Toward Electrochemically Controllable Tristable Three‐Station [2]Catenanes

Encouraged by the prospect of producing an electrochemical, color‐switchable red–green–blue (RGB) dye compound, we have designed, synthesized, and characterized two three‐station [2]catenanes. Both are composed of macrocyclic polyethers containing three π‐electron‐rich stations, which act as recognition sites for a π‐electron‐deficient tetracationic cyclophane. The molecular structures of the two three‐station [2]catenanes were characterized fully by mass spectrometry and ¹H NMR spectroscopy. To anticipate the relative occupancies of the three stations in each [2]catenane by the cyclophane, model compounds with the same constitutions in the vicinity of the stations were synthesized. The relative ground‐state populations of the three stations occupied in both [2]catenanes were estimated from the thermodynamic parameters for 1:1 complexes between all these model compounds and the cyclophane, obtained from isothermal titration calorimetry (ITC). The electrochemical and electromechanical properties of the three‐station [2]catenanes were analyzed by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and spectroelectrochemistry (SEC). The first three‐station [2]catenane was found to behave like a bistable system, whereas the second can be described as a quasi‐tristable system.     

Two classes of alongside charge-transfer interactions defined in one [2]catenane

A [2]catenane, which incorporates hydroquinone (HQ) and a sterically bulky tetrathiafulvalene (TTF) into a bismacrocycle, has been designed to probe the alongside charge-transfer (CT) interactions taking place between a TTF unit and one of the bipyridinium moieties in the tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT4+). A template-directed strategy employs the HQ unit as the primary template for formation of the tetracationic cyclophane CBPQT4+, affording the desired [2]catenane structure but as an uncharacteristic green solid. The X-ray crystal structure and detailed 13C NMR assignments have identified a stereoselective preference for catenation about the cis isomer. The 1H NMR spectroscopy, electrochemistry, and X-ray crystallography all confirm that the CBPQT4+ cyclophane encircles the HQ unit, thereby defining a structure which would normally determine a red color. The visible-NIR region of the absorption spectrum displays a band at approximately 740 nm that is unambiguously assigned to a TTF --> CBPQT4+ CT transition on the basis of resonance Raman spectroscopy using 785 nm excitation. The profile of the CT band changes depending on the ratio of the cis- to trans-TTF isomers in the [2]catenane for which the molar absorptivity of each isomer is estimated to be significantly different at epsilon max = 380 and 3690 M-1 cm-1, respectively. Molecular modeling studies confirmed that the observed difference in the absorption spectroscopic profile can be accounted for by both a better overlap of the HOMO(TTF) and LUMO+1(CBPQT4+) as well as a more stable face-to-face (pi...pi) conformation in the trans isomer compared to the edge-to-face cis isomer of the [2]catenane. The latter is arranged for pi-orbital overlap through the sulfur atoms of the TTF unit, thereby defining an [Spi...pi] interaction.     

Self－assembly of Novel Hetero[3]rotaxane, [2]Rotaxanes and [2]Catenane

One linear template 13 and one cyclophane template 15, both incorporating two electron rich 1,4‐dialkoxybenzene units and one diamide unit, have been synthesized. By utilizing donor‐acceptor interaction and/or intermolecular hydrogen bonding assembling principles, one novel hetero[3]rotazane 22·4Cl, possessing one neutral and one tetracationic ring components, has been synthesized from 13, through neutral [2]rotaxane 21 as intermediate. With 15 as template, tetracationic [2]catenane 23·4PF₆ was assembled by using donor‐acceptor interaction, but no neutral [2]rotaxane could be obtained under the typical conditions of hydrogen bonding assembling principle. The interlocked supramolecular compounds have been characterized and their spectral properties are investigated.     

An electrochemical color-switchable RGB dye: tristable [2]catenane

We propose a design for an electrochemically driven RGB dye based on a tristable [2]catenane, in which the color of the molecule can be switched between Red, Green, and Blue by merely changing voltage. Based on DFT calculations, we conclude that the tristable [2]catenane should consist of a CBPQT4+ ring interlocked with a polyether macrocyle containing DNP (red), TTF (green), and FBZD (blue) units as the tunable RGB color-generating donors. Thus, at controllable voltages 0, V1, and V2, the [2]catenane is expected to display green, blue, and red colors, respectively. The advent of these RGB tristable molecules may have potential applications in low cost paperlike electronic displays.     

Redox-controllable amphiphilic [2]rotaxanes

With the fabrication of molecular electronic devices (MEDs) and the construction of nanoelectromechanical systems (NEMSs) as incentives, two constitutionally isomeric, redox-controllable [2]rotaxanes have been synthesized and characterized in solution. Therein, they both behave as near-perfect molecular switches, that is, to all intents and purposes, these two rotaxanes can be switched precisely by applying appropriate redox stimuli between two distinct chemomechanical states. Their dumbbell-shaped components are composed of polyether chains interrupted along their lengths by i) two pi-electron rich recognition sites-a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) moiety-with ii) a rigid terphenylene spacer placed between the two recognition sites, and then terminated by iii) a hydrophobic tetraarylmethane stopper at one end and a hydrophilic dendritic stopper at the other end of the dumbbells, thus conferring amphiphilicity upon these molecules. A template-directed protocol produces a means to introduce the tetracationic cyclophane, cyclobis(paraquat-p-phenylene) (CBPQT(4+)), which contains two pi-electron accepting bipyridinium units, mechanically interlocked around the dumbbell-shaped components. Both the TTF unit and the DNP moiety are potential stations for CBPQT(4+), since they can establish charge-transfer and hydrogen bonding interactions with the bipyridinium units of the cyclophane, thereby introducing bistability into the [2]rotaxanes. In both constitutional isomers, (1)H NMR and absorption spectroscopies, together with electrochemical investigations, reveal that the CBPQT(4+) ring is predominantly located on the TTF unit, leading to the existence of a single translational isomer (co-conformation) in both cases. In addition, a model [2]rotaxane, incorporating hydrophobic tetraarylmethane stoppers at both ends of its dumbbell-shaped component, has also been synthesized as a point of reference. Molecular synthetic approaches were used to construct convergently the dumbbell-shaped compounds by assembling progressively smaller building blocks in the shape of the rigid spacer, the TTF unit and the DNP moiety, and the hydrophobic and hydrophilic stoppers. The two amphiphilic bistable [2]rotaxanes are constitutional isomers in the sense that, in one constitution, the TTF unit is adjacent to the hydrophobic stopper, whereas in the other, it is next to the hydrophilic stopper. All three bistable [2]rotaxanes have been isolated as green solids. Electrospray and fast atom bombardment mass spectra support the gross structural assignments given to all three of these mechanically interlocked compounds. Their photophysical and electrochemical properties have been investigated in acetonitrile. The results obtained from these investigations confirm that, in all three [2]rotaxanes, i) the CBPQT(4+) cyclophane encircles the TTF unit, ii) the CBPQT(4+) cyclophane shuttles between the TTF and DNP stations upon electrochemical or chemical oxidation/reduction of the TTF unit, and iii) folded conformations are present in which the CBPQT(4+) cyclophane, while encircling the TTF unit, interacts through its pi-accepting bipyridinium exteriors with other pi-donating components of the dumbbells, especially those located within the stoppers.     

A multistate switchable [3]rotacatenane

Rotacatenanes are exotic molecular compounds that can be visualized as a unique combination of a [2]catenane and a [2]rotaxane, thereby combining both the circumrotation of the ring component (rotary motion) and the shuttling of the dumbbell component (translational motion) in one structure. Herein, we describe a strategy for the synthesis of a new switchable [3]rotacatenane and the investigation of its switching properties, which rely on the formation of tetrathiafulvalene (TTF) radical π-dimer interactions-namely, the mixed-valence state (TTF(2) )(+.) and the radical-cation dimer state (TTF(+.) )(2) -under ambient conditions. A template-directed approach, based on donor-acceptor interactions, has been developed, resulting in an improved yield of the key precursor [2]catenane, prior to rotacatenation. The nature of the binding between the [2]catenane and selected π-electron-rich templates has been elucidated by using X-ray crystallography and UV/Vis spectroscopy as well as isothermal titration microcalorimetry. The multistate switching mechanism of the [3]rotacatenane has been demonstrated by cyclic voltammetry and EPR spectroscopy. Most notably, the radical-cation dimer state (TTF(+.) )(2) has been shown to enter into an equilibrium by forming the co-conformation in which the two 1,5-dioxynaphthalene (DNP) units co-occupy the cavity of tetracationic cyclophane, thus enforcing the separation of TTF radical-cation dimer (TTF(+.) )(2) . The population ratio of this equilibrium state was found to be 1:1. We believe that this research demonstrates the power of constructing complex molecular machines using template-directed protocols, enabling us to make the transition from simple molecular switches to their multistate variants for enhancing information storage in molecular electronic devices.     

Host-[2]rotaxanes as cellular transport agents

Host-[2]rotaxanes, containing a diarginine-derivatized dibenzo-24-crown-8 (DB24C8) ether as the ring and a cyclophane pocket or an aromatic cleft as one blocking group, are cell transport agents. These hosts strongly associate with a variety of amino acids, dipeptides, and fluorophores in water (1 mM phosphate buffer, pH 7.0), DMSO, and a 75/25 (v/v) buffer to DMSO solution. All peptidic guests in all solvent systems have association constants (K(A)'s) in the range of 1 x 10(4) to 5 x 10(4) M(-)(1), whereas the K(A) range for the fluorophores is 1 x 10(4) to 9 x 10(5) M(-)(1). Association constants for the cyclophane itself, cyclophane 3, are smaller. These values are in the 1 x 10(3) to 5 x 10(3) M(-)(1) range, which shows that the rotaxane architecture is advantageous for guest binding. Cyclophane-[2]rotaxane 1 efficiently transports fluorescein and a fluorescein-protein kinase C (PKC) inhibitor into eukaryotic COS-7 cells, including the nucleus. Interestingly, cleft-[2]rotaxane 2 does not transport fluorescein as efficiently, even though the results from the fluorescence assays show that both [2]rotaxanes bind fluorescein with the same ability.     

Bispyrrolotetrathiafulvalene-containing [2]catenanes

Two [2]catenanes incorporating bispyrrolotetrathiafulvalene (BPTTF) and weaker aryl donors, hydroquinone (HQ) and 1,5-dioxynaphthalene (DNP), respectively, have been prepared and characterized. These [2]catenanes show a predominant amount (>95:5) of the co-conformation in which either the HQ or the DNP unit is encircled by a tetracationic cyclophane, cyclobis(paraquat-p-phenylene) (CBPQT4+), contrary to what is observed in systems based on the parent tetrathiafulvalene (TTF). These new [2]catenanes act effectively as molecular switches which are always configured in the "on" state.     

Half-rotation in a [2]catenane via interconvertible Pd(II) coordination modes

Reaction of a [2]catenane with Pd(OAc)2 binds both macrocycles to the metal, locking them in position; treatment with PdCl2, however, results in coordination of only one ring, producing a half-turn in the relative orientation of the [2]catenane components in both solution and the solid state.     

Translational isomerism in a [3]catenane and a [3]rotaxane

[structure: see text] Post-assembly covalent modification using Wittig chemistry of [2]rotaxane ylides, wherein NH(2)(+) centers in the dumbbell-shaped components are recognized by dibenzo[24]crown-8 (DB24C8) rings, has afforded a [3]catenane and a [3]rotaxane with a precise and synthetically prescribed shortage of DB24C8 rings. The nondegenerate pairs of translational isomers present in both of these interlocked molecular compounds provide the fundamental platform on which to construct sensory devices and nanochemomechanical systems.     

Dynamic [2]catenanes based on a hydrogen bonding-mediated bis-zinc porphyrin foldamer tweezer: a case study

This paper describes the self-assembly of a new class of three-component dynamic [2]catenanes, which are driven or stabilized by intramolecular hydrogen bonding, coordination, and electrostatic interaction. One of the component molecules 2, consisting of an aromatic oligoamide spacer and two peripheral zinc porphyrin units, was designed to adopt a folded preorganized conformation, which is stabilized by consecutive intramolecular three-centered hydrogen bonds. Component molecule 3 is a linear secondary ammonium bearing two peripheral pyridine units, which was designed to form a 1:1 complex with 24-crown-8 (5). The 1H NMR and UV-vis experiments in CDCl3-CD3CN (4:1 v/v) revealed that, due to the preorganized U-shaped feature, 2 could efficiently bind 3 through the cooperative zinc-pyridine coordination to generate highly stable 1:1 complex 2.3. Adding 5 to the 1:1 solution of 2 and 3 led to the formation of dynamic three-component [2]catenane 2.3.5 as a result of the threading of 3 through 5. 1H NMR studies indicated that in the 1:1:1 solution (3 mM) [2]catenane 2.3.5 was generated in 55% yield at 25 degrees C. The yield was increased with the reduction of the temperature and [2]catenane could be produced quantitatively in a 1:1:2 solution ([2]=3 mM) at -13 degrees C. Replacing 3 with 1,2-bis(4,4'-bipyridinium)ethane (4) in the three-component solution could also give rise to similar dynamic [2]catenane 2.4.5 albeit in slightly lower yield.     

Construction of a hetero pseudo[2]rota[2]catenane

A novel ammonium template containing three ammonium sites was synthesized. Two ammoniums located on the linear component served as template for cucurbit[6]uril to form the CB-based pseudo[2]rotacane while another one located on the macrocyclic component played a role of template for clipping reaction. As a result of a ‘‘threading-followed-by-clipping' approach, a novel hetero pseudo[2]rota[2]catenane was successfully constructed.     

Cyclic [2]Catenane Dimers,Trimers, and Tetramers

Dimeric, trimeric, and tetrameric cyclic [2]catenanes have been prepared directly through one‐pot sodium‐ion‐templated dynamic imine formation from a diamine and a tetraaldehyde. NaBH₄ mediated reduction of the labile imino bonds of these cyclic [2]catenane oligomers, followed by methylation of the resulting secondary amino groups enabled the isolation and characterization of oligomeric cyclic [2]catenanes as stable, covalently linked compounds.     

Discovery of an all-donor aromatic [2]catenane

We report herein the first all-donor aromatic [2]catenane formed through dynamic combinatorial chemistry, using single component libraries. The building block is a benzo[1,2-b:4,5-b′]dithiophene derivative, a π-donor molecule, with cysteine appendages that allow for disulfide exchange. The hydrophobic effect plays an essential role in the formation of the all-donor [2]catenane. The design of the building block allows the formation of a quasi-fused pentacyclic core, which enhances the stacking interactions between the cores. The [2]catenane has chiro-optical and fluorescent properties, being also the first known DCC-disulphide-based interlocked molecule to be fluorescent.

An all-donor [2]catenane has been synthesised via dynamic combinatorial chemistry. It features stacked benzodithiophenes which are quasi-pentacyclic through hydrogen bonding.     

Versatile formation of [2]catenane and [2]pseudorotaxane structures; threading and noncovalent stoppering by a self-assembled macrocycle

A self-assembled dimeric macrocycle between 4,4'-bis(4-pyridylmethoxy)biphenyl (L) and (en)Pd(NO(3))(2) was constructed, and its interactions with cyclodextrins of different cavity size resulted in the formation of [2]catenane and [2]pseudorotaxane systems, respectively. The structures were identified by 1D and 2D NMR spectroscopy and cold spray ionization mass (CSI-MS) spectrometry.     

Cyclic [2]Catenane Dimers,Trimers, and Tetramers

Dimeric, trimeric, and tetrameric cyclic [2]catenanes have been prepared directly through one‐pot sodium‐ion‐templated dynamic imine formation from a diamine and a tetraaldehyde. NaBH₄ mediated reduction of the labile imino bonds of these cyclic [2]catenane oligomers, followed by methylation of the resulting secondary amino groups enabled the isolation and characterization of oligomeric cyclic [2]catenanes as stable, covalently linked compounds.     

An interdigitated functionally rigid [2]rotaxane

The synthesis of a functionally rigid [2]rotaxane incorporating pi-electron rich 1,5-disubstituted naphthalene (NP) ring systems, encircled by the pi-electron deficient tetracationic cyclophane, cyclobis(paraquat-p-phenylene), is described; in the solid state, the molecules of this donor-acceptor [2]rotaxane line themselves up in parallel pi-pi stacks of alternating NP ring systems and bipyridinium units, affording an interdigitated superstructure.     

Mechanically Interlocked Chiral Self-Templated [2]Catenanes from 2,6-Bis(1,2,3-triazol-4-yl)pyridine (btp) Ligands

We report the efficient self-templated formation of optically active 2,6-bis(1,2,3-triazol-4-yl)pyridine ( btp ) derived homocircuit [2]catenane enantiomers. This represents the first example of the enantiopure formation of chiral btp homocircuit [2]catenanes from starting materials consisting of a classical chiral element; X-ray diffraction crystallography enabled the structural characterization of the [2]catenane. The self-assembly reaction was monitored closely in solution facilitating the characterization of the pseudo-rotaxane reaction intermediate prior to mechanically interlocking the pre-organised system via ring-closing metathesis.     

Anion-templated assembly of a [2]catenane

The first example of a [2]catenane structure to be synthesized using anion templation is described. The nature of the anion template is demonstrated to be crucial to the assembly process, with only chloride anion producing the [2]catenane in acceptable yield. Anion binding studies reveal a dramatic catenation effect on anion selectivity properties as compared to a noncatenated acyclic receptor.     

Gold(I) macrocycles and topologically chiral [2]catenanes

The design and synthesis of a new type of topologically chiral [2]catenane is reported. The compounds are formed easily by self-assembly on reaction of the oligomeric digold(I) diacetylide precursor complex [[4-BrC(6)H(4)CH(4-C(6)H(4)OCH(2)CCAu)(2)](n)] with diphosphine ligands. Reactions with the diphosphines PP = bis(diphenylphosphinophoshino)acetylene, trans-1,2-bis(diphenylphosphino)ethylene, bis(diphenylphosphino)ethane, and 1,1'-bis(diphenylphosphino)ferrocene yield simple ring complexes [4-BrC(6)H(4)CH(4-C(6)H(4)OCH(2)CCAu)(2)(mu-PP)] as the only products, since the spacer groups in the diphosphines are not long enough or are too bulky to allow catenane formation. Reaction with PP = bis(diphenylphosphino)propane or bis(diphenylphosphino)butane gave [2]catenane complexes [[4-BrC(6)H(4)CH(4-C(6)H(4)OCH(2)CCAu)(2)(mu-PP)](2)], whose structures are confirmed crystallographically. The macrocyclic ring compounds have C(s) symmetry but, as a result of the presence of the unsymmetrical "hinge group" 4-BrC(6)H(4)CH, the [2]catenanes have C(2) symmetry and so are topologically chiral. In favorable cases, the formation of the [2]catenane can be proved by NMR spectroscopy since catenane formation leads to nonequivalence of most ring atoms. The formation of the [2]catenanes was successfully predicted based on the conformation of the precursor bis(phenol), and it is argued that the methods used should be more generally applicable to the synthesis of functionally substituted supermolecules of interest for application in molecular devices.