Mechanism and Kinetics for the Reaction of NCS and OH Radicals

The mechanism and dynamical properties for the reaction of NCS and OH radicals have been investigated theoretically. The minimum energy paths (MEP) of the reaction were calculated using the density functional theory(DFT) at the B3LYP/6-311 G^** level, and the energies along the MEP were further refined at the QCISD(T)/6-311 G^** level. As a result, the reaction mechanism of the title reaction involves three channels, producing HCS NO and HNC SO products, respectively. Path Ⅰ and path Ⅱ are competitive, with some advantages for path Ⅰ in kinetics. As for path Ⅲ, it looks difficult to react for its high energy barrier. Moreover, the rate constant have been calculated over the temperature range of 8190-2500K using canonical variational transition-state theory (CVT). It was found that the rate constants for both path Ⅰ and path Ⅱ are negatively dependent on temperature, which is similarwith the experimental results for reactions of NCS with NO and NO2, and the variational effect for the rate constant calculation olavs an important role in whole temperature range.     

Total synthesis of infectopyrone,aplysiopsenes A–C,ent-aplysiopsene D,phomapyrones A and D, 8,9-dehydroxylarone,and nectriapyrone

The total synthesis of the 2-pyrone natural products nectriapyrone, aplysiopsenes A–C, ent-aplysiopsene D, phomapyrones A and D, and of 8,9-dehydroxylarone were achieved by Wittig olefination starting with vermopyrone. Infectopyrone was synthesized by Horner–Wadsworth–Emmons reaction starting with phomapyrone D. Racemic phomapyrone C methyl ether was obtained by hydrogenation of nectriapyrone. The total syntheses were achieved starting from commercially available 3,5-heptanedione and led to the desired natural products in 18–46% over 5–6 steps, whereupon all five-step syntheses were carried out with a single chromatographic workup. The total synthesis of infectopyrone, aplysiopsenes A–D, of phomapyrones A and D, and of 8,9-dehydroxylarone were achieved for the first time, giving unambiguous proof for the proposed structures of these natural products.     

Vibronic coupling in the A2Π and B2Σ+ electronic states of the NCS radical

The spin-rovibronic energy levels of the A(2)Π and B(2)Σ(+) electronic states of thiocyanate radical have been calculated variationally, using high-level ab initio coupled diabatic potential energy surfaces. Computations up to J = 7∕2 have been performed, obtaining all levels with K ≤ 3 (Σ(1/2),Π(1/2,3/2),Δ(3/2,5/2),Φ(5/2,7/2)), for energies up to 2000 cm(-1) above the A(000)(2)Π(3∕2) level. The available experimental data have been critically reviewed in the light of the theoretical findings.     

Manipulation and capture of Aβ amyloid fibrils and monomers by DC insulator gradient dielectrophoresis (DC-iGDEP)

Here we report a novel method for the manipulation and concentration of Aβ amyloid fibrils, implicated in Alzheimer's disease, using DC insulating gradient dielectrophoresis (DC-iGDEP). Fibril enrichment was found to be ～400%. Simulations suggest that capture of the full range of amyloid protein aggregates is possible with optimized device design.     

The Synthesis,Characterization and DC Electrical Conductivity of Polypyrrole‐Zirconium Complex

Polypyrrole‐zirconium complex has been synthesized by reacting 2‐amino‐3,4‐dicyano‐5‐mercaptopyrrole with zirconium nitrate in absolute ethanol under reflux for 24 h. The product has been characterized by elemental analyses, FTIR spectroscopy, in addition to thermal analysis (TGA and DSC) and its solubility has been investigated. The DC electrical conductivity variation of polypyrrole‐zirconium complex has been studied in the temperature range 300–500 K after annealing for 24 h at 100°C and doping with I₂, FeCl₃ and CuCl₂ · H₂O for comparison. An attempt has been made to interpret the DC electrical conductivity behavior and thermal properties to chain length, dopant used, polymer structure and attached groups.     

Low-temperature heat capacities and thermodynamic properties of rare-earth triisothiocyanate hydrates (Ⅲ)——Sm(NCS)_3·6H_2O,Gd(NCS)_3·6H_2O,Yb(NCS)_3·6H_2O and Y(NCS)_3·6H_2O

The heat capacities of four RE isothiocyanate hydrates,Sm( NCS)3 6H2O,Gd( NCS)3 6H2O,Yb(NCS)3 6H2O and Y( NCS)3 6H2O,have been measured from 13 to 300 K with a fully-automated adiabatic calorimeter No obvious thermal anomaly was observed for the above-mentioned compounds in the experimental tem-peiatnre ranges.The polynomial equations for calculating the heat capacities of the four compounds in the range of 13-300K were obtained by the least-squares fitting based on the experimental Cp data.The Cp values below 13 K were estimated by using the Debye-Einstem heat capacity functions.The standard molar thermodynamic functions were calculated from 0 to 300 K.Gibbs energies of formation were also calculated.     

A Novel, Simple and Efficient Synthesis of Ferrocenyl Enones and Alkynols

Propargylic alcohols are versatile precursors to many organic molecules including natural products and pharmaceutical compounds.[1] In our continuing interest in the development of practical methods for synthesis of ferrocene derivatives, we decided to investigate the efficiencies of ferrocenylacetylene addition to aromatic aldehydes under t-BuOKcatalyzed condition.[2] Interestingly, we found that the usually reliable coupling reaction between terminal alkyne of type 1 and aromatic aldehydes of type 2 does not furnish the expected propargylic alcohols, but that the isomeric aryl enones 3are found in high yield and very short reaction time (10～20 min). This provided a promising protocol for preparation of ferrocenyl chalcones in a practical, economical and mild sense compared with the traditional method. To the best of our knowledge, this unusual reaction was first observed for the addition of ferrocenylacetylene to aldehyde in a base-catalyzed manner (Eq. 1).     

Copper(II) complexes of thiazolylazo dye with triphenylphosphine and or NCS− as coligands: synthesis,spectral characterization,electrochemistry and luminescence properties

A series of copper(II) complexes [Cu(L₁ or L₂ or L₃)(PPh₃)₂(N₃)₂] (1a–3a) and [Cu(L₁ or L₂ or L₃)(PPh₃)₂(NCS)₂] (1b–3b) (where L₁ = 4-(4′-phenyl,2′-thiazolylazo)chlorobenzene, L₂ = 4-(4′-phenyl,2′-thiazolylazo)bromobenzene, and L₃ = 4-(4′-phenyl,2′-thiazolylazo)iodobenzene) have been prepared and characterized on the basis of microanalytical data, molar conductances, magnetic moments, UV-Vis, infrared, and ESR spectra. On the basis of electronic spectra and magnetic susceptibility octahedral geometry has been proposed for the complexes. The ESR spectral data provide information about their structures on the basis of Hamiltonian parameters and degree of covalancy. The electrochemical behavior of the complexes showed that the redox responses of Cu(II) complexes shifted to more negative potential with decrease in electron-withdrawing substituents on the azo ligands. Complexes exhibit blue-green emission with high-quantum yield.     

Measurement of bisphenol A, bisphenol A ß-D-glucuronide, genistein, and genistein 4'-ß-D-glucuronide via SPE and HPLC-MS/MS

Bisphenol A (BPA) is a synthetic industrial reactant used in the production of polycarbonate plastics, and genistein is a natural phytoestrogen abundant in the soybean. Current studies investigating the endocrine-disrupting effects of concomitant exposures to BPA and genistein have warranted the development of an analytical method for the simultaneous measurement of BPA and genistein, as well as their primary metabolites, bisphenol A ?-d-glucuronide (BPA gluc) and genistein 4′-?-d-glucuronide (genistein gluc), respectively. All four analytes were extracted from rat plasma via solid phase extraction (SPE). Three SPE cartridges and four elution schemes were tested. Plasma extraction using Bond Elut Plexa cartridges with sequential addition of ethyl acetate, methanol, and acetonitrile yielded optimal average recoveries of 98.1 ± 1.8% BPA, 94.9 ± 8.0% genistein, 91.4 ± 6.1% BPA gluc, and 103 ± 6.1% genistein gluc. Identification and quantification of the four analytes were performed by a validated HPLC-MS/MS method using electrospray ionization and selective reaction monitoring. This novel analytical method should be applicable to the measurement of BPA, genistein, BPA gluc, and genistein gluc in urine, cultures, and tissue following in vivo exposures. While reports of the determination of BPA and genistein independently exist, the simultaneous optimized extraction and detection of BPA, genistein, BPA gluc, and genistein gluc have not previously been reported.     

Total Syntheses of Kopsaporine,Kopsinol and Kopsiloscine A

Kopsia alkaloids represent a complex class of natural products bearing a polycyclic ring system with two or three consecutive quaternary carbon centers. In this article, we report the first total synthesis of Kopsaporine related alkaloids. Features of our structure-unit-based strategy are an intramolecular Pummerer rearrangement induced nucleophilic cyclization/aza-Prins cyclization to construct the highly functional hexahydrocarbazole skeleton, an olefin migration vinylogous alkylation to establish the C20 all-carbon quaternary center, an iridium complex mediated radical addition to fuse the aspidofractine framework, an unprecedented IBX oxidation to introduce the α-hydroxyketone moiety, and a bioinspired retro-Aldol/Aldol reaction to convert kopsaporine to kopsiloscine A.     

Computational studies of σ-type weak interactions between NCO/NCS radicals and XY(X = H,Cl;Y = F,Cl,and Br)

The triatomic radicals NCO and NCS are of interest in atmospheric chemistry,and both the ends of these radicals can potentially serve as electron donors during the formation of σ-type hydrogen/halogen bonds with electron acceptors XY(X = H,Cl;Y = F,Cl,and Br).The geometries of the weakly bonded systems NCO/NCS···XY were determined at the MP2/aug-cc-pVDZ level of calculation.The results obtained indicate that the geometries in which the hydrogen/halogen atom is bonded at the N atom are more stable than those where it is bonded at the O/S atom,and that it is the molecular electrostatic potential(MEP)-not the electronegativity-that determines the stability of the hydrogen/halogen bond.For the same electron donor(N or O/S) in the triatomic radical and the same X atom in XY,the bond strength decreases in the order Y = F > Cl > Br.In the hydrogen/halogen bond formation process for all of the complexes studied in this work,transfer of spin electron density from the electron donor to the electron acceptor is negligible,but spin density rearranges within the triatomic radicals,being transferred to the terminal atom not interacting with XY.     

Chemical composition and antioxidant, α-glucosidase inhibitory and antibacterial activities of three Echeveria DC. species from Mexico

Three Echeveria species from Sinaloa, Mexico (Echeveria craigiana, Echeveria kimnachii and Echeveria subrigida) were analyzed for their content of antioxidant compounds (β-carotene, ascorbic acid, α-tocopherol, total phenolics and flavonoids) and the in vitro antioxidant (DPPH, ABTS, ORAC and β-carotene bleaching [β-CBM]), α-glucosidase inhibitory and antibacterial activities. The studied Echeveria species showed high α-tocopherol content (2.9–9.0 mg/100 g f.w.) and total phenolics as Gallic Acid Equivalents (GAE) (152.2–400.5 mg GAE/100 g f.w.). Antioxidant activities of the three Echeveria methanol extracts (ME) were higher than those of other well-known plants with this property; the activities of E. craigiana (ABTS, 65.91 μmol ET/g f.w.) and E. subrigida (β-CBM, 79.3%) were remarkable. The Echeveria ME showed stronger α-glucosidase inhibition (IC₅₀ 25.21–50.57 μg/mL) than acarbose (IC₅₀ 3.59 mg/mL) as well as high antibacterial activity (Minimal Inhibitory Concentrations, MICs ⩽ 1 mg/mL), mainly against Gram positive bacteria. The results showed the three Echeveria species had components/biological activities with high potential for food/pharmacological uses and could be exploited by sustainable management schemes.     

A,D-Oligomethylenic capping of α- and β-cyclodextrins

α- and β-cyclodextrins have easily been converted into basket molecules, the handle being an oligomethylenic chain bridging A and D positions on the primary rim. The size of the handle influences the complexing properties of these cyclodextrins. To cite this article: T. Lecourt et al., C. R. Chimie 6 (2003) 000–000.     

TiCl4, Dioxane—A Facile and Efficient System for De-O-Benzylation,De-O-Allylation,and De-O-Xylylation of Phenolic Ethers

Abstract

Simultaneous de-O-xylylation and reductive coupling was observed when 1 equiv. of the dialdehyde 2a/2b was treated with 5 equiv. of each TiCl₄ and Zinc which lead to the development of TiCl₄ in dioxane as a new system for the facile deprotection of phenolic ethers 4a–4d, 5a–5d, and 6a–6c.     

Synthesis, Structure, Magnetism and Electrochemical Properties of Linear Pentanuclear Complex: Ni5(μ-dmpzda)4(NCS)2

吡啶修饰的线性五核金属化合物[Ni5(μ-dmpzda)4(NCS)2][ dmpzda-H2=N,N’-Di(4-methyl pyrydin-2-yl)pyrazine-2,6-diamine]被合成并表征,其电化学和磁性被报告。 化合物含有接近180º的 Ni-Ni-Ni角,末端含有两个轴配体的Ni5 线性链。这个五核线性金属链被四个顺式的dmpzda2-配体螺旋包裹。化合物中存在两种类型的Ni-Ni键长：末端连接有轴配体的Ni-Ni键长被配体影响,其键长为2.3821 Å;内部的Ni-Ni距离比较短,为2.2959 Å。两末端的Ni(II)离子由于连接轴配体构成四方锥形(NiN4NCS)并存在较长的Ni-N 键长（2.103 Å),这个键长符合高自旋Ni(II)构型。内部的三个Ni-N 距离为1.886-1.906 Å,这样构成正方形平面(NiN4)并呈低自旋的顺磁构型。化合物显示了同[Ni5(μ-tpda)4(NCS)2]类似的磁性,即在化合物中两末端Ni(II)仍存在反铁磁性的作用。     

A facile synthesis of (+)/(−)-pentenomycin I and analogs,and their antimicrobial evaluation

This study reported a stereoselective synthesis of (+)/(+)-pentenomycin I in 4–5 steps through regioselective silylation, optical resolution and dihydroxylation, followed by an olefin formation, from a known racemic cyclopentenone prepared from 2-deoxy-d-glucose. We also accomplished the transformation of a common intermediate into a variety of analogs. In addition, the antimicrobial activities of the pentenomycin analogs were evaluated, which revealed important structural factors of pentenomycins for the antimicrobial activities.     

A comparative study of CE-SDS,SDS-PAGE,and Simple Western—Precision,repeatability, and apparent molecular mass shifts by glycosylation

SDS gel electrophoresis is a commonly used approach for monitoring purity and apparent molecular mass (Mr) of proteins, especially in the field of quality control of biopharmaceutical proteins. The technological installation of CE-SDS as the replacement of the slab gel technique (SDS-PAGE) is still in progress, leading to a continuous improvement of CE-SDS instruments. Various CE-SDS instruments, namely Maurice (CE-SDS/CE-SDS PLUS) and Wes by ProteinSimple as well as the microchip gel electrophoresis system LabChip® GXII Touch™ HT by PerkinElmer were tested for precision and repeatability compared to SDS-PAGE (Bio-Rad). For assessing these quality control parameters, standard model proteins with minor post-translational modifications were used. Overall, it can be concluded that the CE-SDS-based methods are similar to SDS-PAGE with respect to these parameters. Quality characteristics of test systems gain more significance by testing proteins that do not behave like model proteins. Therefore, glycosylated proteins were analyzed to comparatively investigate the influence of glycosylation on Mr determination in the different instruments. In some cases, high deviations were found both among the methods and with regard to reference values. This article provides possible explanations for these findings.     

Two New Monoterpene Diglycosides from Winchia calophylla A. DC

Two new monoterpene diglycosides, wincaloside A (1) and wincaloside B (2), along with loganin (3) were isolated from the stem barks of Winchia calophylla A. DC. The structures of 1 and 2 were established by spectroscopic and chemical methods.     

Isolation, Purification, and Properties of α-Amylase from Bacillus subtilis-7A

Cultivation ofBacillus subtilis-7A on waste from alcohol production yielded an active extracellular enzyme -amylase with MW 75 kDa. The enzyme was isolated from the culture medium by 60% saturated ammonium sulfate and purified until homogeneous by gel filtration on Sephadex G-100 and ion-exchange chromatography on DEAE-cellulose. The optimum temperatures for the complex and purified enzyme are 30 and 50°C, respectively. The optimum activity for both preparations occurred at pH 6.5. The substrate specificity of the isolated preparations was studied.