A facile procedure for synthesis of 3-[2-(N,N-dialkylamino)ethyl]-3-fluorooxindoles by direct fluorination of N,N-dialkyltryptamines

A practical procedure for the synthesis of 3-fluorooxindole derivatives having basic amine moieties was developed, which involves Selectfluor™-mediated oxidative fluorination of N,N-dialkyltryptamines in the presence of Lewis acid. This procedure was applied to an antimigraine drug, rizatriptan, to afford the corresponding 3-fluorooxindole, which is a potential fluorine-containing drug candidate.     

Stereoselective fluorination of methylenecyclopropanes with N-F reagents: A modular entry to γ-fluorohomoallylic sulfonimides and γ-fluorohomoallylic amides

A convenient and efficient method for fluorination of methylenecyclopropanes is reported. This is exemplified in the stereoselective preparation of N-[(E)-3-fluorobut-3-en-1-yl]-benzenesulfonimides by the reaction of methylenecyclopropanes with N-fluorobenzenesulfonimide in good to excellent yields. Moreover, γ-fluorohomoallylic amides are synthesized using Selectfluor in R₃CN at 60 °C.     

Fluorination of activated aromatic systems with Selectfluor™ F-TEDA-BF4 in ionic liquids

Selectfluor™ was shown to be soluble in ionic liquid, thus allowing the ‘green’ electrophilic fluorination of activated aromatic systems compounds in high chemoselectivity and yields.     

Pd(PPh3)4-catalyzed direct ortho-fluorination of 2-arylbenzothiazoles with an electrophilic fluoride N-fluorobenzenesulfonimide (NFSI)

An efficient protocol was developed for regio-selective Pd-catalyzed direct ortho-fluorination of 2-arylbenzo[d]thiazoles using N-fluorobenzenesulfonimide (NFSI) as the F⁺ source, and l-proline as the crucial promoter. The present method offered a practical route to synthesize valuable fluorinated products, which are of potential importance in the pharmaceutical and agrochemical industries.     

Solvent-free fluorination of organic compounds using N-F reagents

Efficient fluorination of 1,3-dicarbonyl compounds, enol acetates of aromatic ketones, and activated aromatic compounds was achieved under solvent-free conditions using Selectfluor™ F-TEDA-BF₄ or Accufluor™ NFSi.     

Fluorination of fluoro-cyclobutene with high-valency metal fluoride

Fluorinations of 1,4,4-trifluorocyclobutene and 3,3,4,4-tetrafluorocyclobutene using high-valency metal fluorides such as CoF₃, MnF₃, AgF₂, CeF₄ and KCoF₄, and elemental fluorine were examined. In these reactions with CoF₃ and MnF₃, vic-difluorination proceeded mainly. While, 1,4,4-trifluorocyclobutene yielded 3,3,4,4-tetrafluorocyclobutene, and 3,3,4,4-tetrafluorocyclobutene yielded 1,3,3,4,4-pentafluorocyclobutene mainly in the case of AgF₂. The further fluorinated products were increased under severer conditions. Also, the plausible reaction mechanism was suggested.     

Fluorination of alcohols and diols with a novel fluorous deoxy-fluorination reagent

We prepared a novel fluorous deoxy-fluorination reagent N,N-diethyl-α,α-difluoro-[3,5-bis(1H,1H,2H,2H-perfluorodecyl)benzyl]amine (1b) from 3,5-diiodobenzoic acid (3b) via N,N-diethyl-3,5-bis(1H,1H,2H,2H-perfluorodecyl)benzamide (2b) in four steps and used it for the fluorination of alcohols and diols. After the fluorination reactions, the isolation of the products and recovery of 2b was performed by extraction with a fluorous/organic solvent system.     

10-Oxo-10H-5λ,10λ-thianthren-5-ylideneamine as a probe for stereochemistry in the formation and amination of fluoro-λ-sulfanenitriles

The fluorination of 10-oxo-10H-5λ⁴,10λ⁴-thianthren-5-ylideneamine (2) with Selectfluor™ affords 5-fluoro-10-oxo-5,10-dihydro-5λ⁶,10λ⁴-thianthren-5-nitrile (4). The amination of 4 with morpholine gives 5-morpholino-10-oxo-5,10-dihydro-5λ⁶,10λ⁴-thianthren-5-nitrile (5). The stereochemical course of both reactions has been studied, while the configurations of their products, cis-isomer 4 and trans-5-morpholino-10-oxo-5,10-dihydro-5λ⁶,10λ⁴-thianthren-5-nitrile (trans-5) are elucidated by the use of X-ray crystallographic analyses.     

Selectfluor™: a novel and efficient reagent for the synthesis of β-hydroxy thiocyanates

A variety of epoxides undergo rapid ring opening with ammonium thiocyanate in the presence of 10 mol % Selectfluor™ in acetonitrile at room temperature to afford the corresponding β-hydroxy thiocyanates in excellent yields with high regioselectivity.     

Fluorination of poly(p-phenylene) using TbF4 as fluorinating agent

The fluorination using TbF₄ as fluorinating agent was successfully performed on poly(p-phenylene). The method allows the fluorine content of the polymer to be controlled and the formation of structural defects, such as dangling bonds, to be significantly decreased by comparison with the direct fluorination using pure F₂ gas. The aromatic character of the phenyl ring is partly maintained through the fluorination contrary to the direct fluorination (using pure F₂ gas), for which a quasi-perfluorination and a partial decomposition of the polymer occur. Complementary analytical techniques have been used, such as ¹⁹F and ¹³C solid state NMR, FT-IR and EPR to compare the samples as a function of the reaction conditions.     

Synthesis of difluorinated β-ketosulfones and novel gem-difluoromethylsulfone-containing heterocycles as fluorinated building blocks

A series of new heterocyclic β-ketosulfides was prepared by the reaction of the corresponding heterocyclic thiols with α-bromoacetophenone and its derivatives. Oxidation of the products using m-CPBA gave the corresponding heterocyclic β-ketosulfones, which, on treatment with Selectfluor™ under anhydrous condition underwent electrophilic fluorination resulting in new heterocycles with difluoromethylene moiety adjacent to the sulfur atom and the carbonyl group. Base-induced cleavage of the five types of the resulting products, with different heterocyclic moieties as model compounds, afforded the difluoromethyl sulfones attached to the corresponding heterocycles. They can be considered as interesting fluorinated building blocks for further elaborations.     

New preparation method for Vilsmeier reagent and related imidoyl chlorides

An environmentally benign and inexpensive preparation method is described of some imidoyl chlorides, including the Vilsmeier reagent (VR), by using phthaloyl dichloride. Synthetic applications were demonstrated using the isolated VR or VR prepared in situ for the transformation of acids to acid chlorides, alcohols to chlorides, and the formylation of dimethylaminobenzene.     

Direct iodination of indanone and tetralone derivatives by elemental iodine activated by Selectfluor™ F-TEDA-BF4

Derivatives of indan-1-one and 3,4-dihydronaphthalen-1(2H)-one bearing hydroxy or methoxy substituent on the aromatic ring were efficiently iodinated regioselectively at the α carbonyl position using elemental iodine activated by 1-chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor™ F-TEDA-BF₄) in methanol.     

Spin trapping of alkoxyl radicals generated from 5-methyl and 5-aryl-3-alkoxy-4-methylthiazole-2(3H)-thiones in photochemically induced and microwave-initiated reactions

Methoxyl and isopropoxyl radicals were generated from N-alkoxy-4,5-dimethylthiazole-2(3H)-thiones (λ_max∼320 nm) and 5-aryl derivatives (aryl=p-XC₆H₄; X=MeO, H, AcNH, Cl) (λ_max∼335 nm) in photochemically and microwave-induced reactions. Alkoxyl radicals were trapped with dimethylpyrrolidine N-oxide and characterized as spin adducts via EPR. Cumyloxyl radicals were liberated in a similar manner from N-cumyloxy-5-(4-methoxyphenyl)-4-methylthiazole-2(3H)-thione. A noteworthy bathochromic shift was found for the lowest energy transition of N-(hydroxy)indeno[2,1-d]thiazole-2(3H)-thione (λ_max=376 nm), if compared to the UV-vis absorption of N-hydroxy-4-methyl-5-phenylthiazole-2(3H)-thione (λ_max=338 nm). Syntheses of alkoxyl radical precursors and procedures for conducting N,O-homolysis are described in a full account.     

Cyclization of protected N-acylhydroxyguanidine to 3-amino-1,2,4-oxadiazole

The acid mediated cyclization of a protected N-acylhydroxyguanidine into the corresponding 3-amino-1,2,4-oxadiazole and confirmation of its structure by single crystal X-ray crystallography is reported herein. The yield of the cyclization is comparable to literature reports utilizing alternative procedures. Importantly, these new conditions provide complementary chemoselectivity to current synthetic procedures which may be useful for the synthesis of 3-amino-1,2,4-oxadiazoles in general.     

Syntheses and structures of zinc and tin(II) compounds with hemilabile N-silyl-tert-butylamido and N-silyl-p-tolylamido ligands that contain pendent tert-butoxy groups

Syntheses and solid-state structures of zinc and tin(II) compounds, containing the N-silyl-amide ligands (O^tBu)(NR)SiMe₂, R = ^tBu (L^tBu), or R = p-tolyl (L^pTol), are reported. The N-silyl amines were synthesized by modified published procedures from commercially available Me₂SiCl₂, ^tBuOH, and ^tBuNH₂, or p-Me-C₆H₄NH₂, respectively. Treatment of SnCl₂ with LiL^pTol furnished Sn(L^pTol)₂, which was X-ray structurally characterized and shown to contain two covalent Sn-N bonds and two asymmetrical O → Sn donor bonds. The single-crystal X-ray structure of Sn(L^tBu)₂ revealed a much more symmetrically-coordinated, pseudo-trigonal-bipyramidal tin atom. Aminolysis of diethylzinc with HL^pTol produced [EtZn(L^pTol)]₂, which crystallized as a centrosymmetric dimer, containing four-coordinate zinc atoms connected by bridging amides. Zinc dichloride, by contrast, reacted with two equivalents of LiL^tBu to produce the homoleptic, pseudo-spirocyclic Zn(L^tBu)₂.     

Oxidation of disulfides with Selectfluor™: concise syntheses of thiosulfonates and sulfonyl fluorides

The reaction of aromatic or benzylic disulfides with 2.5 equiv of Selectfluor™ in acetonitrile/water (10:1) at room temperature efficiently produced the corresponding thiosulfonates. On the other hand, the reaction of disulfides with 6.5 equiv of Selectfluor™ in refluxing acetonitrile/water (10:1) provided sulfonyl fluoride in high yields.     

Nuclear fluorination of 3,5-diarylisoxazoles with Selectfluor

C-4 Fluorination of a series of 3,5-diarylisoxazoles has been accomplished using the N-F reagent Selectfluor^®. With substrates containing neutral or activating substituents on the 5-phenyl ring, acetonitrile at room temperature or at reflux could be used as solvent. However, when deactivating substituents were present, a higher reaction temperature was required for which sulfolane was found to be a good solvent. At this higher temperature, a unique trifluorination of the isoxazole nucleus by an addition mechanism occurred as a side reaction.     

The use of Nafion-H®/NaNO2 as an efficient procedure for the chemoselective N-nitrosation of secondary amines under mild and heterogeneous conditions

A combination of Nafion-H® and sodium nitrite in the presence of wet SiO₂ was used as an effective agent for the N-nitrosation of secondary amines under mild and heterogeneous conditions in good to excellent yields.     

Microwave assisted solid additive effects in simple dry chlorination reactions with n-chlorosuccinimide

Solid additives participate in the dry microwave assisted chlorination reaction of N-chlorosuccinimide with the xylenes affecting both yields and chemoselectivities. Total yields can be increased up to nine times for simple alkylaromatics and chemoselectivities can be altered according to the desired ring or α-side chlorination product by choosing the appropriate additive. We believe that in these reactions the solid additives play a very important role by increasing yields and affecting chemoselectivities, as well as behaving as microwave energy absorbers that consequently aid the transfer of heat to the active reagents.