The Synthesis of (±)-11-Deoxydaunomycinone via Regioselective Tandem Diels-Alder Reactions

The 2,5-dimethylidene-3,6-bis[(Z)-(2-nitrophenyl)sulfenylmethylidene]-7-oxabicyclo[2.2.1]heptane ( 13 ) can be used to generate polyfunctional and multicyclic molecules with high regio- and stereoselectivity via two successive Diels-Alder additions using two different dienophiles. This principle has been applied to the synthesis of (±)-11-deoxydaunomycinone ( 7 ), the aglycone of an important antitumor drug. The 2,3-didehydroanisole adds to 13 and gives the monoadduct 14 with high regioselectivity. No trace of bis-adduct is observed. The 1,4-epoxy-1,2,3,4-tetrahydro-5-methoxy-3-methylidene-2-[(Z)-(2-nitrophenyl)sulfenylmethylidene]anthracene ( 15 ) obtained on treating 14 with K₂CO₃ adds to methyl vinyl ketone to give [(1RS, 2SR, 5RS,12RS)-5,12-epoxy-1,2,3,4,5,12-hexahydro-7-methoxy-1-(2-nitrophenyl)sulfenyl-2-naphthacenyl]methyl ketone ( 16 ) with high regio- and stereoselectivity. The acid-catalyzed 7-oxanorbornadiene→phenol rearrangement of 16 is regioselective and gives (5-acetoxy-3,4-dihydro-7-methoxy-2-naphthacenyl) methyl ketone ( 20 ) which was transformed into (±)-7,11-dideoxydaunomycinone ((±)- 24 ), a known precursor of 7 .     

Iron powder and tin/tin chloride as new reducing agents of Meerwein arylation reaction with unexpected recycling to anilines

Abstract

Simple and rapid route for Meerwein arylation reaction using iron powder or a mixture of tin/tin chloride has been developed. In the presence of iron powder, different aryl diazonium salts reacted with methyl vinyl ketone, acrylates, and isopropenyl acetate. Production of oximes was detected as the main product with acrylates or in a mixture with β-aryl methyl ketones in the case of methyl vinyl ketone. The in situ produced HNO₂ from an excess of NaNO₂/HCl was trapped by alkyl aryl radical to form oximes in the E configuration form. The presence of tin/tin chloride mixture in the reaction of the aryl diazonium salts with methyl vinyl ketone produced Michael products along with β-aryl methyl ketones. The predicted α-aryl methyl ketones from the reaction of isopropenyl acetate with the diazotized anilines were obtained using iron or tin/tin chloride mixture.     

Michael additions to acrylonitrile,methyl acrylate and methyl vinyl ketone to Nb-benzylidenetryptophan methyl ester

Michael addition to methyl acrylate and methyl vinyl ketone of N_b-benzylidene-L-tryptophan methyl ester 1 gave 2-(3-indolylmethyl)glutamic dimethyl ester 2a and α-(3-oxobutyl)tryptophan methyl ester 2b respectively. Addition to acrylonitrile of 1 yielded α,N_a-dicyanoethyltryptophan methyl ester 3 .     

THE BAYLIS—HILLMAN REACTION: TiCl4 MEDIATED COUPLING OF ALKYL VINYL KETONES WITH α-KETO ESTERS AND ALDEHYDES

TiCl₄ mediated coupling of alkyl vinyl ketones with α-keto esters and aldehydes provides respectively 2-aryl-2-hydroxy-3-methylene-4-oxoalkanoates and (Z)-keto allyl chlorides in 1 h time at room temperature. Similar coupling of trifluoromethyl phenyl ketone with methyl vinyl ketone produces 1,1,1-trifluoro-2-hydroxy-2-phenyl-3-methylenepentan-4-one.     

Dinitramide and its salts

Dinitramide readily adds to acrolein, methyl vinyl ketone, and phenyl vinyl ketone, but not to acrylonitrile or methyl acrylate. Treatment of dinitro compounds (O₂N)₂NCH₂CH₂COR (R = H, Me, Ph, OMe) with bases results in dinitramide salts in 66–83 % yields.For part 1, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1264–1266, July, 1994.     

1,2-Versus 1,4-reduction of α,β-unsaturated carbonyl compounds in the gas phase

The regioselectivity involved in the gas-phase hydride reduction of α,β-unsaturated carbonyl compounds by pentacoordinate silicon hydride ions is investigated. The kinetics and product distributions of the reactions of acrolein, methyl vinyl ketone and cyclohex-2-enone with monoalkoxysiliconate ions of the general composition RSiH₃(OR′)^? were examined with the flowing afterglow–triple quadrupole technique. All three substrates react by hydride transfer and by formation of a siliconate adduct in which hydride reduction of the organic reactant has occurred. The structures of these adducts and the hydride transfer products were identified by various tandem mass spectrometric protocols, including analysis of competitive collision-induced dissociation (CID) reactions and comparisons of CID spectra obtained from reference ions with known structures. 1,4-Reduction forming an enolate ion product is found to be the dominant or exclusive process with all three substrates, i.e. acrolein (70 ± 5%), methyl vinyl ketone (72 ± 5%) and cyclohex-2-enone (100%). Comparisons are made between these gas-phase results and the regioselectivity reported for analogous condensed-phase reactions. The observed behavior is discussed in terms of the reaction thermochemistry.     

Diels-alder stereo- and regioselectivity controlled by remote substituents and solvent. Cycloadditions of 1-(dimethoxymethyl)-2,3-bis(methylene)-7-oxabicyclo[2.2.1]Heptane

The regioselectivity of the EtAlCl-catalyzed addition of methyl vinyl ketone to the title diene can be reversed by solvent modification.     

Copolymerization of propylene and methyl vinyl ketone with metallocene catalysts: Synthesis,properties, and thermal and photooxidation of modified polypropylene

The copolymers of propylene and methyl vinyl ketone are synthesized at 60°С by copolymerization in the propylene bulk in the presence of the polymethylaluminoxane-activated metallocene catalysts, namely, the isospecific С₂-symmetric metallocene catalyst rac-Me₂Si(2-Me-4-PhInd)₂ZrCl₂ and the syndiospecific Сs-symmetric metallocene catalyst Ph₂ССpFluZrCl₂, and characterized. It is shown that a noticeable insertion of methyl vinyl ketone into a polypropylene chain is possible during copolymerization initiated by the syndiospecific catalytic system, whereas in the case of the isospecific system, the insertion of methyl vinyl ketone is hindered. The thermal oxidation of the resulting polymers is studied. With the use of chemiluminescence, the accumulation of peroxy macroradicals under the action of daylight in samples based on isotactic and syndiotactic polypropylene is detected. It is found that even a low (0.2 mol %) content of methyl vinyl ketone endows polypropylene with the capability to undergo rapid and controlled degradation under natural conditions.     

Synthetic transformations of higher terpenoids: XXXII. Synthesis of 16-alkenyl-substituted labdatrienes by oxidative coupling of methyl phlomisoate with alkenes

Reactions of methyl phlomisoate with methyl acrylate, phenyl acrylate, methyl vinyl ketone, phenyl vinyl ketone, or N-substituted acrylamides catalyzed by Pd(OAc)₂ in the presence of Cu(OAc)₂, p-benzoquinone in the mixture of propionic acid and acetonitrile proceed regio- and stereoselectively with the formation of (E)-16-vinyl labdatrienoates. The oxidative coupling under these conditions of the methyl phlomisoate with styrene results in a mixture of 15,16-distyryl-, 16-styryl-, and 16-(1-phenylvinyl)-derivatives of furanolabdanoid.     

Combined Experimental and Computational Investigations of Rhodium‐Catalysed CH Functionalisation of Pyrazoles with Alkenes

Detailed experimental and computational studies have been carried out on the oxidative coupling of the alkenes C₂H₃Y (Y=CO₂Me ( a ), Ph ( b ), C(O)Me ( c )) with 3‐aryl‐5‐R‐pyrazoles (R=Me ( 1 a ), Ph ( 1 b ), CF₃ ( 1 c )) using a [Rh(MeCN)₃Cp*][PF₆]₂/Cu(OAc)₂ ? H₂O catalyst system. In the reaction of methyl acrylate with 1 a , up to five products ( 2 aa – 6 aa ) were formed, including the trans monovinyl product, either complexed within a novel Cu^I dimer ( 2 aa ) or as the free species ( 3 aa ), and a divinyl species ( 6 aa ); both 3 aa and 6 aa underwent cyclisation by an aza‐Michael reaction to give fused heterocycles 4 aa and 5 aa , respectively. With styrene, only trans mono‐ and divinylation products were observed, whereas with methyl vinyl ketone, a stronger Michael acceptor, only cyclised oxidative coupling products were formed. Density functional theory calculations were performed to characterise the different migratory insertion and β‐H transfer steps implicated in the reactions of 1 a with methyl acrylate and styrene. The calculations showed a clear kinetic preference for 2,1‐insertion and the formation of trans vinyl products, consistent with the experimental results.     

Multifunktionellebis-(trifluormethyl)-substituierte Synthesezwischenstufen aus 4,4-Bis-(trifluormethyl)-1-oxa-3-azabuta-1,3-dienen viaBaylis-Hillman Reaktion

Summary TheBaylis-Hillman reaction of 4,4-bis-(trifluoromethyl)-1-oxa-3-azabuta-1,3-dienes with acrolein, methyl vinyl ketone, ethyl vinyl ketone, acrylonitrile, ethyl acrylate, andn-butyl acrylate provides useful multifunctional partial fluorinated building blocks in one step.

Prof. Dr. Rolf Huisgen zum 75. Geburtstag gewidmet     

Chemistry of o-Benzoquinones and Masked o Benzoquinones VII.: Regioselective and Stereoselective Cycloadditions of 6, 7-Dipropyl- and 8, 9-Eipropyl-1, 4-Dioxaspiro[4.5] deca-6, 8-Di-En-2, 10-Dione with Monosubstituted Ethylenes

The cycloadditions of the titled two masked o-benzoquinones, 2 and 3 , with monosubstituted ethylenes including ethyl acrylate, styrene, ethyl vinyl ether and 1-hexene were studied. The reactions proceeded with high stereoselectivity and regioselectivity to give endo head-to-head adducts when ethyl acrylate, styrene and ethyl vinyl ether were used as addenda. In the case of 1-hexene, the reaction with 2 took place with high regioselectivity but low stereoselectivity to afford endo as well as exo head-to-head adducts while the reaction with 3 occurred with less regioselectivity to produce presumably all the eight possible isomers. The regiochemistry of the adducts were determined by the ¹H nmr analysis of their hydrolysis products, bicyclo[2,2,2]oct-5-en-2,3-diones 6 , and the subsequent photolysis products, 1,3-cyclohexadienes 7 . The stereochemistry was established by the study of the lanthanide induced shifts of compounds 6a-6f with Fu(fod)₃. The regioselectivity and stereoselectivity of these cycloaddition reactions were explained in terms of frontier molecular orbital theory and steric effect. The present study provides also a facile method to prepare regioselectively bicyclo[2, 2, 2]oct-5-en-2,3-diones (stereo-selectively also) and 1,3-cyclohexadienes from unsymmetric catechols via masked o-benzoquinones.     

Measurements of the kinetics of the OH‐initiated oxidation of methyl vinyl ketone and methacrolein

The mechanisms of the OH‐initiated oxidation of methyl vinyl ketone and methacrolein have been studied at 300 K and 100 Torr total pressure, using a turbulent flow technique coupled with laser‐induced fluorescence detection of the OH radical. The rate constants for the OH + methyl vinyl ketone and OH + methacrolein reactions were measured to be (1.78 ± 0.08) × 10^?11 and (3.22 ± 0.10) × 10^?11 cm³ molecule^?1 s^?1, respectively, and were found to be in excellent agreement with previous studies. In the presence of O₂ and NO, the OH radical propagation and the loss of OH through radical termination resulting from the production of methyl vinyl ketone‐ and methacrolein‐based alkyl nitrates were measured at 100 Torr total pressure and compared to the simulations of the kinetics of these reaction systems. The results of these experiments are consistent with an overall rate constant of (2.0 ± 1.3) × 10^?11 cm³ molecule^?1 s^?1 for both the methyl vinyl ketone‐based peroxy radical + NO and methacrolein‐based peroxy radical + NO reactions, each with branching ratios of 0.90 ± 0.10 for the bimolecular channel (oxidation of NO to NO₂) and 0.10 ± 0.10 for the termolecular channel (production of methyl vinyl ketone‐ and methacrolein‐based alkyl nitrates). © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 12–25, 2003     

Surface modification. II. Functionalization of solid surfaces with vinylic monomers

A new method to functionalize surfaces of solid substrates such as glass, silicon crystals, and silica microspheres with appropriate vinylic monomers, i.e., methyl vinyl ketone, methyl acrylate, methacrolein, and acrolein, is described. The surface modification process was performed through the following sequence of reactions: (a) derivatization of the surfaces with to-nitrile groups by interacting the substrates with SiCl₃(CH₂)₃CN; (b) subsequent reduction of the a)-nitrile groups with diborane to w-amine groups; (c) binding of the vinylic monomers to the surfaces via the to-amine groups. pK_1/2 of the surface primary amine groups, as determined by contact angle titration, was found to be 2–4 units lower than the pK_1/2 values of primary amine analogous in solution. Methyl vinyl ketone and methyl acrylate were covalently bound to the amine surfaces only under basic conditions via the Michael addition reaction. Methacrolein and acrolein were covalently bound to the amine surfaces under both acidic and basic conditions via two major reactions: the Michael addition reaction and Schiff base bond formation. The concentration of the aldehyde groups of the surfaces obtained by the reaction with methacrolein and acrolein was significantly higher than that obtained using the common, published method in which glutaraldehyde interacts with the amine surfaces.     

New Carbonyl Compounds in the High-Boiling Fraction of Lavender Oil. 3rd Communication

The occurrence of a series of new constituents which can be considered as Diels-Alder adducts of methyl vinyl ketone and ocimene (→1–4), myrcene (→ 9 , 10 ) or β-far-nesene ( → 11 , 12 ), respectively, was reported. Furthermore, the structures of four isomeric cyclohexene derivatives could be established as adducts 21–24 of (E, Z)- and (E, E)-1,3,5-undecatrience and methyl vinyl ketone. Another series of constituents having the norbornane skeleton represents adducts 25–32 , and 33–40 of methyl cyclopentadiene and 1-octen-3-one or methyl vinyl ketone, respectively. In accordance with Alder's endo-rule the endo-isomers are preponderant in the natural as well as in the synthetic mixtures. Most of these constituents could also be identified in a lavender absolute as well as in a freshly prepared hexane extract of lavender flowers (Lavandula officinalis CHAIX ).     

Regioselectivity of the Diels-Alder Additions of 2-Substituted 5,6 Dimethylidenenorbornanes and-bicyclo[2.2.2]octanes

The cycloadditions of methyl propynoate and methyl vinyl ketone to 5,6-dimethylidene-2-norbornanone ( 6 ) are para′-regioselective

1 “Para” (p) designs in this paper the 4, 9-disubstituted tricclo[6.2.1.0^{2, 7}] undecane- and 4, 9-disubsstituted tricycle[6.2.20^2,7] dodecane derivatives, “meta” (m) design the corresponding 4, 10-disubstituted compounds.

. A smaller para -regioselectivity is observed for the addition of methyl propynoate to 5,6-dimethylidene-2bicyclo[2.2.2]octanone ( 10 ). No regioselectivity is observed with 5,6-dimethylidene-2exo-norbornyl alcohol ( 3 ), acetate ( 5 ) and 5,6-dimethylidene-2exo-bicyclo[2.2.2]octanol ( 9 ). PMO arguments based on the shape of the HOMO's and subHOMO's of the dienes allow to rationalize these observations. Unpredictable para′- or ‘meta’regioselectivities are found for the Diels,-Alder additions of 5,6-dimethylidene-2endo-norbornyl alcohol ( 2 ), acetate ( 4 ) and 5,6-dimethylidene-2endo-bicyclo[2.2.2]octanol ( 8 ). The carbonyl group of β,γ unsaturated ketones such as 6 and 10 can act as an electron donating homoconjugated substituent. The n(CO) ? σ[C(1), C(2)] ? π[C(5), C(6)] hyperconjugative interaction can override the usual electron-withdrawing effect of this function.     

Investigations on regio‐ and stereoselectivities in cycloadditions involving α‐ (3‐pyridyl)‐N‐phenylnitrone: Development of an efficient route to novel nicotine analogs

Thermal reactions of hitherto α‐(3‐pyridyl)‐N‐phenylnitrone ( 1 ) with mono‐substituted electron‐rich and electron‐neutral dipolarophiles are regio‐, and stereo‐selective (exo‐selective), controlled by LUMO ‐ dipole ‐ HOMO‐ dipolarophile interaction, and furnish syn‐5‐substituted‐3‐(3‐pyridyl)‐isoxazolidines ( 5 ) in high yields. With electron deficient dipolarophiles such as acrylonitrile there is observed a loss of regioselectivity as well as stereoselectivity and the regioselectivity is reversed in reactions with methyl vinyl ketone and methyl acrylate, due to intervention of HOMO‐dipole ‐ LUMO‐dipolarophile interaction, affording 4‐substi‐tuted‐3‐(3‐pyridyl)‐isoxazolidines ( 7 ) as major products. Reactions of nitrone ( 1 ) with disubstituted dipolarophiles such as methyl methacrylate and ethyl coronate furnish methyl syn‐5‐methy‐3‐pyridyl‐1‐phenyl‐isoxazolidine‐5‐carboxylate ( 8 ) and ethyl anti‐5‐methy‐3‐pyridyl‐1‐phenyl‐isoxazolidine‐4‐carboxylate ( 10 ), respectively, in high yields. Reaction with N‐Phenylmaleimide affords novel isoxazolidino‐pyrro‐lidinediones bearing a 3‐pyridyl moiety ( 11, 12 ). A mechanistic rationalization of the obtained results in terms of electronic, steric and secondary interactions is proffered.     

Anionic polymerization of vinyl monomers with xanthates

The polymerization of vinyl monomers with various xanthates (potassium tert-butylxanthate, potassium benzylxanthate, zinc n-butylxanthate, etc.) were carried out at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, methyl vinyl ketone, and methyl methacrylate were found to undergo polymerization with potassium tert-butylxanthate; however, styrene, methyl acrylate, and acrylamide were not polymerized with this xanthate. In the anionic polymerization of methyl vinyl ketone with potassium tert-butylxanthate, the rate of the polymerization was found to be proportional to the catalyst concentration and to the square of the monomer concentration. The activation energy of methyl vinyl ketone polymerization was 2.9 kcal/mole. In the polymerization, the order of monomer reactivity was as follows: N-phenylmaleimide > methyl vinyl ketone > acrylonitrile > methyl methacrylate. The initiation ability of xanthates increased with increasing basicity of the alkoxide group and with decreasing electronegativity of the metal ion in the series, lithium, sodium, and potassium tert-butylxanthate. The relative effects of the aprotic polar solvents on the reactivity of potassium tert-butylxanthate was also determined as follows: diethylene glycol dimethyl ether > dimethylsulfoxide > hexamethylphosphoramide > dimethylformamide > tetrahydrofuran (for methyl vinyl ketone); dimethyl sulfoxide > hexamethylphosphoramide > dimethylformamide ? diethylene glycol dimethyl ether (for acrylonitrile).     

Zur Regioselektivität von Cycloadditionen photochemisch erzeugter Benzonitril-isopropylide. 51. Mitteilung über Photoreaktionen

On the regioselectivity of cycloaddition reactions of photochemically generated benzonitrile-isopropylides This paper deals with the physical and chemical differences of zwitterionic benzo-nitrile-isopropylides, which differ by a p-substituent in the phenyl ring (H, F, OCH₃; Scheme 2). These dipolar species (4–6) are produced by irradiation of the corresponding 2 H-azirines ( 1–3 ; Scheme 1) in a 2-methylpentane glass at ?185°. Their UV. spectra are reproduced in the Figure. The spectra of 4 and 5 are characterized by an ‘aromatic band’ at short wavelength, and a longer wavelength band at approximately 275 nm, which is considered to be characteristic of the nitrile-ylide system. The UV. spectrum of the methoxy derivative 6 , which shows a broad absorption at 260 nm, arises by an addition of the ‘nitrile-ylide band’ and the anisole band. The three dipolar species 4–6 do not show any significant differences in the regioselectivity of the cycloaddition with methyl α-methacrylate even though F and OCH₃ have quite different σ-constants (Scheme 1). The addition according to modus A is very much preferred (B/A = 0,076). – It seems, that the substituents F and OCH₃ do not affect the physical and chemical behaviour of the parent benzonitrile-isopropylide (4) . All three dipolar species 4–6 react regiospecifically according to modus A with methyl trifluoroacetate (Scheme 1). The regioselectivity is reduced in the cycloaddition of 4 with methyl propiolate and ethyl phenylpropiolate (B/A = 0,04 and 0,28, respectively). The reduced regioselectivity in the latter case may be attributed to a reduced polarity of the triple bond in the dipolarophile.     

Graft polymers: Chain transfer and branching

The vinyl monomers, methyl methacrylate, ethyl methacrylate, and methyl acrylate were polymerized in the presence of chlorinated rubber or poly(vinyl chloride) in homogeneous solution with benzoyl peroxide as catalyst. A graft polymer was formed by a chain-transfer reaction involving the growing polymer radicals to the backbone of chlorinated rubber or poly(vinyl chloride), in addition to homopolymer from the monomer. The homopolymer was isolated from the polymer mixture by fractional precipitation from methyl ethyl ketone solution with methanol as precipitant. The chain-transfer constants for the branching reactions were evaluated. The ratios k_p/(k_t)^1/2 for the grafting reactions were obtained by a correlation of chain-transfer constants with the extent of branching. The chain-transfer data were correlated on the basis of an extension of the Q–e scheme of Alfrey and Price to polymer–polymer transfer reactions. Specific effects due to the backbone are found to have considerable influence on the course of the chaintransfer reactions and k_p/(k_t)^1/2 of the grafting reactions.