Synthesis of efficient blue and red light emitting phenanthroline derivatives containing both hole and electron transporting properties

Two phenanthroline derivatives containing a hole transporting triphenylamine and an electron transporting 1,3,4-oxadiazole unit have been prepared with high yield. UV-vis absorption and fluorescence measurement indicated they are high efficient light-emitting materials. The compounds are 6-(5-(4-N,N′-diphenylaminophenyl)-1,3,4-oxadiazol-2-yl) quinoxalino[2,3-f] phenanthroline (9, λ_max = 635 nm, 40% quantum yield), and 1-ethyl-2-(4-(5-(4-N,N′-diphenylaminophenyl)-1,3,4-oxadiazol-2-yl)phenyl)imidazo[4,5-f]phenanthroline (14, λ_max = 461 nm, 78% quantum yield). Preliminary study on electroluminescence for the two fluorescent dyes prepared from vacuum evaporation resulted in blue and red light emitting organic light emitting diodes (OLED).     

Thermotropic liquid‐crystalline poly(oxadiazole)s with poly(methylene) spacers: Preparation and extraordinary odd–even effect

A novel synthetic procedure for the preparation of poly(oxadiazole)s was developed with nucleophilic substitution of α,ω-alkanediols with oxadiazole-activated bisfluoride. Seven poly(oxadiazole)s were successfully prepared by the solution polymerization of 2,5-bis(4-fluorophenyl)-1,3,4-oxadiazole and various α,ω-alkanediols [HO (CH₂)_n OH, n = 5–10 or 12] in diphenyl sulfone at temperature greater than 230 °C with K₂CO₃ as a catalyst. The reduced viscosities of the poly(oxadiazole)s were 0.14–0.51 dL/g, and the decomposition temperatures were greater than 350 °C and decreased from 436 to 379 °C with increasing spacer length (n). Corresponding model compounds, consisting of two terminal mesogenic 2,5-bisphenyl-1,3,4-oxadiazole units and central poly(methylene) spacers, were also prepared for comparison. Both the polymers and model compounds exhibited an extraordinary odd–even effect: odd ones showed higher transition temperatures (melting and clearing temperatures). With differential scanning calorimetry, polarized optical microscopy (POM), and X-ray diffraction, we found that the nematic mesophase was the only texture in the melts except for the polymers with longer methylene units (n = 9), in which smectic mesophases were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 293–301, 2002     

Polarization effects in mesogenic isoxazoles and 1,3,4-oxadiazoles

Four new series of unsymmetric isoxazoles and 1,3,4-oxadiazoles were prepared, characterized and their mesomorphic properties investigated. Isoxazoles were obtained by condensation–cyclization of β-diketones with hydroxylamine hydrochloride in refluxing THF, while 1,3,4-oxadiazoles were obtained from hydrazine-carboxylate in refluxing POCl₃. Two single crystallographic structures were determined by X-ray crystallographic analysis. A correlated dimeric structure was formed by H-bonds in isoxazoles 1a (n=6), leading to a more elongated structure required for the formation of mesophases. All compounds 1a–c formed N, SmA or/and SmC phases. In contrast, compounds 1d exhibited columnar phases, and an N_cell=14.6 obtained from powder XRD data indicated that a correlated structure formed by four molecules was probably induced in Col_h phases. The better mesomorphic behavior formed in 1a than 1b might be attributed to stronger intermolecular interactions and higher polarization induced in isoxazoles 1a.     

Synthesis and comparative study of the heterocyclic rings on liquid crystalline properties of 2,5-aryl-1,3,4-oxa(thia)diazole derivatives containing furan and thiophene units

A series of heterocyclic liquid crystalline compounds containing 1,3,4-oxadiazole/thiadiazole, furan and thiophene units were synthesised and characterised by means of electrospray ionisation-mass spectrometry (ESI-MS), high-resolution mass spectroscopy (HRMS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR. The thermal behaviours were investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The effect of the 1,3,4-oxadiazole, 1,3,4-thiadiazole, furan, thiophene and benzene rings on the liquid crystalline properties was discussed briefly in context with the geometrical and electronic factors. The results showed that the tendency to form mesophases follows the sequence: 1,4-disustituted benzene >2,5-disubstituted thiophene >2,5-disustituted furan and 1,3,4-thiadiazole >1,3,4-oxadiazole.     

New metallomesogens derived from unsymmetric 1,3,4-thiodiazoles: synthesis, single crystal structure, mesomorphism, and optical properties

A series of copper(II) complexes 1 derived from unsymmetric 1,3,4-thiadiazoles 2 exhibiting mesogenic properties are reported. All the precursors 2 and 3 exhibited smectic A or/and smectic C phases, whereas, copper complexes formed nematic, SmA or SmC phases. The mesophases formed by derivatives 2 and 3 were probably attributed to the H-bondings induced both intramolecularly or/and intermolecularly between amide (-NH) and phenolic (-OH) groups. The crystal and molecular structures of mesogenic 2-(5-(2-(hexyloxy)naphthalene-6-yl)-1,3,4-oxadiazole-2-yl)phenol (2; n=6, m=6) were determined by means of X-ray structural analysis. It crystallizes in the monoclinic space group P-1, with a=7.4255(18) Å, b=8.209(2) Å, c=17.315(5) Å, and Z=2. An intermolecular H-bond (d=1.89 Å) between N2 and H1A atoms with an angle of 161.5° was observed. All molecules were packed as tilted layer arrangement and a π-π interaction (ca. 3.56 Å) was observed. Variable temperature FTIR and ¹H NMR spectroscopies were also used to probe the possible H-bondings formed in compound 2 (m=0, n=6). The fluorescent properties of these compounds 2 were examined. All λ_max peaks of the absorption and photoluminescence spectra occurred at ca. 359-363 nm and 519-537 nm, respectively. Excited state intramolecular proton transfer (ESIPT) reaction in this type of ortho-hydroxy-1,3,4-thiadiazole was also observed.     

Optimized POCl3-assisted synthesis of 2-amino-1,3,4-thiadiazole/1,3,4-oxadiazole derivatives as anti-influenza agents

Although recent decades have witnessed the synthesis of 1,3,4-thiadiazoles via phosphorus POCl₃-promoted cyclization reaction, simultaneous access to 2-amino-1,3,4-thiadiazole and 2-amino-1,3,4-oxadiazole analogs remains unexpected and elusive. Herein, a detailed regiocontrolled synthesis of 2-amino-1,3,4-thiadiazoles in good to high yields with good regioselectivities from readily available thiosemicarbazides using POCl₃ was disclosed. Meantime, to establish a comprehensive structure–activity relationship, 2-amino-1,3,4-oxadiazole derivatives as single regioisomers were prepared via EDCI·HCl-triggered cyclization of the thiosemicarbazide intermediates. The in vitro anti-influenza assays proved that the selected compounds with the pyrazine/pyridine ring exhibited certain inhibitory activities against influenza A virus strains A/HK/68 (H3N2) and A/PR/8/34 (H1N1) in MDCK cells. Among them, N-(adamantan-1-yl)-5-(5-(azepan-1-yl)pyrazin-2-yl)-1,3,4-thiadiazol-2-amine (4j) was the most active compound, and exhibited favorable activity with EC₅₀ values of 3.5 μM and 7.5 μM, respectively. In addition, the molecular docking results explained the reason why compound 4j had dual inhibitory activity and revealed the reasonable binding mode of this compound with the M2-S31N and M2-WT ion channels. This compound had the potential to be further developed as an anti-influenza drug.     

Room-temperature fluorescent liquid crystalline dimers based on discotic 1,3,4-oxadizole

A series of liquid crystalline dimers DOXD-n (n = 6–10) based on discotic 1,3,4-oxadiazole have been synthesised and its thermal properties have been investigated by means of polarised optical microscopy, differential scanning calorimetry, variable-temperature X-ray diffraction and thermogravimetric analyses. Most of the dimers display a discotic nematic phase or a hexagonal columnar phase at room temperature and exhibit photoluminscence in solution, in solid state and in liquid crystalline phase. The relationship between the properties and states of the matter is discussed briefly. Notably, the fluorescent intensity in liquid crystalline state decreased apparently compared to that in solid state due to the self-quenching aggregates.     

The synthesis and mesomorphic behaviour of tetracatenar di-hydrazine derivatives

Symmetrical four-chained (tetracatenar) di-hydrazine derivatives, namely oxalyl N',N'-bis(3,4-dialkoxybenzoyl)-hydrazide (BFH-n, n?=?4, 6, 8, 10), were synthesised. Investigations on the liquid crystalline properties by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarising optical microscopy (POM) showed that the di-hydrazine derivatives exhibited columnar mesophases and the symmetry of the mesophase changes from rectangular to hexagonal on increasing the temperature. The rectangular columnar mesophases of BFH-n (n?=?6, 8, 10) remained stable down to 10°C during cooling and the subsequent recrystallisation from the Col_r phase of BFH-n (n?=?6, 8, 10) was observed on the second heating runs. Furthermore, the average number of molecules packing in a column slice was estimated to be three, based on their X-ray diffraction results. Intermolecular hydrogen bonding between –C=O and ?N?H groups in crystalline and liquid crystalline phases was confirmed.     

Synthesis and characterisation of asymmetrical mesogenic materials based on 2,5-disubstituted-1,3,4-oxadiazole

New mesogenic homologous series bearing 1,3,4-oxadiazole ring with a nitro terminal group, 4-(5-(4-nitrophenyl)-1,3,4-oxadiazol-2-yl)phenyl 4-((4-methoxybenzylidene)amino)benzoate (G₁–G₁₁), were synthesised. Their chemical structures are identified by fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (¹H-NMR) and elemental analysis. The liquid crystalline properties of the series G_n and their precursory F_n were screened by differential scanning calorimetry and optical polarising microscopy (OPM). The compounds of the series G_n were screened by thermogravimetric analysis to observe their thermal stability. The target compounds (G_n) in this study, were displayed different liquid crystalline mesophase, the first two homologous (G₁ and G₂) did not show any liquid crystalline behaviour, the homologous (G₃–G₁₀) which have an alkoxy terminal group (n = 3–10) exhibited nematic phase, whilst the last derivative of the series (G₁₁), n = 12, displayed SmA phase. The mesomorphic properties of these derivatives were affected by the presence of the nitro group at the end of the molecules which was classified as a strong polar group. Also, the role of alkoxy terminal chain and the bent heterocyclic ring (1,3,4-oxadiazole) in the liquid crystalline properties of these molecules were debated.     

Poly(1,3,4-oxadiazole-ether-imide)s and their polydimethylsiloxane-containing copolymers

Poly(1,3,4-oxadiazole-ether-imide)s were prepared by thermal imidization of poly(amic-acid) intermediates resulting from the solution polycondensation reaction of a bis(ether-anhydride), namely 2,2′-bis-[(3,4-dicarboxyphenoxy)phenyl]-1,4-phenylenediisopropylidene dianhydride, with different aromatic diamines containing 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. Poly(1,3,4-oxadiazole-ether-imide)-polydimethylsiloxane copolymers were prepared by polycondensation reaction of the same bis(ether-anhydride) with equimolar quantities of an aromatic diamine having 1,3,4-oxadiazole ring and a bis(aminopropyl)polydimethylsiloxane oligomer of controlled molecular weight. A solution imidization procedure was used to convert quantitatively the poly(amic-acid) intermediates to the corresponding polyimides. All the polymers were easily soluble in polar organic solvents such as N-methylpyrrolidone and N,N-dimethylacetamide. The polymers showed good thermal stability with decomposition temperature being above 400 °C. Solutions of some polymers in N-methylpyrrolidone exhibited blue fluorescence, having maximum emission wavelength in the range of 370-412 nm.     

Synthesis and characterization of some nitrogen heterocycles from d-galactose derivatives

The tetrazoles 5-(6′-acetamido-6′-deoxy-1′,2′:3′,4′-di-O-isopropylidene-D-glycero-α-D-galactohexopyranos-6′-yl)tetrazole ( 1 ) and 5-(6′-acetamido-6′-deoxy-1′,2′:3′,4′–di-O-isopropylidene-L-glycero-α-D-galacto-hexopyranos-6′-yl)-tetrazole ( 2 ) were synthesized by the 1,3-dipolar cycloaddition reaction of the epimeric α-acetamidonitriles 5 and 6 , respectively, with sodium azide. Reaction of tetrazole 1 with acetic anhydride in the presence of pyridine afforded the N-acetyl-1,3,4-oxadiazole derivative 3 and the N-acetylacetamido-1,3,4-oxadiazole derivative 7 . The N-acetylacetamido-1,3,4-oxadiazole derivative ( 8 ) was isolated when the tetrazole 2 was allowed to react under the same conditions. The physical and spectroscopic data of the five new compounds 1, 2, 3, 7 and 8 are presented.     

H-Bonded metallomesogens: preparation, characterization, and mesomorphic studies of (3-hydroxypropylimino)propan-1,2-diols

Two series of new Schiff bases 2 (n=8, 12, 16) derived from (3-hydroxypropyl imino)propan-1, 2-diol with a hydroxyl group at C₁₉/C₂₀-position and their palladium complexes 1 were prepared and their mesomorphic properties investigated by DSC, POM, and XRD. The presence of both hydroxyl groups was found to be crucial in forming the liquid crystalline behavior. All compounds 2a exhibited smectic A or and C phases, in contrast, all compounds 2b formed hexagonal columnar phases. The formation of mesophases in both compounds 1-2 was probably induced by inter-molecular H-bonds. Single crystallographic data in mesogenic compound 2a (n=8) indicated that a dimeric structure with a better linear or rod-like molecular shape was formed by an inter-molecular H-bond (O4-O1′, ∼1.854 Å). Another inter-molecular H-bond (∼1.903 Å) between two dimeric structures was also observed. It crystallizes in a monoclinic space group P2(1)/c. On the other hand, all palladium complexes 1 formed enantiotropic smectic A phases. Single crystallographic data in mesogenic compound 1a (n=8) indicated that the geometry at Pd²⁺ center was coordinated as slightly twisted square planar. It crystallizes in a monoclinic space group P2(1)/n. An inter-molecular H-bond (∼1.799 Å) between neighboring molecules were observed, which might have facilitated the formation of mesophases. Variable-temperature powder XRD experiments confirmed their mesophase structures.     

Reactions of α-mercaptocarboxylic acid hydrazides with triethyl orthoesters: synthesis of 1,3,4-thiadiazin-5(6H)-ones and 1,3,4-oxadiazoles

Reactions of α-mercapto-β-phenylpropionic and α-mercaptophenylacetic acid hydrazides with triethyl orthoesters were conducted under N₂ in glacial acetic acid and resulted in the formation of two groups of products, derivatives of 1,3,4-thiadiazin-5(6H)-ones and 2-(1-mercaptomethyl)-1,3,4-oxadiazoles. When conducting the same transformations on α-mercaptophenylacetic acid hydrazide in the presence of air, two different products from the 1,3,4-oxadiazole family, the appropriate bis(1,3,4-oxadiazol-2-yl-phenylmethyl) disulfides and 2-benzyl-1,3,4-oxadiazoles, were formed with the liberation of free sulfur. The oxygenated bis(1,3,4-oxadiazol-2-yl-phenylmethyl) disulfides were reduced to the corresponding 2-(1-mercaptomethyl)-1,3,4-oxadiazoles with the use of zinc powder under mild conditions.     

Poly(1,3,4-oxadiazole-imide)s containing dimethylsilane groups

New poly(1,3,4-oxadiazole-imide)s containing dimethylsilane units have been prepared by solution polycondensation reaction of an aromatic dianhydride incorporating dimethylsilane group, namely bis(3,4-dicarboxyphenyl)dimethylsilane dianhydride, with different aromatic diamines having preformed 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2,5-bis[p-(3-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-fluorophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole, and 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. The polymers were easily soluble in polar organic solvents, such as N-methylpyrrolidinone, N,N-dimethylformamide, and pyridine, as well as in less polar organic solvents, such as tetrahydrofuran and chloroform. Very thin coatings deposited on silicon wafers exhibited smooth, pinhole-free surface in atomic force microscopy investigations. The polymers showed high thermal stability with decomposition temperature being above 415 °C.They exhibited a glass transition in the temperature range of 202-282 °C, with reasonable interval between glass transition and decomposition temperature. Solutions of the polymers in N,N-dimethylformamide exhibited fluorescence, having maximum emission wavelength in the range of 353-428 nm.     

The route to MBxNyCz molecular wheels: II. Results using accurate functionals and basis sets

Applying ab initio quantum chemical methods, molecular wheels composed of metal and light atoms were investigated. High quality basis sets 6-31G*, TZPV, and cc-pVTZ as well as exchange and non-local correlation functionals B3LYP, BP86 and B3P86 were used. The ground-state energy and structures of cyclic planar and pyramidal clusters TiB_n (for n = 3–10) were computed. In addition, the relative stability and electronic structures of molecular wheels TiB_xN_yC_z (for x, y, z = 0–10) and MB_nC_10−n (for n = 2 to 5 and M = Sc to Zn) were determined. This paper sustains a follow-up study to the previous one of Boustani and Pandey [Solid State Sci. 14 (2012) 1591], in which the calculations were carried out at the HF-SCF/STO3G/6-31G level of theory to determine the initial stability and properties. The results show that there is a competition between the 2D planar and the 3D pyramidal TiB_n clusters (for n = 3–8). Different isomers of TiB₁₀ clusters were also studied and a structural transition of 3D-isomer into 2D-wheel is presented. Substitution boron in TiB₁₀ by carbon or/and nitrogen atoms enhances the stability and leads toward the most stable wheel TiB₃C₇. Furthermore, the computations show that Sc, Ti and V at the center of the molecular wheels are energetically favored over other transition metal atoms of the first row.     

Synthesis and in vitro antibacterial activity of new oxoethylthio-1,3,4-oxadiazole derivatives

In the present investigation, a series of 2(4-pyridyl)-5[(aryl/heteroarylamino)-1-oxoethyl]thio-1,3,4-oxadiazole were synthesized using isonicotinohydrazide and substituted aryl/heteroaryl amines using pyridine as solvent. Newly synthesized compounds were tested for their in vitro anti-tubercular activity against Mycobacterium tuberculosis H37Rv using the BACTEC 460 radiometric system. Among the synthesized compounds, compounds 2(4-pyridyl)-5((2-nitrophenylamino)-1-oxoethyl)thio-1,3,4-oxadiazole (5e), 2(4-pyridyl)-5((4-nitrophenylamino)-1-oxoethyl)thio-1,3,4-oxadiazole (5g) and 2(4-pyridyl)-5((2-pyrrolylamino)-1-oxoethyl)thio-1,3,4-oxadiazole (5k) produced highest efficacy and exhibited >90% inhibition at a concentration of 0.0077, 0.0052 and 0.0089 μM, respectively. All the new compounds were pharmacologically evaluated for their in vitro Antimicrobial activity.     

Asymmetric oxadiazole mesogens as candidates for low-temperature biaxial nematics

We report the synthesis and properties of a homologous series of asymmetric, mesogenic derivatives of 2,5-bis-(p-hydroxyphenyl)-1,3,4-oxadiazole (ODBP). Benzyloxy (BnO-), alkoxy benzoate ester derivatives BnO-ODBP-Ph-O-C _n , where n?=?4, 5, 6, 7, 8, 9, 12, were studied by ²H-NMR, X-ray diffraction and polarising microscopy in order to ascertain if the lower temperature nematic phases exhibited biaxiality. Deuterium nuclear magnetic resonance (NMR) of labelled probes in these asymmetric mesogens does not show evidence of biaxiality. The absence of biaxiality is discussed in terms of the statistical non-linearity of these asymmetric ODBP mesogens.     

Symmetrical mesogenic 2,5-bis(6-naphthalen-2-yl)-1,3,4-thiadiazoles

Two series of new symmetrical 1,3,4-oxadiazoles 1a-n and 1,3,4-thiadiazoles 1b-n were prepared and their mesomorphic properties investigated by optical microscopy, differential scanning calorimetry, and powder X-ray diffractometry. Compounds 1b-n are kinetically more stable than compounds 1a-n. Compounds 1a-n exhibited monotropic nematic or smectic C phases, whereas, compounds 1b-n exhibited enantiotropic nematic or smectic A/smectic C phases. Compounds 1b-n have higher clearing temperatures and the larger temperature ranges of mesophases, which might be attributed to the better linearity and/or larger dipole, resulted from a more polarized sulfur atom than oxygen atom incorporated. The fluorescent properties of these two series of 1,3,4-thiadiazole/oxadiazole-based derivatives were also examined. The λ_max peaks of the photoluminescence spectra for compounds 1a-6 and 1b-6 measured in THF occurred at ca. 385 nm and 423 nm, respectively. Both series were blue emitters.     

Preparation and Crystal Structures of 4-(4′-Pyridylthio)-1-methylpyridinium Salts: Assembly of a Donor-Acceptor-Type Molecule Containing a Sulfide Bridge

A series of ionic 4-(4′-pyridylthio)-1-methylpyridinium salts with different counteranions (1, I⁻; 2, BF⁻₄; 3, PF⁻₆; and 4, OTf⁻, where OTf=trifluoromethanesulfonate) have been prepared. Structural analysis reveals that the cation exhibits a variety of stacking structures dependent on the anion. Compound 1 crystallizes in space group P2_1/n (#14), with a=10.764(3) Å, b=9.601(5) Å, c=13.105(3) Å, β=108.35(2), V=1285.4(8) ų, and Z=4. In this compound, each cation moiety is stacked in a helical arrangement along the c-axis. Compound 2, which is isomorphous to 1, has space group P2_1/n (#14), with a=11.647(2) Å, b=9.203(3) Å, c=13.232(2) Å, β=108.42(2), V=1345.6(5) ų, and Z=4. Compound 3 crystallizes in space group P2_1/n (#14), with a=8.06(1) Å, b=17.43(1) Å, c=10.30(1) Å, β=103.0(1), V=1410(3) ų, and Z=4. In this salt, the cation molecules assume a head-to-tail stacking arrangement, forming a polar pseudo 1-D chain. Compound 4 crystallizes in space group Pb? (#2), with a=7.585(4) Å, b=15.443(7) Å, c=6.775(4) Å, α=99.33(4), β=108.35(2)^o, γ=98.37(4), V=756.6(7) ų, and Z=2. The structure of 4 consists of a columnar stacking of pyridine moieties, with the cation moieties surrounded by the counteranions. Calculations show that the 4-(4′-pyridylthio)-1-methylpyridinium cation may be a good building block for second harmonic generation (SHG) materials, even though salts 1-4 crystallized in centrosymmetric structures and were SHG inactive.     

Heterocyclic 1,3,4-oxadiazole as columnar core

The synthesis, characterization and mesomorphic properties of a new type of liquid crystalline compound, the 2,5-bis(3,4,5-trialkoxyphenyl)-1,3,4-oxadiazoles, 3a-3h, are reported. These heterocyclic compounds are derived from unsaturated 1,3,4-oxadiazole as the core group, and obtained by the condensation reaction of 3,4,5-trialkoxybenzoic acid N-(3,4,5-trialkoxybenzoyl)-hydrazides and phosphorus oxychloride in toluene under reflux. All compounds were characterized by ¹H and ¹³C NMR spectroscopy, and elemental analysis. The mesomorphic properties of these and the related compounds 1, 2 were characterized and studied by differential scanning calorimetry and polarizing optical microscopy. The formation of columnar mesophases was found to be dependent on the numbers of alkoxy sidechains. The compounds 3 exhibited hexagonal columnar (Col_h) phases, however compounds 1, 2 formed crystalline phases. Compounds 3b-3e with shorter carbon chains were room temperature liquid crystals. Polar induction by nitrogen and/or oxygen atoms on the heterocyclic core ring might be responsible for the formation and better observed mesomorphic properties in this type of compound.