Device physics of polymer light-emitting diodes

This article reviews a device model for the current and light generation of polymer light-emitting diodes (PLEDs). The model is based on experiments carried out on poly(dialkoxy-p-phenylene vinylene) (PPV) devices. The transport properties of holes in PPV have been investigated with indium tin oxide (ITO)/PPV/Au hole-only devices. The hole current is dominated by bulk conduction properties of the PPV, in contrast to previous reports. As the hole current is space-charge limited, the hole mobility as a function of electric field E and temperature T can be directly determined. The hole mobility exhibits a field dependence ln(μ) ∼ ✓E as also has been observed from time-of-flight experiments in many molecularly doped polymers and amorphous glasses. For the zero-field hole mobility an activation energy of 0.48 eV is obtained. The electron conduction in PPV has been studied by using Ca/PPV/Ca electron-only devices. It appears that the electron current is strongly reduced by the presence of traps with a total density of 10¹⁸ cm⁻³. Combining the results of electron- and hole-only devices a device model for PLEDs is proposed in which the light generation is due to bimolecular recombination between the injected electrons and holes. It is calculated that the unbalanced electron and hole transport gives rise to a bias-dependent efficiency. By comparison with experiment it is found that the recombination process in PPV is for 95% nonradiative. Furthermore, the experiments reveal that the bimolecular recombination process is thermally activated with an identical activation energy as measured for the charge carrier mobility. This demonstrates that the recombination process is of the Langevin-type, in which the rate-limiting step is the diffusion of electrons and holes towards each other. The occurrence of Langevin recombination explains why the conversion efficiency (photon/carrier) of a PLED is temperature independent. © 1998 John Wiley & Sons, Ltd.     

共轭聚合物材料及电致发光器件

共轭聚合物是一种极有应用前景的有机半导体材料,本文综述其研究进展,包括典型共轭聚合物材料PPV、PT、PF等及PPP的工作原理,发展前景和存在的问题。     

Structural, electronic, and optical properties of phosphole-containing pi-conjugated oligomers for light-emitting diodes

The purpose of this work is to provide an in-depth interpretation of the optical and electronic properties of a series of phosphole derivatives, including 2,5-diphenylthiooxophosphole (2a), 2-phenyl-5-biphenylthiooxophosphole (3a), 2-phenyl-5-stilbenylthiooxophosphole (4a), 2,5-dithienylthiooxophosphole (2b), 2-thienyl-5-biphenylthiooxophosphole (3b), 2-thienyl-5-stilbenylthiooxophosphole (4b), and dibenzophosphole 1. These thiooxophospholes show great potential for application in OLEDs as efficient red emitters due to the tuning of the optical and electronic properties by the use of various substituents at the 2,5-positions of the phosphole ring. The geometric and electronic structures of the oligomers in the ground state were investigated using density functional theory (DFT) and the ab initio HF, whereas the lowest singlet excited states were optimized with ab initio CIS. To assign the absorption and emission peaks observed in the experiment, we computed the energies of the lowest singlet excited states with time-dependent DFT (TD-DFT). All DFT calculations were performed using the B3LYP functional and the 6-31G (d) basis set. The results show that the HOMOs, LUMOs, energy gaps, ionization potentials, and electron affinities for the phosphole derivatives are significantly affected by varying the phosphole ring substituents at the 2,5-positions, which favor the hole and electron injection into OLEDs. The absorption and emission spectra exhibit red shifts to some extent [the absorption spectra: 339.63 (1)<358.65 (2a)<373.77 (3a)<443.89 nm (4a) and 403.03 (3b)<449.11 (2b)<460.19 nm (4b); the emission spectra: 418.42 (1)<513.62 (2a)<556.51 (3a)<642.59 nm (4a) and 568.31 (2b)<631.11 (3b)<647.35 nm (4b)] and the Stokes shifts are unexpectedly large ranging from 78 to 228 nm resulting from a more planar conformation of the excited state for the phosphole derivatives.     

Design and synthesis of polymers for light-emitting diodes

Polymers with aromatic ϕ-conjugated moieties were utilized as electroluminescent materials. In order to meet the requirements for light-emitting diodes (LED), the design and synthesis of electroluminescent polymers had to be developed and viewed in this review. Focus is on polymers with arylene vinylene, arylene ethinylene, phenylene, thiophene and arylene amine moieties as light-emitting, hole-transporting and electron-transporting materials in LED devices. An attempt has been made to arrange a structural classification of electroluminescent polymers in nonsegmented and segmented polymers. © 1998 John Wiley & Sons, Ltd.     

Electrochemical properties of self-assembled monolayers of tripod-shaped molecules and their applications to organic light-emitting diodes

Self-assembled monolayers of a tripod-shaped conjugated-thiol grafted onot Au(111) substrates are found to show electrochemically reversible oxidation and reduction and to improve electroluminescence performances of organic light-emitting diodes.     

Triphenylamine and quinoline-containing polyfluorene for blue light-emitting diodes

A novel blue light-emitting polyfluorene-based copolymer PTHD containing electron-rich triphenylamine and electron-poor phenylquinoline side chains in the C-9 position of fluorene unit is described. By comparison of the solution and thin film photoluminescence (PL) spectra of PTHD, a considerable red-shift of Δλ = 10-15 nm was observed in the thin film PL spectrum. The emission intensity of the shoulder peak appeared in dilute solution was also significantly enhanced in the thin film. In contrast to the reference polymer poly{[9,9-dihexylfluorene]-alt-[9,9-di(2,4-diphenylquinoline)fluorene]}, PTHD exhibits higher HOMO energy level, and higher maximum brightness with the PLED device configuration of ITO/PEDOT:PSS/polymer_70% + PBD_30%/TPBI/LiF/Al.     

Performance and defects in phosphorescent organic light-emitting diodes

Phosphorescent heavy metal complexes can utilize both singlet and triplet excitons and thus are interesting for doping polymer to obtain highly efficient organic light-emitting diodes. In this study, we have investigated devices using a new phosphorescent–metal complex containing fluorene and platinum added to a luminescent polymer blend, composed of 2-(4-biphenylyl)-5-(4-tert-butyl-phenyl)-(1,3,4-oxadiazole) (PBD) and poly(9-vinylcarbazole) (PVK). The performance of devices (luminance and yield) is measured in indium tin oxide (ITO)/poly(3-4 ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/(PVK–PBD-complex)/Al diodes. The devices emit an orange light with a brightness of 607 cd/m² and an external quantum efficiency of 0.28 cd/A at 25 V. In order to investigate the structural modifications of the polymer by the incorporation of phosphorescent–metal complex, we have studied the defect states in diodes by charge-based Deep Level Transient Spectroscopy (Q-DLTS). Analysis of Q-DLTS spectra obtained in undoped and doped devices, revealed at least three trap levels distributed in the range 0.2–0.5 eV within the band gap of the hybrid composite with trap density in the range around 10¹⁶ cm^?3. Incorporation of Pt complex into the polymer blend modified the trap states by reducing the density of traps in the blend and by creating new trap levels in the band gap.     

Mechanical properties and curing kinetics of epoxy resins cured by various amino-terminated polyethers

<正>A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A(DGEBA) and flexibleα,ω-bisamino(n-alkylene)phenyl terminated poly(ethylene glycol).The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers(ATPE) on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young's modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol~(-1),respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.     

Development and challenges of indium phosphide-based quantum-dot light-emitting diodes

Quantum dot light-emitting diodes (QLEDs) have developed rapidly in the last several decades, in which the maximum external quantum efficiency of the three primary color cadmium (Cd)-based QLEDs have exceeded the theoretical maximum value. However, the presence of Cd element has severely hampered their commercialization. Indium phosphide (InP)-based quantum dots (QDs) without heavy metals have continuously adjustable luminescence range from blue to near infrared, which is a competitive alternative for Cd-based QDs. Especially in the last few years, the synthesis techniques and the device structures of InP-based QLEDs have been greatly improved. In this review, we first introduce the properties of InP-based QDs, carrier dynamics and the early development history. Then, we focus on the development of InP-based red, green and blue primary color QLEDs from their first report in 2011 to the current state of the art. The effects of QDs structure (core/shell or gradient-alloyed QDs and organic ligand modified QDs) and device structure (charge transport layer and interfacial engineering) on the performance of InP-based QLEDs are also summarized.     

First examples of organophosphorus-containing materials for light-emitting diodes

Exploiting the reactivity of the P-atom of phosphole-based oligomers, we have achieved access to the first organophosphorus-containing organic light-emitting diode (OLED) materials. The versatility of these P-materials is demonstrated with the synthesis of a corresponding gold complex that has also been used as an OLED material. Optimization of the OLED devices by doping the phosphole layer with a red fluorescent dye is described.     

Thermal degradation kinetics of g-HA/PLA composite

Thermal degradation behaviors of a composite constituted by poly(l-lactide) (PLA) and hydroxyapatite nanoparticle that was surface-grafted with l-lactic acid oligomer (g-HA) in a nitrogen atmosphere were studied using thermogravimetric analysis (TGA) and compared with PLA. The kinetic models and parameters of the thermal degradation of PLA and the g-HA/PLA composite were evaluated by the invariant kinetic parameters (IKP) method and Flynn–Wall–Ozawa (FWO) method based on a set of TGA data obtained at different heating rates. It was shown that the conversion functions calculated by means of the IKP method depend on a set of kinetic models. The g-HA particle slowed down the thermal degradation of PLA polymer matrix.     

Conjugated polymer surfaces and interfaces in polymer-based light-emitting diodes

Since the discovery of high electrical conductivity in doped polyacetylene in 1977, π-conjugated polymers have emerged as viable semiconducting electronic materials for numerous applications. In the context of polymer electronic devices, it is of critical importance to understand the nature of the electronic structure of the polymer surface and the interface with metals. It has been shown that, for conjugated polymers, photoelectron spectroscopy, especially in connection with quantum chemical modeling, provides a maximum amount of both chemical and electronic structural information in one type of measurement. There is no such thing as the ideal metal-on-polymer contact; there is always some chemistry that occurs at the interface. © 1998 John Wiley & Sons, Ltd.     

Thermal properties in cured natural rubber/styrene butadiene rubber blends

Blends of natural rubber (NR) and styrene butadiene rubber (SBR) were prepared with sulfur and n-t-butyl-2-benzothiazole sulfonamide (TBBS) as accelerator, varying the amount of each polymer in the blend. Samples were analysed by rheometer curing at 433 K until their maximum torque was reached. The miscibility among the constituent polymers of the cured compounds was studied in a broad range of temperatures by means of differential scanning calorimetry, analyzing the glass transition temperatures of the samples. The specific heat capacity of the compounds was also determined. Thermal diffusivity of the samples was measured in the temperature range from 130 to 400 K with a new device that performs measurements in vacuum. The thermal results are explained on the basis of the structure formed during the vulcanization of the samples considering the variation of the crosslink density of each phase. Finally, a serial thermal conduction model that takes into account the contribution of each phase to the thermal diffusivity was used to fit the experimental results.     

New Alq3 derivatives with efficient photoluminescence and electroluminescence properties for organic light-emitting diodes

Two new ligands prepared under solvent free conditions and five aluminum complexes derived from 8-hydroxyquinoline have been synthesized and characterized. The majority of the new aluminum tris(8-hydroxyquinoline) derivatives have nitrogen functionalities at position-4 of the quinolate ligand. The photoluminescence emission wavelengths of the new Alq₃ derivatives are shifted according to the electronic properties of the substituents at position-4. Results from differential scanning calorimetry (DSC) investigations of the new Alq₃ derivatives indicate that the complexes 9 and 10 are non crystalline and have higher transition glass temperatures than the parent Alq₃. The EL measurements of OLED devices with complexes 7, 9, and 10 as emitters revealed that complexes 7, 9, and 10 are efficient emitters in organic light emitting diodes.     

Colloidal CdSe quantum dot electroluminescence: ligands and light-emitting diodes

We examine the effects of surface ligand exchange on the performance of hybrid organic/inorganic light emitting diodes (LEDs) that use colloidal nanocrystal quantum dots as emissive centers. Using a series of primary alkylamines with different alkane chain lengths, we exchange the native surface ligands on a series of CdSe/CdZnS/ZnS core/shell/shell nanocrystal quantum dots and compare the differences in photoluminescence and electroluminescence efficiency of the emissive quantum dot layer. We fabricate LEDs made with octadecylamine-, octylamine-, and butylamine-exchanged quantum dots. We find that the differences in electroluminescence efficiency of the devices are not always proportional to the photoluminescence quantum efficiency of the quantum dots. We discuss this trend both in terms of the competing needs of high photoluminescence efficiency and good charge injection and energy transfer, and also in terms of the different processability and film morphology arising from the use of nanoparticles passivated with shorter ligands. Correspondence: David S. Ginger, Department of Chemistry, University of Washington, Seattle, Washington 98195-1700, USA     

溶液加工型有机电致发光材料与器件研究进展

有机电致发光器件（OLEDs）在平板显示和固体照明领域有着广阔的应用前景,发展十分迅速,已实现了商业化．而可溶液加工的OLEDs采用喷墨打印、卷对卷印刷等低成本方式进行加工,在实现低成本、大面积显示及照明器件等方面具有巨大的应用潜力,引起了广泛关注．实现高效溶液加工型OLEDs的实用性需要在光电材料设计合成及器件制备方法上进一步深入研究．本文总结了发光材料与器件国家重点实验室可溶液加工型OLEDs材料及器件的研究进展．     

荧光/磷光混合型白光有机发光二极管的研究

白光有机发光二极管（white organic light-emitting diodes,WOLEDs）在全色显示、固态照明以及背光源等领域有巨大的应用前景,其研究备受关注.其中,荧光/磷光混合型WOLEDs因兼具荧光材料的长寿命和磷光材料的高效率,被认为是目前最有希望实现照明应用的器件结构.荧光/磷光混合型WOLEDs最重要的问题是要解决荧光材料的单线态激子和磷光材料的三线态激子的协同发光.为了避免单线态激子和三线态激子的相互猝灭问题,必须设计有效的器件结构.本文以两种不同三线态能级的蓝光荧光材料为研究对象,介绍了不同高性能荧光/磷光混合型WOLEDs的结构设计与性能.研究表明,载流子传输平衡的高效结构设计和激子分布宽范围内的有效调控是实现高性能荧光/磷光混合型WOLEDs的关键.     

A study of light-converting composites used in white light-emitting diodes

An experimental “wedge” method was suggested for obtaining ample information on the properties light-converting composites used in light-emitting diodes. The parameter determining the luminous emittance of the composite layer is the photoluminophore mass in it. It can be optimized experimentally using the suggested procedure. The composite based on Eu-doped Sialon luminophore upon excitation at a wavelength of 450 nm exhibits the optimal luminous emittance and emission color at a specific load of approximately 5 mg cm^?2. With variation of the excitation wavelength in the interval 430–470 nm, the observed trends in the luminous emittance of the Sialon composites are preserved in a wide interval of concentrations and thicknesses of the composite layer. The luminous emittance varies in the same direction as the wavelength.     

Low-picomolar limits of detection using high-power light-emitting diodes for fluorescence

Fluorescence detectors are ever more frequently being used with light-emitting diodes (LEDs) as the light source. Technological advances in the solid-state lighting industry have produced LEDs which are also suitable tools in analytical measurements. LEDs are now available which deliver 700 mW of radiometric power. While this greater light power can increase the fluorescence signal, it is not trivial to make proper use of this light. This new generation of LEDs has a large emitting area and a highly divergent beam. This presents a classic problem in optics where one must choose between either a small focused light spot, or high light collection efficiency. We have selected for light collection efficiency, which yields a light spot somewhat larger than the emitting area of the LED. This light is focused onto a flow cell. Increasing the detector cell internal diameter (i.d.) produces gains in (sensitivity)3. However, since the detector cell i.d. is smaller than the LED spot size, scattering of excitation light towards the detector remains a significant source of background signal. This can be minimized through the use of spectral filters and spatial filters in the form of pinholes. The detector produced a limit of detection (LOD) of 3 pM, which is roughly three orders of magnitude lower than other reports of LED-based fluorescence detectors. Furthermore, this LOD comes within a factor of six of much more expensive laser-based fluorescence systems. This detector has been used to monitor a separation from a gel filtration column of fluorescently labeled BSA from residual labeling reagent. The LOD of fluorescently labeled BSA is 25 pM.     

Solution-processed multi-resonance organic light-emitting diodes with high efficiency and narrowband emission

With excellent color purity(full-width half maximum(FWHM) 40 nm) and high quantum yield,multiresonance(MR) molecules can harvest both singlet and triplet excitons for highly efficient narrowband organic light-emitting diodes(OLEDs) owing to their thermally activated delayed fluorescence(TADF)nature.However,the highly rigid molecular skeleton with the oppositely positioned bo ron and nitrogen in generating MR effects results in the intrinsic difficulties in the solution-processing of MR-OLEDs.Here,we demonstrate a facile strategy to increase the solubility,enhance the efficiencies and modulate emission color of MR-TADF molecules by extending aromatic rings and introducing tert-butyls into the MR backbone.Two MR-TADF emitters with smaller singlet-triplet splitting energies(ΔE~(ST))and larger oscillator strengths were prepared conveniently,and the solution-processed MR-OLEDs were fabricated for the first time,exhibiting efficient bluish-green electroluminescence with narrow FWHM of 32 nm and external quantum efficiency of 16.3%,which are even comparable to the state-of-the-art performances of the vacuum-evaporated devices.These results prove the feasibility of designing efficient solutionprocessible MR molecules,offering important clues in developing high-performance solution-processed MR-OLEDs with high efficiency and color purity.