Ir(PPh3)2(H)2(ClCH2CH2Cl)][BArF4]: a well characterised transition metal dichloroethane complex

Reaction of [Ir(PPh(3))(2)(COD)][BAr(F)(4)] with H(2) in dichloroethane solution results in [Ir(PPh(3))(2)(H)(2)(ClCH(2)CH(2)Cl)][BAr(F)(4)], which has been fully characterised by X-ray crystallography, NMR spectroscopy and ESI-MS. Its activity towards alkene hydrogenation has been compared with analogous CH(2)Cl(2) complexes.     

Nitric oxide photorelease from ruthenium salen complexes in aqueous and organic solutions

The complexes [Ru(salen)(NO)Cl] and [Ru(salen)(NO)(H(2)O)](+) were shown to release the nitrosyl ligand as nitric oxide upon exposure to visible light in organic and aqueous solutions respectively, by means of UV-visible, EPR, and FTIR spectroscopies. The former was prepared by a new synthetic route and had its structure determined by single-crystal X-ray diffraction. A crystal of the dichloromethane solvate is orthorhombic, space group Fdd2 (No. 43) and formula C(16)H(14)ClN(3)O(3)Ru.CH(2)Cl(2), with Z = 16 and cell parameters a = 25.489(4), b = 33.435(4), and c = 9.3716(9) A. The electronic absorption spectra of the complexes were calculated using the INDO/S method. The water-soluble complex is a potential drug for antitumoral phototreatment.     

Preparation, Molecular and Electronic Structures, and Magnetic Properties of Face-Sharing Bioctahedral Titanium(III) Compounds: [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PR(3))(2)

Reduction of TiCl(4) with 1 equiv of HSnBu(3) followed by addition of [PPh(4)]Cl and then PR(3) leads to two new dinuclear titanium(III) compounds, [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PR(3))(2)] (R = Et and R(3) = Me(2)Ph), both of which contain an anion with the face-sharing bioctahedral type structure. Their crystal structures are reported. [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PEt(3))(2)].2CH(2)Cl(2) crystallized in the triclinic space group P&onemacr;. Cell dimensions: a = 12.461(1) ?, b = 20.301(8) ?, c = 11.507(5) ?, alpha = 91.44 degrees, beta = 113.27(1) degrees, gamma = 104.27(2) degrees, and Z = 2. The distance between titanium atoms is 3.031(2) ?. [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PMe(2)Ph)(2)].CH(2)Cl(2) also crystallized in the triclinic space group P&onemacr; with cell dimensitions a = 11.635(4) ?, b = 19.544(3) ?, c = 11.480(3) ?, alpha = 100.69(2) degrees, beta = 109.70(1) degrees, gamma = 95.08(2) degrees, and Z = 2. The distance between titanium atoms in this compound is 2.942(1) ?. Variable temperature magnetic susceptibilities were measured for [PPh(4)][Ti(2)(&mgr;-Cl)(3)Cl(4)(PEt(3))(2)]. Electronic structure calculations were carried out for a model ion, [Ti(2)(&mgr;-Cl)(3)Cl(4)(PH(3))(2)](-), and another well-known anion, [Ti(2)(&mgr;-Cl)(3)Cl(6)](3)(-), by employing an ab initio configuration interaction method. The results of the calculations reveal that the metal-metal interaction in these Ti(III) face-sharing compounds can be best described by strong antiferromagnetic coulping that leads to a singlet ground state and a thermally accessible triplet first excited state. Accordingly the measured magnetic data were satisfactorily fitted to a spin-only formula.     

Substitution reactions of [Ru(dppe)(CO)(H(2)O)(3)][OTf](2)

The labile nature of the coordinated water ligands in the organometallic aqua complex [Ru(dppe)(CO)(H(2)O)(3)][OTf](2) (1) (dppe = Ph(2)PCH(2)CH(2)PPh(2); OTf = OSO(2)CF(3)) has been investigated through substitution reactions with a range of incoming ligands. Dissolution of 1 in acetonitrile or dimethyl sulfoxide results in the facile displacement of all three waters to give [Ru(dppe)(CO)(CH(3)CN)(3)][OTf](2) (2) and [Ru(dppe)(CO)(DMSO)(3)][OTf](2) (3), respectively. Similarly, 1 reacts with Me(3)CNC to afford [Ru(dppe)(CO)(CNCMe(3))(3)][OTf](2) (4). Addition of 1 equiv of 2,2'-bipyridyl (bpy) or 4,4'-dimethyl-2,2'-bipyridyl (Me(2)bpy) to acetone/water solutions of 1 initially yields [Ru(dppe)(CO)(H(2)O)(bpy)][OTf](2) (5a) and [Ru(dppe)(CO)(H(2)O)(Me(2)bpy)][OTf](2) (6a), in which the coordinated water lies trans to CO. Compounds 5a and 6a rapidly rearrange to isomeric species (5b, 6b) in which the ligated water is trans to dppe. Further reactivity has been demonstrated for 6b, which, upon dissolution in CDCl(3), loses water and coordinates a triflate anion to afford [Ru(dppe)(CO)(OTf)(Me(2)bpy)][OTf] (7). Reaction of 1 with CH(3)CH(2)CH(2)SH gives the dinuclear bridging thiolate complex [[(dppe)Ru(CO)](2)(mu-SCH(2)CH(2)CH(3))(3)][OTf] (8). The reaction of 1 with CO in acetone/water is slow and yields the cationic hydride complex [Ru(dppe)(CO)(3)H][OTf] (9) via a water gas shift reaction. Moreover, the same mechanism can also be used to account for the previously reported synthesis of 1 upon reaction of Ru(dppe)(CO)(2)(OTf)(2) with water (Organometallics 1999, 18, 4068).     

Chiral distortion in a Mn(IV)(salen)(N3)2 derived from Jacobsen's catalyst as a possible conformation model for its enantioselective reactions

The Mn (IV)(salen)(N 3) 2 complex ( 3) from Jacobsen's catalyst is synthesized, and the X-ray crystal structures of 3 as well as the starting Mn (III)(salen)(N 3)(CH 3OH) complex ( 2) are determined in order to investigate the conformation of the high-valent Mn (IV)(salen) molecule in comparison with that of Mn (III)(salen). The asymmetric unit of the crystal of 3 contains four complexes, all of which adopt a nonplanar stepped conformation effectively distorted by the chirality of the diimine bridge. The asymmetric unit of 2 also contains four complexes. Two of them show a stepped conformation of a lesser degree, but the other two adopt a bowl-shaped conformation. Comparison of the structural parameters shows that the Mn center in 3 is coordinated from both sides by two external axial N 3 ligands with significantly shorter bond lengths, which could induce greater preference for the stepped conformation in 3. The CH 3CN solution of 3 shows circular dichroism with a significantly strong band at 275 nm as compared to 2, suggesting that 3 may adopt a more chirally distorted conformation also in solution. The circular dichroism spectrum of 3 is slightly altered with isodichroic points from 298 to 253 K and shows no further change at temperatures lower than 253 K, suggesting that the solution of 3 contains an equilibrium between two conformers, where a low-energy conformer with more chiral distortion is predominantly favored even at room temperature. Complexes 2 and 3 are thoroughly characterized using various techniques including cyclic voltammetry, magnetic susceptibility, UV-vis, electron paramagnetic resonance, (1)H NMR, infrared spectroscopy, and electrospray ionization mass spectrometry.     

Synthesis of the five-coordinate ruthenium(II) complexes [(PCP)Ru(CO)(L)][BAr'4] [PCP = 2,6-(CH2P(t)Bu2)2C6H3, BAr'4 = 3,5-(CF3)2C6H3, L = eta1-ClCH2Cl, eta1-N2, or mu-Cl-Ru(PCP)(CO)]: reactions with phenyldiazomethane and phenylacetylene

Reaction of (PCP)Ru(CO)(Cl) (1) with NaBAr'4 yields the bimetallic product [[(PCP)Ru(CO)](2)(mu-Cl)][BAr'4] (2). The monomeric five-coordinate complexes [(PCP)Ru(CO)(eta1-ClCH2Cl)][BAr'4] (3) and [(PCP)Ru(CO)(eta1-N2)][BAr'4] (4) are synthesized upon reaction of (PCP)Ru(CO)(OTf) (6) with NaBAr'4 in CH2Cl2 or C6H5F, respectively. The solid-state structures of 2, 3, and 4 have been determined by X-ray diffraction studies of single crystals. The reaction of 3 with PhCHN2 or PhCCH affords carbon-carbon coupling products involving the aryl group of the PCP ligand in transformations that likely proceed via the formation of Ru carbene or vinylidene intermediates. Density functional theory and hybrid quantum mechanics/molecular mechanics calculations were performed to investigate the bonding of weak bases to the 14-electron fragment [(PCP)Ru(CO)]+ and the energetics of different isomers of the product carbene and vinylidene complexes.     

General synthesis of (salen)ruthenium(III) complexes via N...N coupling of (salen)ruthenium(VI) nitrides

Reaction of [Ru (VI)(N)(L (1))(MeOH)] (+) (L (1) = N, N'-bis(salicylidene)- o-cyclohexylenediamine dianion) with excess pyridine in CH 3CN produces [Ru (III)(L (1))(py) 2] (+) and N 2. The proposed mechanism involves initial equilibrium formation of [Ru (VI)(N)(L (1))(py)] (+), which undergoes rapid N...N coupling to produce [(py)(L (1))Ru (III) N N-Ru (III)(L (1))(py)] (2+); this is followed by pyridine substituion to give the final product. This ligand-induced N...N coupling of Ru (VI)N is utilized in the preparation of a series of new ruthenium(III) salen complexes, [Ru (III)(L)(X) 2] (+/-) (L = salen ligand; X = H 2O, 1-MeIm, py, Me 2SO, PhNH 2, ( t )BuNH 2, Cl (-) or CN (-)). The structures of [Ru (III)(L (1))(NH 2Ph) 2](PF 6) ( 6), K[Ru (III)(L (1))(CN) 2] ( 9), [Ru (III)(L (2))(NCCH 3) 2][Au (I)(CN) 2] ( 11) (L (2) = N, N'-bis(salicylidene)- o-phenylenediamine dianion) and [N ( n )Bu 4][Ru (III)(L (3))Cl 2] ( 12) (L (3) = N, N'-bis(salicylidene)ethylenediamine dianion) have been determined by X-ray crystallography.     

In situ formation of heterobimetallic salen complexes containing titanium and/or vanadium ions

A combination of high-resolution electrospray mass spectrometry and (1)H NMR spectroscopy has been used to prove that when a mixture of [(salen)TiO]2 complexes containing two different salen ligands (salen and salen') is formed, an equilibrium is established between the homodimers and the heterodimer [(salen)TiO2Ti(salen')]. Depending upon the structure and stereochemistry of the two salen ligands, the equilibrium may favor either the homodimers or the heterodimer. Extension of this process to mixtures of titanium(salen) complexes [(salen)TiO]2 and vanadium (V)(salen') complexes [(salen')VO] (+)Cl (-) allowed the in situ formation of the heterobimetallic complex [(salen)TiO2V(salen')] (+)X (-) to be confirmed for all combinations of salen ligands studied except when the salen ligand attached to titanium contained highly electron-withdrawing nitro-groups. The rate of equilibration between heterobimetallic complexes is faster than that between two titanium complexes as determined by line broadening in the (1)H NMR spectra. These structural results explain the strong rate-inhibiting effect of vanadium (V)(salen) complexes in asymmetric cyanohydrin synthesis catalyzed by [(salen)TiO]2 complexes. It has also been demonstrated for the first time that the titanium and vanadium complexes can undergo exchange of salen ligands and that this is catalyzed by protic solvents. However, the ligand exchange is relatively slow (occurring on a time scale of days at room temperature) and so does not complicate studies aimed at using heterobimetallic titanium and vanadium salen complexes as asymmetric catalysts. Attempts to obtain a crystal structure of a heterobimetallic salen complex led instead to the isolation of a trinuclear titanium(salen) complex, the formation of which is also consistent with the catalytic results obtained previously.     

Binuclear (salen)osmium phosphinidine and phosphiniminato complexes

The preparation of a number of binuclear (salen)osmium phosphinidine and phosphiniminato complexes using various strategies are described. Treatment of [Os(VI)(N)(L(1))(sol)](X) (sol = H(2)O or MeOH) with PPh(3) affords an osmium(IV) phosphinidine complex [Os(IV){N(H)PPh(3)}(L(1))(OMe)](X) (X = PF(6)1a, ClO(4)1b). If the reaction is carried out in CH(2)Cl(2) in the presence of excess pyrazine the osmium(III) phosphinidine species [Os(III){N(H)PPh(3)}(L(1))(pz)](PF(6)) 2 can be generated. On the other hand, if the reaction is carried out in CH(2)Cl(2) in the presence of a small amount of H(2)O, a μ-oxo osmium(IV) phosphinidine complex is obtained, [(L(1)){PPh(3)N(H)}Os(IV)-O-Os(IV){N(H)PPh(3)}(L(1))](PF(6))(2)3. Furthermore, if the reaction of [Os(VI)(N)(L(1))(OH(2))]PF(6) with PPh(3) is done in the presence of 2, the μ-pyrazine species, [(L(1)){PPh(3)N(H)}Os(III)-pz-Os(III){N(H)PPh(3)}(L(1))](PF(6))(2)4 can be isolated. Novel binuclear osmium(IV) complexes can be prepared by the use of a diphosphine ligand to attack two Os(VI)≡N. Reaction of [Os(VI)(N)(L(1))(OH(2))](PF(6)) with PPh(2)-C≡C-PPh(2) or PPh(2)-(CH(2))(3)-PPh(2) in MeOH affords the binuclear complexes [(MeO)(L(1))Os(IV){N(H)PPh(2)-R-PPh(2)N(H)}Os(IV)(L(1))(OMe)](PF(6))(2) (R = C≡C 5, (CH(2))(3)6). Reaction of [Os(VI)(N)(L(2))Cl] with PPh(2)FcPPh(2) generates a novel trimetallic complex, [Cl(L(2))Os(IV){NPPh(2)-Fc-PPh(2)N}Os(IV)(L(2))Cl] 7. The structures of 1b, 2, 3, 4, 5 and 7 have been determined by X-ray crystallography.     

Cyclohexene oxide/CO2 copolymerization catalyzed by chromium(III) salen complexes and N-methylimidazole: effects of varying salen ligand substituents and relative cocatalyst loading

A detailed mechanistic study into the copolymerization of CO2 and cyclohexene oxide utilizing CrIII(salen)X complexes and N-methylimidazole, where H2salen = N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-ethylenediimine and other salen derivatives and X = Cl or N3, has been conducted. By studying salen ligands with various groups on the diimine backbone, we have observed that bulky groups oriented perpendicular to the salen plane reduce the activity of the catalyst significantly, while such groups oriented parallel to the salen plane do not retard copolymer formation. This is not surprising in that the mechanism for asymmetric ring opening of epoxides was found to occur in a bimetallic fashion, whereas these perpendicularly oriented groups along with the tert-butyl groups on the phenolate rings produce considerable steric requirements for the two metal centers to communicate and thus initiate the copolymerization process. It was also observed that altering the substituents on the phenolate rings of the salen ligand had a 2-fold effect, controlling both catalyst solubility as well as electron density around the metal center, producing significant effects on the rate of copolymer formation. This and other data discussed herein have led us to propose a more detailed mechanistic delineation, wherein the rate of copolymerization is dictated by two separate equilibria. The first equilibrium involves the initial second-order epoxide ring opening and is inhibited by excess amounts of cocatalyst. The second equilibrium involves the propagation step and is enhanced by excess cocatalyst. This gives the [cocatalyst] both a positive and negative effect on the overall rate of copolymerization.     

A new family of mono- and dicarboxylic ruthenium complexes [Ru(DIP)2(L2)]2+ (DIP = 4,7-diphenyl-1,10-phenanthroline): synthesis, solution behavior, and X-ray molecular structure of trans-[Ru(DIP)2(MeOH)2][OTf]2

A new family of ruthenium complexes of general formula [Ru(DIP)2(L2)]2+, where DIP = 4,7-diphenyl-1,10-phenanthroline, a bidentate ligand with an extended aromatic system, was prepared and fully characterized. When L is a monodentate ligand, the following complexes were obtained: L = CF3SO3(-1) (2), CH3CN (3), and MeOH (4). When L2 is a bidentate ligand, the compounds [Ru(DIP)2(Hcmbpy)][Cl]2 (5) and [Ru(DIP)2(H2dcbpy)][Cl]2 (6) were prepared (Hcmbpy = 4-carboxy-4'-methyl-2,2-bipyridine, H2dcbpy = 4,4'-dicarboxy-2,2'-bipyridine). Complex [Ru(DIP)2(MeOH)2][OTf]2 (4) displayed a trans configuration of the DIP ligands, which is rare for octahedral complexes featuring DIP bidentate ligands. DFT calculations carried out on 4 showed that the cis isomer is more stable by 12.2 kcal/mol relative to the trans species. The solution behaviors of monocarboxylic complex [Ru(DIP)2(Hcmbpy)][Cl]2 (5) and dicarboxylic complex [Ru(DIP)2(H2dcbpy)][Cl]2 (6) were investigated by 1H NMR spectroscopy. VT-NMR, concentration dependence, and reaction with NaOD allowed us to suggest that aggregation of the cationic species in solution, especially for 6, originates mainly from hydrogen bonding interactions.     

Toward rational control of metal stoichiometry in heterobimetallic coordination complexes: synthesis and characterization of Pb(Hsal)2(Cu(salen*))2, [Pb(NO3)(Cu(salen*))2](NO3), Pb(OAc)2(Cu(salen*)), and [Pb(OAc)(Ni(salen*))2](OAc)

The ability of the transition metal complex M(salen)* (M = Ni, Cu) to form Lewis acid-base adducts with lead(II) salts has been explored. The new complexes Pb(Hsal)(2)(Cu(salen*))(2) (1), [Pb(NO(3))(Cu(salen*))(2)](NO(3)) (2), Pb(OAc)(2)(Cu(salen*)) (3), and [Pb(OAc)(Ni(salen*)(2)](OAc) (4) (Hsal = O(2)CC(6)H(4)-2-OH, salen* = bis(3-methoxy)salicylideneimine) have been synthesized and characterized spectroscopically and by single-crystal X-ray diffraction. The coordination environment of the lead in the heterobimetallic complex is sensitive both to the initial lead salt and to the transition metal salen* complex that is employed in the synthesis. As a result, we have been able to access both 2:1 and 1:1 adducts by varying either the lead salt or the transition metal in the heterobimetallic coordination complex. In all cases, the salen* complex is associated with the lead center via dative interactions of the phenolic oxygen atoms. The relationship between the coordination requirements of the lead and the chemical nature of the anion is examined. In compound 1, the Pb(2+) ion is chelated by two Cu(salen*) moieties, and both salicylate ligands remain attached to the lead center and bridge to the Cu(2+) ions. The two Cu(salen*) groups are roughly parallel and opposed to each other as required by crystallographic inversion symmetry at lead. In contrast, the two Cu(salen*) groups present in 2 and 4 attached to the lead ion show considerable overlap. Furthermore, only one nitrate ion in 2 and one acetate ion in 4 remain bonded to the lead center. Compound 3 is unique in that only one Cu(salen*) group can bind to lead. Here, both acetate ligands remain attached, although one is chelating bidentate and the other is monodentate.     

Complexities in the ring-opening polymerization of lactide by chiral salen aluminum initiators

The preparation of (R, R)- and (S, S)-salen Al(OR) complexes, where R = Et, CH2(i)Pr, CH2(t)Bu, and CH2CH(S)MeCl, are reported, along with their reactions with rac-lactide (salen = N, N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediamino). Rapid, reversible coordination of LA to the salen metal complex is observed, and it is shown that the relative rates of alcohol/alkoxide exchange are comparable to the NMR time scale while the rate of chain transfer involving (R, R)-salenAl(O-R-R) and (S, S)-salenAl(O-S-R) is much faster than the initial rate of ring opening of the LA monomer. For a primary [Al-OR] moiety, the ring opening of rac-LA is much faster than the ring-opening polymerization/enchainment of LA, and in the initial ring-opening event, the diastereoselectivity is dependent on the solvent, the chirality of the salen ligand, and the OR group. Irrespective of the initiator group OR or the solvent, the system moves to a pseudostatic equilibrium concentration of L- and D-LA which is dependent on the nature of the chirality of the salen ligand. Further studies show that the relative rate of trans-esterification is slower than the rate of LA enchainment and that the rate of epimerization is the slowest reaction in the system. Adventitious water leads to loss of catalytic activity and formation of the inert oxo-bridged compound [(salen)Al]2(mu-O) which has been structurally characterized.     

A cellulose-supported Mn(salen)Cl complex as an efficient heterogeneous catalyst for the selective oxidation of benzylic alcohols

[Mn(salen)Cl-cellulose] was synthesized by immobilization of homogeneous Mn(salen)Cl complex on cellulose and characterized by FT-IR, TGA and atomic absorption spectroscopy. The resulted catalyst exhibited moderate to high reactivity in the oxidation of benzylic alcohols into carbonyl compounds using oxone as oxidant in ambient conditions. The catalytic activity of Mn(salen)Cl and [Mn(salen)Cl-cellulose] in this reaction was investigated. The heterogeneous catalyst showed higher catalytic activity with respect to neat Mn(salen)Cl complex.     

Highly electrophilic (salen)ruthenium(VI) nitrido complexes

A series of cationic ruthenium(VI) nitrido species containing the cyclohexyl-bridged salen ligand (L) and its derivatives, [RuVI(N)(L)]+, have been prepared by treatment of [NBun4][RuVI(N)Cl4] with H2L in methanol. The structure of [RuVI(N)(L)](ClO4) (1a) has been determined by X-ray crystallography, d(RuN) = 1.592 A. In solvents such as DMF or DMSO, [RuVI(N)(L)]+ undergoes a facile N...N coupling reaction at room temperature to produce N2 and [RuIII(L)(S)2]+ (S = solvent). 1a reacts rapidly with secondary amines to produce diamagnetic RuIV-hydrazido(1-) species, [RuIV(N(H)NR2)(L)(HNR2)]+. The reaction with morpholine is first order in RuVI and second order in morpholine with k(CH3CN, 25 degrees C) = 2.08 x 106 M-2 s-1. This rate constant is over 4 orders of magnitude larger than that of the corresponding reaction of the electrophilic osmium nitride, trans-[OsVI(N)(tpy)(Cl)2]+, with morpholine. The structure of [Ru(NHNC4H8)(L)(NHC4H8)](PF6)2 has been determined by X-ray crystallography, the Ru-N(hydrazido) distance is 1.940 A, and the Ru-N-N angle is 129.4 degrees .     

Organomercury(II) and tellurium(II) compounds with the "pincer" ligand 2,6-[O(CH2CH2)2NCH2]2C6H3--stabilization of an unusual organotellurium(II) cationic species

The reaction of RH (1) with Hg(OAc)(2), in EtOH, gave the acetate RHgOAc (2) [R = 2,6-[O(CH(2)CH(2))(2)NCH(2)](2)C(6)H(3)]. The corresponding RHgCl (3) was obtained from 2 and LiCl. The reaction of 3 with TeCl(4) (1:1 molar ratio), in anhydrous 1,4-dioxane, resulted in the transfer of the organic ligand from mercury to tellurium and the isolation of the unexpected ionic compounds [RTe](2)[Hg(2)Cl(6)] (4) and [RH(3)][HgCl(4)] (5). The molecular structures of 1-4 and 5·H(2)O were established by single-crystal X-ray diffraction. The acetate 2 and the chloride 3 are monomeric in solid state. In both mercury and tellurium organometallic compounds the organic group acts as an (N,C,N) "pincer" ligand. This coordination pattern provided stability for the rare [RTe](+) cation. Weak cation-anion interactions [Te···Cl 3.869(3) ?] are present between [RTe](+) and the dinuclear anion [Hg(2)Cl(6)](2-) in the crystal of 4. Theoretical calculations with DFT methods were performed for models of 3 and 4. The results show that in the cation of 4 the coordination of the nitrogen atoms play an important role for the stabilization of the structure found in the crystal whereas in 3 the coordination of the nitrogen atoms to the metal centre stabilizes to a less extent the structure found in solid state.     

Cr(III)(salen)Cl catalyzed asymmetric epoxidations: insight into the catalytic cycle

Intermediates of chromium-salen catalyzed alkene epoxidations were studied in situ by EPR, (1)H and (2)H NMR, and UV-vis/NIR spectroscopy (where chromium-salens were (S,S)-(+)-N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediamino chromium(III) chloride (1) and racemic N,N'-bis(3,4,5,6-tetra-deuterosalicylidene)-1,2-cyclohexanediamino chromium(III) chloride (2)). High-valence chromium complexes, intermediates of epoxidation reactions, were detected and characterized by EPR and NMR. They are the reactive mononuclear oxochromium(V) intermediate (A) Cr(V)O(salen)L (where L = Cl(-) or a solvent molecule) and an inactive chromium-salen binuclear complex (B) which acts as a reservoir of the active species. The latter complex demonstrates an EPR signal characteristic of oxochromium(V)-salen species and (1)H NMR spectra typical for chromium(III)-salen complexes, and it is identified as mixed-valence binuclear L(1)(salen)Cr(III)OCr(V)(salen)L(2) (L(1), L(2) = Cl(-) or solvent molecules). The intermediates Cr(V)O(salen)L and L(1)(salen)Cr(III)OCr(V)(salen)L(2) exist in equilibrium, and their ratio can be affected by addition of donor ligands (DMSO, DMF, H(2)O, pyridine). Addition of donor additives increases the fraction of A over that of B. The same two complexes can be obtained with m-CPBA as oxidant. Reactivities of the Cr(V)O(salen)L complexes toward E-beta-methylstyrene were measured in DMF. The L(1)(salen)Cr(III)OCr(V)(salen)L(2) intermediate has been proposed to be a reservoir of the true reactive chromium(V) species. The chromium-salen catalysts demonstrate low turnover numbers (ca. 5), probably due to ligand degradation processes.     

Solid-state NMR spectroscopic study of coordination compounds of XeF(2) with metal cations and the crystal structure of [Ba(XeF(2))(5)][AsF(6)](2)

The coordination compounds [Mg(XeF(2))(2)][AsF(6)](2), [Mg(XeF(2))(4)][AsF(6)](2), [Ca(XeF(2))(2.5)][AsF(6)](2), [Ba(XeF(2))(3)][AsF(6)](2), and [Ba(XeF(2))(5)][AsF(60](2) were characterized by solid-state (19)F and (129)Xe magic-angle spinning NMR spectroscopy. The (19)F and (129)Xe NMR data of [Mg(XeF(2))(2)][AsF(6)](2), [Mg(XeF(2)(4)][AsF(6)](2), and [Ca(XeF(2))(2.5)][AsF(6)](2) were correlated with the previously determined crystal structures. The isotropic (19)F chemical shifts and (1)J((129)Xe-(19)F) coupling constants were used to distinguish the terminal and bridging coordination modes of XeF(2). Chemical-shift and coupling-constant calculations for [Mg(XeF(2))(4)][AsF(6)](2) confirmed the assignment of terminal and bridging chemical-shift and coupling-constant ranges. The NMR spectroscopic data of [Ba(XeF(2))(3)][AsF(6)](2) and [Ba(XeF(2))(5)][AsF(6)](2) indicate the absence of any terminal XeF(2) ligands, which was verified for [Ba(XeF(2))(5)][AsF(6)](2) by its X-ray crystal structure. The adduct [Ba(XeF(2))(5)][AsF(6)](2) crystallizes in the space group Fmmm, with a = 11.6604(14) Angstrom, b = 13.658(2) Angstrom, c = 13.7802(17) Angstrom, V = 2194.5(5) Angstrom(3) at -73 degrees C, Z = 4, and R = 0.0350 and contains two crystallographically independent bridging XeF(2) molecules and one nonligating XeF(2) molecule. The AsF(6-) anions in [Mg(XeF(2))(4)][AsF(6)](2), [Ca(XeF(2))(2.5)][AsF(6)](2), [Ba(XeF(2))(3)][AsF(6)](2), and [Ba(XeF(2))(5)][AsF(6)](2) were shown to be fluxional with the fluorines-on-arsenic being equivalent on the NMR time scale, emulating perfectly octahedral anion symmetry.     

Preparation and Thermal Decomposition of [Cr (salen) (H_2O)_2] Cl

Chromium(III)isanessentialtraceelement.Inanactiveform.chronlium(III)asacomponentofglucosetolerancefactor(GTF)canimproveinsulinbiologicalactivity.CrsupplementationinhumansandanimalsreducessymptomsofTypeIIdiabetesandhypoglycemia.Forabetterunderstandingofthenatureofbiologicallyactivechromium(ill)complex,manyGTFmodelcomplexeshavebeenstudiedpreviously'.Here,oneGTFmodelcomplexofN,N'-ethylenebis(salicylideneiminato)diaquochromium(ill)chloride,[Cr(salen)(H,O)=]CIwaspreparedandcharacterized.a…     

Structural diversity in gallium(III) complexes of the tripodal triarsine MeC(CH2AsMe2)3

The preparation and crystal structures of the first examples of gallium halide complexes with the tripodal arsine, MeC(CH(2)AsMe(2))3, reveal three distinctly different coordination modes for the ligand; the neutral [{micro(3)-MeC(CH(2)AsMe(2))3-kappaAs:kappaAs':kappaAs'}(GaI(3))3] with the triarsine coordinating to three GaI(3) units, [{Me(2)AsCH(2)C(Me)(CH(2)AsMe(2))2-kappa(2)AsAs'}GaCl(2)][GaCl(4)] involving bidentate chelation to a GaCl2+ cationic unit with the third As donor atom uncoordinated, and [{MeC(CH(2)AsMe(2))3-kappaAs:kappa(2)As'As'}(GaCl3)(GaCl2)][GaCl4] in which the triarsine forms a bidentate chelate to the GaCl2+ unit and the third As donor atom binds to a further GaCl3 unit.