Polyimide structure–property relationships. II. Polymers from isomeric diamines

An extensive study of the effects of stereoisomeric variations in aromatic polyimide structures on polyimide properties was conducted. The structural variations were incorporated into the polyimides through the use of two complete series of isomeric aromatic diamine monomers, the diaminodiphenylmethanes and the diaminobenzophenones, as well as several pairs of diamine isomers. The ability of the diamines to polymerize was related to the basicities, and thus reactivities, of the amino groups. Diamines with an amino group located ortho to the group connecting the two aromatic rings were successfully polymerized with dianhydrides for the first time to high molecular weight poly(amic acids). The stereoisomeric polyimides were characterized by determining the glass transition temperatures T_g, mechanical properties, and thermooxidative stabilities of thin films of the polymers. The polymers prepared from p-diamines were shown to have the highest softening points and thus, the most rigid molecular structures. Those synthesized from m-diamines had the lowest T_g values, inferring the most flexible molecular backbone. With limited exceptions, the use of diamines with ortho-oriented amine groups failed to improve the flexibility of the polyimides since their T_g values were usually as high as those of polymers made from p-diamines. Only slight differences in mechanical properties of the isomeric polyimide films were attributable to the variations in isomeric structure, except for those properties dependent upon T_g changes, such as elevated temperature mechanical properties. A study of the thermooxidative stability of the polyimides showed little difference between the polymers prepared from the diaminobenzophenones, but marked differences were observed between the individual members of the diaminodiphenylmethane-derived polyimides.     

In-situ direct polycondensation in polymer matrices. II. In-situ direct polycondensation in styrene–butadiene block copolymers

Direct polycondensation of 3-substituted-4-hydroxybenzoic acid was carried out in solutions of styrene-butadiene block copolymers (SBS) at room temperature in the presence of triphenylphosphine and hexachloroethane as an initiator for the direct polycondensation of these monomers. Solution casting after the direct polycondensation provided opaque films in which the aromatic polyester was finely dispersed within the matrix of SBS. Mechanical properties of these films were examined by tensile tests. A great improvement of tensile strength was achieved by the incorporation of phenyl substituent in the resulting polyester. In-situ direct polycondensation leads to the formation of new composites of rigid polymers and flexible polymers. © 1993 John Wiley & Sons, Inc.     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

Biodegradable polymers based on renewable resources. II. Synthesis and biodegradability of polyesters containing furan rings

A series of polyesters were synthesized by the bulk polycondensations of the respective combinations of two difuranic diesters, i.e., bis(5-(methoxycarbonyl)-2-furyl)methane ( 4a ) and 1,1-bis(5-(methoxycarbonyl)-2-furyl)ethane ( 4b ), with two 1,4 : 3,6-dianhydrohexitols [1,4 : 3,6-dianhydro-D -glucitol ( 1 ) and 1,4 : 3,6-dianhydro-D -mannitol ( 2 )], four aliphatic diols, and three oligo(ethylene glycol)s. The polycondensations were carried out at 220–230°C in the presence of titanium isopropoxide as a catalyst, giving polyesters having number average molecular weight up to 2.4 × 10⁴. These polyesters are soluble in a variety of solvents including chlorinated hydrocarbons, 1,4-dioxane, dimethyl sulfoxide, dimethylformamide, and sulfolane. Soil-burial tests along with enzymatic degradation experiments showed that these polyesters are potentially biodegradable. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2729–2737, 1997     

Novel organic–inorganic hybrid materials from renewable resources: Hydrosilylation of fatty acid derivatives

Novel hybrid organic–inorganic materials were prepared from 10‐undecenoyl triglyceride and methyl 3,4,5‐tris(10‐undecenoyloxy)benzoate via hydrosilylation. 1,4‐Bis(dimethylsilyl)benzene, tetrakis(dimethylsilyloxy)silane, and 2,4,6,8‐tetramethylcyclotetrasiloxane were used as crosslinkers. The hydrosilylation reaction was catalyzed by Karstedt's catalyst [Pt(0)–divinyltetramethyldisiloxane complex]. The networks were structurally characterized by Fourier transform infrared spectroscopy, ¹³C NMR, and ²⁹Si magic‐angle‐spinning NMR. The thermal properties of these hybrids were studied with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The obtained materials showed good transparency and promising properties for optical applications. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6295–6307, 2005     

Synthesis of carbon-carbon chain polymers by phase-transfer-catalyzed polycondensation of phenylacetonitrile with activated dichlorides

Two-phase polycondensation of phenylacetonitrile with α,α′-dichloro-p-xylene and other activated dichlorides in an aromatic solvent-aqueous sodium hydroxide system with various phase-transfer catalysts produced carbon-carbon chain polymers with inherent viscosities up to 0.6 dL/g. Reaction variables of the polycondensation are discussed in some detail. These polymers had melting temperatures below 220°C and were soluble in tetrahydrofuran and polar aprotic solvents that included dimethylformamide and dimethyl sulfoxide.     

Polymers from a levopimaric acid–acrylonitrile Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylonitrile was efficiently prepared from resin acids. Excellent addition reaction yields (ca. 95%) were obtained. The adduct was converted into polyamides by polycondensation with diamines. When the same adduct was subjected to a dehydrodecarboxylation reaction, a novel ketone dinitrile derivative was obtained. This trifunctional product was also converted into polyamides by polycondensation with diamines. When the ketone dinitrile was hydrolyzed in the presence of alkalies and the reaction product was chlorinated, a ketone diacid chloride was obtained. A polyester was synthesized by the polycondensation of the diacid chloride with a diol. The structures of the Diels–Alder adduct, ketone dinitrile derivative, ketone diacid chloride, and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyamides and the polyester were low‐molecular‐weight polymers soluble in polar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were fairly thermostable substances, except the polyester, which appeared to be a substance with good thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6308–6322, 2005     

Synthesis of silylene–propenylene oligomers via catalytic polycondensation of diallyldiorganosilanes

Acyclic diene polycondensation (ADP) of diallyldiorganosilanes (CH₂CHCH₂)₂SiR₂ (where R = Me, Ph), in the presence of various ruthenium and rhodium complexes, led predominantly to linear silylene–propenylene oligomers. Ruthenium catalysts (e.g. RuCl₂(PPh₃)₃, RuHCl(CO)(PPh₃)₃, and RuCl(SiMe₃)(CO)(PPh₃)₂) were found to be more efficient than the rhodium ones. The reaction proceeds via preliminary catalytic isomerization of allylsilane to silyl-1-propenes followed by their oligococondensation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3299–3304, 1997     

Polymers from a levopimaric acid–acrylic acid Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylic acid was efficiently prepared from resin acids. When the adduct was subjected to a dehydrodecarboxylation reaction, a ketone diacid derivative was obtained. New ketone type linear polymers were synthesized by the advanced dehyrodecarboxylation, a nonconventional polycondensation reaction, of both the above in presence of sulfonic catalysts. The polyketones turned out to be excellent tackifiers in adhesive formulae. The ketone polymers were condensed with diamines to give crosslinked polyazomethines. The structures of the monomers and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyketones and polyazomethines were low‐molecular‐weight polymers, soluble in some polar and nonpolar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were substances with good thermal stability, except the polyazomethine synthesized by the condensation of polyketone with an aromatic diamine, which appeared to be a substance with high thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5979–5990, 2007     

Processable heat-resistant polymers. XI. Synthesis and characterization of unsaturated polyamideimides

Polycondensation of the diacid chloride of 2-(3-carboxy vinyl)phenyl-1,3-dioxoisoindoline-5-carboxylic acid with m-phenylenediamine and the diacid chloride of 2-(4-carboxy phenyl)-1,3-dioxoisoindoline-5-carboxylic acid with 1,5-bis(3-aminophenyl)1,4-pentadien-3-one was carried out in polar solvents to produce new unsaturated polyamide–imides. The solution and the thermal, electrical, and a few other properties of the polymers were studies. The polymers were soluble in highly polar solvents. The solubility parameter of the polymers was calculated from the Small's group contribution. The polymers were fairly thermostable and underwent crosslinking creaction when heated, preferably in the presence of a suitable catalyst. The crosslinked polymers were in soluble even in highly polar solvents and possessed higher thermal stability. The swelling behavior of the polymers was studied and the molecular weight between two consecutive crosslinks was determined. X-ray diffraction and the dielectric properties of the polymers and their crosslinked products were also studied.     

Polymers from multifunctional isocyanates. II. Synthesis and polyaddition reactions of novel aliphatic diisocyanatoesters

Trimethylsiloxyalkyl and -aryl isocyanates were reacted with alkanedioic acid dichlorides (oxalyl-, adipoyl-, suberoyl dichloride) or isocyanatoalkanoyl chlorides (3-isocyanatopropanoyl-, 6-isocyanatohexanoyl chloride) to give liquid low viscous diisocyanatoesters and -diesters in high yield. From these and 1,4-butanediol, polyurethanes were made having a regular sequence of ester and urethane groups. The properties of the polymers, especially their thermal stability, are discussed with respect to their structure. They are mostly crystalline materials (mp 100–240°C). Thermogravimetry data indicate that polyurethanes based on diisocyanatoalkyl oxalates decompose 50–80°C lower than those based on other acids.     

Polyimide structure–property relationships. I. Polymers from fluorene-derived diamines

A series of fluorene and fluorenone diamines were polymerized with two aromatic dianhydrides, and the resulting polyamic acids were cyclodehydrated to aromatic polyimides. A study of the mechanical properties of the polyimide films disclosed they are among the stiffest reported to date, with an excellent retention of rigidity at elevated temperatures. Comparisons of the tensile properties and glass transition temperatures of the fluorene-derived polymer films with those from the corresponding open-chain polyimide films established that the unusual rigidity, especially at elevated temperatures, was in large part due to the contribution of the bulky, tricyclic fluorene (one) moieties in the polymer structures.     

Synthesis of polyesters from 1,3-adamantanedicarboxylic acid by low-temperature polycondensation

Conclusions The optimum conditions were found for obtaining the polyester from the acid chloride of 1,3-adamantanedicarboxylic acid and phenolphthalein.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2098–2100, September, 1972.     

Development of novel phosphorus‐containing epoxy resins from renewable resources

Novel biobased epoxy resins were prepared from two fatty acid derivatives; epoxidized 10‐undecenoyl triglyceride and epoxidized methyl 3,4,5‐tris(10‐undecenoyloxy)benzoate, with 4,4′‐diaminodiphenylmethane as a crosslinking agent. The flame retardancy of these epoxy resins was improved by the addition of 10‐[2′, 5′‐bis(9‐oxiranyl‐nonayloxy)phenyl]‐9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide and by crosslinking with a phosphorus‐containing curing agent, bis(m‐aminophenyl)methylphosphine oxide. The thermal, thermomechanical, and flame‐retardant properties of the cured materials were measured with differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, and the limiting oxygen index. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6717–6727, 2006     

Synthesis of porphyrin‐embedded dendronized polymers by Suzuki polycondensation

Porphyrin‐embedded high molecular weight dendronized polymers up to fourth generation have been synthesized by Suzuki polycondensation of Fréchet‐type dendritic dibromo macromonomers and porphyrin diboronic pinacol ester. Higher generation lateral dendritic wedges not only endow the dendronized polymers with good solubility in commonly used organic solvents, but also prevent planar porphyrins and conjugated polymer backbones from aggregating by their “site isolation” effect. This type of porphyrin‐embedded dendronized polymers can be used as saturated red light‐emitting materials. With the increase of the generation of the lateral dendrons, the quantum yields of the dendronized polymers also gradually increased. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4030–4037, 2008     

Synthesis and Optical Properties of Group 14 Element–Thienyl Polymers

The syntheses of several types of polymers containing silicon, germanium and tin in the main chain are described. Optical studies show that they exhibit absorption in the far-ultraviolet region of the spectrum (200–400 nm). Electrical studies show that these polymers behave as insulators. Preliminary studies indicate, that depending on the chemical structure of the backbone, it is possible to dope some of the polymers via partial oxidation in solution. © 1997 John Wiley & Sons, Ltd.     

Synthesis of ordered polymer by direct polycondensation. VIII. Ordered polymer from two nonsymmetric monomers

The ordered (-aacdbbdc-) polymer was prepared by the direct polycondensation of a pair of symmetric monomers (XabX), 4,4′-(oxydi-p-phenylene)dibutanoic acid (XaaX) and 2-methoxyisophthalic acid (XbbX), with a nonsymmetric monomer (YcdY), 4-aminobenzhydrazide, using the condensing agent diphenyl (2,3-dihydro-2-thioxo-3-benzoxazolyl)phosphonate ( 1 ). The polymerization was carried out by a one-pot procedure, that is, mixing the dicarboxylic acids, condensing agent 1 and triethylamine in NMP for 2 h at room temperature, followed by the addition of 4-aminobenzhydrazide. This polymerization proceeded smoothly, yielding the ordered polymer with an inherent viscosity of 0.34 dL g⁻¹. The microstructure of the ordered polymer was confirmed by comparing the authentic ordered polymer in their ¹³C-NMR spectrum. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2309–2314, 1998     

Synthesis of hydrophilic polyamide from L-tartarate and diamines by active polycondensation

Dimethyl L-tartarate underwent polycondensation reaction with hexamethylenediamine in solutions at 30°C to form polyamide having pendent hydroxyl groups. Solvents had a great influence on polymer yields and diglyme, tetrahydrofuran (THF) or dimethylsulfoxide (DMSO) were favorable in respect of polymer yields. Solution viscosities of resulting polyamide were as low as 0.1 to 0.2. However, post-polycondensation of the precursor polyamide at solid phase yielded hydrophilic polyamide having film-forming ability. The polyamide decomposed at 210°C by heating.     

Polymers from renewable resources. XXI. Semi-interpenetrating polymer networks based on cardanol-formaldehyde-substituted aromatic compounds copolymerized resins and castor oil polyurethanes: Synthesis,structure, scanning electron microscopy and XRD

Substituted aromatic compounds incorporated–cardanol–formaldehyde novolac resins were synthesized by acid base catalyzed reactions. A number of improved high temperature stable interpenetrating polymer networks (semi-IPNs) were prepared by condensing novolac resins and polyurethanes prepared from castor oil and diisocyanates of varying NCO/OH ratio. The structure of these semi-IPNs were studied using various characterization techniques such as IR, nuclear magnetic resonance (NMR) spectra. The scanning electron microscopy of some of the semi-IPNs have been studied and the morphology has been examined. The samples were subjected to wide angle X-ray diffraction analysis. The degree of crystallinity (X_cr) was computed on the basis of the crystal defect concept, developed by Ruland and Vonk. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3117–3124, 1997