131I-labeled 5,10,15,20-tetrakis(4-hydroxyphenyl)porphyrin and 5,10,15,20-tetrakis(4-aminophenyl)porphyrin for combined photodynamic and radionuclide therapy

Journal of Radioanalytical and Nuclear Chemistry - Porphyrin derivatives are usually used for photodynamic therapy (PDT) and labeled with raidonuclide for radiopharmaceuticals. In this work,...     

Poly-5,10,15,20-tetrakis(4-hydroxyphenyl)porphyrin as a material for photovoltaic devices

1. Download : Download high-res image (120KB)
2. Download : Download full-size image

     

Synthesis of ferrocenyl-containing heterocyclic derivatives of 5-(4-aminophenyl)-10,15,20-triphenylporphyrin for sonodynamic therapy

The condensation of 1-(ferrocenylalkyl)pyrazole-3-carbaldehydes with 4′-aminotetraphenylporphyrin, followed by reduction with NaBH(OAc)₃ in 1,2-dichloroethane, provides a convenient method for the synthesis of 5-{4-[({1-[1-(ferrocen-1-yl)alkyl]-5-methyl-1H-pyrazol-3-yl}methyl)amino]phenyl}-10,15,20-triphenylporphyrins which exhibit pronounced cytotoxicity against Staphylococcus aureus under ultrasonic irradiation.     

5-(4-烟酸酰亚胺基)苯基-10,15,20-三苯基卟啉及其锌配合物的合成及性质研究

合成了未见文献报道的5-(4-烟酸酰亚胺基)苯基-10,15,20-三苯基卟啉配体(H₂P)及其锌配合物(ZnP), 并通过紫外-可见光谱、红外光谱、核磁共振氢谱、元素分析等测试方法对化合物的结构加以确认, 研究了配体和配合物的荧光光谱的变化和电化学性质. 热分析研究表明, 卟啉配体及配合物显示了很高的热稳定性, 超过390 ℃才开始分解.     

Synthesis and nanostructures of 5,10,15,20-tetrakis(4-piperidyl)porphyrin

A new water-soluble porphyrin, 5,10,15,20-tetrakis(4-piperidyl)porphyrin (T(4-Pip)P), has been synthesized. T(4-Pip)P is related to the extensively studied water-soluble porphyrin 5,10,15,20-tetrakis(4-pyridyl)porphyrin (T(4-Py)P) but has substituents with different electronic and hydrogen-bonding properties and is soluble over a much larger pH range due to the higher pK_a of its conjugate acid T(4-H-Pip)P⁴⁺. Investigations of the ionic self-assembly reactions of T(4-H-Pip)P⁴⁺ with anionic water-soluble porphyrins reveal that it forms nanoscale materials.     

5-[4-(1-Hydroxyethyl)phenyl]-10,15,20-triphenylporphyrin as a probe of the transition-state conformation in hydrolase-catalyzed enantioselective transesterifications

5-[4-(1-Hydroxyethyl)phenyl]-10,15,20-triphenylporphyrin (1a) and zinc porphyrin 1b were designed and synthesized to experimentally examine the validity of the transition-state model previously proposed for the lipase-catalyzed kinetic resolution of secondary alcohols. The lipases from Pseudomonas cepacia (lipase PS), Candida antarctica (CHIRAZYME L-2), Rhizomucor miehei (CHIRAZYME L-9), and Pseudomonas aeruginosa (lipase LIP) exhibited excellent enantioselectivity (E >100 at 30 degrees C). Subtilisin Carlsberg from Bacillus licheniformis (ChiroCLEC-BL) also showed high enantioselectivity for 1a (E = 140 at 30 degrees C), and the thermodynamic parameters were determined: DeltaDeltaH = -6.8 +/- 0.8 kcal mol(-1), DeltaDeltaS = -13 +/- 3 cal mol(-1) K(-1). Lipases and subtilisin showed R- and S-preference for 1, respectively. The mechanisms underlying the experimental observations are explained in terms of the transition-state models. The large secondary alcohol 1 is a powerful tool for investigating the conformation of the transition state of the enzyme-catalyzed reactions. The fact that 1 was resolved with high enantioselectivity strongly suggests that the gauche conformation, but not the anti conformation, is taken in the transition state, in agreement with the transition-state models involving the stereoelectronic effect.     

Noncovalent interaction of 5,10,15,20-tetrakis(4-N-methylpyridyl)porphyrin with Cucurbit[7]uril: a supramolecular architecture

Noncovalent interaction of two water-soluble synthetic macromolecules, Cucurbit[7]uril (CB7) and 5,10,15,20-tetrakis(4- N-methylpyridyl)porphyrin (TMPyP), has been studied from the viewpoint of organizing them through supramolecular interactions and thereby modulating their functional activities. Steady-state and time-resolved fluorescence measurements along with NMR results establish that CB7 crowns the N-methylpyridyl group of the TMPyP in a 1:4 stoichiometry. The overall binding constant was evaluated to be approximately 4.5 x 10 (19) M (-4). The high binding affinity, promoting a stable and extendable molecular assembly in aqueous solution, could open new frontiers in the design and synthesis of higher-order supramolecular structures with photofunctional moieties and project their utility in therapeutic applications.     

Halogen atom effect on photophysical and photodynamic characteristics of derivatives of 5,10,15,20-tetrakis(3-hydroxyphenyl)porphyrin

Brominated and iodinated derivatives of 5,10,15,20-tetrakis(3-hydroxyphenyl)porphyrin were synthesised directly from the corresponding aldehydes. Photophysical and photochemical properties, singlet oxygen formation quantum yields, photobleaching and log P were measured. Cellular uptake measurements and cytotoxicity assays on WiDr and A375 tumour cell lines were performed. 5,10,15,20-Tetrakis(2-bromo-5-hydroxyphenyl)porphyrin showed the best cytotoxicity with values of IC(50) of 113 nM over WiDr cells and 52nM over A375 cells.     

Phase behaviour of the discotic mesogen 5,10,15,20-tetrakis (4-n-dodecylphenyl)porphyrin under pressure

The phase behaviour of the discotic mesogen 5,10,15,20-tetrakis(4-n -dodecylphenyl)porphyrin (C12TPP) was investigated under hydrostatic pressures up to 300MPa by high pressure DTA and wide angle X-ray diffraction methods. The typical enantiotropic phase transitions of C12TPP, low- to high-temperature crystal (Cr2-Cr1), Cr1-discotic lamellar phase (DL), and DL-isotropic liquid (I) are observed at pressures up to 10MPa. Application of hydrostatic pressure to the sample generates a pressure-induced crystal polymorph (Cr3) between the Cr2 and Cr1 phases, and the phase transitions Cr2-Cr3-Cr1-DL-I occur reversibly in the pressure region between 10 and 180MPa. On heating at higher pressures above 180MPa, the fourth crystal polymorph (Cr4) is formed between the Cr2 and Cr3 phases at lower temperatures, and at the same time the fifth crystal polymorph (Cr5) appears abruptly between the Cr1 and DL phases at high temperatures. The Cr2-Cr4-Cr3-C1-(Cr5)-DL-I transition processes were observed at 180 200MPa. Further increasing the pressure above 270MPa induces entirely different thermal behaviour: only two peaks for the pressure-induced transition between the sixth and fifth polymorphs (Cr6-Cr5) and the Cr5-I transitions are detected at low and high temperatures on heating, while both the DTA and WAXD experiments on cooling show the formation of the DL phase as a monotropic phase between the I and Cr5 phases, indicating the I DL Cr5 Cr6 process. The thermal behaviour was ambiguous and complex in the pressure region between 200 and 260MPa because the peaks for the intermediate crystal transitions were too small to detect with confidence. The two different sequences of the Cr2-Cr4-Cr3-Cr1-DL-I and Cr6-Cr5-(DL)-I processes seems to occur competitively. The T vs. P phase diagram of a sample cooled at 300MPa was studied to determine the triple point of the DL phase and to investigate the phase stability of the pressure-induced crystal polymorphs. The Cr6-Cr5-I transition process was observed on heating at 200 and 300MPa, while the Cr6-Cr5-DL-I process was detected at lower pressures below 100MPa. Since the Cr5-DL transition temperature changes linearly with a slope dT/dP 40 degrees C/100 MPa, while the DL-I transition temperature changes slightly (dT/dP 5.5 degrees C/100MPa), the DL phase forms a triangle in the T vs. P diagram. The triple point of the DL phase was found to be 240.8MPa and 168.8 C. The Cr6 polymorph reorganized to the stable Cr2 form under atmospheric pressure on annealing at room temperature overnight.     

Phase behaviour of the discotic mesogen 5,10,15,20-tetrakis (4-n-dodecylphenyl)porphyrin under pressure

The phase behaviour of the discotic mesogen 5,10,15,20-tetrakis(4-n -dodecylphenyl)porphyrin (C12TPP) was investigated under hydrostatic pressures up to 300MPa by high pressure DTA and wide angle X-ray diffraction methods. The typical enantiotropic phase transitions of C12TPP, low- to high-temperature crystal (Cr2-Cr1), Cr1-discotic lamellar phase (DL), and DL-isotropic liquid (I) are observed at pressures up to 10MPa. Application of hydrostatic pressure to the sample generates a pressure-induced crystal polymorph (Cr3) between the Cr2 and Cr1 phases, and the phase transitions Cr2-Cr3-Cr1-DL-I occur reversibly in the pressure region between 10 and 180MPa. On heating at higher pressures above 180MPa, the fourth crystal polymorph (Cr4) is formed between the Cr2 and Cr3 phases at lower temperatures, and at the same time the fifth crystal polymorph (Cr5) appears abruptly between the Cr1 and DL phases at high temperatures. The Cr2-Cr4-Cr3-C1-(Cr5)-DL-I transition processes were observed at 180 200MPa. Further increasing the pressure above 270MPa induces entirely different thermal behaviour: only two peaks for the pressure-induced transition between the sixth and fifth polymorphs (Cr6-Cr5) and the Cr5-I transitions are detected at low and high temperatures on heating, while both the DTA and WAXD experiments on cooling show the formation of the DL phase as a monotropic phase between the I and Cr5 phases, indicating the I DL Cr5 Cr6 process. The thermal behaviour was ambiguous and complex in the pressure region between 200 and 260MPa because the peaks for the intermediate crystal transitions were too small to detect with confidence. The two different sequences of the Cr2-Cr4-Cr3-Cr1-DL-I and Cr6-Cr5-(DL)-I processes seems to occur competitively. The T vs. P phase diagram of a sample cooled at 300MPa was studied to determine the triple point of the DL phase and to investigate the phase stability of the pressure-induced crystal polymorphs. The Cr6-Cr5-I transition process was observed on heating at 200 and 300MPa, while the Cr6-Cr5-DL-I process was detected at lower pressures below 100MPa. Since the Cr5-DL transition temperature changes linearly with a slope dT/dP 40 degrees C/100 MPa, while the DL-I transition temperature changes slightly (dT/dP 5.5 degrees C/100MPa), the DL phase forms a triangle in the T vs. P diagram. The triple point of the DL phase was found to be 240.8MPa and 168.8 C. The Cr6 polymorph reorganized to the stable Cr2 form under atmospheric pressure on annealing at room temperature overnight.     

Chelation and fluorescence properties of tetraphenylporphyrin and 5,10,15,20-tetra(4-hydroxyphenyl)porphyrin in acetonitrile

The kinetics of complex formation between zinc and 5,10,15,20-tetraphenylporphyrin and 5,10,15,20-tetra(4-hydroxyphenyl)porphyrin in acetonitrile is studied in the temperature range from 298 to 318 K. The fluorescent properties of these compounds are examined, the emission in the red region of the spectrum is measured, and the fluorescence quantum yields are determined. It is found that although the electronic absorption spectra of the studied compounds are almost identical, hydroxyl substituents are observed to have a considerable effect on the chelating ability of ligands. The rate constant of the formation of ZnT(4-OH-Ph)P is thus approximately three times higher than that of ZnTPhP, with the energy consumption being lower (about 20 kJ mol^–1). The calculated fluorescence quantum yields of H₂TPhP, H₂T(4-OH-Ph) P, ZnTPhP, and ZnT(4-OH-Ph)P in acetonitrile are half those in toluene, while the ratio between the quantum yields of ligands and their metal complexes is a constant equal to approximately 3 and does not depend on which solvent is used.     

Synthesis and characterization of 5,10,15,20-tetra[3-(3-trifluoromethyl)phenoxy] porphyrin

The newly synthesized 5,10,15,20-tetra[3-(3-trifluoromethyl)phenoxy]porphyrin, TTFMPP, has been characterized using mass spectroscopy, 1H-, 13C- and 19F-NMR, MALDI-TOF mass spectrometry, UV-Vis and fluorescence spectrophotometry, and cyclic voltammetry. The NMR confirmed the structure of the compound and the mass spectrum was in agreement with the proposed molecular formula. The UV-Vis absorption spectrum of TTFMPP shows characteristic spectral patterns similar to those of tetraphenyl porphryin, with a Soret band at 419 nm and four Q bands at 515, 550, 590, and 648 nm. Protonation of the porphyrin with TFA resulted in the expected red shift of the Soret band. Excitation at 419 nm gave an emission at 650 nm. The quantum yield of the porphyrin was determined to be 0.08. Cyclic voltammetry was used to determine the oxidation and reduction potentials of the new porphyrin. Two quasi-reversible one-electron reductions at -1.00 and -1.32 V and a quasi-reversible oxidation at 1.20 V versus the silver/silver chloride reference electrode with tetrabutylammonium tetrafluoroborate as the supporting electrolyte in methylene chloride were observed.     

Synthesis and spectrophotometric study of the acid-base and complexing properties of 2,3,7,8,12,13,17,18-Octaethyl-5,10,15,20-tetrakis(4-methoxyphenyl)porphyrin in acetonitrile

2,3,7,8,12,13,17,18-Octaethyl-5,10,15,20-tetrakis(4-methoxyphenyl)porphyrin has been synthesized, and its acid-base and complexing properties in the systems 1,8-diazabicyclo[5.4.0]undec-7-ene-acetonitrile, acetonitrile-Zn(OAc)₂, and 1,8-diazabicyclo[5.4.0]undec-7-ene-acetonitrile-Zn(OAc)₂ have been studied by spectrophotometry. Titration of 2,3,7,8,12,13,17,18-octaethyl-5,10,15,20-tetrakis(4-methoxyphenyl)porphyrin with 1,8-diazabicyclo[5.4.0]undec-7-ene is accompanied by successive deprotonation of the pyrrole nitrogen atoms with formation of the corresponding mono- and dianion. The overall acid dissociation constant of the title compound has been determined. The complexation of neutral and doubly deprotonated 2,3,7,8,12,13,17,18-octaethyl-5,10,15,20-tetrakis(4-methoxyphenyl)porphyrin with Zn(OAc)₂ has been studied, and kinetic parameters for the formation of the zinc complex according to the molecular and ionic mechanisms have been determined. Extra coordination of 1,8-diazabicyclo[5.4.0]undec-7-ene by the zinc complex of 2,3,7,8,12,13,17,18-octaethyl-5,10,15,20-tetrakis(4-methoxyphenyl)porphyrin.     

Preparation, nano purification, quality control and labeling optimization of [64Cu]-5,10,15,20-tetrakis (penta fluoro phenyl) porphyrin complex as a possible imaging agent

Cu-64 was produced via the ⁶⁸Zn (p,αn)⁶⁴Cu nuclear reaction (≈200 mCi, >95 % chemical yield at 180 μA for 1.1 h irradiation, (radionuclidic purity >96 %, copper-67 as impurity) followed by purification with amino functionalized nano magnetic oxide, Fe₃O₄ aiming to remove trace amount of heavy metal ions from aqueous media due to achieve ultra pure [⁶⁴Cu] CuCl₂ for labeling step. [⁶⁴Cu] labeled 5,10,15,20-tetrakis(penta fluoro phenyl) porphyrin ([⁶⁴Cu]-TFPP) was prepared using freshly prepared [⁶⁴Cu] CuCl₂ (Cu-64; T _1/2 = 12.7 h) and 5,10,15,20-tetrakis(penta fluoro phenyl)porphyrin (H₂TFPP) for 60 min at 100 °C under reflux condition (radiochemical purity: >97 % ITLC, >98 % HPLC, specific activity: 14–16 GBq/mmol). Stability of the complex was checked in final formulation and human serum for 24 h. The partition coefficient was calculated for the compound (log P = 0.73). The biodistribution of the labeled compound in vital organs of wild-type rats was studied using scarification studies and PET imaging up in 2 and 4 h after injection. A detailed comparative pharmacokinetic study performed for ⁶⁴Cu cation and [⁶⁴Cu]-TFPP. The complex is mostly washed out from the circulation through kidneys and liver and can be an interesting tumor imaging/targeting agent due to high specific uptake and rapid excretion through the urinary tract.     

Novel Substitution Reactions of 5-(4-Nitrophenyl)-10,15,20-triphenyl porphyrin with Nucleophilic Reagents

Substitution reactions of 5-(4-nitrophenyl)-10,15,20-triphenylporphyrin (1)and its Ni(Ⅱ) complexe 2 with different nucleophilic reagents were studied for preparing asymmetric porphyrin. The reaction products are different with the nucleophilic reagents changing. Diporphyrin (3) was obtained when compound 1 reacted with sodium phenoxide or diphenoxide ion in DMF solution. Whereas the nitro group was reduced and 5-(4-amino-phenyl)-10,15,20-triphenylporphyrinato Nickel(Ⅱ) (4) was achieved when compound 2 reacted with above nuleophilic reagents in the same condition. The reductive product 5-(4-aminophenyl)-10,15,20-triphenylporphyrin (5) was also achieved when 1 reacted with mercaptoethanol or thiophene and lithium hydroxide. While the nitro group was substituted by cyanide anion and 5-(4-nitrilephenyl)-10,15,20-triphenylporphyrin (6) was achieved when 1 reacted with sodium cyanide.     

Lanthanide Complexes with Acetylacetonate and 5,10,15,20-Tetra[para-(4-chlorobenzoyloxy)phenyl]porphyrin

The lanthanide complexes of acetylacetonate and5 ,1 0 ,1 5 ,2 0 - tetra[para- (chlorobenzoy-loxy) phenyl] porphyrin having a general formula Ln[(cbop) 4 p] acac(where Ln=Tb,Ho,Er,Tm;cbop=(4- chlorobenzoyloxy) phenyl;Hacac=acetylacetone;p=porphyrin) wereprepared and characterized.The structure of the complexs was proposed.Metalloporphyrins have been providing an active research field since the beginning of thiscentury because of their involvementin various chemical and biological processes.T…     

Immobilization of 5,10,15,20-tetrakis(4’-carboxyphenyl)porphyrin on the surface of a modified polypropylene film

The immobilization of 5,10,15,20-tetrakis(4’-carboxy-phenyl)porphyrin on the surface modified polypropylene films was investigated. To activate the surface of the polypropylene the method of structural-chemical modification of the acrylamide and polyvinyl alcohol developed, which can increase the number immobilizing porphyrin 15–20 times. Modified materials possess of antimicrobial activity.