Structure and properties of the pure and Pr-doped Ge25Ga5Se70 and Ge30Ga5Se65 glasses

The Ge₂₅Ga₅Se₇₀ and Ge₃₀Ga₅Se₆₅ pure and Pr³⁺-doped glasses were prepared by direct synthesis from elements and PrCl₃. It was found that up to 1 mol% PrCl₃ can be introduced in the Ge₂₅Ga₅Se₇₀ and Ge₃₀Ga₅Se₆₅ glasses. Both types of glasses with overstoichiometric and substoichiometric content of Se were homogeneous and of black color. The optical energy gap is E^opt_g=2.10 eV, and the glass transition temperature is T_g=543 K for Ge₂₅Ga₅Se₇₀ and T_g=633 K for Ge₃₀Ga₅Se₆₅. The long-wavelength absorption edge is near 14 μm and it corresponds to multiphonon processes. Doping by Pr³⁺ ions creates absorption bands in transmission spectra, which can be assigned to the electron transitions from the ground ³H₄ level to the higher energy levels of Pr³⁺ ions ³H₅, ³H₆, ³F₂, ³F₃ and ³F₄, respectively. By excitation with YAG:Nd laser line (1064 nm), two intense luminescence bands (1343 and 1601 nm) were excited. The first band can be ascribed to electron transitions between ¹G₄ and ³H₅ energy levels of Pr³⁺ ions. Full width at half of maximum (FWHM) of the intensity of luminescence was found to be 70 nm for (Ge₂₅Ga₅Se₇₀)_1 − x(PrCl₃)_x and (Ge₃₀Ga₅Se₆₅)_1 − x(PrCl₃)_x glasses. The FWHM in selenide glasses is lower than in halide and sulphide glasses. The second luminescence band (1601 nm) can be probably ascribed to the transitions between ³F₃ and ³H₄ energy levels of Pr³⁺ ions. The absorption and luminescence spectra of Pr³⁺ ions in studied glasses are slightly influenced by stoichiometry of glassy matrix. The Raman spectra of studied glasses were deconvoluted and assignment of Raman bands to individual vibration modes of basic structural units was suggested. The structure of studied glasses is mainly formed by corner-sharing and edge-sharing GeSe₄ tetrahedra. The vibration modes of Ga-containing structural units were not found, they are apparently overlapping with Ge-containing structural units due to small difference between atomic weights of Ge and Ga. In the glasses with substoichiometry of Se, the Ge–Ge bonds of Ge₂Se₆ structural units were found. In Se-rich glasses the Se–Se vibration modes were found. In all studied glasses also ‘wrong' bonds between like atoms were found in small amounts. Maximum phonon energy of studied glasses is 320 cm⁻¹.     

Electronic traps in mixed Si1−xGexO2 films

Thermally stimulated luminescence (TSL) and infrared (IR) spectroscopy were measured in plasma grown Si_1−xGe_xO₂ (x=0, 0.08, 0.15, 0.25, 0.5) with different thicknesses (12–40 nm). A comparison with the TSL properties of thermally grown SiO₂ and GeO₂ was also performed. A main IR absorption structure was detected, due to the superposition of the peaks related to the asymmetric O stretching modes of (i) Si–O–Si (at ≈1060 cm⁻¹) and (ii) Si–O–Ge (at 1001 cm⁻¹). Another peak at ≈860 cm⁻¹ was observed only for Ge concentrations, x>0.15, corresponding to the asymmetric O stretching mode in Ge–O–Ge bonds. A TSL peak was observed at 70°C, and a smaller structure at around 200°C. The 70°C peak was more intense in all Ge rich layers than in plasma grown SiO₂. Based on the thickness dependence of the signal intensity we propose that at Ge concentrations 0.25x0.5 TSL active defects are localised at interfacial regions (oxide/semiconductor, Ge poor/Ge rich internal interface, oxide external surface/atmosphere). Based on similarities between TSL glow curves in plasma grown Si_1−xGe_xO₂, thermally grown GeO₂ and SiO₂ we propose that oxygen vacancy related defects are trapping states in Si_1−xGe_xO₂ and GeO₂.     

Viscosity matching of new PbF2–InF3–GaF3 based fluoride glasses and ZBLAN for high NA optical fiber

New multicomponent PbF₂–InF₃–GaF₃ bulk glasses have been investigated. They show lower phonon energy (540 cm⁻¹) in comparison with 580 cm⁻¹ for ZBLAN. Large PbF₂ concentration provided glasses with high refractive index up to 1.582 and the viscosity curves revealed an excellent thermal compatibility with ZBLAYN glass. A multimode fiber with a numerical aperture of 0.51, a loss of 0.85 dB/m at 1.3 μm was fabricated using the rotational casting method.     

An infrared study of crystallization in sodium-disilicate glasses containing iron oxides

The infrared absorption spectra of sodium-disilicate glasses containing various amounts of Fe₂O₃ ([Na₂O · 2 SiO₂]_1−x [Fe₂O₃]_x, where X = 0.05, 0.1 and 0.2) were investigated in the wavenumber range from 200–2000 cm⁻¹. The addition of Fe₂O₃ to the sodium-disilicate glass does not seem to introduce any new absorption band as compared with the spectrum of a pure sodium-disilicate glass; nevertheless, a general shift of the existing absorption bands toward lower wavenumbers is observed. The amount of shift is, in fact, proportional to the content of Fe₂O₃ in the glass. This observation is consistent with the recently proposed structural model for the bonding of Fe³⁺ ions in the iron-sodium-silicate glass system.

Annealing of 20 mol% iron oxide glasses at 550 and 580°C produced an extra sharp infrared absorption peak at about 610 cm⁻¹ wavenumber. This new peak is believed to be related to the crystallized particles of the glass as concluded from both a scanning electron micrograph and an electron diffraction pattern.     

Infrared absorption and structure of chlorophosphate glasses

The infrared absorption spectra of glasses in the NaPO₃---ZnCl₂ system were studied in the range of 4000−350 cm⁻¹. The results were interpreted using a local mode approach based on existing frequency charts. A continuous structural breakdown of the glass structure occurs upon addition of ZnCl₂ to the NaPO₃ polymer, with a consequent decrease in its chain length. The actual structure of the chlorophosphate glasses is discussed on the basis of possible anionic groups present. There is evidence for the occurrence of mixed oxychloride coordination shells. The density and glass transition temperature of the glasses were also determined.     

Effects of ion implantation on intermediate range order: IR spectra of silica

The reflectance spectra of ion implanted SiO₂ glasses has been measured from 5000 cm⁻¹ to 400 cm⁻¹. The silica was implanted with Ti, Cr, Mn, Fe, Cu and Bi to nominal doses ranging from 1×10¹⁵ ions/cm² to 1.2×10¹⁷ ions/cm² at an energy of 160 keV and currents of approximately 2.6 μA/cm². Changes in the intensity of the 1232 cm⁻¹ and 1015 cm⁻¹ vibrational modes are attributed to changes in the intermediate range order (IRO) and to changes in the concentration of non-bridging oxygen (NBO) defects in the implanted layer. These changes are ion and dose dependent. The differing effects on IRO and NBO are attributed to the chemical interaction of the implanted ions with the substrate.     

Static B NMR studies of the short range order in alkali metal modified B2S3 glasses

The ¹¹B NMR spectra of xRb₂S+(1−x)B₂S₃ glasses in the range 0x0.75 and of xCs₂S+(1−x)B₂S₃ glasses in the range 0x0.60 are reported. The addition of Rb₂S to B₂S₃ creates on average approximately two and one-half tetrahedral borons for each added sulfur ion, whereas it is found that the addition of Cs₂S creates approximately 2 tetrahedral borons for each added sulfur ion. This behavior while more similar to that seen in the alkali borate glasses, contrasts that seen in the Na and K thioborate glasses, where six to eight and three, respectively, tetrahedral borons are formed for every sulfide anion added to the glass. These findings are supported by the IR and ¹¹B NMR spectra of the di-thioborate polycrystals (c-Rb₂S:2B₂S₃ and c-Cs₂S:2B₂S₃) whose structures appear to be comprised of two BS₄ tetrahedrals and two BS₃ trigonals (N₄0.5) like that in the alkali di-borate phases for both Rb and Cs. Unlike the ¹¹B NMR resonances of the sodium thioborate glasses where a single sharp line is observed for the tetrahedral boron site and a single quadrupolar broadened line is observed for all the trigonal sites, a third resonance line is observed at high alkali fractions for the rubidium and cesium thioborate glasses. This new structural feature may arise from asymmetric MBS₂ (meta-thioborate groups) or tetrahedral boron groups possessing a non-bridging sulfur.     

A comparison between the Raman modes of the tetrahedral network in amorphous and layered crystalline GeSe2

The characteristic A₁ peak at 199 cm⁻¹ in the Raman spectrum of amorphous GeSe₂ were compared with the peaks at 211 and 216 cm⁻¹ in the spectrum of crystalline GeSe₂. It was proved that the crystalline 216 cm⁻¹ peak is an intrinsic mode which is enhanced by the bulk exciton transition. From a model calculation using a valence force field and bond polarizability, the 211 cm⁻¹ peak was assigned to in-phase breathing vibrations extended along the GeSe₄ tetrahedral chain structure, while the 216 cm⁻¹ peak was attributed to in-phase breathing vibrations quasi-localized at the GeSe₄ edge-sharing tetrahedra. The phonon density of states in the crystal has a doublet peak similar to the amorphous Raman spectrum. A correspondence between the amorphous and the crystalline Raman spectra was proposed.     

XAS study of lanthanum coordination environments in glasses of the system K2O---SiO2---La2O3

The La L₁ and L₃ XANES and L₃ EXAFS have been investigated for the series of glasses 10K₂O---50SiO₂---x La₂O₃ (x = 1, 5, 10) and (10 − x)K₂O---40SiO₂−(x/3)La₂O₃ (x = 7.5, 5, 2.5) and model compounds La₂O₃, LaAlO₃, LaPO₄, La₂NiO₄, La₂CuO₄ and La(OH)₃. An edge resonance at 25 eV above the L₁ edge in the glass spectra is concentration-dependent, decreasing in intensity with increasing lanthanum concentration. The 2s → nd forbidden transition increases with La₂O₃ concentration, indicating a reduction in the ‘average’ site symmetry of the first coordination shell of La. Mapping _X(k) space, which is a new and promising technique, was employed to extract bond distance, coordination number and thermal parameters from the EXAFS. By this method, one calculates the complete _X(k) space a function of all physically reasonable values of the adjusted parameters in all possible combinations. The advantage in this method is the assurance of a global minimum. Bond lengths were comparable to those obtained by Fourier transforming the phase corrected EXAFS. The values are 2.42 Å (± 0.03 Å) for La---O. The coordination numbers (N ≤ 7 ± 1.5) were derived by mapping and comparison to the published structures for other La compounds. _X(k) mapping is compared with least-squares fitting the data, and the correlation between the Debye-Waller factor and coordination number is also discussed.     

Phonons in TiO2---SiO2 glasses

We report the infrared and Raman studies of titanium doped vitreous silica glasses for a number of titanium concentrations. The vibrational modes associated with the randomly oriented chains of SiO₄ tetrahedra show broadenings and shifts. The LO-TO splitting of some Raman active modes decreases with increasing titanium concentration. This is attributed to the decrease in long-range coulomb fields associated with the chains of SiO₄ tetrahedra which are broken by the titanium atoms. The results are discussed in the context of random network models. An increase in the average intertetrahedral angle of the SiO₄ network is calculated from the data. This explains the anomalous decrease in the density of TiO₂---SiO₂ glasses with increasing titanium content. We identify two new modes associated with the distorted titanium tetrahedra. A polarized Raman mode at 1115 cm⁻¹ which is infrared inactive and an unpolarized Raman mode at 945 cm⁻¹ which is infrared active are observed.     

Elastic constant anomaly in Fe80−xMoxB20 metallic glasses

The extensional sound velocities V_E of Fe_80−xMo_xB₂₀(x = 6, 7, 8) metallic glasses have been measured between 100 and 600 K in a saturating magnetic field. Young's modulus (E = _E², = density) shows anomalous temperature dependence at and below the magnetic transition temperature of each glass studied. These anomalies are interpreted as arising from the change of long-range spin coupling energy at the Curie temperature in a molecular field approximation. Comparison is made with similar effects in other crystalline and non-crystalline magnetic materials.     

Mössbauer studies on some glasses and crystals in the Na2O---Fe2O3---SiO2 system

Mössbauer absorption measurements have been made at room temperature on ⁵⁷Fe in iron sodium silicate glasses containing 3–15 mol% Fe₂O₃ and various iron alkali silicate crystals in order to study the state of iron in these glasses. The spectra of all the glasses gave one doublet with a quadrupole splitting varying from 0.73–0.78 mm s⁻¹, while those of Na₂O · Fe₂O₃ · 4 SiO₂ and 5 Na₂O · Fe₂O₃ · 8 SiO₂ crystals showed much smaller quadrupole splitting, 0.28 mm s⁻¹ and 0.10 mm s⁻¹, respectively, and an asymmetrical doublet of much narrower linewidth. When sodium was replaced by other alkali metals of larger size, such as K and Cs, in MFeSi₂O₆ and MFeSi₃O₈ crystals, the quadrupole splitting became wider and approached to 0.73 mm s⁻¹. Such a variation was not observed for glasses. These results suggest that a larger number of non-identical sites exist in iron sodium silicate glasses than in the corresponding crystals.     

Silicate groupings in glassy and crystalline 2PbO·SiO2

The type and the amount of silicate groupings existing in glassy and crystalline 2PbO·SiO₂ have been determined by direct chemical methods: paper chromatography, trimethylsilylation combined with gas-liquid partition chromatography and by the molybdate method. The results obtained by these three different methods are in good agreement and demonstrate, that glassy 2PbO·SiO₂ and each of the three main crystalline polymorphs are characterized by its own specific silicate anion distribution: the distribution in vitreous 2PbO·SiO₂ is of a polyanionic nature; in T---Pb₂SiO₄ dimetic groups [Si₂O₇]⁶⁻ prevail; M₁---Pb₂SiO₄ contains predominantly [Si₄O₁₂]⁸⁻ rings and H---Pb₂SiO₄ is a typical polysilicate with chain anions [SiO₃²⁻]_n. The results fit a structural model according to which glass is a random array of discrete polyatomic groupings; the gradual transition from the glassy state to the stablest crystalline structure is connected with degradation and polymerization of silicate anions.     

Growth and properties of (Pb0.90La0.10)TiO3 thick films prepared by RF magnetron sputtering with a PbO buffer layer

The (Pb_0.90La_0.10)TiO₃ [PLT] thick films (3.0 μm) with a PbO buffer layer were deposited on the Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrates by RF magnetron sputtering method. The PLT thick films comprise five periodicities, the layer thicknesses of (Pb_0.90La_0.10)TiO₃ and PbO in one periodicity are fixed. The PbO buffer layer improves the phase purity and electrical properties of the PLT thick films. The microstructure and electrical properties of the PLT thick films with a PbO buffer layer were studied. The PLT thick films with a PbO buffer layer possess good electrical properties with the remnant polarization (P_r=2.40 μC cm⁻²), coercive field (E_c=18.2 kV cm⁻¹), dielectric constant (ε_r=139) and dielectric loss (tan δ=0.0206) at 1 kHz, and pyroelectric coefficient (9.20×10⁻⁹ C cm⁻² K⁻¹). The result shows the PLT thick film with a PbO buffer layer is a good candidate for pyroelectric detector.     

Heavily carbon-doped p-type (In)GaAs grown by gas-source molecular beam epitaxy using diiodomethane

Heavily carbon-doped p-type In_xGa_1−xAs (0≤x<0.49) was successfully grown by gas-source molecular beam epitaxy using diiodomethane (CH₂I₂), triethylindium (TEIn), triethylgallium (TEGa) and AsH₃. Hole concentrations as high as 2.1×10²⁰ cm⁻³ were achieved in GaAs at an electrical activation efficiency of 100%. For In_xGa_1−xAs, both the hole and the atomic carbon concentrations gradually decreased as the InAs mole fraction, x, increased from 0.41 to 0.49. Hole concentrations of 5.1×10¹⁸ and 1.5×10¹⁹ cm⁻³ for x = 0.49 and x = 0.41, respectively, were obtained by a preliminary experiment. After post-growth annealing (500°C, 5 min under As₄ pressure), the hole concentration increased to 6.2×10¹⁸ cm⁻³ for x = 0.49, probably due to the activation of hydrogen-passivated carbon accepters.     

Dynamics of vitreous and molten zinc chloride

The dynamics of vitreous and molten zinc chloride have been studied with inelastic neutron scattering at the Intense Pulsed Neutron Source. The results are analyzed in terms of the scattering function, S(Q,E) and the effective vibrational density of states, G(E). The vibrational spectra of both glass and liquid are dominated by broad features centered at 15 and 35 meV which are identified with F₂ modes ZnCl₄²⁻ tetrahedra. The other two normal modes are note observed because of inadequate resolution and broadening and overlap resulting from coupling between tetrahedra. The behavior of ZnCl₂ is contrasted with other tetrahedrally coordinated glasses that have been studied with the same technique.     

Raman spectroscopic investigations of the effect of the doping metal on the structure of binary tellurium-oxide glasses

Raman studies over the range 10 to 1000 cm⁻¹ have been performed on binary tellurium-oxide glasses (1-x)TeO₂-xMO (M = Pb,Zn or Mg) prepared using a conventional melt technique. The intensities and positions of Raman bands observed in the range above 250 cm⁻¹ were found to depend both on the compound oxide and on the amount of doping. Indeed, the ratio of the intensity of the band around 680 cm⁻¹ (assigned to vibrations of TeO₄ trigonal bipyramids) with respect to that of the component around 750 cm⁻¹ (related to stretching-vibrations in TeO₃₊₁, TeO₃ and MO groups) are affected in different ways for the glass-modifier MgO and for the intermediate glass-formers PbO and ZnO. Concurrently, an explicit dependence on the compound oxide and amount of doping was also observed on the maximum of the boson peak (BP) in the low-frequency region around 40 cm⁻¹. The structural correlation lengths in the glasses, calculated using the model described by Shuker and Gammon, were found to be about 0.50 nm (1-x)TeO₂-xMgO glasses and around 0.65 nm for (1-x)TeO₂-xMO (M = Pb or Zn) glasses. All these results are interpreted in terms of the effect of the metal oxide on the changes induced in the structural arrangements of ¹_χ[TeO₄-TeO₃] chains.     

Infrared study of SiO2 sol to gel evolution and gel aging

The evolution of the gelation of silica gel was studied by means of Fourier transform infrared spectroscopy. The gel was prepared by hydrolysis and polycondensation of tetraethyl orthosilicate in the presence of water with HCl, and with formamide (DCCA) in methanol either added or not. For both systems the gelation process was followed by the time evolution of the ν-Si---O(H) and ν-Si---O(Si) absorption bands. In the systems which used formamide, the ν-Si---O(H) peak shifts from ≈ν = 950 cm⁻¹ for τ = 0 to ≈ν = 968 cm⁻¹ (t = t_gel) and tends to shifts to 975 cm⁻¹ over a long period of time (t = 100t_gel), and a slow rate evolution between 0.1 and 0.4 t_gel is observed. In the absence of formamide the same evolution is observed without the slow rate plateau. For ν-Si-O(Si) absorption bands, the band near 1075 cm⁻¹ remains practically unchanged in both systems during the experiment time, but the second absorption band at 1133 cm⁻¹ is split into two bands each having its own specific evolution, depending on composition and temperature.     

Study of electrical properties of MoO3–Fe2O3–P2O5 and SrO–Fe2O3–P2O5 glasses by impedance spectroscopy. II

The electrical and dielectric properties for three series of MoO₃–Fe₂O₃–P₂O₅ and one series of SrO–Fe₂O₃–P₂O₅ glasses were measured by impedance spectroscopy in the frequency range from 0.01 Hz to 3 MHz and over the temperature range from 303 to 473 K. It was shown in Part I that the MoO₃ is incorporated into phosphate network and the structure/properties are strongly influenced by the overall O/P ratio. The Fe₂O₃ content and Fe(II)/Fe_tot ratio in these glasses have significant effects on the electrical conductivity and dielectric permittivity. With decreasing Fe₂O₃ content in MoO₃–Fe₂O₃–P₂O₅ glasses with O/P at 3.5 the dc conductivity, σ_dc(ω) decreases for two orders of magnitude, which indicates that the conductivity for these glasses depends on Fe₂O₃ and is independent of the MoO₃ content. Also, the dielectric properties such as ^′(ω), ^″(ω) and σ_ac(ω) and their variation with frequency and temperature indicates a decrease in relaxation intensity with increase in the concentration of MoO₃. On the other hand, the dc conductivity for MoO₃–Fe₂O₃–P₂O₅ glasses with O/P > 3.5 increases with the substitution of MoO₃ which has been explained by an increase in the number of non-bridging oxygens and formation of Fe–O–P bonds that are responsible for formation of small polarons. The increase in the dielectric permittivity, ^′(ω) with increasing MoO₃ content is attributed to the increase in the deformation of glass network with increasing bonding defects. For SrO–Fe₂O₃–P₂O₅ glasses the conductivity and dielectric permittivity remained constant with increasing SrO.     

Vapor phase epitaxy of pure VO2 and V1−xCrxO2

The vapor phase epitaxy of thin epilayers of VO₂ and V_1−xCrxO₂ on TiO₂ transparent substrates is described. Chemical vapor deposition occurs by reacting a (VOCL₃/CrO₂Cl₂/H₂O/H₂) mixture at about 800°C using argon as a carrier gas. The preparation of pure VO₂ requires special care to make it homogeneously stoichiometric and to obtain steep concentration profiles at the TiO₂/VO₂ interface. Layers were obtained which had electrical and optical properties comparable to the best bulk crystals grown by other techniques. Homogeneous solid solutions of V_1−xCr_xO₂ epilayers were also grown for the first time in the range o < x < 0.17. Chromium concentration and homogeneity were determined by electron microprobe analysis. The separation coefficient k was also found to vary with x. It is close to unity below x = 0.001 and above this value Cr is incorporated more easily. High quality heteroepitaxial layers (1 cm² area, 1 to 30 μm thickness) of V_1−xCr_xO₂ have for the first time allowed the measurement of the optical absorption coefficient.