A new rhodamine-based fluorescent chemosensor for transition metal cations synthesized by one-step facile condensation

A new rhodamine-based fluorescent chemosensor (1) for transition metal cations was synthesized by one-step facile condensation of rhodamine B and 2-aminopyridine. Without metal cations, 1 is colorless and nonfluorescent, whereas addition of metal cations (Fe³⁺, Hg²⁺, Pb²⁺, and Fe²⁺) leads to an obvious color change to pink and an appearance of orange fluorescence.     

Mechanistic investigation of hydrolysis reactions of dithioacetal derivatives grafted on silica gels

Silica gels believed to be grafted with dithioacetal derivatives were recently used for Hg(II) extraction, and were found to selectively remove 94-100% of Hg²⁺ ions from metal ion mixtures. The current studies with one derivative suggest that the functional group in the Hg(II) removal is the mercapto (SH) ligand. The dithioacetal group in (ClCOCH₂S)₂CHPh (2) was hydrolyzed during its reaction with amine (O)₃Si(CH₂)₃NH₂ (3) grafted on silica gel to give the mercapto ligand (O)₃Si(CH₂)₃NHCOCH₂SH (4). The silica gel grafted with the mercapto ligand 4 selectively removed Hg²⁺ ions with reported high capacities.     

Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

New photochromic chemosensors for Hg and F

Two new chemosensors (1a and 1b) based on photochromic dithienylcyclopentene were designed and synthesized, and their spectral behaviors toward various metal ions and anions were investigated in detail. Compounds show excellent optical properties and distinguish Hg²⁺ and F⁻ in CH₃CN. Job’s plot reveals that the presence of Hg²⁺ induces the formation of a 1:1 complex between 1a or 1b and Hg²⁺. From the spectral responses and ¹H NMR analysis, the deprotonation of the thioamide protons is proposed to explain the sensing mechanism for 1a and 1b toward F⁻. It is found that 1a and 1b exhibit ring-opening and ring-closing photoisomerization with UV-vis light irradiation. Furthermore, their photochromic properties can be modulated by Hg²⁺ and F⁻ ions. Moreover, 1a and 1b in photostationary states become promising sensors for Hg²⁺ and F⁻ with high selectivity.     

A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

Highly selective detection of Hg ion by push–pull-type purine nucleoside-based fluorescent sensor

Highly selective detection of Hg²⁺ ion has been achieved using the push–pull-type purine nucleoside-based fluorescent sensor L1. The sensor L1 incorporating aza-18-crown-6 at C6 position of purine nucleoside, is highly sensitive and selective toward Hg²⁺ ion in CH₃CN–H₂O mixture (92/8, v/v). The detection limit for the fluorescent sensor L1 toward Hg²⁺ ion is 7.8 × 10⁻⁸.     

A triphenylamine based multi-analyte chemosensor for Hg and Cu ions in MeCN/H2O

A novel triphenylamine based oxidative chemosensor TOC was synthesized. The chromogenic and fluorogenic behaviors of TOC towards Hg²⁺ and Cu²⁺ ions in a binary mixture of MeCN/H₂O (9/1) were dramatically different. TOC displays colorimetric ‘naked eye’ recognition of Hg²⁺ and fluorogenic ‘turn on’ response towards Cu²⁺ via a unique cyclization reaction using two different detection modes. Moreover, TOCAZOL obtained from the oxidative cyclization reaction of TOC with Cu(ClO₄)₂ can be used as a selective fluorescent sensor toward Hg²⁺ ion.     

Dual colorimetric sensoring bis(indolyl)calix[4]crown-6

Calix-chromophore, bis(indolyl)calix[4]crown-6 (1) in an oxidized form showing selective colorimetric changes for both alkaline earth cations and F⁻ in CH₃CN, has been newly synthesized. It is observed that the binding ability of 1 for the Ca²⁺ binding enhances in the presence of F⁻. Compound 1 can operate three independent combinational NOR logic gates toward metal cations and anions.     

Two dansyl fluorophores bearing amino acid for monitoring Hg in aqueous solution and live cells

A series of compounds (1-4) bearing one or two dansyl fluorophore(s) based on a Lys amino acid were synthesized in solid phase synthesis. Among them, two dansyl labeled Lys amino acid 3 detected Hg²⁺ in a 100% aqueous solution with high sensitivity (K_d=4.3 nM) via a turn-on response. Compound 3 was applied for monitoring Hg²⁺ in environmental and biological fields. 3 showed a hypersensitive response to Hg²⁺ without interferences from other metal ions and satisfied the requirements for monitoring the maximum allowable level (2 ppb) of mercury ions in drinking water demanded by EPA. In addition, 3 penetrated living HeLa cells and detected intracellular Hg²⁺. The organic spectroscopic data revealed the two sulfonamide and amide groups of 3 played a key role in stabilizing the 3-Hg²⁺ complex.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

A logic gate-based fluorogenic probe for Hg detection and its applications in cellular imaging

A new colorimetric and fluorogenic probe (RN₃) based on rhodamine-B has been successfully designed and synthesized. It displays a selective response to Hg²⁺ in the aqueous buffer solution over the other competing metals. Upon addition of Hg²⁺, the solution of RN₃ exhibits a ‘naked eye’ observable color change from colorless to red and an intensive fluorescence with about 105-fold enhancement. The changes in the color and fluorescence are ascribed to the ring-opening of spirolactam in rhodamine fluorophore, which is induced by a binding of the constructed receptor to Hg²⁺ with the association and dissociation constants of 0.22 × 10⁵ M⁻¹ and 25.2 μM, respectively. The Job's plot experiment determines a 1:1 binding stoichiometry between RN₃ and Hg²⁺. The resultant “turn-on” fluorescence in buffer solution, allows the application of a method to determine Hg²⁺ levels in the range of 4.0–15.0 μM, with the limit of detection (LOD) calculated at 60.7 nM (3σ/slope). In addition, the fluorescence ‘turn-off’ and color ‘fading-out’ happen to the mixture of RN₃-Hg²⁺ by further addition of I⁻ or S²⁻. The reversible switching cycles of fluorescence intensity upon alternate additions of Hg²⁺ and S²⁻ demonstrate that RN₃ can perform as an INHIBIT logic gate. Furthermore, the potential of RN₃ as a fluorescent probe has been demonstrated for cellular imaging.     

Heavy metal complexation by N-acyl(thio)urea-functionalized cavitands: synthesis, extraction and potentiometric studies

The synthesis and binding properties of resorcinarene-based cavitands functionalized with N-acylthiourea moieties towards different cations are described. Extraction studies with metal (Pb²⁺, Cu²⁺, Ag⁺, Hg²⁺, Cd²⁺, Eu³⁺, Fe³⁺, K⁺, Na⁺, and Ca²⁺) picrates and the incorporation in ion selective electrodes (ISEs), show that there is more than a 40% increase of the Ag⁺ extraction for N-acylthiourea ionophores (2, 3, and 8) in comparison with N-benzoyl-N′-benzylthiourea (9). Ionophore 8, which has a C₃ chain between the platform and the ionophore, extracts two times more Cu²⁺ than the more rigid one (2). Stoichiometry studies showed for ligand 2 a ligand/metal ratio of 1:1, while for model compound 9 a ratio of 1:2 was found. Potentiometric studies of electrodes revealed that cavitands 2, 3, and 8 induce a significantly different selectivity pattern compared to the cation-exchanger used, as well as model compound 9. Especially, a considerable enhancement of the selectivity towards Ag⁺ and Pb²⁺ over K⁺, Ca²⁺, and Na²⁺ ions was observed.     

Neutral carriers based polymeric membrane electrodes for selective determination of mercury (II)

The potentiometric response characteristics of mercury ion-selective membrane electrodes based on 2-amino-6-purinethiol (I₁) and 5-amino-1, 3, 4-thiadiazole-2-thiol (I₂) were described. Ion selectivities were tested for various plasticizers, which were used as solvent mediators to incorporate the ionophores into the membrane. Effects of experimental parameters such as membrane composition, nature and amount of plasticizers and additives, pH and concentration of internal solution on the potential response of Hg²⁺ electrodes were investigated. The best performance was obtained with the electrode having a membrane composition (w/w) of (I₁) (3.17%): PVC (31.7%): DOP (dioctylpthalate) (63.4%): NaTPB (sodium tetraphenylborate) (1.58%). The proposed electrode reveals a Nernstian response over Hg²⁺ ion in the concentration range of 7.0 × 10⁻⁸-1.0 × 10⁻¹ M with limit of detection 4.4 × 10⁻⁸ M. The electrode shows good discrimination toward Hg²⁺ ion with respect to most common cations. It shows a short response time (10 s) for whole concentration range and can be used for 2 months without any considerable divergence in potentials. For evaluation of the analytical applicability, the electrode was used in the determination of Hg²⁺ ion in different environmental and biological samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.     

Novel versatile imine—enamine chemosensor based on 6-nitro-4-oxo-4H-chromene for ion detection in solution, solid and gas-phase: synthesis, emission, computational and MALDI-TOF-MS studies

A new versatile emissive molecular probe (3) derived from 1,5-bis(2-aminophenoxy)-3-oxopenthane bearing two units of 6-nitro-4-oxo-4H-chromene- has been prepared by a Schiff-base condensation method using conventional and green, ultrasound-aided, methods. The dry yellow powder was characterized as the imine species (3). These imine species, however, where found to rapidly convert to their enamine form (4) in solution, under the presence of water traces. This reaction was computationally studied through Density Functional Theory (DFT) in order to investigate the relative stability of the molecular pair 3/4. The sensing properties of the enamine (4) towards various metal ions were investigated via absorption and fluorometric titrations in solution in dichloromethane, acetonitrile and DMSO. The compound shows a fluorescent turn-off response in the presence of Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Ag⁺ over the other metal ions studied, such as Li⁺, Na⁺, K⁺, Ca²⁺, Co²⁺ and Ni²⁺, being stronger for Cu²⁺ and Hg²⁺. The gas phase chemosensing abilities of (3) were also explored suggesting (3) as new active MALDI-TOF-MS matrix by two dry methods showing a strong selectivity towards Cu²⁺ and Ag⁺. Our preliminary results show promising uses of (3) supported in PPMA films as metal ion solid chemosensor.     

Azo 8-hydroxyquinoline benzoate as selective chromogenic chemosensor for Hg and Cu

Azo 8-hydroxyquinoline benzoate (2) was synthesized and studied to detect metal ions. Distinct color change was found for compound 2 in the presence of transition metal ions Hg²⁺ or Cu²⁺ in CH₃CN, respectively, which makes it possible for distinguishing Hg²⁺ and Cu²⁺ from other metal ions by the ‘naked eye’.     

Ferrocene-based novel electrochemical chemodosimeter for mercury ion recognition

A new ferrocene-based electrochemical chemodosimeter (1) for mercury(II) ion was prepared and characterized by X-ray crystal analysis. Among various metal ions, 1 displays highly selective electrochemical signaling changes for Hg²⁺ over other metal ions in regard to a mercury-promoted intramolecular cyclic guanylation of thiourea.     

Synthesis,characterization and metal ion complexation and extraction capabilities of calix[4]arene Schiff base compounds

The syntheses, characterization and metal ion complexation and extraction capabilities of six new calix[4]arene Schiff base compounds, 5–10, are reported. The preparation of the compounds was achieved by the condensation of 5,17-diamino-11,23-di-tert-butyl-25,27-di-n-butoxy-26,28-dihydroxycalix[4]arene with the appropriate aldehyde (5-bromosalicylaldehyde for 5, 4-anisaldehyde for 6, 4-(dimethylamino)benzaldehyde for 7, 9-anthracenecarboxaldehyde for 8, 1-pyrenecarboxaldehyde for 9, and 9-fluorenecarboxaldehyde for 10) in refluxing ethanol. The compounds were characterized by ¹H and ¹³C NMR spectroscopy, IR spectroscopy, high-resolution mass spectrometry and elemental analysis. The X-ray crystal structures of 7, 8 and 9 (as dichloromethane solvates) revealed that the calixarene molecules adopt H-bond stabilized, distorted-cone conformations and form centrosymmetric dimers in the solid state. Compounds 5–10 did not form host–guest complexes with NEt₄[(bdt)MoO₂(OSiPh₃)] (bdt^2–=benzene-1,2-dithiolate), a potential precursor for biologically relevant oxosulfido-Mo(VI/V) enzyme models; such host–guest complexes have the potential to stabilize these sought-after but highly reactive model compounds. In addition, the capabilities of 5–10 to extract selected metal ions (Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Cd²⁺ and Hg²⁺) from an aqueous into an organic phase have been assessed by picrate extraction experiments. Compound 5 displayed exceptional selectivity towards Ni²⁺, compound 7 exhibited enhanced extraction towards all of the metal ions tested and compounds 6, 9 and 10 showed very high selectivity towards Hg²⁺. On the other hand, compound 8 exhibited negligible capacity to extract any of the metal ions tested.     

A reversible fluorescent–colorimetric Schiff base sensor for Hg ion

A simple (R)-(−)-2-phenylglycinol functionalized Schiff base L1 and its characterization as a fluorescent–colorimetric sensor for Hg²⁺ ion are described. The UV–vis and fluorescence analysis in methanol and aqueous solution show complex formation between L1 and Hg²⁺ ion with a micromolar association constant. Competition experiments performed for the acetate salts of Hg²⁺, Zn²⁺, Co²⁺, Pb²⁺, Cd²⁺, Mn²⁺, Cu²⁺, Ni²⁺, and Ba²⁺ revealed that compound L1 exhibits high selectivity toward Hg²⁺ displaying a color change easily detectable by naked-eye and a turn-off fluorescent effect due to a chelation-enhanced quenching (CHEQ) mechanism. Moreover, addition of EDTA to L1–Hg²⁺ recovers the fluorescence and color offering receptor L1 as a reversible sensor for real-time applications.     

A specific and ratiometric chemosensor for Hg based on triazole coupled ortho-methoxyphenylazocalix[4]arene

Calix[4]arene 3, which contains two distal triazole groups on the lower rim and two distal o-methoxyphenylazo groups on the upper rim, was synthesized and found to be a specific and ratiometric sensor for Hg²⁺ in a polar protic solvent. A series of o-methoxyphenylazo derivatives (3, 4, 5, 7, and 9) were synthesized, which proved that the lower-rim triazoles and the hydroxyl azophenol(s) were the major ligands for metal ion binding. Though analogues 4 and 10 showed some sensitivity for Hg²⁺, compound 3 was the only ratiometric chemosensor for Hg²⁺ among the series of azocalix[4]arenes synthesized in this work. The formation of 3·Hg²⁺ complex was supported by UV/vis and NMR titration studies and Mass spectrometry. Based on the symmetrical features of NMR spectra of 3·Hg²⁺, the complex is believed to be symmetrical with respect to the calix[4]arene cavity. Furthermore, the complex was determined to be 1:1 binding stoichiometry by Job’s plot, and the association constant was determined to be 4.02×10³ M⁻¹ using Benesi-Hildebrand plot.     

Highly selective and sensitive fluorescent chemosensor for Hg in aqueous solution

A new indole-based fluorescent chemosensor 1 was prepared and its metal ion sensing properties were investigated. It exhibits high sensitivity and selectivity toward Hg²⁺ among a series of metal ions in H₂O-EtOH (7:1, v/v). The association constant of the 1:1 complex formation for 1-Hg²⁺ was calculated to be 9.57 × 10³ M⁻¹, and the detection limit for Hg²⁺ was found to be 2.25 × 10⁻⁵ M. Computational results revealed that 1 and Hg²⁺ ion formed with a central tetrahedron-coordinated Hg²⁺.