Synthesis of monodisperse hydroxyl-containing polystyrene via chemical modification

A facile synthesis of linear monodisperse hydroxyl-containing polystyrene, poly{styrene-co-[p-(1-hydroxyethyl)styrene]} and poly{styrene-co-[p-(2-hydroxypropan-2-yl)styrene]}, was carried out via chemical modification of polystyrene by a two-step procedure, i. e. monodisperse polystyrene was acetylated under mild conditions, followed by processes of reduction with LiAlH₄ and addition with CH₃MgBr, respectively. ¹H NMR and FTIR spectra showed that in both cases, the reaction of acetyl to hydroxyl is complete. Sizeexclusion chromatography demonstrated that both molecular weight and monodispersity of the final products were basically unchanged.     

Dynamics of macromolecular chains. VII. Nuclear magnetic relaxation of monosubstituted polystyrenes in solution

The ¹H spin-echo and ¹³C spin–lattice relaxation times have been measured for solutions of polystyrene derivatives: ortho, meta, and para-halo (F, Cl, Br) and ortho, meta, para, and α-methyl. Results obtained from these two techniques permit comparison of the intramolecular mobility of these polymers with that of polystyrene. Poly(α-methylstyrene) does not differ from polystyrene except for a slight slowing of both segmental reorientation and internal phenyl-group motions and apparent hindrance of the methyl-group rotation. Segmental reorientation of poly(m-methylstyrene) is similar to that of polystyrene; rotation of the methyl group is free, while the internal phenyl-ring process is slower. Poly(p-methylstyrene) and poly(o-methylstyrene) also contain freely rotating methyl groups; the intramolecular mobility decreases from the para to the ortho position of the substituent. Finally, in poly(o-bromostyrene) and poly(o-chlorostyrene), the internal motion of the phenyl ring is completely overshadowed by the segemental reorientation, which is itself quite reduced.     

Peak area measurements of cross-polarization magic-angle-spinning 13C-NMR spectra of crosslinked polystyrenes

Cross-polarization magic-angle-spinning ¹³C-NMR spectra of polystyrenes crosslinked with 1–20% of methine vinyl carbon ¹³C-labeled p-divinylbenzene and of Friedel–Crafts crosslinked poly(chloromethylstyrene)s have been obtained with both glossy solid and CDCl₃-swollen gel samples. The spectra of natural abundance, uncrosslinked, glassy polystyrene, and the spectra of the solid labeled networks give aliphatic and aromatic peak areas only 0.7 times as large per ¹³C atom as that of poly(oxymethylene). Similarly the crosslinked poly(chloromethylstyrene) gave peak areas about 0.6 times that of internal poly(oxymethylene). The labeled gels give peak areas 0.2–0.6 times as large per ¹³C atom as glassy polystyrene, and the peak areas in spectra of gels increase with the divinylbenzene content     

Synthesis of micron-sized poly(styrene-<Emphasis Type="Italic">co</Emphasis>-divinylbenzene) hollow particles from seeded emulsions by using swelling solvents

Hollow micron-sized poly(styrene-co-divinylbenzene) particles were produced in seeded emulsions in the presence of swelling solvents. The size and morphology of the resulting polymer particles can be altered by varying swelling solvent in seeded polymerization at elevated temperature. The effects of swelling agents, including hydrophobic solvents, hydrophilic solvents and solvent mixtures, on the microstructure of particles were investigated. The formation of hollow poly(styrene-co-divinylbenzene) particles depended significantly on a fast and effective phase separation between the cross-linked shell and the swollen core, that occurred only in the presence of an appropriate swelling solvent.     

Synthesis,characterization, and properties of block and bigraft copolymers

The syntheses of poly(styrene-b-isobutylene), poly[(ethylene-co-propylene-co-1,4-hexadiene)-g-styrene-g-α-methylstyrene], and poly[(ethylene-co-propylene-co-1,4-hexadiene)-g-styrene-g-isobutylene] have been accomplished by using the principle of selective sequential initiation. This method makes use of the large differences in initiation rates that exist between labile organic chlorides and bromides when these halides interact with alkylaluminum compounds. Synthesis conditions have been worked out which allow composition control. These new AB blocks and bigrafts exhibit unusual mechanical and solubility properties, some of which will be described. For example, the Nordel-g-PSt-g-PIB bigraft exhibits only one low temperature transition (DSC, Rheovibron), suggesting an intimate aggregation of Nordel and polyisobutylene phases.     

A novel synthesis of linear high-molecular-weight poly(4-vinylphenol) and poly[styrene-co-(4-vinylphenol)]

A novel synthesis of linear high-molecular-weight poly(4-vinylphenol) (PVPh) and poly[styrene-co-(4-vinylphenol)] (STVPh, 2 ) via demethylation reaction is developed. The parent polymers, poly(4-methoxystyrene) and poly[styrene-co-(4-methoxystyrene)] produced by free-radical polymerization, are converted to PVPh and STVPh ( 2 ), respectively, by being treated with trimethylsilyl iodide (TMSI) at room temperature. Both ¹H NMR and ¹³C NMR data show that methoxy is completely cleaved and converted to hydroxy after hydrolysis without crosslinking and other side reactions. In addition, size-exclusion chromatography data show that no chain scission occurs during group conversion.     

“Living” free radical copolymerization of styrene and N-vinylcarbazole

Poly[styrene-co-(N-vinylcarbazole)] copolymers with controlled molecular weights and narrow polydispersities were synthesized by nitroxide-mediated “living” free radical copolymerization using an initiator/capping agent system consisting of benzoyl peroxide (BPO) and the stable nitroxyl radical 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO). The copolymerization behaves in a “living” fashion and allows the synthesis of poly[styrene-co-(N-vinylcarbazole)]/polystyrene block copolymers via a controlled chain-extension reaction of the prepared copolymers with styrene.     

Phase Behaviour of Poly(styrene-co-methacrylic acid)/ Poly(styrene-co-N,N-dimethylacrylamide)/Poly(styrene-co-4-vinylpyridine) Ternary Blends by DSC and FTIR

Summary: we have investigated by DSC and FTIR the miscibility and phase behaviour of binary and ternary blends of different ratios of poly(styrene-co-methacrylic acid) containing 15 mol% of methacrylic acid (SMA15) with poly(styrene-co-N,N-dimethylacrylamide) containing 17 mol% of N,N,-dimethylacrylamide (SAD-17) and poly(styrene- co-4-vinylpyridine) containing 15 mol% of 4-vinylpyridine. SMA15 is miscible with both SAD17 and S4VP15 and interacts more strongly with S4VP15 than with SAD17 as evidenced by the positive deviations from linear average line observed with these blends and the appearance of new bands in the 1800–1550 cm⁻¹ region. This behaviour is known as ΔK effect. The FTIR study confirms that though the specific intermolecular interactions that occurred with each pair of the SMA15/S4VP15 and SMA15/SAD17 binary components are of different strength, they still exist in the ternary blend. Even though the three binary polymer pairs are individually miscible, the ternary system of SMA15/S4VP15/SAD17 exhibits only partial miscibility with small loop of immiscibility due to a significant ΔK effect. These results obtained by DSC and FTIR are in a fair agreement with theoretical prediction applying the Painter-Coleman association model.     

Synthesis and characterisation of a calix[4]pyrrole functional polystyrene via ‘click chemistry’ and its use in the extraction of halide anion salts

A polystyrene with pendant calix[4]pyrroles was prepared via ‘click reaction’ strategy. First, a poly(styrene-co-chloromethylstyrene) with approximately 12% of chloro groups was prepared by conventional free radical polymerisation. The chloro groups were then converted to azido groups using NaN₃ in N,N-dimethylformamide. An alkyne-functionalised calix[4]pyrrole was then coupled to the azido-functionalised polystyrene by click chemistry with high efficiency. The resulting polystyrene with pendant calix[4]pyrroles was used to extract fluoride and chloride anions (as their tetrabutylammonium salts) from their aqueous solutions to organic media.     

Carboxy-terminated homo- and copolymers of styrene using dicarboxylic acid-functional azo initiator and 2,2,6,6-tetramethyl-1-piperidyloxyl (TEMPO)

Carboxy-terminated polystyrene, poly(styrene-co-acrylonitrile), and polystyrene-block-poly(styrene-co-acrylonitrile) with ratios of weight- to number-average molar masses M̄_w/M̄_n below 1.3 were synthesized via a controlled radical polymerization mechanism. The polymerizations were initiated with 4,4′-azobis(4-cyanopentane-carboxylic acid) and 2,2,6,6-tetramethyl-1-piperidyloxyl radical and conducted in bulk at elevated temperatures. The polymerization was monitored by nuclear magnetic resonance, size-exclusion chromatography, end-group titration and differential scanning calorimetry.     

Monodisperse micron-sized macroporous poly(styrene-co-divinylbenzene) particles by seeded polymerization

Macroporous poly(styrene-co-divinylbenzene) particles were produced in a micron-size range by two-stage swelling and continuous polymerization. The molecular weight of the polystyrene seed particles was controlled by incorporating a urethane acrylate. It was found that the porosity of the particles produced by the seeded polymerization was dependent on the molecular weight of the seed polymer. As the molecular weight of the polystyrene seed increased, the porous particles produced became macroporous. Interestingly, the high molecular weight of the polystyrene seed had a negligible influence on the change of porosity of the seeded polymerized particles. It is believed that the viscosity of the swollen droplet phase remained pretty high with the change in composition because the polystyrene seed copolymerized with urethane cacrylate had many side chains. Received: 16 December 1999 Accepted: 9 August 2000     

A novel synthesis of acrylic acid containing polymers

A novel synthesis of linear acrylic acid containing polymers, poly(styrene-co-acrylic acid) and poly(acrylic acid), was accomplished through hydrolysis of the respective parent polymers, i.e. poly(styrene-co-methyl acrylate) and poly(methyl acrylate), with trimethylsilyl iodide under mild conditions. Combination of ¹H NMR, ¹³C NMR, FTIR, DSC and chemical titration confirms that the conversion from methoxycarbonyl to carboxyl is almost complete. This method is further successfully applied to synthesize poly-(ethyl methacrylate-co-acrylic acid) through selective hydrolysis of the methyl acrylate units in poly(ethyl methacrylate-co-methyl acrylate).     

Toward efficient functionalization of polystyrene backbone through ketene chemistry: Synthesis,characterization, and DFT study

In this study, polystyrene was functionalized with Meldrum's acid toward the introduction of the ketenes (CCO) system to its backbone for producing a dramatically reactive intermediate. Meldrum's acid, as a ketene source, was reacted by poly(styrene-co-p-chloromethyl styrene) through a simple nucleophilic reaction to synthesize poly(styrene-co-styryl Meldrum's acid). Then, the pendant Meldrum's acid under thermal treatment converted to ketene intermediate resulting in highly reactive polystyrenes derivatives, which rapidly reacted by nucleophilic reagents to afford ultimate organic building blocks. The polystyrene derivatives were characterized using elemental analysis, FT-IR, high-resolution solid-state NMR, thermogravimetric analysis (TGA), and differential thermogravimetric analysis (DTG). To clarify the evolutionary mechanisms of polystyrene products, density functional theory (DFT) method B3LYP with the 6–311++G(2d,p) basis set was used. We studied the preparation of polystyrene model compounds through Meldrum's acid thermolysis and nucleophilic substitution. The kinetic and thermodynamic parameters in all reactions and the structural and electronic properties of all molecules were calculated. These data exhibited that based on Gibbs Free energy values, the structure of syndiotactic polystyrene is more stable than that of isotactic polystyrene. Furthermore, it was found that the presence of an electron donor or acceptor substituent on the polystyrene structure affects the electronic bandgap.     

Novel,well‐defined polystyrene with a fluorine cluster end‐capped group: Synthesis,characterization, and surface properties

Novel, well‐defined fluorinated polystyrene was synthesized for the first time via the controlled radical polymerization of styrene through a relatively simple process and was characterized with ¹H NMR, ¹⁹F NMR, and gel permeation chromatography. The surface properties of polystyrene and poly(acrylonitrile‐co‐butadiene‐co‐styrene) films were modified with the obtained polymers. X‐ray photoelectron spectroscopy measurements of the air‐side surface composition of the modified poly(acrylonitrile‐co‐butadiene‐co‐styrene) films showed that fluorine enriched the outermost surface, resulting in fantastic surface properties that came close to those of poly(tetrafluoroethylene). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3853–3858, 2006     

Surfactant-free emulsion copolymerization of styrene and methyl methacrylate for preparation of water-redispersible polymeric powders

Poly(methyl methacrylate), polystyrene, and poly(styrene-co-methyl methacrylate) cationically stabilized latexes with up to 25% solid content were prepared by surfactant-free emulsion polymerization (SFEP) employing 1 mol % 2,2′-azobis[2-(2-imidazolin-2-yl)propane]dihydrochloride (VA-044) as an initiator and stabilizer (inisurf) with respect to monomer at 70 °C. The latexes had 200–500 nm z-diameter and a very narrow size distribution (PDI < 0.05). The stabilizing amidinium moieties from VA-044 were covalently bound to the particles. After drying in air, poly(styrene-co-methyl methacrylate), PS-co-PMMA latexes were easily redispersible in water simply by addition of water and a few minutes of gentle stirring. The redispersed latex particles had colloidal characteristics very similar to the original latex particles in terms of polydispersity, size, and zeta potential. In contrast, latexes prepared with a similar formulation but using a conventional cationic surfactant (CTAB) that was not covalently bound to the particles were not redispersible. This is the simplest method reported so far for the preparation of redispersible latexes that do not use high stabilizer concentrations. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2376–2381     

Monodisperse chloromethyl-functionalized macroporous polymer particles by seeded polymerization in aqueous media

This study presents a method to produce monodisperse chloromethyl-functionalized macroporous poly(styrene-co-divinylbenzene) polymer particles by seeded polymerization in aqueous media. We observed that the molecular structure of polystyrene seed particles, the composition of the secondary monomer mixtures, and the type of solvents were very important factors that determine the morphology and porosity of the final particles. This study proposes that the molecular chemistry of polystyrene seed polymers, increasing molecular weight or crosslinking, is another factor that can control the porosity of the final particles. Also, the selection of a poor solvent was effective in forming the larger surface area. In this study, it was confirmed that the chloromethyl groups introduced on the surface of porous particles were quantified chemically and their effective incorporation had a close relationship with the surface area.     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Dilute-solution properties of ring polystyrenes

The temperature Θ_A2 at which the second virial coefficient A₂ is zero for ring polystyrenes is 28.5°C in cyclohexane, independent of molecular weight in the range 2 × 10⁴ to 4.5 × 10⁵. This cannot be explained solely by the Candau–Rempp–Benoit theory, which takes into account the effect of segment density on Θ_A2 The radius of gyration of a ring is found to be approximately one-half that of a linear polymer with the same molecular weight. The intrinsic viscosities [η] and intrinsic translational friction coefficients [f] of ring polystyrenes with molecular weights ranging from 7 × 10³ to 4.5 × 10⁵ have been measured in cyclohexane at 34.5°C (Θ, the Flory theta temperature for linear polystyrenes) and in toluene (a good solvent). The results are compared with those for linear polystyrene. It is found that the Mark–Houwink exponent is less than one-half in cyclohexane at Θ. In toluene it is 0.67 compared to 0.73 for linear polystyrene. The hydrodynamic measurements suggest that large rings are less expanded than the linear polymers with the same molecular weight, contrary to many predictions.     

Molded separation media: An inexpensive,efficient, and versatile alternative to packed columns for the fast HPLC separation of peptides,proteins, and synthetic oligomers and polymers

A simple molding process carried out within the confines of a chromatographic column has been used for the preparation of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) and poly(styrene-co-divinylbenzene) rods. The novel monolithic separation media that are obtained are useful for the HPLC separation of biological and synthetic polymers. The presence of large pores with a diameter of about 1 μm makes the molded rod columns easily permeable to eluents. Therefore, the back pressure of these columns is modest even at high flow rates. In contrast to the conventional HPLC columns packed with beads, all of the mobile phase flows through the continuous monolithic medium. As a result of this total convection, the efficiency of the molded media is almost independent of the flow rate. This improves significantly the separation ability of the rod columns and very fast separations of macromolecules such as peptides, proteins, and synthetic polymers have been demonstrated.     

Monodisperse polymer beads as packing material for high-performance liquid chromotography: Effect of divinylbenzene content on the porous and chromatographic properties of poly(styrene-co-divinylbenzene) beads prepared in presence of linear polystyrene as a porogen

The effect of concentration of divinylbenzene on pore size distribution and surface areas of micropores, mesopores, and macropores in uniformly sized porous poly(styrene-co-divinylbenzene) beads prepared in the presence of linear polystyrene as a component of the porogenic mixture has been studied. While the total specific surface area was clearly determined by the content of divinylbenzene, the sum of pore volumes for mesopores and macropores as well as their size distribution does not change within a broad range of DVB concentrations. Consequently, the size exclusion chromatography calibration curves are almost identical for all the beads prepared with different percentages of crosslinking monomer. However, the more crosslinked beads have better mechanical and hydrodynamic properties. © 1994 John Wiley & Sons, Inc.