微波法合成离子液体1-乙基-3-甲基咪唑四氟硼酸盐的研究

离子液体(ionic liquids)是在室温下液态的一种熔融盐,又称为室温离子液体,一般由有机阳离子和无机阴离子或者有机阴离子构成,可以通过调节阴阳离子的种类来改变离子液体的性能,因此敢称为一种"可以设计的溶剂".     

Thermophysical properties of 1-methyl-3-methylimidazolium dimethylphosphate and 1-ethyl-3-methylimidazolium diethylphosphate

The density and surface tension of 1-methyl-3-methylimidazolium dimethylphosphate, [C₁mim](CH₃O)₂PO₂ and 1-ethyl-3-methylimidazolium diethylphosphate, [C₂mim](CH₃CH₂O)₂PO₂ ionic liquids have been measured over the temperature range from (283.15 to 338.15) K. The coefficients of thermal expansion were calculated from the experimental density results using an empirical correlation for T = (283.15 to 338.15) K. Molecular volume and standard entropies of these ILs were calculated from the experimental density values. The surface properties of ILs were investigated. The critical temperature and enthalpy of vapourization were also discussed.     

Thermophysical properties of pure 1-ethyl-3-methylimidazolium methylsulphate and its binary mixtures with alcohols

The density and surface tension of 1-ethyl-3-methylimidazolium methylsulphate, [EMIM][CH₃SO₄] ionic liquid have been measured from (283.15 to 333.15) K. The coefficient of thermal expansion was calculated from the experimental density results using an empirical correlation for T = (283.15-338.15) K. Molecular volume and standard entropies of [EMIM][CH₃SO₄] ionic liquid were obtained from the experimental density values. The surface properties, critical temperature and enthalpy of vaporization were also discussed. Density and surface tension have been measured over the whole composition range for [EMIM][CH₃SO₄] with alcohols (methanol, ethanol, 1-butanol) binary systems at 298.15 K and atmospheric pressure. Excess molar volumes and surface tension deviations for the binary systems have been calculated and were fitted to a Redlich-Kister equation to determine the fitting parameters and the root mean square deviations.     

A new force field model of 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and acetonitrile mixtures

Recently, we introduced a new force field (FF) to simulate transport properties of imidazolium-based room-temperature ionic liquids (RTILs) using a solid physical background. In the present work, we apply this FF to derive thermodynamic, structure, and transport properties of the mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF(4)], and acetonitrile (ACN) over the whole composition range. Three approaches to derive a force field are formulated based on different treatments of the ion-ion and ion-molecule Coulomb interactions: unit-charge, scaled-charge and floating-charge approaches. The simulation results are justified with the help of experimental data on specific density and shear viscosity for these mixtures. We find that a phenomenological account (particularly, a simple scaled-charge model) of electronic polarization leads to the best-performing model. Remarkably, its validity does not depend on the molar fraction of [BMIM][BF(4)] in the mixture. The derived FF is so far the first molecular model which is able to simulate all transport properties of the mixtures, comprising RTIL and ACN, fully realistically.     

Liquid structures of 1-butyl-3-methylimidazolium tetrafluoroborate and carbon dioxide mixtures by X-ray diffraction measurements

X-ray diffraction measurements for the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF₄], mixed with CO₂ were carried out at high pressures using our developed polymer cell. The intermolecular distribution functions obtained for [BMIM][BF₄]–CO₂ mixtures showed that CO₂ molecules are preferentially solvated to the [BF₄]⁻ anion. The similar preferential solvation was previously observed in analogous 1-btuyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF₆], with a different anion, which is in harmony with the present results in [BMIM][BF₄]–CO₂.     

Microscopic structures of ionic liquids 1-ethyl-3-methylimidazolium tetrafluoroborate in water probed by the relative chemical shift

The relative chemical shifts (Δδ) were put forward to investigate the microscopic structure of 1-ethyl-3-methyl-imidazolium tetrafluoroborate (EmimBF₄) during the dilution process with water. The concentration-dependent Δδ _{(C2)H–(C4)H}, Δδ _{(C2)H–(C5)H} and Δδ _{(C4)H–(C5)H} were analyzed. The results reveal that the variations of the microscopic structures of three aromatic protons are inconsistent. The strength of the H-bond between water and three aromatic protons follows the order: (C2)H…O > (C4)H…O > (C5)H…O. The concentration-dependent Δδ _{(C6)H–(C7)H} and Δδ _{(C6)H–(C8)H} indicate the formation of the H-bonds of (C_alkyl)H…O is impossible, and more water is located around (C6)H than around (C7)H or (C8)H. The concentration-dependent Δδ _{(C2)H–(C4)H} and Δδ _{(C2)H–(C5)H} both increase rapidly when x _water > 0.9 or so, suggesting the ionic pairs of EmimBF₄ are dissociated rapidly. The turning points of concentration-dependent Δδ _{(C2)H–(C4)H} and Δδ _{(C2)H–(C5)H} indicate that some physical properties of the EmimBF₄/water mixtures also change at the corresponding concentration point. The microscopic structures of EmimBF₄ in water could be clearly detected by the relative chemical shifts.     

Structural change of 1-butyl-3-methylimidazolium tetrafluoroborate + water mixtures studied by infrared vibrational spectroscopy

Mixtures of ionic liquid (IL, 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF4]) and water with varying concentrations were studied by attenuated total reflection infrared absorption and Raman spectroscopy. Changes in the peak intensities and peak positions of CHx (x = 1, 2, 3) vibration modes of the cation of the IL and OH vibration modes of the water molecules were investigated. Peaks from normal-mode stretch vibrations of CH bonds belonging to the imidazolium ring of the cation did not change their positions, while those from the terminal methyl group of the butyl chain blueshifted by approximately 10 cm-1 with the addition of water. On the other hand, change in the spectral shape in the OH stretch vibration region shows hydrogen-bonding network of water molecules breaking down rapidly as the IL is added. Trends in the change of the peak positions and the peak intensities suggested qualitative change of the intermolecular structure in the [BMIM][BF4] + H2O mixture at 32 +/- 2 and 45 +/- 2 mol/L of water concentration.     

Viscosities and refractive indices of binary mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate and 1-butyl-2,3-dimethylimidazolium tetrafluoroborate with water at 298 K

Viscosities and refractive indices have been determined for (water + 1-butyl-3-methylimidazolium tetrafluoroborate) and (water + 1-butyl-2,3-dimethylimidazolium tetrafluoroborate) mixtures at 298.15 K, over the whole composition range. The refractive indices were compared with the predictions of the Lorentz–Lorenz, Wiener, and Gladstone–Dale equations. Viscosity deviations (Δη) and refractive index deviations (Δn_D) have been calculated and fitted to the Redlich–Kister polynomial equations. Δn_D are positive whereas Δη are negative over the entire mixture composition for the two salts. The influence of the structure of imidazolium cation on the above physicochemical properties was discussed.     

Carbon dioxide solubility in 1-ethyl-3-methylimidazolium trifluoromethanesulfonate

In this work, we present new solubility results for carbon dioxide in the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethanesulfonate for temperatures ranging from (303.2 to 343.2) K and pressures up to 5.9 MPa using a thermogravimetric microbalance. Carbon dioxide solubilities were determined from absorption saturation (equilibrium) results at each fixed temperature and pressure. The buoyancy effect was accounted for in the evaluation of the carbon dioxide solubility. A highly accurate equation of state and a group contribution predictive method for carbon dioxide and for ionic liquids, respectively, were employed to determine the effect of buoyancy on carbon dioxide solubility. The solubility measurements are presented as a function of temperature and pressure. An extended Henry’s law equation was used to correlate the present experimental solubility values and the result was satisfactory.     

Thermodynamic properties of 1-butyl-3-methylpyridinium tetrafluoroborate

Pressure, density, temperature (p, ρ, T) data of 1-butyl-3-methylpyridinium tetrafluoroborate [C4mpyr][BF₄] at T = (283.15 to 393.15) K and pressures up to p = 100 MPa are reported with an estimated experimental relative combined standard uncertainty of Δρ/ρ = ±(0.01 to 0.08)% in density. The measurements were carried out with a newly constructed Anton-Paar DMA HPM vibration-tube densimeter. The system was calibrated using double-distilled water, methanol, toluene and aqueous NaCl solutions. An empirical equation of state for fitting of the (p, ρ, T) data of [C4mpyr][BF₄] has been developed as a function of pressure and temperature to calculate the thermal properties of the ionic liquid (IL), such as isothermal compressibility, isobaric thermal expansibility, differences in isobaric and isochoric heat capacities, thermal pressure coefficient and internal pressure. Internal pressure and the temperature coefficient of internal pressure data were used to make conclusions on the molecular characteristics of the IL.     

Physical and electrochemical properties of 1-alkyl-3-methylimidazolium tetrafluoroborate for electrolyte

Three kinds of ionic liquids, 1-alkyl-3-methylimidazolium tetrafluoroborate (n=2–4), were prepared and fundamental properties of ionic liquids and those mixed with industrially used organic solvents (PC, GBL and AN) were investigated compared to solid salts, TEMABF₄. It was found that degree of ionization of the ionic liquids were almost same as that of TEMABF₄ from the conductivity measurement in diluted system of PC. The ionic liquids and the organic solvents intermingle with each other. Some enhancement in conductivity was observed compared to TEMABF₄.     

Density and surface tension of pure 1-ethyl-3-methylimidazolium l-lactate ionic liquid and its binary mixtures with water

The density and surface tension of 1-ethyl-3-methylimidazolium l-lactate ([emim][l-lactate]) ionic liquid were determined from T = (283.15 to 333.15) K. The coefficients of thermal expansion were calculated from the experimental density results using an empirical correlation for T = (283.15 to 333.15) K. Molecular volume and standard entropies of the IL were calculated from the experimental density values. The surface properties of IL were investigated. The critical temperature and enthalpy of vaporization were also discussed. Density and surface tension have been measured over the whole composition range for {[emim][l-lactate] + water} binary systems at a temperature of 298.15 K and atmospheric pressure. Excess molar volumes V^E and the surface tension deviations δγ have been determined.     

Solvatochromic parameters for binary mixtures of 1-(1-butyl)-3-methylimidazolium tetrafluoroborate with some protic molecular solvents

The solvatochromic parameters (ET(N), normalized polarity parameter; pi*, dipolarity/polarizability; beta, hydrogen-bond acceptor basicity; alpha, hydrogen-bond donor acidity) were determined for binary solvent mixtures of 1-(1-butyl)-3-methylimidazolium tetrafluoroborate ([bmim]BF4) with water, methanol, and ethanol at 25 degrees C over the whole range of mole fractions. In nonaqueous solutions, the value of the mixture increases with mole the fraction of [bmim]BF4 and then decreases gradually to the value of pure [bmim]BF4. Positive deviation from ideal behavior was observed for the solvent parameters ET(N), pi*, and alpha, whereas the deviation of the beta parameter is negative. The applicability of the combined nearly ideal binary solvent/Redlich-Kister equation for the correlation of various solvatochromic parameters with solvent composition was proved too for the first time. This equation provides a simple computational model to correlate and/or predict various solvatochromic parameters for many binary solvent systems. The correlation between the calculated and the experimental values of various parameters was in accordance with this model. Solute-solvent and solvent-solvent interactions have been applied for interpretation of the results.     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

Isotope effects on miscibility of 1-butyl-3-methylimidazolium tetrafluoroborate with butanols

The liquid-liquid miscibility temperatures as a function of composition and deuterium substitution have been experimentally determined for the binary mixtures of 1-butyl-3-methylimidazolium tetrafluroborate with 1-butanol, isobutyl alcohol, 2-butanol, and tert-butyl alcohol and their deuterated forms (OH/OD substitution). All systems exhibit upper critical solution temperatures (UCSTs) with a visible effect of branching in alcohols. Deuteration of alcohols in the hydroxyl group results in a decrease of the UCST of the given system and the largest shift is observed for tert-butyl alcohol. These solvent isotope effects nicely correlate with the polarity expressed by dielectric constants or E(T)(30) parameters of alcohols. The effect of the isotope substitution on the miscibility of ILs with butanols can be rationalized by using the statistical-mechanical theory of the isotope effects coupled with a phenomenological g(E) model. Following this procedure one finds that the isotope shift of UCST is associated mainly with the zero-point energy contribution.     

Effect of temperature on the physical properties of 1-butyl-3-methylimidazolium based ionic liquids with thiocyanate and tetrafluoroborate anions,and 1-hexyl-3-methylimidazolium with tetrafluoroborate and hexafluorophosphate anions

The effect of temperature on the physical properties of some ionic liquids was investigated. Density, refractive index, surface tension, dynamic and kinematic viscosities of 1-butyl-3-methylimidazolium based ionic liquids with thiocyanate and tetrafluoroborate, and 1-hexyl-3-methylimidazolium with tetrafluoroborate and hexafluorophosphate anions were measured at various temperatures (density from T = (278.15 to 363.15) K, refractive index from (293.15 to 343.15) K, surface tension from (283.15 to 333.15) K, dynamic viscosity from (283.15 to 368.15) K, and kinematic viscosity from (298.15 to 363.15) K). The volumetric properties for the ionic liquids were also calculated from the experimental values of the density at T = 298.15 K. The Vogel–Fulcher–Tammann (VFT) equation was applied to correlate experimental values of dynamic and kinematic viscosities as a function of temperature. As well, the relation between density and refractive index was correlated satisfactorily with several empirical equations such as Lorentz–Lorenz, Dale–Gladstone, Eykman, Oster, Arago–Biot, Newton and Modified–Eykman. Finally, the relation between surface tension and viscosity was investigated and the parachor method was used to predict density, refractive index and surface tension of the ionic liquids.     

Thermodynamic study of binary mixtures containing 1-butylpyridinium tetrafluoroborate and methanol, or ethanol

Densities and speeds of sound have been determined for the binary mixture (1-butylpyridinium tetrafluoroborate + methanol, or ethanol) over the temperature range 293.15 K to 323.15 K. From experimental values, excess volume and excess isentropic compressibility have been calculated. The mixtures give negative values for the excess properties. Besides, (vapour + liquid) equilibrium in isothermal conditions has been obtained for these systems at T = 303.15 K and T = 323.15 K, which has allowed us to derive activity coefficients and excess Gibbs functions. Positive deviations from Raoult’s law have been found. A detailed analysis and interpretation of results have been carried out in structural and energetic terms using thermodynamic information of the pure compounds.