Study of aromatic nucleophilic substitution with amines on nitrothiophenes in room-temperature ionic liquids: are the different effects on the behavior of para-like and ortho-like isomers on going from conventional solvents to room-temperature ionic liquids related to solvation effects?

The kinetics of the nucleophilic aromatic substitution of some 2-L-5-nitrothiophenes (para-like isomers) with three different amines (pyrrolidine, piperidine, and morpholine) were studied in three room-temperature ionic liquids ([bmim][BF4], [bmim][PF6], and [bm(2)im][BF4], where bmim = 1-butyl-3-methylimidazolium and bm(2)im = 1-butyl-2,3-dimethylimidazolium). To calculate thermodynamic parameters, a useful instrument to gain information concerning reagent-solvent interactions, the reaction was carried out over the temperature range 293-313 K. The reaction occurs faster in ionic liquids than in conventional solvents (methanol, benzene), a dependence of rate constants on amine concentration similar to that observed in methanol, suggesting a parallel behavior. The above reaction also was studied with 2-bromo-3-nitrothiophene, an ortho-like derivative able to give peculiar intramolecular interactions in the transition state, which are strongly affected by the reaction medium.     

How ionic are room-temperature ionic liquids? An indicator of the physicochemical properties

Room-temperature ionic liquids (RTILs) are liquids consisting entirely of ions, and their important properties, e.g., negligible vapor pressure, are considered to result from the ionic nature. However, we do not know how ionic the RTILs are. The ionic nature of the RTILs is defined in this study as the molar conductivity ratio (Lambda(imp)/Lambda(NMR)), calculated from the molar conductivity measured by the electrochemical impedance method (Lambda(imp)) and that estimated by use of pulse-field-gradient spin-echo NMR ionic self-diffusion coefficients and the Nernst-Einstein relation (Lambda(NMR)). This ratio is compared with solvatochromic polarity scales: anionic donor ability (Lewis basicity), E(T)(30), hydrogen bond donor acidity (alpha), and dipolarity/polarizability (pi), as well as NMR chemical shifts. The Lambda(imp)/Lambda(NMR) well illustrates the degree of cation-anion aggregation in the RTILs at equilibrium, which can be explained by the effects of anionic donor and cationic acceptor abilities for the RTILs having different anionic and cationic backbone structures with fixed counterparts, and by the inductive and dispersive forces for the various alkyl chain lengths in the cations. As a measure of the electrostatic interaction of the RTILs, the effective ionic concentration (C(eff)), which is a dominant parameter for the electrostatic forces of the RTILs, was introduced as the product of Lambda(imp)/Lambda(NMR) and the molar concentration and was compared with some physical properties, such as reported normal boiling points and distillation rates, glass transition temperature, and viscosity. A decrease in C(eff) of the RTILs is well correlated with the normal boiling point and distillation rate, whereas the liquid-state dynamics is controlled by a subtle balance between the electrostatic and other intermolecular forces.     

Coordination of 1,10-phenanthroline and 2,2'-bipyridine to Li+ in different ionic liquids. How innocent are ionic liquids?

On the basis of (7)Li NMR measurements, we have made detailed studies on the influence of the ionic liquids [emim][NTf(2)], [emim][ClO(4)], and [emim][EtSO(4)] on the complexation of Li(+) by the bidentate N-donor ligands 2,2'-bipyridine (bipy) and 1,10-phenanthroline (phen). For each of the employed ionic liquids the NMR data implicate the formation of [Li(bipy)(2)](+) and [Li(phen)(2)](+), respectively. X-ray diffraction studies were performed to determine the coordination pattern in the solid state. In the case of [emim][ClO(4)] and [emim][EtSO(4)], crystal structures confirmed the NMR data, resulting in the complexes [Li(bipy)(2)ClO(4)] and [Li(phen)(2)EtSO(4)], respectively. On the contrary, the ionic liquid [emim][NTf(2)] generated the C(i) symmetric, dinuclear, supramolecular cluster [Li(bipy)(NTf(2))](2), where the individual Li(+) centers were found to be bridged by two [NTf(2)] anions. Density functional theory (DFT)-calculations lead to further information on the effect of stacking on the coordination geometry of the Li(+) centers.     

Combustible ionic liquids by design: is laboratory safety another ionic liquid myth?

The non-flammability of ionic liquids (ILs) is often highlighted as a safety advantage of ILs over volatile organic compounds (VOCs), but the fact that many ILs are not flammable themselves does not mean that they are safe to use near fire and/or heat sources; a large group of ILs (including commercially available ILs) are combustible due to the nature of their positive heats of formation, oxygen content, and decomposition products.     

Pressing matter: why are ionic liquids so viscous?

Room temperature ionic liquids are considered to have huge potential for practical applications such as batteries. However, their high viscosity presents a significant challenge to their use changing from niche to ubiquitous. The modelling and prediction of viscosity in ionic liquids is the subject of an ongoing debate involving two competing hypotheses: molecular and local mechanisms versus collective and long-range mechanisms. To distinguish between these two theories, we compared an ionic liquid with its uncharged, isoelectronic, isostructural molecular mimic. We measured the viscosity of the molecular mimic at high pressure to emulate the high densities in ionic liquids, which result from the Coulomb interactions in the latter. We were thus able to reveal that the relative contributions of coulombic compaction and the charge network interactions are of similar magnitude. We therefore suggest that the optimisation of the viscosity in room temperature ionic liquids must follow a dual approach.

We use an experimental approach to compare an ionic liquid with a molecular mimic, focusing on viscosities. Charge network and coulombic compaction contribute significantly to the high viscosity of ionic liquids; we discuss the implications on their design and optimisation.     

Why Is CO2 so soluble in imidazolium-based ionic liquids?

Experimental and molecular modeling studies are conducted to investigate the underlying mechanisms for the high solubility of CO2 in imidazolium-based ionic liquids. CO2 absorption isotherms at 10, 25, and 50 degrees C are reported for six different ionic liquids formed by pairing three different anions with two cations that differ only in the nature of the "acidic" site at the 2-position on the imidazolium ring. Molecular dynamics simulations of these two cations paired with hexafluorophosphate in the pure state and mixed with CO2 are also described. Both the experimental and the simulation results indicate that the anion has the greatest impact on the solubility of CO2. Experimentally, it is found that the bis(trifluoromethylsulfonyl)imide anion has the greatest affinity for CO2, while there is little difference in CO2 solubility between ionic liquids having the tetrafluoroborate or hexafluorophosphate anion. The simulations show strong organization of CO2 about hexafluorophosphate anions, but only small differences in CO2 structure about the different cations. This is consistent with the experimental finding that, for a given anion, there are only small differences in CO2 solubility for the two cations. Computed and measured densities, partial molar volumes, and thermal expansion coefficients are also reported.     

Synthesis of polyamidines based on 1,4-dicyanobenzene and 4,4′-diaminodiphenyl oxide in ionic liquids

1,4-Dicyanobenzene and 4,4′-diaminodiphenyl oxide at 190–200°C in ionic liquids form polyamidines of different molecular weights, whose T _10% in air is in the range 250–270 °C.     

How polar are ionic liquids? Determination of the static dielectric constant of an imidazolium-based ionic liquid by microwave dielectric spectroscopy

In a pilot study of the dielectric constant of room-temperature ionic liquids, we use dielectric spectroscopy in the megahertz/gigahertz regime to determine the complex dielectric function of five 1-alkyl-3-methylimidazolium salts, from which the static dielectric constant epsilon is obtained by zero-frequency extrapolation. The results classify the salts as moderately polar solvents. The observed epsilon-values at 298.15 K fall between 15.2 and 8.8, and epsilon decreases with increasing chain length of the alkyl residue of the cation. The anion sequence is trifluoromethylsulfonate > tetrafluoroborate approximately tetrafluorophosphate. The results indicate markedly lower polarities than found by spectroscopy with polarity-sensitive solvatochromic dyes.     

Solvation of ionic liquids based on N-methyl-N-alkyl morpholinium cations in dimethylsulfoxide – volumetric and compressibility studies

The density and sound velocity of the solutions of ionic liquids based on N-alkyl-N-methyl-morpholinium cations, N-ethyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide, N-butyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide, N-methyl-N-octyl-morpholinium bis(trifluoromethanesulfonyl)imide and N-decyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide in dimethylsulfoxide were measured at T = (298.15 to 318.15) K and at atmospheric pressure. The apparent molar volume and apparent molar compressibility values were evaluated from density and sound velocity values and fitted to the Masson equation from which the partial molar volume and partial molar isentropic compressibility of the ILs at infinite dilution were also calculated at working temperatures. By using the density values, the limiting apparent molar expansibilities were estimated. The effect of the alkyl chain length of the ILs and experimental temperature on these thermodynamic properties is discussed. In addition, molecular dynamics simulations were used to interpret the measured properties in terms of interactions of ILs with solvent molecules. Both, volumetric measurements results and molecular dynamics simulations for ionic liquids in dimethylsulfoxide were compared and discussed with results obtained for the same IL in acetonitrile.     

A dispersive liquid–liquid microextraction based on a task-specific ionic liquid for enrichment of trace quantity of cadmium in water and food samples

In this work, a hydrophilic task-specific ionic liquid (TSIL) of 1-chloroethyl-3-methylimidazolium chloride functionalized with 8-hydroxyquinoline was used in a dispersive liquid–liquid microextraction method followed by flame atomic absorption spectrometry for the enrichment and determination of trace amounts of cadmium (Cd²⁺) ions. The simultaneous chelation and extraction of Cd²⁺ ions was carried out by the TSIL. Fine droplets of the water-immiscible TSIL containing target analyte were generated in situ by addition of an anion exchanger potassium hexafluorophosphate (KPF₆) salt to the sample tube. After phase separation by centrifugation for 4 min, the sedimented TSIL was diluted with acidified ethanol for measurement of Cd²⁺ content. Some significant parameters influence the preconcentration of Cd²⁺ ions such as sample pH, TSIL volume, amount of KPF₆, non-ionic surfactant and salt concentration were investigated. Under the optimal conditions, calibration curve was linear in the range of 5–250 µg L^?1 Cd²⁺ with correlation coefficient of 0.9975 and a detection limit of 0.55 µg L^?1. The relative standard deviation for six replicate measurements of 50 µg L^?1 Cd²⁺ was 1.5%. The method was successfully applied for the extraction and determination of Cd²⁺ ions in water and food samples.     

Luminescent organic–inorganic hybrid materials based on lanthanide containing ionic liquids and sylilated β-diketone

In this work, we report the luminescent organic–inorganic hybrid materials prepared by hydrolysis and condensation of sylilated β-diketone under acid conditions in the presence of carboxyl-functionalized ionic liquid in which Eu³⁺ ions are coordinated to the oxygen atoms of carboxylate groups from the ionic liquids. The obtained materials were characterized with FT-IR, TG and photoluminescence spectroscopy. FT-IR spectra imply that Eu³⁺ ions are still coordinated to the ionic liquid in the hybrid materials. Excitation and emission spectra demonstrate that the energy transfer occurs from the β-diketone molecules covalently bonded with silica to Eu³⁺ ions. The Eu³⁺ (⁵D₀) quantum efficiency value of the hybrid materials has been estimated based on the emission spectrum and the value of lifetime. A large value of ratio (16.44) between the intensities of the ⁵D₀→⁷F₂ and ⁵D₀→⁷F₁ transition and high value of ⁵D₀ quantum efficiency (51.01%) are obtained.     

Intercalation synthesis of functional hybrid materials based on layered simple hydroxide hosts and ionic liquid guests--a pathway towards multifunctional ionogels without a silica matrix?

Functional hybrid materials on the basis of inorganic hosts and ionic liquids (ILs) as guests hold promise for a virtually unlimited number of applications. In particular, the interaction and the combination of properties of a defined inorganic matrix and a specific IL could lead to synergistic effects in property selection and tuning. Such hybrid materials, generally termed ionogels, are thus an emerging topic in hybrid materials research. The current article addresses some of the recent developments and focuses on the question why silica is currently the dominating matrix used for (inorganic) ionogel fabrication. In comparison to silica, matrix materials such as layered simple hydroxides, layered double hydroxides, clay-type substances, magnetic or catalytically active solids, and many other compounds could be much more interesting because they themselves may carry useful functionalities, which could also be exploited for multifunctional hybrid materials synthesis. The current article combines experimental results with some arguments as to how new, advanced functional hybrid materials can be generated and which obstacles will need to be overcome to successfully achieve the synthesis of a desired target material.     

Liquids intermediate between "molecular" and "ionic" liquids: liquid ion pairs?

Ionic liquids comprised of tetradecyltrihexyl- and tetrabutyl-phosphonium cations paired with chloride or sulfonyl amide anions exhibit properties that reflect strong ion association, including comparatively low viscosity as well as a degree of volatility, and hence exemplify an interesting intermediate state between true ionic and true molecular liquids.     

Dispersive liquid–liquid microextraction based on ionic liquid in combination with high-performance liquid chromatography for the determination of bisphenol A in water

A method termed dispersive liquid–liquid microextraction (DLLME) coupled with high-performance liquid chromatography-variable wavelength detection (HPLC-VWD) was developed. DLLME-HPLC-VWD is a method for determination of bisphenol A (BPA) in water samples. In this microextraction method, several parameters such as extraction solvent volume, sample volume, disperser solvent, ionic strength, pH, and disperser volume were optimised with the aid of interactive orthogonal array and a mixed level experiment design. First, an orthogonal array design was used to screen the significant variables for the optimisation. Second, the significant factors were optimised by using a mixed level experiment. Under the optimised extraction conditions (extraction solvent: ionic liquid [C₆MIM][PF₆], 60 µL; dispersive solvent: methanol, 0.4 mL; and pH = 4.0), the performance of the established method was evaluated. The response linearity of the method was observed in a range of 0.002–1.0 mg L^?1 (three orders of magnitude) with correlation coefficient (R ²) of 0.9999. The repeatability of this method was 4.2–5.3% for three different BPA levels and the enrichment factors were above 180. The extraction recovery was about 50% for the three different concentrations with 3.4–6.4% of RSD. Limit of detection of the method was 0.40 µg L^?1 at a signal-to-noise ratio of 3. In addition, the relative recovery of sample of Songhua River, tap water and barrel-drain water at different spiked concentration levels was ranged 95.8–103.0%, 92.6–98.6% and 87.2–95.3%, respectively. Compared with other extraction technologies, there have been the following advantages of quick, easy operation, and time-saving for the present method.     

Pesticide extraction from table grapes and plums using ionic liquid based dispersive liquid–liquid microextraction

Room temperature ionic liquids (RTILs) have been used as extraction solvents in dispersive liquid–liquid microextraction (DLLME) for the determination of eight multi-class pesticides (i.e. thiophanate-methyl, carbofuran, carbaryl, tebuconazole, iprodione, oxyfluorfen, hexythiazox, and fenazaquin) in table grapes and plums. The developed method involves the combination of DLLME and high-performance liquid chromatography with diode array detection. Samples were first homogenized and extracted with acetonitrile. After evaporation and reconstitution of the extract in water containing sodium chloride, a quick DLLME procedure that used the ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) and methanol was developed. The RTIL dissolved in a very small volume of acetonitrile was directed injected in the chromatographic system. The comparison between the calibration curves obtained from standards and from spiked sample extracts (matrix-matched calibration) showed the existence of a strong matrix effect for most of the analyzed pesticides. A recovery study was also developed with five consecutive extractions of the two types of fruits spiked at three concentration levels. Mean recovery values were in the range of 72–100% for table grapes and 66–105% for plum samples (except for thiophanate-methyl and carbofuran, which were 64–75% and 58–66%, respectively). Limits of detection (LODs) were in the range 0.651–5.44 μg/kg for table grapes and 0.902–6.33 μg/kg for plums, representing LODs below the maximum residue limits (MRLs) established by the European Union in these fruits. The potential of the method was demonstrated by analyzing 12 commercial fruit samples (six of each type).     

Purification or contamination? The effect of sorbents on ionic liquids

Commonly used for purification, alumina and silica are found to contaminate ionic liquids with particles; these particles cannot be removed easily and can have a non-negligible impact on the electrochemical, spectroscopic and physical properties of an ionic liquid, including its nucleation and crystallisation kinetics.     

Hydrophobic Brønsted acid-base ionic liquids based on PAMAM dendrimers with high proton conductivity and blue photoluminescence

A simple strategy has been described to synthesize a novel hydrophobic Br?nsted acid-base ionic liquid based on a PAMAM dendrimer. The resulting ionic liquid is highly fluorescent and proton conductive with great potential for sensors and nonaqueous proton-conducting electrolytes.     

Thermochemistry of ammonium based ionic liquids: Tetra-alkyl ammonium nitrates – Experiments and computations

In this work data of the molar enthalpies of formation of the ionic liquids [R₄N][NO₃] were measured by means of combustion calorimetry. The thermal behavior of [R₄N][NO₃] was studied using differential scanning calorimetry. First-principles calculations of the enthalpy of formation in the gaseous phase have been performed for the ionic species using the G3(MP2) theory. Enthalpies of formation of aqueous tetra-alkyl ammonium ions ${\mathrm{\Delta }}_{\text{f}}{H}_{\text{m}}^{°}$ ([R₄N]⁺_(aq)) derived in this work are useful for prediction thermochemical properties of the ammonium based ionic liquids.     

Physical–chemical properties of nickel analogs ionic liquid based on choline chloride

In this paper, a homogeneous, green analogs ionic liquid containing choline chloride and nickel chloride hexahydrate is formed. The structure of the analogs ionic liquid is preliminary investigated by Fourier transform infrared spectroscopy. It is shown that the nickel chloride hexahydrate bond via hydrogen bonds with choline chloride and urea. The physico-chemical properties of the analogs ionic liquid such as viscosity, conductivity, density, and thermal stability are measured as a function of temperature and composition. The thermal expansion coefficients (r), the molar Gibbs energy of activation (ΔG*) for viscous flow, the molar enthalpy of activation (ΔH*), and the molar entropy of activation (ΔS*) for viscous flow have been calculated. A straight-line equation is used to fit the density data while the Arrhenius equation is used to fit both viscosity and conductivity. Thermal stability of analogs ionic liquid was carried out from room temperature to 973.15 K. It indicates that analogs ionic liquid is stable from room temperature to 488.2 K.