A screw-shaped alignment of pyrene using m-calix[3]amide

m-Calix[3]amide bearing three pyrenes (1a) was prepared by the condensation reaction of 3-nonylaminobenzoic acid derivative using Ph₃PCl₂. Pyrenyl groups were found to be aligned in the screw-like fashion by m-calix[3]amide as confirmed by the X-ray crystallography. Aromatic proton signals observed at the up-field region in the ¹H NMR spectrum at low temperature indicated that pyrenyl groups in 1a are aligned in close proximity in THF solution. UV–vis absorption and fluorescence emission spectra did not show marked peak shift nor concentration fluorescence quenching compared with reference compounds implying no significant electronic interaction between pyrenyl groups. These results can be explained by the steric effect of the m-calix[3]amide platform. On the other hand, an excimer emission was observed for m-calix[3]amide having a flexible spacer between pyrene and m-calix[3]amide (1b).     

Fluorescence quenching of pyrene monomer and excimer by CH3I

The fluorescence quenching rate constants of pyrene monomer and excimer by CH₃I were obtained at several temperatures in methylcyclohexane. Both quenching processes are kinetically controlled, allowing insight on the mechanism of quenching. The rate constants have both temperature-independent and temperature-dependent components. The temperature-independent component for both monomer and excimer fluorescence is consistent with quenching due to enhanced intersystem crossing to a lower energy triplet state. The monomer temperature-dependent component comes from the enhancement of the intersystem crossing to a higher energy triplet state. The thermally activated excimer quenching is associated with the excimer dissociation step to give a pyrene in a second triplet state plus a ground state pyrene molecule.     

Uptake of pyrene by NaCl, NaNO3, and MgCl2 aerosol particles

Photoelectric charging experiments measure heterogeneous uptake coefficients for pyrene on model marine aerosol particles, including NaCl, NaNO(3), and MgCl(2). The analysis employs a multilayer kinetic model that contains adsorption and desorption rate constants for the bare aerosol surface and for pyrene-coated surfaces. First coating the aerosol particles with a pyrene layer and following the desorption using both t-DMA and photoelectric charging yields the desorption rate constants. Separate experiments monitor the increase in surface coverage of initially bare aerosol particles after exposure to pyrene vapor in a sliding-injector flow tube. Analyzing these data using the multilayer model constrained by the measured desorption rate constants yields the adsorption rate constants. The calculated initial heterogeneous uptake coefficient, γ(0)(295 K), is 1.1 × 10(-3) for NaCl, 6.6 × 10(-4) for NaNO(3), and 6.0 × 10(-4) for MgCl(2). The results suggest that a free energy barrier controls the uptake rate rather than kinematics.     

Selenospiropyrans incorporating appended pyrene chromophores

The synthesis of two pyrene-based selenospiropyran dyads is described along with their absorption profiles in various solvents.     

Emission studies of pyrene solutions

Emission spectra of pyrene in hexane have been obtained over a temperature range (from 130 to 260 K) that has not been explored before for concentrations ranging from 10^?4 mole/? to 2 × 10^?2 mole/?. A conventional and new approximation which does not depend on the experimental set-up response functions has been used for evaluating pyrene excimer association energy W_DM and other pyrene parameters. In both methods W_DM agrees quite satisfactorlly, at all concentrations used, with that reported in the literature and obtained by other techniques. However, both approximation fail to yield the right values of the rate parameters at concentrations ? 2 g/?. This set the upper limit of sample solubility to be at C = 2g/? for our range of temperature. Furthermore, the new approximation can probably be used at higher concentration (for higher range of temperature) and even may be used for other organic molecules. There was also no difference in the ratio of the excimer (I_D) to monomer (I_M) quantum yields when an intense laser beam was used as a source of excitation rather than a super-pressure Hg-lamp. This suggested that the concentrations we used might not be large enough. As a result, the laser beam would not create enough density of excited molecules to affect the ratio of I_D/I_M.     

Phosphorescence of pure crystalline pyrene

The phosphorescence spectrum of highly purified crystalline pyrene was measured. The emission is structured and exhibits mirror symmetry within the S₀?T₁ absorption spectrum. No excimer phosphorescence could be detected.     

Upconverted emission from pyrene and di-tert-butylpyrene using Ir(ppy)3 as triplet sensitizer

Metal-to-ligand charge-transfer sensitized upconverted fluorescence in noncovalent triplet energy transfer assemblies is investigated using Ir(ppy)3 as the sensitizer (ppy=2-phenylpyridine) and pyrene or 3,8-di-tert-butylpyrene as the triplet acceptor/annihilator. Upconverted singlet fluorescence from pyrene or 3,8-di-tert-butylpyrene resulting from triplet-triplet annihilation (TTA) is observed following selective excitation of Ir(ppy)3 in deaerated dichloromethane solutions using 450-nm laser pulses. In both systems, the TTA process is confirmed by the near quadratic dependence of the upconverted fluorescence intensity on incident light power, measured by integrating the upconverted delayed fluorescence kinetic traces as a function of incident excitation power. At the relatively high concentrations of pyrene that were utilized, pyrene excimer formation was detected by its characteristic broad emission centered near 470 nm. In essence, selective excitation of Ir(ppy)3 ultimately resulted in the simultaneous sensitization of both singlet pyrene and pyrene excimers, and the latter degrades the energy stored in the pyrene singlet excited state. Furthermore, in the case of di-tert-butylpyrene/Ir(ppy)3, the formation of excimers is successfully blocked because of the presence of the sterically hindering tert-butyl groups. The current work demonstrates that sensitized TTA is indeed accessible to chromophore systems beyond those previously reported, suggesting the generality of the approach.     

功能性三价铕离子的金属有机骨架选择性荧光识别芘

成功设计并通过水热法合成了一种具有功能性三维结构的镧系金属有机骨架 Eu-4L,其配体为二苯胺四羧酸衍生物(H₄L)。Eu-4L 的骨架中含有 3D 空腔,且其比表面积较高。Eu-4L 不仅热稳定性较高,且在 pH 为 3~11 的范围内稳定性良好。Eu-4L可以作为荧光探针选择性识别稠环芳烃芘,其检测限为5 μmol·L^-1,具有较高的灵敏度,且具备可循环重复利用的特性。Eu-4L荧光识别芘的作用机理为稳态荧光识别机理。此外,对Eu-4L的荧光识别选择性、竞争能力也进行了详细地讨论。     

Photophysics of pyrene adsorbed on aerosil

The spectral luminescence properties of pyrene adsorbed on the surface of aerosil have been investigated at different thermal activation temperatures (453, 773, and 1073°K) and different degrees of surface coverage (0.01–10% of monolayer). The differences from the properties of pyrene adsorbed on silica gel are dictated by the high polarity of the aerosil surface, the less significant rearrangement of its hydroxyl coverage in thermal treatment, and its pronounced energetic discrete homogeneity at low degrees of coverage.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 23, No. 1, pp. 121–125, January–February, 1987.     

DNA-intercalation on pyrene modified surface coatings

Utilising the strong affinity between nucleic acids and an intercalating pyrene derivate, a novel efficient method for unspecific immobilisation of double-stranded DNA on to solid support for applications in bioanalytic, biophysics and microbiology is presented.     

Circularly polarized luminescence from pyrene excimers

Recently, many reports have emerged about circularly polarized luminescence (CPL) based on excimer emission of pyrenes. The intense CPL was observed from various pyrene derivatives such as pyrenes having chiral side chains, chiral oligomers bearing multiple pyrene rings, and pyrenes encapsulated by γ-cyclodextrins. The luminescence dissymmetry factor was found to be obviously higher than the absorption one in those pyrenes. In addition, several pyrenes revealed reversible “on-off” CPL switching upon the complexation/decomplexation of metal ions.     

The two-photon excitation spectrum of pyrene

The two-photon excitation spectrum of pyrene and the polarization ratio Ω have been measured up to ≈2100 Å. Evidence of a strong vibronic couplin     

Triplet exciton lifetime in crystalline pyrene

The triplet exciton lifetime in crystalline pyrene is found to be 140 ± 10 msec at room temperature, over 500 times longer than previously reported values. The temperature dependence of the triplet lifetime has been measured over the range 80–300°K. The rate of bimolecular annihilation of triplet excitons in pyrene is found to be independent of temperature over the range 150–300°K. It is concluded that the transfer of triplet energy within the crystal may be described using the monomer exciton model.     

Fluorescent polymer particles incorporating pyrene derivatives

Fluorescent polymer particles incorporating pyrene and alkynylpyrenes were prepared by miniemulsion polymerization of styrene. The pyrenes were simply dissolved in styrene monomer and then added to the reaction mixture in a vessel, followed by ultrasonication and the polymerization. The pyrenes were incorporated in the polystyrene particles and gave monomer fluorescence emission. The fluorescent particles incorporating the alkynylpyrenes, which have high fluorescence quantum yield and short fluorescence lifetime, showed the same fluorescence emission intensity under air and nitrogen. The fluorescence of the alkynylpyrenes in the polymer particles will not be quenched by molecular dioxygen in contrast to that in organic solvents. Incorporation of fluorophore into polymer particles will protect the fluorophore from its undesirable interaction with oxygen, affording the particles highly fluorescent even under air. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1470–1475, 2008     

Probing intermolecular communication with surface-attached pyrene

We report on the covalent attachment of pyrene derivatives to solid substrates and their spectroscopic and electrochemical characterization. We have constructed several molecular assemblies attached to silica and indium-doped tin oxide surfaces where pyrene molecules are co-immobilized with other functionalities. It was shown that the addition of hydrophobic molecules to the pyrene-containing interface results in a significant decrease in the pyrene I1/I3 vibronic emission band ratio and an increase in the water drop contact angle due to increased hydrophobicity of the interface. The co-attachment of perylenedodecanoic acid, for which the absorption band overlaps with the emission spectrum of pyrene, shows significant intermolecular communication between these species. The co-immobilization of ferrocene serves as an effective fluorescence quencher for tethered pyrene. In all cases, our data point to significant intermolecular communication between adsorbate species, and the combination of spectroscopic and electrochemical interrogation provides insight into the loading density and local environment(s) characteristic of these interfaces.     

Exciplex fluorescence of ([Zn(bipy)1.5(NO3)2)].CH3OH.0.5pyrene)n: a coordination polymer containing intercalated pyrene molecules (bipy = 4,4'-bipyridine)

We report the first use of fluorescence spectroscopy to probe the environment of the cavities that are present in open framework coordination polymers.