Catalytic adsorptive stripping voltammetry versus electrothermal atomic absorption spectrometry in the determination of trace cobalt and chromium in human urine

Two methods of the determination of cobalt and chromium in human urine of non-occupationally exposed populations—highly sensitive catalytic adsorptive stripping voltammetry (CAdSV) and electrothermal atomic absorption spectrometry (ET-AAS)—are evaluated and compared. The CAdSV methods are based on adsorptive accumulation of a cobalt-nioxime (1,2-cyclohexanedione dioxime) or a chromium-DTPA (diethylenetriammine-N,N,N′,N″,N″-pentaacetic acid) complexes on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the adsorbed complex in the presence of sodium nitrite in case of cobalt or in the presence of sodium nitrate in case of chromium determination. In the CAdSV procedure UV-photolysis was used for the sample pre-treatment; the ET-AAS determination did not require any separate preliminary decomposition of the analyte urine samples. The accuracy of the procedures was checked by the analysis of commercially available quality control urine samples. The detection limits (3σ) were 0.13 μg l⁻¹ for Co and 0.18 μg l⁻¹ for Cr in ET-AAS determination and 0.007 μg l⁻¹ for Co and 0.002 μg l⁻¹ for Cr in CAdSV measurements. Precision (R.S.D.) was less than 5% for both methods. The study has shown that the CAdSV is a more reliable and sensitive technique for the determination of very low cobalt and chromium contents in urine, the detection of which is not possible when using the AAS technique.     

A solid-phase extraction and size-exclusion liquid chromatographic method for polyethylene glycol 25 p-aminobenzoic acid determination in urine: validation for urinary excretion studies of users of sunscreens

No previous publications about percutaneous absorption of polyethylene glycol 25 p-aminobenzoic acid (PEG-25 PABA) have been found in the literature and the expected levels to be found in human urine after sunscreens use are unknown. The method proposed here is suitable to determine PEG-25 PABA in the urine of sunscreens users in order to carry out studies on body accumulation/excretion. It is based on solid-phase extraction (SPE) with size-exclusion liquid chromatography determination. Solid-phase extraction allows the analyte to be retained and subsequently eluted for a clean-up, using a silica-based cartridge. The size-exclusion liquid chromatography of the eluted allows the rest of matrix interferences to be avoided. Fluorescence intensity was measured at λ_em = 350 nm (λ_exc = 300 nm). The sensitivity of the proposed method is in the order of 450 ± 5 mL ng⁻¹ and the detection limit (3 S_y/x/b) in the measured solutions is in the order of 13 ng mL⁻¹, that is 2.6 ng mL⁻¹ in urine samples. The method enables PEG-25 PABA to be determined in both, spiked and unspiked human urine samples. Results obtained for spiked human urine samples (11-100 ng mL⁻¹) demonstrated the accuracy of the method. The mean relative standard deviation of the results was in the order of 3-10%. Three volunteers applied a sunscreen lotion containing a 8% PEG-25 PABA sunscreen cream and their urinary excretion was controlled from the moment of application until the excreted amounts were no longer detectable.     

Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.     

Non-chromatographic screening method for the determination of mercury species. Application to the monitoring of mercury levels in Antarctic samples

A simple non-chromatographic method for the determination of mercury (Hg²⁺), methylmercury (MeHg⁺), dimethylmercury (Me₂Hg), and phenylmercury (PhHg⁺) employing atomic fluorescence spectrometry (AFS) as detection technique was developed. Mercury species showed a particular behavior in the presence of several reagents. In a first stage SnCl₂ was employed for Hg²⁺ determination; in a second step, [Hg²⁺ + PhHg⁺] concentration was determined using SnCl₂ and UV radiation. MeHg⁺ decomposition was prevented adding 2-mercaptoethanol. In a third stage, [Hg²⁺ + PhHg⁺ + MeHg⁺] concentration was determined using K₂S₂O₈. Finally, the four species were determined employing NaBH₄. Reagents concentration and flow rates were optimized. The extraction technique of mercury species involved the use of 2-mercaptoethanol as ion-pair reagent. The limits of detection for Hg²⁺, PhHg⁺, MeHg⁺, and Me₂Hg were 1, 40, 68, and 99 ng L⁻¹ with a relative standard deviation of 1.5, 3.1, 4.7 and 5.8%, respectively. Calibration curve was linear with a correlation factor equal to 0.9995. The method was successfully applied to the determination of the mercury species in two Antarctic materials: IRMM 813 (Adamussium colbecki) and MURST-ISS-A2 (Antarctic Krill).     

Theoretical investigation of the bonding properties of N-heterocyclic carbenes coordinated to electron-rich d metal centers

Density functional theory (DFT) at the generalized gradient approximation (GGA) level has been applied for the analysis of the bond between group 10 metals and N-heterocyclic carbene (NHC) in complexes [MX₃(NHC)]⁻ (M = Ni, Pd, Pt, X = H, Cl, I). For comparative purposes, similar calculations have been performed for analogous pyridine complexes [MX₃(py)]⁻ (py = pyridine). Full geometry optimizations have been performed for all complexes. The role of the M-L π interaction was investigated by the aid of respectively, energy decomposition analysis, Hirshfeld atomic charge variation, molecular orbital considerations and bond order decomposition analysis. The π-bonding contribution increases in the order I < Cl < H, and Pt < Pd < Ni. Most significantly, the absolute π-acceptor ability of the NHC in these complexes is larger than that of pyridine. However, due to the dominant σ donor interactions, the relative contribution, that is the π/σ ratio, is predicted to be smaller.     

Microcalorimetry as a possible tool for phenanthrene toxicity evaluation to eukaryotic cells

Microcalorimetry and measurement of culture turbidity using a Bioscreen C Analyzer System were applied to study the toxic effect of phenanthrene on Cunninghamella elegans IM 1785/21Gp spore germination. The results of C. elegans spore incubation in Bioscreen C microbiology reader showed the inhibition of spore germination by 70% (with 25 mg l⁻¹ of phenanthrene) and total inhibition of the fungus growth with a higher content of the xenobiotic (50-100 mg l⁻¹). The microcalorimetric technique showed to be useful for the estimation of metabolic activity of C. elegans spores in growth medium up to xenobiotic concentrations of 90 mg l⁻¹. These data corresponded with the microscopic observations. The obtained results showed that the microcalorimetry method could be a valuable supplement in the study on the mechanism of PAHs detoxification by fungi.     

A reusable capacitive immunosensor for detection of Salmonella spp. based on grafted ethylene diamine and self-assembled gold nanoparticle monolayers

Fabrication of a novel capacitive immunosensor based on grafted ethylene diamine and self-assembled gold nanoparticle monolayer on glassy carbon electrode for the detection of Salmonella spp. is described for the first time. In the present study, the Salmonella spp. monoclonal antibodies (denoted as McAbs) was immobilized on gold nanoparticles. Interaction of McAbs and Salmonella spp. was detected directly using the electrochemical impedance spectroscopy (EIS) technique. The experimental results showed that the concentration of antigen was measured through the relative change in capacitance in the corresponding specific binding of Salmonella spp. and McAbs. Under the optimized conditions, the relative changes in capacitance were proportional to the logarithmic values of Salmonella spp. concentrations in the range of 1.0 × 10² to 1.0 × 10⁵ CFU mL⁻¹ (r = 0.991) with the detection limit of 1.0 × 10² CFU mL⁻¹. The stability of proposed immunosensor could be estimated by determining the relative change in capacitance, which remained almost the same in two months and decreased gradually to 85.3% of initial value after four months’ storage. The used immunosensor could be regenerated repeatedly by immersing in glycine-HCl buffer solution (pH 2.8). Finally, the proposed immunosensor was successfully used for the detection of Salmonella spp. in lab-processed commercial pork samples.     

Mg-doping experiment and electrical transport measurement of boron nanobelts

We measured electrical conductance of single crystalline boron nanobelts having α-tetragonal crystalline structure. The doping experiment of Mg was carried out by vapor diffusion method. The pure boron nanobelt is a p-type semiconductor and its electrical conductivity was estimated to be on the order of 10^-3 (Ω cm)⁻¹ at room temperature. The carrier mobility of pure boron nanobelt was measured to be on the order of 10⁻³ (cm² Vs⁻¹) at room temperature and has an activation energy of ∼0.19 eV. The Mg-doped boron nanobelts have the same α-tetragonal crystalline structure as the pristine nanobelts. After Mg vapor diffusion, the nanobelts were still semiconductor, while the electrical conductance increased by a factor of 100-500. Transition to metal or superconductor by doping was not observed.     

Synthesis and structures of thieno[2,3-b]thiophene incorporated [3.3]dithiacyclophanes. Enhanced first hyperpolarizability in an unsymmetrically polarized cyclophane

Dithiacyclophanes incorporating thieno[2,3-b]thiophene have been synthesized, in order to investigate the nonlinear optical properties of donor-acceptor cyclophane 7. Cyclophane 7 displayed significantly higher first hyperpolarizability β (21.6 × 10⁻³⁰ esu) compared to model 10 (9.58 × 10⁻³⁰esu). Relatively higher β in 7 presumably arises from an extra electron redistribution arising from through-space charge transfer, a feature lacking in 10. Moreover, the thermal decomposition temperature of 7 (300 °C) is higher than that reported for the NLO prototype DANS (295 °C).     

Synthesis and nonlinear optical properties of new symmetrically substituted stilbenes

Three new chromophores and trans-4-(N-(ethyl 4″-nitrobenzoate)-N-ethyl amino)-4′-(dimethyl amino) stilbene (DMANHAS) have been synthesized and whose chemical structures have been characterized by ¹H NMR, IR, and elemental analyses. Linear absorption, single-photon-induced fluorescence and two-photon-induced fluorescence are experimentally studied. Trans-4-(N-2-hydroxyethyl-N-ethyl amino)-4′-(dimethyl amino)stilbene (DMAHAS) and trans-4-(N-2-hydroxyethyl-N-ethyl amino)-4′-(diethyl amino)stilbene (DEAHAS) have effective two-photon absorption cross-sections of σ₂=0.91×10⁻⁴⁶ cm⁴ s/photon and σ₂=1.19×10⁻⁴⁶ cm⁴ s/photon at 532 nm by using an open aperture Z-scan technique, respectively. When pumped with 800 nm laser irradiation, DMAHAS and DEAHAS indicate strong two-photon-induced blue fluorescence of 436 and 440 nm, respectively, while trans-4-(N-(ethyl 4″-nitrobenzoate)-N-ethyl amino)-4′-(diethyl amino) stilbene (DEANHAS) and DMANHAS exhibit no fluorescence.     

On-chip integrated hydrolysis, fluorescent labeling, and electrophoretic separation utilized for acetylcholinesterase assay

A sensitive on-chip acetylcholinesterase (AChE) assay that serves as a basis for the development of a fully integrated on-chip AChE-inhibitor detection assay is presented. The sequential steps required for the on-chip analysis process were integrated into a microchip. Transport and mixing of the reagents occurred by a combination of electroosmosis and electrophoresis using computer-controlled electrokinetic transport. AChE-catalyzed hydrolysis of acetylthiocholine to thiocholine was determined by on-chip reaction of thiocholine with eosinmaleimide, and the resulting thioether was electrophoretically separated and detected by laser-induced fluorescence (LIF). Enzyme-substrate mixing and reaction by confluent flow of reagents was compared with electrophoretically mediated microanalysis (EMMA), based on injection of an enzyme plug, and the utilization of differences in electrophoretic mobility as a driving force for efficient mixing and reaction. Both methods yielded similar results, however the EMMA-plug technique is preferable. The EMMA-plug technique was optimized for length and pushing time of enzyme plug, length of dyes mixture plug, acetylthiocholine concentration, and detector location. Detection of O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothiolate (VX) and paraoxon, two AChE inhibitors, was demonstrated by off-chip mixing of the inhibitor and AChE, followed by the on-chip AChE assay. Limit of detection of VX for 5.5 min incubation and of paraoxon for 8 min incubation was 4 × 10⁻¹⁰ and 4 × 10⁻⁷ M, respectively. Utilization of the AChE microchip assay for inhibition kinetics was demonstrated also by evaluation of the inhibitor-enzyme bimolecular reaction constant (k_i). The evaluated k_i values for VX and paraoxon for AChE from the electric eel were 3.5 × 10⁷ and 1.7 × 10⁵ M⁻¹ min⁻¹, respectively, conforming well to reported values obtained by bulk methods.     

Determination of quinolizidine alkaloids in Sophora medicinal plants by capillary electrophoresis

A new capillary electrophoresis (CE) method for the determination of quinolizidine alkaloids in Sophora medicinal plants was developed. A total of seven alkaloid components (cytisine, sophocarpine, matrine, lehmannine, sophoranol, oxymatrine and oxysophocarpine) were separated within 15 min. The running buffer was a 50 mM phosphate buffer containing 1%HP-β-CD and 3.3% isopropanol. The linear calibration ranges were 5.50-88.0 μg ml⁻¹ for cytisine and lehmannine, 5.00-88.0 μg ml⁻¹ for sophocarpine and sophoranol, 5.60-89.6 μg ml⁻¹ for matrine and oxysophocarpine, and 24.0-384 μg ml⁻¹ for oxymatrine. The recoveries of the seven alkaloids were 96.0-102.9% with relative standard deviations from 1.50 to 3.00% (n = 5). The method was successfully applied to different Sophora medicinal plants including Sophora flavescens, Sophora tonkinensis and Sophora alopecuroides.     

Highly sensitive and selective fluorescence optosensor to detect and quantify benzo[a]pyrene in water samples

We describe here a method for detecting and quantifying the highly carcinogenic polycyclic aromatic hydrocarbon (PAH) benzo[a]pyrene (BaP) in water, based on a flow-trough optical sensor. The technique is fast (response time of 40 s) and simple and at the same time meets the standards of sensitivity and selectivity required by the European Guidelines on Water for Human Consumption. The optosensor is based on the on-line immobilization of BaP on a non-ionic resin (Amberlite XAD-4) solid support in a continuous-flow system. BaP was analyzed in a 15 mM H₂PO₄⁻/HPO₄²⁻ buffer solution with 25% (v/v) 1,4-dioxane at pH 7. Fluorescence intensity was measured at λ_ex/em=392/406 nm. The experimental conditions (reagent phase, pH, type and concentration of buffer solution and organic solvent) and flow-injection values (flow rate and injection volume) were carefully controlled. Under these conditions the optosensor was sensitive to a linear concentration range of between 3.0 and 250.0 ng l⁻¹ with a detection limit of 3.0 ng l⁻¹ and a standard deviation of 1.5% at 150 ng l⁻¹. The optosensor was applied to the quantification of BaP in drinking and waste water samples (95-105% recovery) in presence of the other 15 EPA PAHs at 1000 ng l⁻¹ concentration level. The influence of other fluorescent polycyclic aromatic hydrocarbons and potential interference from ions usually present in water was also evaluated.     

Solid-state cis-trans isomerization reaction of (η-MeC5H4)W(CO)2P(OPr)3I

cis-(η⁵-MeC₅H₄)W(CO)₂P(OⁱPr)₃I (1) was converted to the trans isomer 2 in the solid state (90-110 °C). The reaction was monitored by heating 1 in NMR tubes for periods of time (2-60 min), cooling the tubes to room temperature and determining the conversion by solution ³¹P and ¹H NMR spectroscopy. The data were consistent with a first-order reaction and yielded an activation energy of 59 ± 3 kJ mol⁻¹. Comparative kinetic data were obtained from an in situ analysis of a powder-XRD study of 1. The powder-XRD study was conducted at 80-100 °C (10-60 min), yielding an activation energy of 52 ± 2 kJ mol⁻¹ (first-order reaction). The reaction could not be monitored by single crystal X-ray diffraction as the crystal disintegrated over time on heating. This disintegration process was monitored by optical microscopy and revealed that while the bulk crystal morphology was retained the crystal surface roughened with time. The compounds 1 and 2 were also structurally characterised by X-ray crystallographic techniques.     

Oxidation of substituted pyridines by dimethyldioxirane: kinetics and solvent effects

The oxidation of a series of substituted pyridines by dimethyldioxirane (1) produced the expected N-oxides in quantitative yields. The second order rate constants (k₂) for the oxidation of a series of substituted pyridines (2a-g) by dimethyldioxirane were determined in dried acetone at 23 °C. An excellent correlation with Hammett sigma values was found (ρ = −2.91, r = 0.995). Kinetic studies for the oxidation of 4-trifluoromethylpyridine by 1 were carried out in the following dried solvent systems: acetone (k₂ = 0.017 M⁻¹ s⁻¹), carbon tetrachloride/acetone (7:3; k₂ = 0.014 M⁻¹ s⁻¹), acetonitrile/acetone (7:3; k₂ = 0.047 M⁻¹ s⁻¹), and methanol/acetone (7:3; k₂ = 0.68 M⁻¹ s⁻¹). Kinetic studies of the oxidation of pyridine by 1 versus mole fraction of water in acetone [k₂ = 0.78 M⁻¹ s⁻¹ (χ = 0) to k₂ = 11.1 M⁻¹ s⁻¹ (χ = 0.52)] were carried out. The results showed the reaction to be very sensitive to protic, polar solvents.     

Imaging of nutrient elements in the leaves of Elsholtzia splendens by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS)

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used for the quantitative imaging of nutrient elements (such as K, Mg, Mn, Cu, P, S and B) in the leaves of Elsholtzia splendens. The plant leaves were scanned directly with a focused Nd:YAG laser in the laser ablation chamber. The ablated material was transported with argon as carrier gas to a quadrupole-based ICP-MS (ICP-QMS), and the ion intensities of ³⁹K⁺, ²⁴Mg⁺, ⁵⁵Mn⁺, ⁶³Cu⁺, ³¹P⁺, ³⁴S⁺ and ¹¹B⁺ were measured by ICP-QMS to study the distribution of the elements of interest. The imaging technique using LA-ICP-MS on plant leaves does not require any sample preparation. Carbon (¹³C⁺) was used as an internal standard element to compensate for the difference in the amount of material ablated. Additional experiments were performed in order to study the influence of the water content of the analyzed leaves on the intensity signal of the analyte. For quantification purposes, standard reference material (NIST SRM 1515 Apple Leaves) was selected and doped with standard solutions of the analytes within the concentration range of 0.1-2000 mg L⁻¹. The synthetic laboratory standards together with the samples were measured by LA-ICP-MS. The shape and structure of the leaves was clearly given by LA-ICP-MS imaging of all the elements measured. The elemental distribution varied according to the element, but with a high content in the veins for all the elements investigated. Specifically, Cu was located uniformly in the mesophyll with a slightly higher concentration in the main vein. High ion intensity was measured for S with a high amount of this element in the veins similar to the images of the metals, whereas most of the B was detected at the tip of the leaf. With synthetic laboratory standard calibration, the concentrations of elements in the leaves measured by LA-ICP-MS were between 20 μg g⁻¹ for Cu and 14,000 μg g⁻¹ for K.     

Speciation of dissolved Fe(II) and Fe(III) in environmental water samples by micro-column packed with N-benzoyl-N-phenylhydroxylamine loaded on microcrystalline naphthalene and determination by electrothermal vaporization inductively coupled plasma-optical emission spectrometry

A novel solid phase extraction technique for the speciation of trace dissolved Fe(II) and Fe(III) in environmental water samples was developed by coupling micro-column packed with N-benzoyl-N-phenylhydroxylamine (BPHA) loaded on microcrystalline naphthalene to electrothermal vaporization inductively coupled plasma-optical emission spectrometry (ETV-ICP-OES). Various influencing factors on the separation and preconcentration of Fe(II) and Fe(III), such as the acidity of the aqueous solution, sample flow rate and volume, have been investigated systematically, and the optimized operation conditions were established. At pH 3.0 Fe(III) could be selectively retained by micro-column (20 mm × 1.4 mm, i.d.) packed with BPHA immobilized on microcrystalline naphthalene, and Fe(II) passed through the micro-column. Both Fe(II) and Fe(III) could be adsorbed by the micro-column at pH 6.5. Thus, the total Fe could be determined without the need for preoxidation of Fe(II) to Fe(III). The retained Fe(III) or the Fe(II) and Fe(III) was subsequently eluted by 0.1 ml of 1 mol l⁻¹ HCl. The adsorption capacity of the solid phase adsorption material was found to be 45.0 mg g⁻¹ for Fe(III) at pH 3.0 and 65.3 mg g⁻¹ for Fe(II) at pH 6.5, respectively. The detection limit (3σ) of 0.053 μg l⁻¹ was obtained with a practical enrichment factor of 156 at a sample volume of 17 ml. The relative standard deviations of 4.2% and 4.6% (C_Fe(III) = C_Fe(II) = 10 μg l⁻¹, n = 7) for Fe(III) and total iron were found, respectively. The method was successfully applied to the determination of trace Fe(II) and Fe(III) in environmental water samples (East Lake water, local tap water and mineral water). In order to validate the method, the developed method was applied to the determination of total iron in certified materials of NIES NO.10-b rice flour and GBW07605 tea leaves, and the results obtained were in good agreement with the certified values.     

Solid-phase spectrophotometric determination of nickel in water and vegetable samples at sub-mug l(-1) level with o-carboxylphenyldiazoaminoazobenzene loaded XAD-4

A highly sensitive and selective solid-phase spectrophotometric method for the determination of sub-μg l⁻¹ level nickel(II) is described. Nickel(II) was sorbed on a styrene-divinylbenzene-type resin Amberlite XAD-4 as a Ni(II)-o-carboxylphenyldiazoaminoazobenzene (o-CDAA) complex. At pH 9.0, resin phase absorbances at 588 and 800 nm were measured directly with an apparent molar absorptivity of 2.95×10⁷ g mol⁻¹ cm⁻¹. The linear range of the determination was 1.2-41 μg g⁻¹ resin. The detection limit and the quantification limit were found to be 0.24 and 0.76 μg g⁻¹ resin, respectively. The relative standard deviation of 10 replicate determinations of 1.0 μg nickel(II) in 100 ml sample was of 1.5%. The tolerance limit of coexistent ions was also investigated. Most of them are in tolerable amount. For practical analyses, 1 ml acetylacetone used can eliminate the interferences caused by Cu and Fe. The procedure was validated by analysis a certified water reference material (GBW 08618 Beijing, China) and a tomato leaf certified reference material (GBW 08402 Beijing, China) with the results in agreement with the certified values. The method was applied to the determination of nickel(II) in water and vegetable samples with satisfactory results.     

Fluorescence detection of total count of Escherichia coli and Staphylococcus aureus on water-soluble CdSe quantum dots coupled with bacteria

The aim of this paper was to demonstrate a fluorescence measurement method for rapid detection of two bacterial count by using water-soluble quantum dots (QDs) as a fluorescence marker, and spectrofluorometer acted as detection apparatus, while Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were as detection target bacteria. Highly luminescent water-soluble CdSe QDs were first prepared by using thioglycolic acid (TGA) as a ligand, and were then covalently coupled with target bacteria. The bacterial cell images were obtained using fluorescence microscopy. Our results showed that CdSe QDs prepared in water phase were highly luminescent, stable, and successfully conjugated with E. coli and S. aureus. The fluorescence method could detect 10²-10⁷ CFU/mL total count of E. coli and S. aureus in 1-2 h and the low detection limit is 10² CFU/mL. A linear relationship of the fluorescence peak intensity and log total count of E. coli and S. aureus have been established using the equation Y = 118.68X − 141.75 (r = 0.9907).     

Redox-active metal(II) complexes of sterically hindered phenolic ligands: Antibacterial activity and reduction of cytochrome c. Part II. Metal(II) complexes of o-diphenol derivatives of thioglycolic acid

The synthesis and physico-chemical characterization of Fe(II) and Mn(II) complexes of 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (HL^I) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfinyl]acetic acid (HL^II) were carried out. The investigation of the molecular and electronic structure of Cu(II), Ni(II), Zn(II), Fe(II) and Mn(II) complexes has been performed within the density functional theory (DFT) framework. The computed properties were compared to the experimental ones, and molecular structures of the compounds were proposed based on the array of spectral data and quantum chemical calculations. Antibacterial activity of the Fe(II) and Mn(II) complexes was evaluated in comparison with Cu(II), Co(II), Ni(II) and Zn(II) complexes and three standard antibiotics; it was found to follow the order: (1) Сu(L^I)₂ > Mn(L^I)₂ > HL^I > Ni(L^I)₂ > Zn(L^I)₂ > Fe(L^I)₂ > Co(H₂O)₂L^I; (2) Cu(L^II)₂ > Сo(L^II)₂ > Ni(L^II)₂ > Mn(H₂O)₂(L^II)₂ > Fe(L^II)₂ > HL^II > Zn(L^II)₂; their reducing ability (determined electrochemically) followed the same order. Spectrophotometric investigation was carried out in order to estimate the rate of the reduction of bovine heart сytochrome c with the ligands and their metal(II) complexes. The complexes Сu(L^I)₂, Mn(L^I)₂ and Co(L^II)₂ with the high reducing ability were found to be characterized by the highest rates of Cyt с reduction. NADPH:cytochrome P450-reductase had no substantial effect on the rate of сytochrome c reduction with HL^I and HL^II ligands.