylaldehyde and its 5-chloro, 5-bromo, 5-methoxy, 5-nitro, 3,5-dicloro, 3,5-dibromo, and 3,5-diiodosalicylaldehyde were synthesized, characterized, and submitted to TG/DTG, DTA, and TG–FTIR evolved gas analysis. The number of steps and, in particular, the starting temperature of decomposition of these complexes was dependent of the ligand nature. The gaseous products evolved during the thermal decomposition of these compounds were identified by TG–FTIR.     

(η6-arene) tricarbonylchromium complex in organic synthesis: stereoselective alkylation at benzylic position of (η6-Arene) tricarbonylchromium

Benzylic acetates and the corresponding free alcohols of (η⁶- arene) tricarbonylchromium complexes are alkylated stereoselectively with trialkylaluminum or diethylzinc to give exo-alkyl chromium complexes in high yield.     

The Stabilizing Effects in Gold Carbene Complexes

Bonding and stabilizing effects in gold carbene complexes are investigated by using Kohn–Sham density functional theory (DFT) and the intrinsic bond orbital (IBO) approach. The π‐stabilizing effects of organic substituents at the carbene carbon atom coordinated to the gold atom are evaluated for a series of recently isolated and characterized complexes, as well as intermediates of prototypical 1,6‐enyne cyclization reactions. The results indicate that these effects are of particular importance for gold complexes especially because of the low π‐backbonding contribution from the gold atom.     

New planar chiral P,N-ligands containing tricarbonyl(arene)chromium for enantioselective asymmetric hydroboration of styrenes

Optically active (1,2-disubstituted arene) chromium tricarbonyl complexes 2A–2D with a pyridyl and a phosphorus group in the two ortho benzylic positions have been stereoselectively synthesized from a commercially available (+)-(4,6-O-benzylidene)methyl-α-d-glucopyranoside. These chromium complexes have been used as chiral ligands in the preparation of rhodium catalysts for the hydroboration of styrene derivatives. High enantioselectivities were observed in the hydroboration of vinylarenes.     

Synthesis, 13C NMR and IR spectroscopic studies of gold(I) complexes of imidazolidine-2-thione and its derivatives

The gold(I) complexes of imidazolidine-2-thione and its derivatives were synthesized and their ¹³C NMR and IR spectroscopic studies were carried out. When gold(III) was reacted with the ligands using a 1:4 metal to ligand ratio, gold(III) was reduced to gold(I), the bis complexes of the general formula AuL_nX (where n = 2) were formed. However, when gold(III) was reduced to gold(I) by a reducing agent followed by an addition of the ligand to an aqueous or methanolic solution of gold(I), only mono complexes of the type AuLX were obtained. The structures of the reported complexes are proposed on the basis of their spectroscopic measurements.     

Pentacarbonyl(organylphenoxycarben)-Komplexe des Chrom(0) und Wolfram(0)

Pentacarbonyl(acetoxyorganylcarbene) complexes of chromium(0) and tungsten(0) react with sodium phenolate to give pentacarbonyl(organylphenoxycarbene)chromium(0) and tungsten(0).     

Electroanalytical sensing of chromium(III) and (VI) utilising gold screen printed macro electrodes

We report the fabrication of gold screen printed macro electrodes which are electrochemically characterised and contrasted to polycrystalline gold macroelectrodes with their potential analytical application towards the sensing of chromium(III) and (VI) critically explored. It is found that while these gold screen printed macro electrodes have electrode kinetics typically one order of magnitude lower than polycrystalline gold macroelectrodes as is measured via a standard redox probe, in terms of analytical sensing, these gold screen printed macro electrodes mimic polycrystalline gold in terms of their analytical performance towards the sensing of chromium(III) and (VI), whilst boasting additional advantages over the macro electrode due to their disposable one-shot nature and the ease of mass production. An additional advantage of these gold screen printed macro electrodes compared to polycrystalline gold is the alleviation of the requirement to potential cycle the latter to form the required gold oxide which aids in the simplification of the analytical protocol. We demonstrate that gold screen printed macro electrodes allow the low micro-molar sensing of chromium(VI) in aqueous solutions over the range 10 to 1600 μM with a limit of detection (3σ) of 4.4 μM. The feasibility of the analytical protocol is also tested through chromium(VI) detection in environmental samples.     

Cross-coupling of arene–gold(III) complexes

The reactivity of electron-deficient arene–gold(III) complexes toward nucleophilic aromatic and heteroaromatic counterparts has been studied. 1-Methylindole proved to be the best reaction partner while trimethoxybenzenes did not react. The ancillary ligand on gold also influenced the reactivity in the order PPh₃>P^tBu₃>IPr. An oxidative cross-coupling starting from the corresponding gold(I) complexes in presence of hypervalent iodide oxidants was also studied.     

Synthesis,characterization and ethylene oligomerization and polymerization of 2-(1H-2-benzimidazolyl)-6-(1-(arylimino)ethyl)pyridylchromium chlorides

A series of N^N^N tridentate chromium complexes (C1–C6) bearing 2-(1H-2-benzimidazolyl)-6-(1-(arylimino)ethyl)pyridine derivatives was synthesized and characterized by elemental and spectroscopic analysis along with single-crystal X-ray crystallography. X-ray crystallographic analyses reveal chromium complex C1 as a distorted six-coordinated octahedral geometry. On treatment with modified methylaluminoxane (MMAO), the chromium complexes exhibited high activities for ethylene oligomerization (up to 1.50 × 10⁶ g mol⁻¹ (Cr) h⁻¹) and polymerization (up to 2.06 × 10⁶ g mol⁻¹ (Cr) h⁻¹) at 10 atm ethylene pressure. Various reaction parameters were investigated in detail, and less steric hindrance and electron-withdrawing substituents of ligands enhance the catalytic activities of their chromium complexes.     

Au(I)-catalyzed cycloisomerization of 1,5-enynes bearing a propargylic acetate: formation of unexpected bicyclo[3.1.0]hexene

The use of N-heterocyclic carbene (NHC) as a ligand in the gold(I)-catalyzed cycloisomerization of enyne results in the assembly of a new carbocyclic product.     

Gold(I) complexes bearing phosphole ligands: Synthesis and antimalarial activity

A series of gold(I)-monophosphole complexes have been synthesized and characterized. The introduction of a nitrogen moiety in the complex structure was envisioned either by choosing the bis(trifluoromethanesulfonyl)imidate ligand as the X-ligand or by preparing a new pyrrolidinophosphole ligand as the L-ligand. All the complexes have been evaluated in vitro for their antimalarial activity. These gold–phosphole complexes showed moderate activities with IC₅₀ values ranging from 9.7 to 24 μM against Plasmodium falciparum chloroquine-resistant strains.     

Selective gold(I)-catalyzed formation of tetracyclic indolines: a single transition structure and bifurcations lead to multiple products

Several alkynylindoles undergo gold(I)-catalyzed cyclization reactions to form a single isomer in each case. Density functional theory shows why this reaction is favored over the many possible regio- and stereoisomeric reaction pathways. This transformation involves a two-step no-intermediate mechanism with surface bifurcations leading to two or three products. Such bifurcations could explain reactivity in many gold(I)-catalyzed enyne cyclization reactions.