Electrochemical behavior of copper in 1-butyl-3-methylimidazolium bromide-copper(II) bromide binary ionic liquid

The methods of potentiometry, voltammetry, and gravimetry are used to study the electrochemical behavior of copper in the BMImBr-CuBr₂ ionic liquid (0?C30.5 mol % CuBr₂). It is shown that electrochemical reduction of copper(II) occurs irreversibly, in two one-electron stages (transfer coefficient ?? of the cathodic process are 0.58 and 0.46, accordingly, for the first and second stages). Diffusion coefficients of copper-containing ions D _Cu(II) at 60°C are 1.3 × 10^?7 and 1.6 × 10^?7 cm² s^?1 in melts with the CuBr₂ concentration of 0.1 and 1.5 mol kg^?1 of BMImBr, accordingly. High (up to 98%) deposition efficiency and high-quality copper deposit can be obtained in the potential range of ?2.0 to ?1.8 V (vs. a platinum quasireference electrode). It is found that the copper corrosion rate grows at an increase in the CuBr₂ concentration in the binary melt and is comparable with that in aqueous solutions of H₂SO₄-CuSO₄.     

Electrodeposition of Ni-Mg alloys from 1-butyl-3-methylimidazolium chloride/glycerin eutectic-based ionic liquid

Journal of Solid State Electrochemistry - The electrodeposition of Ni-Mg alloys in 1-butyl-3-methylimidazolium chloride/glycerin (BMIC/GL, 1:1 M ratio) eutectic-based ionic liquid...     

Lipase-catalysed polyester synthesis in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid

1-Butyl-3-methylimidazolium hexafluorophosphate ionic liquid was employed as a reaction medium for lipase-catalysed aliphatic polyester synthesis. Lipase PS-C exhibited excellent catalysis in polycondensation of diethyl octane-1,8-dicarboxylate and 1,4-butanediol at room temperature and at 60°C. A relatively high molecular weight polymer was obtained at 60°C.     

Anodic oxidation of silver in 1-butyl-3-methylimidazolium bromide ionic liquid

Electrochemical oxidation of silver in the 1-butyl-3-methylimidazolium bromide ([BMIm]Br) ionic liquid is studied by cyclic voltammetry, chronopotentiometry, chronoammetry, and gravimetry. Two electrode processes irreversibly proceed on the silver electrode in the potential range studied: the formation of compound [BMIm]⁺[AgBr₂]^?, which is soluble in [BMIm]Br, and difficultly soluble AgBr.     

Direct electroreduction of solid cuprous chloride to copper powder in 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid

Direct electroreduction of solid cuprous chloride to prepare copper powder in a “neutral” ambient-temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid (BMIMBF₄) was investigated. Cyclic voltammetry of the CuCl powder in a Pt-powder cavity microelectrode exhibited that solid CuCl can be electrochemical reduced in the ionic liquid. Chronoamperometry of the salt powder filled Mo-cavity electrode (current collector) in the ionic liquid further demonstrated the conversion of chloride-to metal inside the cavity, as confirmed by scanning electron microscopy, energy-dispersive X-ray, and X-ray diffraction spectra.     

The influence of water on the physicochemical characteristics of 1-butyl-3-methylimidazolium bromide ionic liquid

A modified synthesis of 1-butyl-3-methylimidazolium bromide (BMImBr) was suggested and performed, and some physicochemical properties of the product containing 0.64–13.6 wt % water were determined. Water increased the electrical conductivity and decreased the viscosity and melting point of the substance but weakly influenced its density. Water in amounts of 5–8 wt % (45–50 mol %) caused structural changes. The BMImBr · 0.5H₂O crystal hydrate was found to be stable thermodynamically.     

Use of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate in countercurrent chromatography

Room temperature ionic liquids (RTIL) are molten salts that are liquids at room temperature. Their liquid state makes them possible candidates as solvents in countercurrent chromatography (CCC), which uses solvents as both the mobile and stationary phases. The study focuses on 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆), an easy to synthesize and purify RTIL whose melting point is –8°C. It is shown that BMIM PF₆ behaves like a solvent of significant polarity (comparable with that of ethanol). The ternary phase diagram water–acetonitrile–BMIM PF₆ is given, because it was necessary to add acetonitrile to reduce the ionic liquid viscosity. The 40:20:40% w/w water–acetonitrile–BMIM PF₆ biphasic liquid system was found to be appropriate as a biphasic liquid system for CCC. Different aromatic solutes, including bases, acids, and neutral compounds, were injected into the CCC column to estimate their distribution constants between the ionic liquid-rich phase and the aqueous phase. The resulting K_il/w constants were compared with the corresponding literature octanol–water partition coefficients, K_o/w. The important drawbacks in the use of RTIL in CCC are clearly pointed out: high viscosity producing pressure build-up, UV absorbance limiting the use of the convenient UV detector, and non-volatility precluding the use of the evaporative light-scattering detector for continuous detection.     

Aggregation behavior of a fluorinated surfactant in 1-butyl-3-methylimidazolium ionic liquids

The aggregation behavior of a fluorinated surfactant (FC-4) was studied by surface tension measurements in 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF 4]) and hexafluorophosphate ([bmim][PF 6]) at various temperatures. A series of surface properties, including adsorption efficiency (p C 20), effectiveness of surface tension reduction (Pi CAC), maximum surface excess concentration (Gamma max) and minimum surface area/molecule (A(min)) at the air-water interface were estimated. By comparing the fluorinated surfactant with traditional surfactants, we deduced that the surface activity of the fluorinated surfactant in ILs was superior to the activity of other surfactants. From the CAC values and their temperature dependence, we estimated the thermodynamic parameters of aggregate formation. The thermodynamic parameters indicate that the aggregate of FC-4 in [bmim][BF 4] is a traditional micelle, while the aggregate of FC-4 in [bmim][PF 6] is nanodroplets composed of FC-4 molecules segregated from the solution phase. These results were further confirmed by (1)H NMR measurements.     

Luminescence properties and water coordination of Eu3+ in the binary solvent mixture water/1-butyl-3-methylimidazolium chloride

The effect of relative water content on the luminescence properties and speciation of Eu3+ ions in solutions of EuCl3 in the binary solvent mixture water/[BMI]Cl is presented, where [BMI]Cl is the ionic liquid (IL) 1-butyl-3-methylimidazolium chloride. Using luminescence techniques, the binding properties of water to Eu3+ are determined for samples with mole ratios of water-to-IL ranging from 0 to 5. Very little water binds to Eu3+ at mole ratios of water-to-IL less than 1, above which binding increases rapidly with increasing water concentration. It is shown that only certain hydration numbers for Eu3+ complexes are stable in the water/IL solutions. The data presented suggest that the Eu3+ species present are [EuClx]3-x, [EuCly(H2O)3-4]3-y, [EuClz(H2O)6]3-z, and [Eu(H2O)8-9]3+ (where x > y > z). Comparison of the positions of the 5D0<--7F0 transitions of the Eu3+ complexes in IL solution with those of model crystal systems provides insight into the extent of Cl- complexation. This study suggests that [BMI]Cl is a promising medium for luminescent lanthanide (Ln) compounds due to the low-energy phonon environment of the [LnClx]3-x complex and to the fact that moderate water contamination does not result in direct binding of water to Ln3+, which would result in luminescence quenching.     

Electrochemical properties of 1-butyl-3-methylimidazolium bromide melt containing water impurities

The effect of a water impurity (1.8–10 wt %) on the conductivity of the ionic liquid-H₂O binary system was studied in a wide temperature range. It was shown that the interaction between components is characteristic of this system, and the molar ratio of components 1: 1 is boundary between the structures of solution and melt. The basic kinetic features of electrochemical reduction of water of the BMImBr-H₂O binary system were determined by voltammetry with linear potential sweep. The transfer coefficient for the cathodic process (α = 0.46) and H₂O molecule diffusivities were determined depending on the water content ( $ D_{H_2 O} The effect of a water impurity (1.8–10 wt %) on the conductivity of the ionic liquid-H₂O binary system was studied in a wide temperature range. It was shown that the interaction between components is characteristic of this system, and the molar ratio of components 1: 1 is boundary between the structures of solution and melt. The basic kinetic features of electrochemical reduction of water of the BMImBr-H₂O binary system were determined by voltammetry with linear potential sweep. The transfer coefficient for the cathodic process (α = 0.46) and H₂O molecule diffusivities were determined depending on the water content ( = (0.2–1.3) × 10⁻¹⁰ cm²s⁻¹). Original Russian Text ? E.P. Grishina, A.M. Pimenova, L.M. Ramenskaya, O.V. Kraeva, 2008, published in Elektrokhimiya, 2008, Vol. 44, No. 11, pp. 1352–1358.     

甲基丁基咪唑四羰基钴离子液体的改进合成与表征

对新型甲基丁基咪唑四羰基钴离子液体的合成方法进行了有效的改进, 克服了文献方法中的某些不足, 并因而能够首次稳定地以更高的纯度获得该种离子液体.对其进行了全面的谱学表征证明了产物的结构和纯度.     

Partial molar volumes of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate in n-donor solvents

The values of partial molar volume (PMV) of ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate were determined in twelve n-donor solvents and compared with the known values of PMVs of lithium and magnesium perchlorates in the same solvents. The proportionality in the change in the molar volumes of these salts and the predominant contribution of anion solvation were observed. The values of PMVs of the 1-butyl-3-methylimidazolium cation were calculated.     

Supported phospholipid membrane interactions with 1-butyl-3-methylimidazolium chloride

Quartz crystal microbalance with dissipation measurements were conducted for a 98/2 mole ratio of 1,2-dielaidoylphosphocholine (DEPC) and 1,2-dimyristoylphosphoglycerol (DMPG) on silica, gold, and a self-assembled monolayer of 11-mercapto-1-undecanol (11MU) and 11-mercaptoundecanoic acid (11MUA) at 50 mol % each. This study demonstrates that vesicles composed of DEPC and DMPG at 98 and 2 mol %, respectively, formed a supported bilayer with unruptured vesicles present when adsorbed onto the self-assembled monolayer. Also, the partially formed supported bilayer apparently deadsorbed in the presence of 1-butyl-3-methylimidazolium chloride, suggesting that surface-bilayer interactions are weaker on a hydrophilic modified gold surface composed of 50/50 11MU/11MUA than the surface-bilayer interactions on silica.     

Electrical conductivity and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid

Broadband dielectric and terahertz spectroscopy (10(-2)-10(+12) Hz) are combined with pulsed field gradient nuclear magnetic resonance (PFG-NMR) to explore charge transport and translational diffusion in the 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid. The dielectric spectra are interpreted as superposition of high-frequency relaxation processes associated with dipolar librations and a conductivity contribution. The latter originates from hopping of charge carriers on a random spatially varying potential landscape and quantitatively fits the observed frequency and temperature dependence of the spectra. A further analysis delivers the hopping rate and enables one to deduce--using the Einstein-Smoluchowski equation--the translational diffusion coefficient of the charge carriers in quantitative agreement with PFG-NMR measurements. By that, the mobility is determined and separated from the charge carrier density; for the former, a Vogel-Fulcher-Tammann and for the latter, an Arrhenius temperature dependence is obtained. There is no indication of a mode arising from the reorientation of stable ion pairs.     

Aggregation behavior of pluronic triblock copolymer in 1-butyl-3-methylimidazolium type ionic liquids

Three amphiphilic poly(oxyethylene)-poly(oxypropylene)-poly(oxyethylene) ethers triblock copolymers, denoted Pluronic L61 (PEO3PPO30PEO3), Pluronic L64 (PEO13PPO30PEO13), and Pluronic F68 (PEO79PPO30PEO79) were shown to aggregate and form micelles in ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). The surface tension measurements revealed that the dissolution of the copolymers in ILs depressed the surface tension in a manner analogous to aqueous solutions. The cmcs of three triblock copolymers increase following the order of L61, L64, F68, suggesting that micellar formation was driven by solvatophobic effect. cmc and gamma cmc decrease with increasing temperature because hydrogen bonds between ILs and hydrophilic group of copolymers decrease and accordingly enhance the solvatophobic interaction. Micellar droplets of irregular shape with average size of 50 nm were observed. The thermodynamic parameters DeltaGm0, DeltaHm0, DeltaSm0 of the micellization of block copolymers in bmimBF4 and bmimPF6 were also calculated. It was revealed that the micellization is a process of entropy driving, which was further confirmed by isothermal titration calorimetry (ITC) measurements.     

Hydroesterification of ethylene oxide catalyzed by 1-butyl-3-methylimidazolium cobalt tetracarbonyl ionic liquid

In this paper, functional ionic liquid 1-butyl-3-methylimidazolium cobalt tetracarbonyl [Bmim][Co(CO)₄] is prepared in a metathesis reaction between [Bmim]Cl and KCo(CO)₄. The structure of [Bmim]⁺ is illustrated by ¹H NMR, while [Co(CO)₄]⁻ is confirmed by IR(ν_CO) spectrum. Methyl 3-hydroxypropionate(3-HPM), an intermediate to 1,3-propanediol (1,3-PDO), can be prepared in high yield by hydroesterification of ethylene oxide in the presence of a [Bmim][Co(CO)₄] catalyst. Under a pressure of 3.7 MPa and at a temperature of 75 °C, the yield of 3-HPM can reach 90.8% in 10 h. Even after the catalyst is recycled three times, a yield of more than 80% can be obtained. A possible reaction mechanism has also been proposed.     

Entropy of cellulose dissolution in water and in the ionic liquid 1-butyl-3-methylimidazolim chloride

The entropic driving forces of cellulose dissolution in water and in the ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) are investigated via molecular dynamics simulations and the two-phase thermodynamic model. An atomistic model of cellulose was simulated at a dissociated state and a microfibril state to represent dissolution. The calculated values of entropy and internal energy changes between the two states inform the interplay of energetic and entropic driving forces in cellulose dissolution. In both water and BmimCl, we found that the entropy associated with the solvent degrees of freedom (DOF) decreases upon cellulose dissolution. However, solvent entropy reduction in BmimCl is much smaller than that in water and counteracts the entropy gain from the solute DOF to a much lesser extent. Solvent entropy reduction in water also plays a major role in making the free energy change of cellulose dissolution unfavorable at room temperature. In BmimCl, the interaction energies between solvent molecules and glucan chains and the total entropy change both contribute favorably to the dissolution free energy of cellulose. Calculations at different temperatures in the two solvents indicate that changes in total internal energy are a good indicator of the sign of the free energy change of cellulose dissolution.     

Homogeneous tritylation of cellulose in 1-butyl-3-methylimidazolium chloride

1-Alkyl-3-methylimidazolium-based ionic liquids, having chloride as a counter ion, were studied for cellulose solubility; and the influence of different alkyl chain lengths was also investigated. The alkyl chain length was incrementally varied from ethyl to decyl to determine structure-dissolution properties; a distinct odd-even effect was observed for short chain lengths. In addition, the tritylation of cellulose was performed in 1-butyl-3-methylimidazolium chloride using pyridine as base. The influences of reaction time and the ratio of trityl chloride per cellulose monomer unit on the degree of substitution were investigated in detail by elemental analysis and 1H NMR spectroscopy. A DS of around 1 was obtained after 3 h reaction time using a six fold excess of trityl chloride.