Synthesis and Reactivity of Phenylimidorhenium(V) Complexes with N‐[(N′,N′‐Dialkylamino)(thiocarbonyl)]benzamidines. Observation of a pH‐Dependent Isomerisation of Related Oxorhenium(V) Compounds

Reactions of [Re(NPh)Cl₃(PPh₃)₂] with N‐[(N′,N′‐dialkylamino)(thiocarbonyl)]benzamidines (H₂R₂tcb) (R₂ = Et₂, (CH₂)₂O(CH₂)₂) in methanol give mono‐chelates of the composition [Re(NPh)Cl₂(PPh₃)(HR₂tcb)] as the sole products independent of the amount of the added H₂R₂tcb. Addition of a supporting base such as NEt₃ results in hydrolysis of the Re=NPh bonds and partial hydrolysis of the thiocarbamoylbenzamidines. Orange‐brown, cationic oxorhenium(V) compounds of the formula [ReO(HR₂tcb)₂]Cl were isolated from such reaction mixtures in good yields, and the formation of small amount of the unusual sulfido/persulfido‐bridged Re^V dimer [{ReO(HEt₂tcb)}₂(μ‐S)(μ‐S₂)] give evidence for a considerable degree of ligand decomposition under such conditions. The products have been characterized by spectroscopic methods and X‐ray crystallography. Acidification of orange‐brown solutions of the five‐coordinate Re^V oxo complex [ReO(HEt₂tcb)₂]Cl causes an immediate change of the color and deep blue crystals of the neutral, six‐coordinate [ReOCl(HEt₂tcb)₂] can be isolated from the resulting mixture. Alternatively, the product can be prepared by a ligand‐exchange protocol starting from (NBu₄)[ReOCl₄] and H₂Et₂tcb. The pH‐dependent isomerization between [ReO(HEt₂tcb)₂]Cl and [ReOCl(HEt₂tcb)₂] is reversible.     

Electrochemical studies of bimetallic rhenium(III) complexes possessing two accessible mixed-valence states

Summary Bimetallic complexes of the general formula [Cl₃(PPh₃)₂Re^III(NCArCN)Re^III(PPh₃)₂Cl₃] (where NCArCN represents an aromatic dinitrile) have been prepared and their solution phase electrochemistry examined. Each of these complexes undergoes two one-electron metal-centred oxidations. The potential difference between these oxidations gives a measure of the stability of the Re^III/Re^IV mixed-valence state toward disproportionation, and ranges from <0.050 V in the most weakly coupled system (4,4-biphenyldicarbonitrile bridge) to ca. 0.200 V for the most strongly interacting metal centres (9,10-dicyanoanthracene bridge). Likewise, all of the complexes show two one-electron transfers in either simultaneous or sequential fashion depending on the nature of the bridge.     

Phenylimido Complexes of Technetium and Rhenium with Maleonitriledithiolate

[Tc(NPh)Cl₃(PPh₃)₂] or [Re(NPh)Cl₃(PPh₃)₂] react with two equivalents of Na₂mnt (mnt^2– = 1,2‐dicyanoethene‐1,2‐dithiolate) with formation of anionic complexes of the composition [M(NPh)(mnt)₂]^–. The products can be isolated as large red blocks of their AsPh₄⁺ salts. The complex anions contain square‐pyramidal coordinated metal atoms with the phenylimido ligands in apical positions. The M–N–C bonds are almost linear. A similar phenylimido complex with an additional amino group was synthesized from [Re(NC₆H₄‐4‐NH₂)Cl₃(PPh₃)₂]. The presence of such substituents may allow coupling of the metal complexes to biomolecules such as peptides, proteins, or sugars, provided the M=N bonds are sufficiently stable against hydrolysis.     

A SIMPLE ROUTE FOR SYNTHESES OF TRIHALIDE-BRIDGED CARBONYL DIRUTHENIUM(II,III) COMPLEXES: CRYSTAL AND MOLECULAR STRUCTURE OF ttt-[RuIICl2(CO)2(PPh3)2],[(CO)(AsPh3)2RuII(μ-Cl3)RuIIICl2(AsPh3)] AND ([CO)(PPh3)2RuII(μ-Br3)RuIIIBr2(PPh3)], SPECTROSCOPIES,ELECTROCHEMISTRY AND PROPERTIES

Abstract

The triply halide-bridged binuclear complexes [Ru₂Cl₅(CO)(AsPh₃)₃] (AsPh₃ = triphenylarsine), [Ru₂Cl₅(CO)(PPh₃)₂(AsPh₃)] (PPh₃ = triphenylphosphine), [Ru₂Cl₅(CO)(AsPh₃)₂(PPh₃)], [Ru₂ Br₅(CO)(PPh₃)₃], [Ru₂Cl₅(CO)(P{p-tol}₃)₂(PPh₃)] (P{p-tol}₃ = tri-p-tolylphosphine) and [Ru₂ Br₂Cl₃(PPh₃)₂(AsPh₃)] were prepared from the precursor compounds ttt-[RuX₂(CO)₂(P)₂] (X = Cl or Br) and [RuY₃(P')₂S]·S (Y = Cl or Br; P=PPh₃, AsPh₃ or P{p- tol}₃ and P' = AsPh₃ or PPh₃; S=DMA or MeOH, where DMA = N,N'-dimethylacetamide). The molecular structures of the binuclear complexes [Ru₂Cl₅(CO)(AsPh₃)₃] (P2_1/c), [Ru₂Br₅(CO)(PPh₃)₃] (P2_1/c) and ttt-[RuCl₂(CO)₂(PPh₃)₂] (P1) were determined by X-ray diffraction methods. The complexes are always formed by two Ru atoms bridged through three halide anions, two of which are × type (from the Ru^II precursor) and the other is Y type (from the ruthenium^III precursor) confirming our previously suggested mechanism for obtaining this class of complexes. The Ru^II atom is also coordinated to a carbon monoxide molecule and two P ligands from the ttt-starting isomer whereas the Ru^III atom is bonded to two non-bridging Y halides and one P' molecule. The presence of Ru^III was confirmed by EPR data, a technique that was also useful to suggest the symmetry of the complexes. The absence of intervalence charge-transfer transitions (IT) in the near infrared spectrum confirms that the binuclear complexes have localized valence. The IR spectra of the complexes show; (CO) bands close to 1970 cm^?1 and ν(Ru-Cl) or(Ru-Br) bands at about 230–380 cm^?1 corresponding to halides at terminal or bridged positions. Two widely separated redox processes, Ru^II/Ru^II←Ru^II/Ru^III→Ru^III/Ru^III, were observed by cyclic voltammetry and differential pulse voltammetry.     

New Rhenium(V) Nitrofuryl Semicarbazone Complexes.Crystal Structure of [ReOCl2(PPh3)(3‐(5‐Nitrofuryl)acroleine semicarbazone)]

The synthesis and characterization of the first two Re complexes with semicarbazone ligands is presented. Selected ligands are 5‐Nitro‐2‐furaldehyde semicarbazone (Nitrofurazone) ( L1 ) and its derivative 3‐(5‐Nitrofuryl)acroleine semicarbazone ( L2 ). Complexes of general formula [Re^VOCl₂(PPh₃) L ], where L = L1 and L2 , were prepared in good yields and high purity by reaction of [Re^VOCl₃(PPh₃)₂] with L in ethanol or methanol solutions. The complexes formula and molecular structures were supported by elemental analyses and electronic, FTIR, ¹H, ¹³C and ³¹P NMR spectroscopies. In addition, the crystal and molecular structure of [Re^VOCl₂(PPh₃) L2 ] was determined by X‐ray diffraction methods. [ReOCl₂(PPh₃)(3‐(5‐Nitrofuryl)acroleine semicarbazone)] crystallizes in the space group P‐1 with a = 11.2334(2), b = 11.3040(2), c = 12.5040(2) Å, α = 81.861(1), β = 63.555(1), γ = 83.626(1)°, and Z = 2. The Re(V) ion is in a distorted octahedral environment, equatorially coordinated to a deprotonated semicarbazone molecule acting as a bidentate ligand through its carbonylic oxygen and azomethynic nitrogen atoms, to an oxo ligand and a chlorine atom. The six‐fold coordination is completed by another chlorine atom and a triphenylphosphine ligand at the axial positions.     

Olefin‐Supported Rhenium(III) Terminal Oxo Complexes Generated by Nucleophilic Addition to a Cyclopentadienyl Ligand

The reactivity of the oxo Re^V β‐diketiminate, OReCl₂(BDI), with various cyclopentadienide (Cp) sources has been investigated. As a result, we have developed a route to a new class of terminal oxo complexes of Re^III supported by olefin moieties of substituted cyclopentadienes. The success of this pathway is due to the electrophilic nature of the Cp ligand in the cation, [ORe(η⁵‐Cp)(BDI)]⁺ ( 3⁺ ), which allows for nucleophilic attack by a variety of reagents under mild conditions. In contrast, ^tBuNC was found to attack at the oxo moiety to produce isocyanate by oxygen atom transfer.     

Voltammetry of oxorhenium(V) complexes containing the [O=Re−OR] core and substituted pyridine ligands

Compounds of the general formula [ORe(OR)Cl₂(PPh₃)₂] and [ORe(OEt)Cl₂(PPh₃)(py)], where R=alkyl or aryl and py=a substituted pyridine, were synthesized and their voltammetric behaviour investigated. For the former, the electron-transfer mechanism was observed to be dependent on solvent. In dry MeCN, a quasi-reversible oxidation and a reduction followed by a chemical reaction was observed. There were indications of nucleophilic attack on electrochemically generated [ORe(OEt)Cl₂(PPh₃)₂]⁺, forming an unstable species whose reduction potentials were strongly dependent on the identity of the nucleophile. Voltammetric and spectroscopic observations of the oxorhenium(V) alkoxypyridine complex indicate the pyridine to be labile in halogenated hydrocarbon solvents but not in Me₂CO, MeCN, or CCl₄. Electrochemical generation of [ORe(OEt)Cl₂(PPh₃)(Cl_xC_yH_z)]⁺ (x=1,2, or 3; y=1 or 2; z=2,3, or 4) appears to be followed by transfer of a hydrogen atom from the solvent to form [(HO)Re(OEt)Cl₂(PPh₃)]⁺. Various pyridine complexes of this type were preparedvia substitution reactions under mild conditions. Varying the reaction conditions allowed the synthesis oftrans-dioxotetrapyridyl complexes in excellent yield.     

Synthesis and structures of two ruthenium dibenzoylmethane triphenylphosphine mixed ligand complexes

The reaction of dibenzoylmethane (HDBM) with [RuCl₂(PPh₃)₃] in benzene in the presence of a supporting base (Et₃N) under reflux gives two different complexes, the side product as a green-yellow Ru(III) compound of composition [Ru^IIICl₂(DBM)(PPh₃)₂] (2) and the main product as a red Ru(II) complex of composition [Ru^II(DBM)₂(PPh₃)₂] (3). The products were studied by spectroscopic methods, cyclic voltammetry and X-ray single crystal diffraction. The molecular structure of 2 shows a distorted octahedral environment around the Ru atom with two phosphine ligands in trans positions. The octahedral complex 3 shows a cis arrangement of two phosphine ligands.     

A TRICHLORO-BRIDGED DIRUTHENIUM (II,III) COMPLEX: PREPARATION,PROPERTIES AND X-RAY STRUCTURE OF TRI(-μ-CHLORO) DICHLOROCARBONYLTRIS (TRIPHENYLPHOSPHINE)DIRUTHENIUM(II,III)

Abstract

The triply chloro-bridged binuclear complex [Ru₂Cl₅(CO)(PPh₃)₃]·CH₂Cl₂, (PPh₃ = triphenylphosphine), M_r = 1279.23, prepared from the precursor compound [RuCl₃(PPh₃)₂DMA]·DMA (DMA = N,N′-dimethylacetamide) and crystallizes in the monoclinic space group P2₁/c. The structure was solved from 6994 independent reflections for which I > 3σ(I) by Patterson and difference Fourier techniques and refined to a final R = 0.042. The complex is formed by two Ru atoms bridged through three chloride anions. One Ru atom is further coordinated to two non-bridging Cl atoms and a triphenylphosphine ligand, whereas the other is bonded to two PPh₃ ligands and a carbon monoxide molecule. The presence of Ru^III was confirmed by EPR data. The absence of an intervalence charge-transfer transition (IT) in the near-infrared spectrum suggests that the binuclear complex is of a localized valence type. The IR spectrum shows a ν_CO band at 1964cm^? and ν_Ru-Cl bands at 328, 280 cm^?1, corresponding to chlorides at terminal positions and 250, 225 cm^?1 for the bridged ones. Two redox processes, Ru^II/Ru^II (E_1/2 = -0.29 V) ← Ru^II/Ru^III ← (E_1/2 = 1.19 V) Ru^III/Ru^III, were observed by cyclic voltammetry.     

(PPh4)2[Cl2Re(N3S2)(μ‐NSN)(μ‐N≡ReCl3)]2 – ein Rhenium(VII)‐Komplex mit einer Nitrido‐, einer Dinitridosulfato(II)‐ und einer Rhena‐3,5‐dithia‐2,4,6‐triazino‐Funktion

(PPh₄)₂[Cl₂Re(N₃S₂)(μ‐NSN)(μ‐N≡ReCl₃)]₂ – a Rhenium(VII) Complex with a Nitrido, a Dinitridosulfato(II), and a Rhena‐3,5‐dithia‐2,4,6‐triazino Function The title compound has been prepared from PPh₄[Re^VIICl₄(NSCl)₂] with N(SiMe₃)₃ in dichloromethane solution to give red‐brown single crystals, which were suitable for a crystal structure determination. As a by‐product PPh₄[ReNCl₄] is formed. (PPh₄)₂[Cl₂Re^VII(N₃S₂)(μ‐NSN)(μ‐N≡Re^VIICl₃)]₂ ( 1 ): Space group P2₁/c, Z = 2, lattice dimensions at –80 °C: a = 1280.8(2), b = 1017.5(1), c = 2467.8(3) pm, β = 95.04(1)°, R = 0.049. The complex anion of 1 consists of a planar ReN₃S₂‐heterocycle which is connected with the second rhenium atom by a μ‐nitrido bridge as well as by a μ‐dinitridosulfato(II) ligand to form a planar Re₂(N)(NSN) six‐membered heterocycle. This [Cl₂Re(N₃S₂)(μ‐NSN)(μ‐N≡ReCl₃)]^– unit dimerizes via one of the N‐atoms of the (NSN)^4– ligand to give a centrosymmetric Re₂N₂ four‐membered ring.     

Chemistry of ruthenium in N2P2X2 (X = Cl, Br) coordination sphere: Synthesis, characterization and reactivities

Reaction of 2-(phenylazo)pyridine (pap) with [Ru(PPh₃)₃X₂] (X = Cl, Br) in dichloromethane solution affords [Ru(PPh₃)₂(pap)X₂]. These diamagnetic complexes exhibit a weakdd transition and two intense MLCT transitions in the visible region. In dichloromethane solution they display a one-electron reduction of pap near − 0.90 V vs SCE and a reversible ruthenium(II)-ruthenium(III) oxidation near 0.70 V vs SCE. The [Ru^III(PPh₃)₂(pap)Cl₂]⁺ complex cation, generated by coulometric oxidation of [Ru(PPh₃)₂(pap)Cl₂], shows two intense LMCT transitions in the visible region. It oxidizes N,N-dimethylaniline and [Ru^II(bpy)₂Cl₂] (bpy = 2,2′-bipyridine) to produce N,N,N′,N′-tetramethylbenzidine and [Ru^III(bpy)₂Cl₂]⁺ respectively. Reaction of [Ru(PPh₃)₂(pap)X₂] with Ag⁺ in ethanol produces [Ru(PPh₃)₂(pap)(EtOH)₂]²⁺ which upon further reaction with L (L = pap, bpy, acetylacetonate ion(acac⁻) and oxalate ion (ox²⁻)) gives complexes of type [Ru(PPh₃)₂(pap)(L)]ⁿ⁺ (n = 0, 1, 2). All these diamagnetic complexes show a weakdd transition and several intense MLCT transitions in the visible region. The ruthenium(II)-ruthenium(III) oxidation potential decreases in the order (of L): pap > bpy > acac⁻ > ox²⁻. Reductions of the coordinated pap and bpy are also observed.     

Synthesis and Characterization of Variable-valent Imidorhenium Species. A Family of Imidorhenium(VI) Amide Complexes and their Imidorhenium(V) Imine Precursors Related by Oxygen Atom Transfer

The synthesis of imidorhenium(V) [Re(NAr)Cl₃(L)] complexes is reported. Their reaction with dilute HNO₃ furnishes [Re(NAr)Cl₃(L′)] species incorporating monoionized iminoamide ligands (the ligands are abbreviated as L and L′ respectively). The iminoamide complexes exhibit sextet EPR spectra in CH₂Cl₂ solution at room temperature. They are electroactive in MeCN solution and to display two quasi reversible responses near 0.2 and 1.6 V which can be attributed to Re^V→Re^VI and Re^VI → Re^VII oxidations respectively. One of the [Re(NAr)Cl₃(L)] complexes has been structurally characterized. The trans influence of the amide nitrogen considerably lengthens the Re–N bond lying trans to the imido group. The triply bonded ReN–C moiety is linear.     

Synthesis and DFT calculations of oxido and phenylimido-rhenium(V) complexes incorporating the N,O donor ligand 2-[(2-hydroxyethylimino)methyl]phenol

The reactions of equimolar amounts of trans-[ReOC1₃(PPh₃)₂] or trans-[Re(NPh)(PPh₃)₂Cl₃] with a Schiff base formed by condensation of 2-hydroxy-4-methoxybenzaldehyde and ethanolamine (H₂L) result in the formation of cis-[ReO(HL)PPh₃Cl₂] (1a) and trans-[Re(NPh)(HL)(PPh₃)Cl₂] (2b), respectively, in good yields. 1a and 2b have been characterized by a range of spectroscopic and analytical techniques. The X-ray crystal structures of 1a and 2b reveal that 1a is an octahedral cis-Cl,Cl oxorhenium(V) complex, while 2b is a trans-Cl,Cl phenylimidorhenium(V) complex. The complexes are weakly emissive at room temperature with quantum yields of 10^?4. Density functional theory calculations of the electronic properties of the complexes were performed and are in agreement with the experimental results. The complexes display quasi-reversible Re(V)/Re(VI) redox couples in acetonitrile. There is reasonable agreement between the experimental and calculated redox potentials of 1a and 2b.     

A comparative study of neighbouring group effects on the isomerization of imines in platinum-imine complexes by 1H, 13C, 31P and 195Pt NMR spectroscopy

¹⁹⁵Pt-, ³¹P-, ¹³C- and ¹H-chemical shifts are reported for the first time for complexes of the type trans-[PtCl₂ (η²-C₂H₄) (imine)], I, trans-[PtCl₂ (η²-C₂H₄) (amine)] II, and trans-[PtCl₂(PR′₃) (imine)] III (the imine ligand being derived from cyclopropyl-2-thienylketone and primary amines; PR′₃ = PBuⁿ₃ and PPh₃; amine; the amine ligand obtained by the reduction of the appropriate imine). The use of multinuclear spectroscopy provides strong evidence for E-Z isomerization of imine ligands coordinated to platinum (II) of the type trans-[PtCl₂ (η²-C₂H₄)(imine)]. Tertiary phosphine ligands trans to imine ligand (III) are not strongly labilizing groups, in contrast to η²-C₂H₄, which shows a strong labilizing effect. The effect of neighbouring groups on E-Z isomerization indicates that increase of the bulky substituents close to the imino group tends to increase the rate of isomerization, and increasing the degree of substitution on the imine carbon atoms slows the rate of isomerization. Furthermore, addition of a trace of amine will catalyze the E-Z isomerization. Also, isomerization takes place in the liquid state to give one isomer during the coordination with platinum.     

Rhenium(I), (III) and (V) complexes of tridentate ONX (X = O,N, S)-donor Schiff bases

The reactions of the potentially tridentate Schiff bases 2-[(2-hydroxyphenyl)iminomethyl]phenol (H₂ono) and 2-(2-aminobenzylideneimino)phenol (H₃onn) with trans-[ReOBr₃(PPh₃)₂] were studied, and the complexes [Re^IIIBr(PPh₃)₂(ono)] (1) and [Re^VBr(PPh₃)₂(onn)]Br (2) were isolated. In 1ono acts as a dianionic tridentate ligand, and in 2onn is coordinated as a tridentate trianionic imido-imino-phenolate. The complex [Re^I(CO)₃(ons)(Hno)] was isolated from the reaction of [Re(CO)₅Br] with 2-[(2-methylthio)benzylideneimino]phenol (Hons; Hno = 2-aminophenol), with ons coordinated as a bidentate chelate with a free SCH₃ group. These complexes were characterized by X-ray crystallography, NMR and IR spectroscopy.     

[ReIII(thiourea-S)6]Cl3 · 4 H2O and [ReIII(N-methylthiourea-S)6]Cl3 as Precursors to other ReIII Complexes: a Kinetic Study in Aqueous Media. Crystal Structure of [ReIII(N-methylthiourea-S)6](PF6)3 · H2O

Capability of [Re^III(tu-S)₆]Cl₃, where tu = thiourea, as a precursor to other Re^III complexes by ligand substitution in aqueous medium is studied. For the decomposition of [Re(tu-S)₆]Cl₃, experiments suggest pseudo first order kinetics and observed rate constants vary from 1.3 × 10^–2 to 9.6 × 10^–2 min^–1 in the pH range 2.80–5.04. Experiments in presence of incoming ligand (ethylendiaminetetraacetic acid or diethylentriaminepentaacetic acid) show that ligand substitution is significantly slower than decomposition of the precursor, even when pH and temperature are modified. Similar results were obtained working with [Re^III(Metu-S)₆]Cl₃, where Metu = N-methylthiourea. Molecular structure of [Re^III(Metu-S)₆](PF₆)₃ · H₂O was determined by single crystal X-ray diffractometry. The coordination polyhedron around the Re ion is a distorted octahedron. The six methylthiourea ligands are bonded to the metal through the sulfur atoms [bond lengths range from 2.409(2) to 2.451(2) Å].     

Synthesis and Reactivity of Structurally Analogous Phenylimido and Oxo Complexes of Rhenium(V) with N,N‐Dialkyl‐N′‐benzoylthioureas

[ReOCl₃(PPh₃)₂] and [Re(NPh)Br₃(PPh₃)₂] react at room temperature with equivalent amounts of N,N‐dialkyl‐N′‐benzoylthioureas (HR¹R²btu) in CH₂Cl₂ under formation of the rhenium(V) complexes [ReOCl₂(R¹R¹btu)(PPh₃)] and [Re(NPh)Br₂(R¹R²btu)(PPh₃)], respectively. The products are structurally analogous with the oxygen atoms of the benzoylthioureas binding in trans positions to the oxo or phenylimido ligands. Prolonged reaction times result in the reduction of the oxo compound by the released PPh₃ and the formation of rhenium(III) complexes of the composition [ReCl₂(PPh₃)₂(R¹R²btu)], while such a second reaction path is excluded for the phenylimido compound. Phenylimido species with more than one N,N‐dialkyl‐N′‐benzoylthioureato ligand could not be isolated, even when a large excess of HR¹R²btu was used during the reaction.     

Efficient Olefin Epoxidation by Robust Re4 Cluster‐Supported MnIII Complexes with Peracids: Evidence of Simultaneous Operation of Multiple Active Oxidant Species,MnVO,MnIVO,and MnIII?OOC(O)R

Two new tetranuclear chalcocyanide cluster complexes, [{Mn(saloph)H₂O}₄Re₄Q₄(CN)₁₂]?4 CH₃OH? 8 H₂O (saloph=N,N′‐o‐phenylenebis(salicylidenaminato), Q=Se ( 1 ‐Se), Te ( 2 ‐Te)), have been synthesized by the diffusion of a methanolic solution of [PPh₄]₄[Re₄Q₄(CN)₁₂] into a methanolic solution of [Mn(saloph)]⁺. The structure of 2 ‐Te has been determined by X‐ray crystallography. These rhenium cluster‐supported [Mn^III(saloph)] complexes have been found to efficiently catalyze a wide range of olefin epoxidations under mild experimental conditions in the presence of meta‐chloroperbenzoic acid (mCPBA). Olefin epoxidation by these catalysts is proposed to involve the multiple active oxidants Mn^V?O, Mn^IV?O, and Mn^III? OOC(O)R. Evidence in support of this interpretation has been derived from reactivity and Hammett studies, H₂¹⁸O‐exchange experiments, and the use of peroxyphenylacetic acid as a mechanistic probe. Moreover, it has been observed that the participation of Mn^V?O, Mn^IV?O, and Mn^III? OOC(O)R can be controlled by changing the substrate concentration. This mechanism provides the greatest congruity with related oxidation reactions that employ certain Mn complexes as catalysts.     

Rhodium Complexes Containing O‐Bonded NHxMe2−xCHO (x=0, 1, 2): X‐Ray Structure of [Rh(PPh3)3(OCHNHMe)]ClO4

Displacement of norbornadiene (nbd; bicyclo[2.2.1]hepta‐2,5‐diene) from [Rh(PPh₃)₂(nbd)]ClO₄ by hydrogenation in the presence of PPh₃ and formamide or Me‐substituted derivatives, results in the formation of O‐bonded formamide complexes [Rh(PPh₃)₃(OCHNH_xMe_2−x)]ClO₄ (x=0, 1, 2) rather than N‐bonded derivatives. These have been characterised by spectroscopic measurements and, in the case of [Rh(PPh₃)₃(OCHNHMe)]ClO₄, by X‐ray crystallography. All undergo oxidative addition with H₂, and the rates of ligand exchange in the Rh^I and Rh^III complexes have been determined by magnetisation‐transfer measurements.     

Synthese von Nitrenkomplexen mit N-Trimethylsilylanilin. II. Charakterisierung und Kristallstruktur der Rhenium(V)-phenylnitren-Komplexe mer-[Re(NPh)Cl3(NH2Ph)(Ph3P)] und trans-[Re(NPh)(OMe)Cl2(Ph3P)2]

Synthesis of Phenylnitrene Complexes with N-Trimethylsilylaniline. II. Characterization and Crystal Structure of the Rhenium(V) Complexes mer-[Re(NPh)Cl₃(NH₂Ph)(Ph₃P)] and trans-[Re(NPh)(OMe)Cl₂(Ph₃P)₂] Reaction of [ReOCl₃(Ph₃P)₂] with N-trimethylsilylaniline yields mer-[Re(NPh)Cl₃(Ph₃P)₂], which reacts under air with excess of N-trimethylsilylaniline to form [Re(NPh)Cl₃ · (NH₂Ph)(Ph₃P)]. Crystallization from CH₂Cl₂/MeOH affords [Re(NPh)(OMe)Cl₂(Ph₃P)₂] as an additional product. [Re(NPh)Cl₃(NH₂Ph)(Ph₃P)] crystallizes in the monoclinic space group P2₁/n with a = 1 192.3(3); b = 1 918.9(3); c = 1 266.3(3) pm; β = 101.71(1)°; Z = 4. The rhenium atom has a distorted octahedral environment with the Cl atoms in meridional positions. The phenyl nitrene ligand is coordinated with an almost linear arrangement Re? N1? C40 = 166.8(6)° and with a bond distance Re?N = 170.5(6) pm. [Re(NPh)(OMe)Cl₂(Ph₃P)₂] · 1/2CH₂Cl₂ crystallizes in the triclinic space group P1 : a = 1 103.1(4); b = 1 227.9(4); c = 1 711.3(5) pm; α = 70.48(3)°; β = 72.71(3)°; γ = 80.03(3)°; Z = 2. The rhenium atom exhibits a distorted octahedral coordination with the Cl atoms and the phosphine ligands in trans positions. As a consequence of the competition of the nitrene ligand and the trans-coordinated methoxy group the Re?;N bond length is slightly lengthened to 173.2(7) pm, while the Re? O bond length of 193.4(6) pm is short. The bond angles Re? N? C70 and Re? O? C80 are 173.3(7)° and 139.1(7)°, respectively.