Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

A convenient synthesis of benzofuro[3,2-c]isoquinolines and naphtho[1′,2′:4,5]furo[3,2-c]isoquinolines

A convenient method for the preparation of benzofuro[3,2-c]isoquinoline derivatives is described. The condensation reaction of methyl 2-(chloromethyl)-benzoate with substituted salicylonitriles 7a-c and intramolecular cyclization of the resulting substituted methyl 2-[(2-cyanobenzyl)oxy]benzoates 10a-c using potassium tert-butoxide results in the substituted benzofuro[3,2-c]isoquinolin-5(6H)-ones 1a-c. The same sequence of reactions starting from 2-(chloromethyl)benzonitrile and compounds 7a-c gave substituted 5-aminobenzofuro[3,2-c]isoquinolines 13a-c. In addition, this method is useful for the synthesis of other heterocycles. For example, using 1-cyano-2-naphthol 16, instead of the salicylonitriles 7a-c, gives naphtho[1′,2′:4,5]furo[3,2-c]isoquinolines.     

Ni(II) and Cu(II) complexes of phenoxy-ketimine ligands: Synthesis,structures and their utility in bulk ring-opening polymerization (ROP) of l-lactide

Synthetic, structural and catalysis studies of Ni(II) and Cu(II) complexes of a series of phenoxy-ketimine ligands with controlled variations of sterics, namely 2-[1-(2,6-diethylphenylimino)ethyl]phenol (1a), 2-[1-(2,6-dimethylphenylimino)ethyl]phenol (1b) and 2-[1-(2-methylphenylimino)ethyl]phenol (1c), are reported. Specifically, the ligands 1a, 1b and 1c were synthesized by the TiCl₄ mediated condensation reactions of the respective anilines with o-hydroxyacetophenone in 21–23% yield. The nickel complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Ni(II) (2a) and {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Ni(II) (2b), were synthesized by the reaction of the respective ligands 1a and 1b with Ni(OAc)₂ · 4H₂O in the presence of NEt₃ as a base in 71–75% yield. The copper complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Cu(II) (3a), {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Cu(II) (3b) and {2-[1-(2-methylphenylimino)ethyl]phenoxy}₂Cu(II) (3c) were synthesized analogously by the reactions of the ligands 1a, 1b and 1c with Cu(OAc)₂ · H₂O in 70–87% yield. The molecular structures of the nickel and copper complexes 2a, 2b, 3a, 3b and 3c have been determined by X-ray diffraction studies. Structural comparisons revealed that the nickel centers in 2a and 2b are in square planar geometries while the geometry around the copper varied from being square planar in 3a and 3c to distorted square planar in 3b. The catalysis studies revealed that while the copper complexes 3a, 3b and 3c efficiently catalyze ring-opening polymerization (ROP) of l-lactide at elevated temperatures under solvent-free melt conditions, producing polylactide polymers of moderate molecular weights with narrow molecular weight distributions, the nickel counterparts 2a and 2b failed to yield the polylactide polymer.     

Synthesis and structural characterization of novel zinc(II) and cadmium(II) complexes with pyridine-phosphine chalcogenide ligands

New pyridine-phosphine chalcogenide ligands, tris[2-(2-pyridyl)ethyl]phosphine sulfide 1a and tris[2-(2-pyridyl)ethyl]phosphine selenide 1b, react with zinc(II) and cadmium(II) chlorides in EtOH at room temperature to afford complexes of compositions 2ZnCl₂·2L (2, L = 1a) and 3CdCl₂·2L (3a,b, L = 1a,b) in high yields. The solid-state structure of complexes 2, 3 has been proved by X-ray analysis data. Complex 2 is a centrosymmetric dimer, where two atoms of zinc are bonded by two bridging pyridine-phosphine sulfide ligands through N atoms. Complexes 3a,b exist as polymeric chains with each bridging ligand acting as a chelate N,S- or N,Se-donor to one cadmium(II) center and as a pyridine N-donor to the next cadmium(II) center.     

Intramolecularly donor-stabilized silenes: Part 5. Generation and conversion of 1-[2,6-bis(alkoxymethyl)phenyl]- and 1-(8-alkoxynaphthyl)-1,2,2-tris(trimethylsilyl)silenes

1-(8-Methoxy-1-naphthyl)-1,2,2-tris(trimethylsilyl)silene (10) and the 1-[2,6-bis(alkoxymethyl)phenyl]-1,2,2-tris(trimethylsilyl)silenes (12a-d) were generated by the reaction of (dichloromethyl)tris(trimethylsilyl)silane (1) with two molar equivalents of 8-methoxy-1-naphthyllithium or 2,6-bis(alkoxymethyl)phenyllithium (8a-d), respectively, but proved to be unstable. 10 was trapped with excess of the applied naphthyllithium reagent to give 1,1-bis(8-methoxy-1-naphthyl)-1-[bis(trimethylsilyl)methyl]-2,2,2-trimethyldisilane (11); and 12a-d underwent spontaneous conversions and formed two types of substituted 2-oxa-1-silaindane derivatives (13a,b and 14b-d). Whereas silenes with an intramolecular amine coordination are thermally stable compounds which can be isolated, the intramolecular coordination of an ether group to the electrophilic silene silicon atom does not provide a comparable stabilization to the SiC system and the respective derivatives generated were converted into resultant products.     

Gold(I) N-heterocyclic carbene based initiators for bulk ring-opening polymerization of l-lactide

Synthesis, structures, and catalysis studies of gold(I) complexes of N-heterocyclic carbenes namely, a di-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene], a mono-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene] and a non-functionalized [1,3-di-i-propyl-benzimidazol-2-ylidene], are reported. Specifically, the gold complexes, [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene]AuCl (1c), [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene]AuCl (2c), and [1,3-di-i-propyl-benzimidazol-2-ylidene]AuCl (3b), were prepared from the respective silver complexes 1b, 2b, and 3a by treatment with (SMe₂)AuCl in good yields following the commonly used silver carbene transfer route. The silver complexes 1b, 2b, and 3a were synthesized from the respective imidazolium halide salts by the reactions with Ag₂O. The N-heterocyclic carbene precursors, 1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazolium chloride (1a) and 1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazolium chloride (2a), were synthesized by the direct reactions of cyclohexene oxide and imidazole with chloroacetophenone and benzyl chloride respectively. The gold (1c, 2c, and 3b) and the silver (3a) complexes along with a new O-functionalized imidazolium chloride salt (1a) have been structurally characterized by X-ray diffraction. The structural studies revealed that geometries around the metal centers were almost linear in these gold and silver complexes. The gold (1c, 2c, and 3b) complexes efficiently catalyze ring-opening polymerization (ROP) of l-lactide under solvent-free melt conditions producing polylactide polymer of moderate to low molecular weights with narrow molecular weight distributions.     

Carbonyl complexes of manganese, rhenium and molybdenum with 2-pyridylimino acid ligands

[MBr(CO)₃{κ²(N,O)-pyca}] [M = Mn(1a), Re(1b), pyca = pyridine-2-carboxaldehyde] and [MoCl(η³-C₃H₄Me-2)(CO)₂{κ²(N,O)-pyca}] (1c) react with aminoacid β-alanine to give the corresponding iminopyridine complexes 2a-2c. The same method affords the iminopyridine derivatives from γ-aminobutyric acid (GABA) (3a-3c) and 3-aminobenzoic acid (4a-4c). For complexes 2a-2c, 3a, 3c and 4a, the solid state structures have been determined by X-ray crystallography, revealing interesting differences in their hydrogen-bonding patterns in solid state.     

Gamma-valerolactone-based solvents

Several γ-valerolactone (GVL) based solvents including methyl 4-methoxyvalerate (1a), ethyl 4-ethoxyvalerate (1b), tetramethylammonium 4-hydroxyvalerate (2a), tetrabutylammonium 4-hydroxyvalerate (2b), and cholinium 4-hydroxyvalerate (2c) were prepared and characterized.     

Half-sandwich η-arene–ruthenium(II) complexes bearing 1-alkyl(benzyl)-imidazo[4,5-f][1,10]-phenanthroline (IP) derivatives: the effect of alkyl chain length of ligands to catalytic activity

The reaction of bromoalkanes (R–Br; (3), R=C_nH_2n+1, n=4 (a), 8 (b), 12 (c),18 (d)) and bromobenzyl derivatives (R′–Br; (4), R′=CH₂C₆H₂(CH₃)₃-2,4,6 (a); CH₂C₆H(CH₃)₄-2,3,5,6 (b); CH₂C₆(CH₃)₅ (c)) with 1H-imidazo[4,5-f][1,10]-phenanthroline (IP)(L₂) gave the corresponding 1-R-imidazo[4,5-f][1,10]-phenanthroline (IPR)(L_3a–d) and 1-R′-imidazo[4,5-f][1,10]-phenanthroline(IPR')(L_4a–c) ligands, respectively. Treatment of L_3a–d and L_4a–d with [Ru(p-cymene)Cl₂]₂ led to the formation of [Ru(p-cymene)(IPR)Cl]Cl (RuL_3a–d) and [Ru(p-cymene)(IPR′)Cl]Cl (RuL_4a–c). New ruthenium(II) complexes RuL_3a–d and RuL_4a–c were characterized by elemental analysis, FTIR, UV–visible and NMR spectroscopy. In order to understand effects of these changes on the N-substituent of imidazol on IP and how they translate to catalytic activity, these new RuL₂, RuL_3a–d and RuL_4a–c were applied in the transfer hydrogenation of ketones by 2-propanol in presence of potassium hydroxide. The activities of the catalysts were monitored by NMR and GC analysis.     

Short-step syntheses and complexation properties of Z,Z-tribenzodidehydro- and all-Z-tribenzo[12]annulenes

Syntheses of all-Z-tribenzo[12]annulenes (1a-c) and Z,Z-tribenzodidehydro[12]annulenes (2a-c) by the reduction of the corresponding tribenzohexadehydro[12]annulenes 3a-c were carried out using a low valent titanium complex generated from Ti(O-i-Pr)₄ and i-PrMgCl. The unique structure of the first reduction products 2a-c as well as 1a-c was fully characterized. Complexation of these annulenes with silver(I) ions produces the corresponding silver complexes. Among them, the silver complexes of 2a-c exhibit interesting monomer-dimer equilibrium.     

Synthesis and self-assembly of novel calix[4]arenocrowns: formation of calix[4]areno[2]catenanes

A series of novel calix[4]arenocrowns 1a-c were efficiently synthesized by a one-pot reaction of calix[4]monohydroquinone diacetate 5 with ditosylate 6 and its analogues in the presence of sodium hydroxide. It was found that the calix[4]arenocrowns could form stable pseudorotaxane-type complexes 2a-c with paraquat, and further self-assemble into calix[4]areno[2]catenanes 3a-c with dicationic salt 8 and p-bis(bromomethyl)benzene.     

An efficient synthesis of benzofurans and their application in the preparation of natural products of the genus Calea

The intramolecular cyclization of the β-substituted olefins methyl 2-aryloxy-3-dimethylaminopropenoates 3a-3f catalyzed by Lewis acids leads to a short and novel synthesis of benzofurans 2a-2f. When the olefins 4-dimethylamino-3-aryloxy-3-buten-2-ones 4a-4f were used, the cyclization process was faster and provided the corresponding substituted 2-acetylbenzofurans 1a-1f. Among the latter, naturally occurring compounds calebertin (1a), caleprunin A (1b), and caleprunin B (1c) were prepared in good overall yields. These benzofurans were also obtained by direct treatment under MW irradiation of the precursors 1-aryloxypropan-2-ones 7a-7c with DMFDMA, followed by addition of the catalyst, resulting in a route that was one step shorter.     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

Rhodium(I) carbonyl complexes of quinoline carboxaldehyde ligands and their catalytic carbonylation reaction

The dimeric rhodium precursor [Rh(CO)₂Cl]₂ reacts with quinoline (a) and its three isomeric carboxaldehyde ligands [quinoline-2-carboxaldehyde (b), quinoline-3-carboxaldehyde (c), and quinoline-4-carboxaldehyde (d)] in 1:2 mole ratio to afford complexes of the type cis-[Rh(CO)₂Cl(L)] (1a-1d), where L = a-d. The complexes 1a-1d have been characterised by elemental analyses, mass spectrometry, IR and NMR (¹H, ¹³C) spectroscopy together with a single crystal X-ray structure determination of 1c. The X-ray crystal structure of 1c reveals square planar geometry with a weak intermolecular pseudo dimeric structure (Rh?Rh = 3.573 Å). 1a-1d undergo oxidative addition (OA) with different electrophiles such as CH₃I, C₂H₅I and I₂ to give Rh(III) complexes of the type [Rh(CO)(COR)Cl(L)I] {R = -CH₃ (2a-2d), R = -C₂H₅ (3a-3d)} and [Rh(CO)Cl(L)I₂] (4a-4d) respectively. 1b exhibits facile reactivity with different electrophiles at room temperature (25 °C), while 1a, 1c and 1d show very slow reactivity under similar condition, however, significant reactivity was observed at a temperature ∼40 °C. The complexes 1a-1d show higher catalytic activity for carbonylation of methanol to acetic acid and methyl acetate [Turn Over Frequency (TOF) = 1551-1735 h⁻¹] compared to that of the well known Monsanto’s species [Rh(CO)₂I₂]⁻ (TOF = 1000 h⁻¹) under the reaction conditions: temperature 130 ± 2 °C, pressure 33 ± 2 bar, 450 rpm and time 1 h. The organometallic residue of 1a-1d was also isolated after the catalytic reaction and found to be active for further run without significant loss of activity.     

Reactions of azulenes with 1,2-diaryl-1,2-ethanediols in methanol in the presence of hydrochloric acid: comparative studies on products, crystal structures, and spectroscopic and electrochemical properties

Although reaction of guaiazulene (1a) with 1,2-diphenyl-1,2-ethanediol (2a) in methanol in the presence of hydrochloric acid at 60 °C for 3 h under aerobic conditions gives no product, reaction of 1a with 1,2-bis(4-methoxyphenyl)-1,2-ethanediol (2b) under the same reaction conditions as 2a gives a new ethylene derivative, 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (3), in 97% yield. Similarly, reaction of methyl azulene-1-carboxylate (1b) with 2b under the same reaction conditions as 1a gives no product; however, reactions of 1-chloroazulene (1c) and the parent azulene (1d) with 2b under the same reaction conditions as 1a give 2-[3-(1-chloroazulenyl)]-1,1-bis(4-methoxyphenyl)ethylene (4) (81% yield) and 2-azulenyl-1,1-bis(4-methoxyphenyl)ethylene (5) (15% yield), respectively. Along with the above reactions, reactions of 1a with 1,2-bis(4-hydroxyphenyl)-1,2-ethanediol (2c) and 1-[4-(dimethylamino)phenyl]-2-phenyl-1,2-ethanediol (2d) under the same reaction conditions as 2b give 2-(3-guaiazulenyl)-1,1-bis(4-hydroxyphenyl)ethylene (6) (73% yield) and (Z)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1-phenylethylene (7) (17% yield), respectively. Comparative studies of the above reaction products and their yields, crystal structures, spectroscopic and electrochemical properties are reported and, further, a plausible reaction pathway for the formation of the products 3-7 is described.     

Formation of bis- and tris[2]catenanes via the cross-catenation of Pd(II)- and Pt(II)-linked coordination rings

We have demonstrated the self-assembly of linear oligo[2]catenanes via selective cross-catenation. A Pd(II)-linked double looped molecule 1 was transformed into the cyclic trimer c-(1)₃ through the catenation. When 1 was treated with a kinetically inert Pt(II)-linked single looped molecule 2a in aqueous media (1:1.2 DMSO/H₂O) at room temperature, linear oligo[2]catenanes of 2a-(1)_n-2a (n=1 and 2) were selectively obtained, because the kinetically inert Pt(II)-linked ring 2a is allowed to thread on only kinetically labile Pd(II)-linked ring of 1. The distribution of the oligomers depends on the monomer ratio of 1 to 2a. When the ratio of 1 to 2a was 1:2, bis[2]catenane 3a (2a-1-2a) was quantitatively assembled. When the ratio of 1 to 2a was 1:1, not only 3a but also tris[2]catenane 4 (2a-1-1-2a) was assembled. The ratio of 3a to 4 was carefully determined to be 1:1 by NMR. The lengths of 3a and 4 in an extended conformation were estimated by MD/MM2 simulation to be 3.6 and 5.4 nm, respectively.     

An unexpected formation of pyrazolopyrimidines during the attempted to obtain 5-substituted tetrazoles from carbonitriles

In this Letter, we described the synthesis of new 5-(5-amino-1-aryl-1H-pyrazole-4-yl)-1H-tetrazoles 2a–c from 5-amino-1-aryl-1H-pyrazole-4-carbonitriles 1a–c as well as the unexpected 1H-pyrazolo[3,4-d]pyrimidine derivatives 6a–c from 5-amino-1-aryl-3-methyl-1H-pyrazole-4-carbonitriles 4a–c, instead of 5-(5-amino-1-aryl-3-methyl-1H-pyrazole-4-yl)-1H-tetrazoles 5a–c as desired. In an attempt to obtain these tetrazole derivatives containing the methyl group at C3-position in the pyrazole ring, the amino group in 5-amino-1-(4-methoxyphenyl)-3-methyl-1H-pyrazole-4-carbonitrile 4c was protected by the reaction with sodium hydride and di-tert-butyl-dicarbonate (Boc). The tetrazole derivative 5c was synthesized from the protected compound 7c using analogue methodology to obtain 2a–c and 6a–c.     

Synthesis and properties of novel methanofullerenes having ethylthienyl and/or n-pentyl group for photovoltaic cells

Novel methanofullerenes 3 having ethylthienyl and/or n-pentyl groups were designed and synthesized for the purpose of developing new acceptors for an organic photovoltaic cell with higher performance than that of the [6,6]-phenyl-C₆₁-butylic acid methyl ester (PCBM) used as the standard acceptor. The electronic absorption spectra and cyclic voltammetry (CV) of 3, PCBM, and [6,6]-(thiophene-2-yl)-C₆₁-butylic acid methyl ester (ThCBM) were measured to estimate solubility and reduction potentials as characteristics of n-type semiconductor for organic photovoltaic devices. The CV measurements revealed reversible reduction waves for all of the methanofullerenes and the first reduction potentials of the n-pentyl-substituted 1-(5-ethylthiophene-2-yl)-[6,6]-methanofullerene[60] (3b) and 1-phenyl-[6,6]-methanofullerene[60] (3c) were negatively shifted compared to those of the corresponding terminal methyl ester-substituted homologues (3a and PCBM). The performances of photovoltaic devices consisting of 3b and 3c were slightly higher than those of PCBM.     

Synthesis and properties of 5-[bis(1-heteroazulen-3-yl)methylidene]pyrimidine-2,4,6(1,3,5H)-triones

The synthesis and properties of a novel type of 5-[bis(1-heteroazulen-3-yl)methylidene]pyrimidine-2,4,6(1,3,5H)-triones (13a-c) and (14a-c) are studied. The synthetic procedure is based on addition of bis(1-heteroazulen-3-yl)methyl cations with barbituric acid and subsequent oxidation by o-chloranil. Structural characteristics of 13a-c and 14a-c were clarified on inspection of the ¹³C NMR spectral data and X-ray crystal analysis. Based on the investigation of the UV-vis spectra of 13a-c and 14a-c and their protonated cations, conformational change of the heteroazulene-moiety and the barbituric acid-moiety is suggested. In the CV measurements of 13a-c and 14a-c, two reversible reduction waves are observed, indicating the stabilizing ability of heteroazulenes toward the corresponding radical and anion species. Furthermore, 13a-c and 14a-c exhibit one irreversible oxidation wave and the corresponding reduction wave appearing in a far negative region, which suggested a conformational change in the radical cation during the redox process. The conformational change is rationalized on the basis of the MO calculations.     

Stereoselective hydrostannation of substituted alkynes initiated by triethylborane and reactivity of bulky triorganotin hydrides

This paper reports the results obtained in a study on the radical hydrostannation of mono- and disubstituted alkynes with bulky triorganotin hydrides using triethylborane as initiator. The addition of trineophyl- (1), tris[(phenyldimethylsilyl)methyl]- (2), and 9-tripticyldimethyltin (3) hydride to eight alkynes was carried out at room temperature leading to vinylstannanes in good to excellent yields and, mostly, with complete stereoselectivity. The results obtained in a study on the relative reactivity of trineophyl- (1), tris[(phenyldimethylsilyl)methyl]- (2), 9-triptycyldimethyltin (3) hydrides, and tri-n-butyltin hydride (29) using the radical reactions between these hydrides and 6-bromo-1-hexene (28) are also reported. Full ¹H-, ¹³C-, and ¹¹⁹Sn NMR characteristics are included.