Molecular recognition of l-leucyl-l-alanine: enantioselective inclusion of alkyl methyl sulfoxides

A simple aliphatic dipeptide, l-leucyl-l-alanine (Leu-Ala), includes several alkyl methyl sulfoxides enantioselectively to form inclusion crystals. From single-crystal X-ray analyses of three inclusion compounds of dimethyl sulfoxide (DMSO), isobutyl methyl sulfoxide, and benzyl methyl sulfoxide, it was elucidated that Leu-Ala molecules self-assemble to form layer structures and the sulfoxides are included via hydrogen bonding in a cavity between these layers. The inclusion cavity has methyl group and isobutyl group at its each side, and the guest sulfoxide is placed in such a manner that its methyl group faces toward the methyl of the Leu-Ala cavity. When the alkyl group of the sulfoxide is comparably large, it is located in the residual space of the cavity to attain effective crystal packing. Thus, the sulfoxides having a comparably large group such as isobutyl, butyl, and benzyl are included with a high (R)-enantioselectivity in Leu-Ala crystals.     

Inclusion of aliphatic alcohols in pockets of (S)-threonyl-(S)-phenylglycine using grinding method

Inclusion compounds of a dipeptide, (S)-threonyl-(S)-phenylglycine (Thr-Phg), with several aliphatic alcohols were easily prepared by grinding them in a mortar. Thr-Phg molecules arranged in antiparallel to construct a sheet, and guest alcohols were accommodated in a chiral pocket between the sheets. 3-Butyn-2-ol and 2-butanol were included with moderate enantioselectivity, 57% ee (R) and 49% ee (R), respectively. The role of the hydroxy group of Thr-Phg is not only to construct the unique pocket but also to capture guest alcohols by hydrogen bonding.     

Enantioselective inclusion of (R)-phenylglycyl-(R)-phenylglycine with benzyl methyl sulfoxides

A crystalline dipeptide, (R)-phenylglycyl-(R)-phenylglycine (RR-1), recognized p-halobenzyl methyl sulfoxides with high R-enantioselectivity (86–99% ee) to form inclusion compounds. The single-crystal X-ray analyses showed that RR-1 molecules are arranged in parallel and zigzags via hydrogen bonding to construct a pleated sheet. The guest molecules that form hydrogen bond with ⁺NH₃ of RR-1 are accommodated in the channel cavity between the layers. In contrast to the inclusion crystals of parent benzyl methyl sulfoxide, in which a rectangular cavity is formed, the cavity including p-halobenzyl methyl sulfoxides becomes rhomboidal. We also examine the guest exchange in these inclusion compounds and it was found that the guest exchanges occur when the host structure changes.     

Synthesis of l,l-puromycin

l,l-Puromycin, a diastereomer of the natural peptidyl nucleoside antibiotic puromycin, has been synthesized from l-xylose in 13 steps.     

Phase behavior of biodegradable amphiphilic poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide)

This study describes the miscibility phase behavior in two series of biodegradable triblock copolymers, poly(l-lactide)-block-poly(ethylene glycol)-block-poly(l-lactide) (PLLA-PEG-PLLA), prepared from two di-hydroxy-terminated PEG prepolymers (M_n = 4000 or 600 g mol⁻¹) with different lengths of poly(l-lactide) segments (polymerization degree, DP = 1.2-145.6). The prepared block copolymers presented wide range of molecular weights (800-25,000 g mol⁻¹) and compositions (16-80 wt.% of PEG). The copolymer multiphases coexistance and interaction were evaluated by DSC and TGA. The copolymers presented a dual stage thermal degradation and decreased thermal stability compared to PEG homopolymers. In addition, DSC analyses allowed the observation of multiphase separation; the melting temperature, T_m, of PLLA and PEG phases depended on the relative segment lengths and the only observed glass transition temperature (T_g) in copolymers indicated miscibility in the amorphous phase.     

A tethered aminohydroxylation route to l-arabino-[2R,3S,4R] and l-xylo-[2R,3S,4S]-C18-phytosphingosines

A concise and highly efficient synthesis of l-arabino-[2R,3S,4R] and l-xylo-[2R,3S,4S]-C₁₈-phytosphingosines has been achieved. The synthetic strategy features the Sharpless kinetic resolution and tethered aminohydroxylation as the key steps.     

Characterization and release of triptolide-loaded poly (d,l-lactic acid) nanoparticles

Triptolide (TP), which has immunosuppressive effect, anti-neoplastic activity, anti-fertility function and severe toxicities on digestive, urogenital, blood circulatory system, was used as a model drug in this study. TP-loaded poly (d,l-lactic acid) (PLA) nanoparticles were prepared by the modified spontaneous emulsification solvent diffusion method (modified-SESD method). Dynamic light scattering system (DLS), transmission electron microscope (TEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), X-ray powder diffractometry and Fourier transform infra-red spectroscopy (FT-IR) were employed to characterize the nanoparticles fabricated for size and size distribution, surface morphology, the physical state of drug in nanoparticles, and the interaction between the drug and polymer. Encapsulation efficiency (EE) and the in vitro release of TP in nanoparticles were measured by the reverse phase high-performance liquid chromatography (RP-HPLC). The produced nanoparticles exhibited a narrow size distribution with a mean size of approximately 150 nm and polydispersity index of 0.088. The morphology of the nanoparticles exhibited a fine spherical shape with smooth surfaces without aggregation or adhesion. TP-entrapped in nanoparticles was found in the form of amorphous or semicrystalline. It was found that a weak interaction existed between the drug and polymer. In all experiments, more than 65% of EE were obtained. The in vitro release profile of TP from nanoparticles exhibited a typical biphasic release phenomenon, namely initial burst release and consequently sustained release. In this case, the particle size played an important role for the drug release. The modified-SESD method was a potential and advantage method to produce an ideal polymer nanoparticles for drug delivery system (DDS).     

Synthesis of d-glucose and l-phenylalanine substituted phenylene-thiophene oligomers

Phenylene-thiophene oligomers bearing peracetylated β-d-glucose or N-BOC-l-phenylalanine as chiral substituents were synthesized in good yields by a versatile protocol based on the Suzuki-Miyaura cross-coupling reaction. Aryl iodides bearing the chiral biomolecules as substituents efficiently reacted with pinacol boronates of bi- or terthiophenes leading to the bio-functionalized oligomers in good yields.     

Tetrahydrofuran-mediated radical processes: stereoselective synthesis of d,l-hexestrol

The highly stereoselective synthesis of d,l-hexestrol (1), an inhibitor of microtubule assembly, is developed by using, as a key step, an intermolecular coupling of Co₂(CO)₆-complexed propargyl radicals. The latter are generated by novel complementary processes involving an interaction of tetrahydrofuran with Co₂(CO)₆-complexed propargyl alcohols and cations. An isomerically pure d,l-μ-η²-[3,4-di(4-methoxyphenyl)-1,5-hexadiyne]-bis-dicobalthexacarbonyl (d,l-6) is isolated in 69-91% yield with intermolecular coupling reactions exhibiting an excellent chemo- (0.5-7%) and d,l-diastereoselectivity (90-94%). The structure of d,l-6 is determined by X-ray diffraction. The subsequent steps include BBr₃-induced demethylation of 4-methoxyaryl groups, demetalation with cerium(IV) ammonium nitrate, and hydrogenation of acetylenic termini affording d,l-hexestrol (1).     

Simple approach to 1-O-protected (R)- and (S)-glycerols from l- and d-arabinose for glycerol nucleic acids (GNA) monomers research

5-O-Protected (-Tr, -Sitert-BuPh₂) d- and l-arabinofuranoses easily available in multigram quantities were converted to (S)- and (R)-1-O-protected glycerols, respectively, via oxidation (NaIO₄) and reduction (NaBH₄). Sources of chirality in the targets are the C4 atoms in the substrates. This stereospecific procedure permits a very simple access to both enantiomeric 1-O-protected glycerols for GNA monomers work.     

Prevailing mechanisms of the hydrolytic degradation of oligo(d,l-lactide)-grafted dextrans

The predominant mechanism of the hydrolytic degradation of oligo(d,l-lactide)-grafted dextrans in phosphate buffer was followed by quantifying both released dextran and lactic acid from the copolymers. The studied amphiphilic copolymers, with well-defined structure, exhibited various oligo(d,l-lactide) weight fractions (F^OLA) while having a quite high extent of free hydroxyl groups (>90%). Depending on their F^OLA, oligo(d,l-lactide)-grafted dextrans were soluble either in water or in organic solvents (THF, toluene, …) and different prevailing mechanisms of hydrolytic degradation were observed. The copolymer soluble in THF, with longer oligo(d,l-lactide) grafts and higher F^OLA, was found to degrade via a particular mechanism by which the greatest part of dextran was released into buffer medium during the first two weeks of degradation. During the initial stage of degradation, the hydrophilicity of dextran backbone was considered to be the main driving force for the hydrolytic cleavage of the ester linkage between backbone and grafts. Released oligo(d,l-lactide) grafts were found to be degraded via chain-end degradation or random degradation depending on their solubility in buffer medium. In case of water-soluble copolymers with shorter oligo(d,l-lactide) grafts and lower F^OLA, the chain-end degradation was exclusively observed.     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

Swelling and hydrolytic degradation of poly(d,l-lactic acid) in aqueous solutions

Low molecular weight poly(lactic acid) was synthesized by direct polycondensation of lactic acid. The oligomers were characterized by viscometry, light scattering, and gel permeation chromatography (GPC). The swelling behaviour of tablets made of the above polymer immersed in buffer solutions at 37 °C was studied. In the same experiments, the hydrolytic stability of d,l-PLA was assessed by measuring the weight loss after drying the tablets. In order to inhibit any degradation due to bacteria, formaldehyde was added in the solution as biostatic factor. The effect of an incorporated drug on the swelling behaviour of d,l-PLA tablets was also considered. It was found that the incorporation of drug in d,l-PLA tablets increases their swelling index, probably due to the creation of additional porosity in the specimens or other interaction between drug and polymeric matrix.     

Melt spinning of poly(l/d)lactide 96/4: Effects of molecular weight and melt processing on hydrolytic degradation

This study focused on determining the effects of molecular weight on the degradation of polylactide 96l/4d in melt spinning and the effects of melt processing on hydrolytic degradation. Three polylactides with different inherent viscosities were melt spun, and the fibres were studied in vitro. Results showed that during melt spinning high-molecular-weight polylactide degraded because polymer chains were subject to high shear stress and high melt temperatures, whereas a low-molecular-weight polylactide with low melt viscosity was not affected by melt processing. Most degradation occurred during the melting phase in the length of the extruder barrel. Lactide monomer, generated as the polymer degraded in the melt, significantly affected in vitro degradation such that the degradation rate was directly proportional to the lactide concentration of the polymer.     

Synthesis of l-aminohomohistidine (l-Ahh)

A short synthesis of l-aminohomohistidine (l-Ahh), which starts from readily available δ-hydroxy-l-lysine is described. The embedding of the basic guanidino moiety in the aromatic imidazole lowers the basicity of the side chain to a pK_a of 8.3. It is proposed that l-Ahh may be employed as an arginine-mimetic in medicinal chemistry.     

New building blocks for peptide and depsipeptide synthesis: hexafluoroacetone protected l-homoisoserine and d,l-homoisocysteine derivatives

Efficient syntheses of l-homoisoserine and d,l-homoisocysteine derivatives starting from l-malic and d,l-thiomalic acid using hexafluoroacetone as protecting and activating agent are described. The new compounds are interesting building blocks for the preparation of non-natural peptides and depsipeptides as well as for the construction of new GABA derivatives.     

Effects of mechanical load on the degradation of poly(d,l-lactic acid) foam

Degradable behaviors of polymer for implantation in body should be evaluated before clinical application. The effect of continuous mechanical load on the degradation progress of poly(d,l-lactic acid) (PDLLA) foam gasket was investigated in detail by specially designed load-providing devices. While PDLLA degraded in the PBS solution (pH, 7.4) at 37 °C for 3 months, the changes of surface morphology, molecular weight, elastic modulus, tensile strength and mass loss were recorded. The results revealed that the degradation rates of PDLLA under continuous loads were obviously quicker than those without load. Moreover, the influence of tensile plus compressive load was larger than that of tensile load. It was indicated that in vivo degradation of PDLLA would not only be influenced by the local solution, but also by the surrounding load. When regulating the degradation rate of bioabsorbable polymer, one should consider the indispensable effect of load where implanted.     

Influence of cellulose nanowhiskers on the hydrolytic degradation behavior of poly(d,l-lactide)

This paper reports the preparation of bionanocomposites based on poly(d,l-lactide) and cellulose nanowhiskers (PDLLA/CNWs) and studies the influence of the CNWs on the hydrolytic degradation behavior of the polylactide. The hydrolytic degradation process was studied in a phosphate buffer medium through the sample weight loss and also by FTIR, DSC and TGA measurements. The presence of CNWs induced a strong delay in the hydrolytic degradation of the PDLLA, even when the concentration of the nanofillers was only 1%. This effect was related to the physical barrier created by the highly crystalline CNWs that inhibited water absorption and hence retarded the hydrolytic degradation of the bionanocomposites. In addition, the incorporation of cellulose nanocrystals in the PDLLA also made the biopolymer more thermally stable, increasing the initial temperature of mass loss even after the degradation in phosphate medium. The results presented here show the possibility of controlling the biodegradability and prolonging the service life of a polylactide through the incorporation of a small quantity of nanofillers obtained from renewable materials.     

Interactions between Ni ions and tetrapeptides containing (Asp/Lys)HisGly(l/d)His sequence

A series of linear tetrapeptides containing two histidyl residues in positions 2 and 4 with different chirality: DHGH, DHG(d-His), KHGH, KHG(d-His), Ac-DHGH-NH₂, Ac-DHG(d-His)-NH₂, Ac-KHGH-NH₂, and Ac-KHG(d-His)-NH₂ were synthesized, characterized and their binding properties towards Ni²⁺ were investigated. To establish the stoichiometry and the stability of the resulting Ni²⁺ complexes, potentiometric titrations were carried out. The coordination mode of the complexes formed was investigated by performing extensive spectroscopic analyses (UV–Vis, CD) in strict correlation with the potentiometric results. The effects of the nature of the first amino acid (Lys versus Asp) and of the N-terminal amino group acetylation were determined. A careful comparison of the Ni²⁺ coordination abilities of the linear peptides provides a specific insight into the impact of the chirality of the C-terminal histidine residue (His⁴) on the metal binding properties.     

Experimental and theoretical studies on inversion dynamics of dichloro(l-difluoromethionine-N,S)platinum(II) and dichloro(l-trifluoromethionine-N,S)platinum(II) complexes

Fluorinated analogues of methionine such as l-S-(difluoromethyl)homocysteine (l-difluoromethionine; DFM) and l-S-(trifluoromethyl)homocysteine (l-trifluoromethionine; TFM) have been demonstrated to be interesting analogues for incorporation into peptides and proteins. The presence of the fluorine nucleus adjacent to the sulfur atom in the side chain not only serves to alter the nucleophilicity and electron density of the sulfur atom but it can function as an important NMR spectroscopic (¹⁹F) probe. Additional information on the properties of these fluorinated amino acid analogues was obtained by studying their interactions with dipotassium tetrachloroplatinate (K₂PtCl₄). The resulting complexes, dichloro(l-difluoromethionine-N,S)platinum(II) and dichloro(l-trifluoromethionine-N,S)platinum(II) were investigated with respect to their sulfur inversion rates utilizing dynamic NMR methods. Inversion barriers for the DFM- and TFM-platinum complexes were experimentally determined to be 16.4 ± 0.2 and 18 ± 1 kcal/mol, respectively. Density functional calculations at the B3LYP/SDD level were also performed to model the structures and energies of the ground and transition states for these complexes.