Tetrathiafulvalene-based organic conductors with Pb-containing anions

Hybrid compounds containing organic layers composed of tetrathiafulvalenes (BEDT-TTF, BETS, BEDO-TTF) and inorganic layers consisting of anions based on lead bromide were synthesized. The crystal structure of (BEDT-TTF)₆Pb₃Br₁₀(PhBr) was determined. The temperature dependences of electrical conductivity for the synthesized compounds were measured and the EPR spectra of these compounds were recorded. In the structure of (BEDT-TTF)₆Pb₃Br₁₀(PhBr), the organic conducting layers of BEDT-TTF molecules alternate with non-conducting layers composed of infinite chains of bromoplumbate anions [Pb₃Br₉]^3–, solvent molecules, and Br^– anions. The newly synthesized BEDT-TTF bromoplumbates have similar linewidths of EPR signals, which indicate that their conducting layers have similar structures. The BEDT-TTF bromoplumbates are semiconductors, while temperature-dependent electrical resistivity measurements show the metallic behavior for BEDO-TTF and BETS bromoplumbates.     

Adsorptive passivation of iron by organic acid anions

Studies on the iron passivation by organic acid anions in aqueous solutions are briefly reviewed. It is shown that the passivation can be caused only by their adsorption, retarding both the iron dissolution and the formation of oxide films. Earlier, it had been believed that oxide films play a dominant role in the iron passivation in neutral solutions. The recent viewpoint is that such nonoxide iron passivation can occur in solutions of salts of not only aromatic amino acids (sodium phenylantranilate and its substitutes), but other carboxylic acids as well. An important role of chemisorption and hydrophobic properties of anions for the formation of adsorption passive films is emphasized. New possibilities for inhibitor protection of iron against corrosion, which is based on adsorptive passivation, are pointed out.Translated from Elektrokhimiya, Vol. 40, No. 12, 2004, pp. 1503–1507.Original Russian Text Copyright © 2004 by Kuznetsov.     

Determination of trace anions in organic solvents.

Ion chromatography along with matrix elimination was used to reliably determine trace levels of anionic contaminants in organic solvents. A 5-ml sample volume was injected directly into the instrument without any sample pretreatment. High-purity deionized water was used to deliver the sample to a preconcentration column, where the anions of interest were retained while the organic matrix was rinsed to waste. A sodium carbonate eluent eluted concentrated anions from the preconcentration column and separated them on a 2-mm pellicular anion-exchange column. The separated anions were detected by suppressed conductivity. This method was used to determine the anionic contaminants of isopropanol, acetone and N-methylpyrrolidone. Method detection limits for chloride, nitrate, sulfate and phosphate were all lower than 1 microg/l.     

Polymeric sensors for determination of anions of organic acids

New polymeric electrochemical sensors based on various neutral and charged organic ionophores were suggested. The new sensors have a high sensitivity to anions of various organic acids (acetic, oxalic, lactic, malic, succinic, tartaric, and citric) in a wide concentration range. The selectivity and the detection limit of the developed sensors with respect to anions of the acids were studied.     

Polarography of some anions in aqueous organic solvent mixtures

The present investigation deals with the polarographic behaviour of iodate ions in various aqueous mixtures of methanol, ethanol, n-propanol, iso-propanol, 1,2-propanediol, 1,3-propanediol, and glycerol at 30°C. 0.1M-NaOH was used as a base electrolyte. The half-wave potential ranges from 1.24 to 1.46 and the diffusion current decreases with increasing percentage of the solvent. The plots ofi _d vs. andi _d vs.c were linear and pass through origin for all the solvent mixtures, showing that the limiting current is diffusion controlled. The plots of logi/(i_d–i) vs.E _d.e. were linear for all the aqueous organic solvent mixtures, but the value of slope suggested that the reductions are irreversible. The electrode kinetics was studied byKoutecky's method for irreversible electrode process.     

Fragmentation of organic anions induced by exothermic addition reactions

The addition reactions of a series of carbanions with CO₂, COS and CS₂ have been studied in a flowing afterglow apparatus. Carbon dioxide simply forms the adduct, but the more highly exothermic additions to COS and CS₂ lead both to addition and addition followed by fragmentation. A number of novel fragmentation pathways have been observed for additions to diazo anions and to anions derived by proton abstraction from allenes. In addition to these reactions, highly basic anions are observed to undergo sulfur atom transfer reactions with CS₂.     

The assembly of organic radical anions between metal-borate scaffolds

Metal-organic frameworks based on the Pb[B(Im)(4)](+) unit form layered structures analogous to those observed in clays and double layered hydroxide minerals. These layers can act as scaffolds for the organization of anionic organic guests. In this report, we use this scaffold to assemble TEMPO and PROXYL carboxylates in the interlayer spacings of Pb[B(Im)(4)](4-carboxy-TEMPO) 1 and Pb[B(Im)(4)](3-carboxy-PROXYL)(H(2)O)2, respectively. The resultant materials are paramagnetic, and the organization of the radical units differs between the two compounds. This results in changes in electronic structure of the radical unit, as observed by EPR spectroscopy.     

Adsorption of organic anions on iron in aqueous solutions: An ellipsometric study

Adsorption of anions of higher aromatic amino acids on the surface of iron from aqueous solutions is studied by an ellipsometric method concurrently with electrochemical measurements. It is demonstrated that ellipsometry is an effective method for studying in situ regularities governing the adsorption of anions of organic acids on the surface of metallic electrodes. Variations of ellipsometric parameters with the adsorbate concentration make it possible to obtain adsorption isotherms and determine adsorption characteristics.     

Structural elucidation of sumanene and generation of its benzylic anions

The structure of sumanene in a solid state was elucidated. The silyl-substituted sumanene was stereoselectively synthesized through generation of the benzylic anions of sumanene.     

Structural features of zinc hydroxyfluoride

Zinc hydroxyfluoride (ZnOHF), obtained by coprecipitation of a zinc salt in aqueous HF, exhibits a variable stoichiometry Zn(OH)_2−xF_x, where x is tuneable from 0.63 to 0.87 by controlling the pH of the solution. The structure was determined from Rietveld refinements using X-ray powder diffraction data. Crystallizing with the orthorhombic symmetry (SG : Pna2₁), the ZnOHF-type structure exhibits two different anionic sites. A bond valence analysis shows that fluorine exclusively occupies the anionic site that has shorter contacts to zinc. This site is split into two partially occupied sites, one corresponding to the position of a fluoride ion and the other to the position of a hydroxide ion. Bond valence calculations show that the split site model gives a more accurate picture of the local coordination of the anions on this site.     

Structural features of carbon products: an NMR study

Structural characteristics of a series of carbon products and intermediates of carbonization of some polymers were studied by high-resolution solid-state ¹³C NMR spectroscopy, with comparison of the experimental and calculated spectroscopic data.     

Structural features of polymer adsorbent LiChrolut EN and interfacial behavior of water and water/organic mixtures

The structural and adsorption characteristics of polymer adsorbent LiChrolut EN and the behavior of adsorbed water and water/organic mixtures were studied using adsorption, microcalorimetry, transmission and scanning electron microscopy, mass spectrometry, infrared spectroscopy, 1H NMR spectroscopy with layer-by-layer freezing-out of liquids (190-273 K), and thermally stimulated depolarization current method (90-265 K). This adsorbent is characterized by large specific surface area (approximately 1500 m2/g) and pore volume (0.83 cm3/g) with a major contribution of narrow pores (R<10 nm) of a complicated shape (long hysteresis loop is in nitrogen adsorption-desorption isotherm). The adsorbent includes aromatic and aliphatic structures and oxygen-containing functionalities and can effectively adsorb organics and water/organic mixtures. On co-adsorption of water and organics (dimethyl sulfoxide, chloroform, methane), there is a weak influence of one on another adsorbate due to their poor mixing in pores. Weakly polar chloroform displaces a fraction of water from narrow pores. These effects can explain high efficiency of the adsorbent in solid-phase extraction of organics from aqueous solutions. The influence of structural features of several carbon and polymer adsorbents on adsorbed nitrogen, water and water/organics is compared on the basis of the adsorption and 1H NMR data.     

Probing the intrinsic features and environmental stabilization of multiply charged anions

Multiply charged anions (MCAs) represent exotic, highly energetic species in the gas-phase due to their propensity to undergo unimolecular decay via electron loss or ionic fragmentation. There is considerable fundamental interest in these systems since they display novel potential energy surfaces that are characterized by Coulomb barriers. Over recent years, considerable progress has been made in understanding the factors that affect the stability, decay pathways and reactivity of gas-phase MCAs, mainly as a result of the application of electrospray ionization as a generic technique for transferring solution-phase MCAs into the gas-phase for detailed characterization. We review contemporary work in this field, focusing on the factors that control the intrinsic stability of MCAs, both as isolated gas-phase ions, and on their complexation with solvent molecules and counter-ions. While studies of MCAs are primarily of fundamental interest, several classes of important biological ions are commonly observed as MCAs in the gas-phase (e.g. oligonucleotides, sugars). Recent results for biologically relevant ions are emphasised, since a fundamental understanding of the properties of gas-phase MCAs will be highly valuable for developing further analytical methods to study these important systems.     

The stereochemistry of alkylation of 7-alkyl-7.12-dihydropleiadene anions

Attempts to rationalize the stereochemistry resulting from the alkylation of 7-R-12-metallo-7,12-dihydropleiadene from the geometries of the neutral precursors were not successful. A new model is suggested.     

Ion-pair extraction of some cinchona alkaloids with various chiral organic anions

Some cinchona alkaloids, the quinine/quinidine and cinchonine/cinchonidine pairs, are extracted by ion-pair formation with some chiral amino acids and d-camphorsulfonic acid. Their extraction behaviors are examined and the differences between the two isomers are compared. These alkaloids are extracted into chloroform in the pH range 4–7 as the 1:1 ion-pair with the organic acid. The relationship between the distribution ratio of the ion-pair and pH is discussed. In the pH range between the pK_a1 and pK_a2 values of these alkaloids, logarithmic plots of the distribution ratio are independent of pH. In this pH region, the extraction constants are determined and the differences caused by the ion-pair formation are discussed.     

Changes in polyvinylpyrrolidone coil dimensions by complexation with organic anions: effect of chain length

Changes in polyvinylpyrrolidone (PVP) coil dimensions by complexation with small organic anions were studied by dilure solution viscometry Intrinsic viscosity provides a convenient measure of the dimensions assumed by a flexible polymer chain in solution as a result of interactions with all components in its environment. Molecular interactions between PVP and sodium benzoate and salicylate were investigated over a range of low concentrations of each anion, from 2.5 to 90 mM, and as a function of five molecular weight grades of PVP. This study showed that both contraction and expansion of polymer coils were sensitive to the concentration and chemical structure of the cosolute. In addition, at high anion concentrations changes in polymer conformation by complexation were dependent on both the chain length of PVP and charge density of bound anions through excluded volume effects. Experimental results demonstrating these observations are presented in a three-dimensional surface plot of intrinsic viscosity ratio, polymer size, and anion concentration. A distinct local minimum in the surface plane was exhibited for each cosolute.     

Hydrazine: Structural features and conformational preference in nanotubes

Investigation of structural features and conformational transformations of the hydrazine molecule in open single walled carbon nanotubes using the hybrid DFT method PBE/3ζ revealed in most cases the contraction of the N–N bond length, decrease in its order, generation of a positive or negative charge on the encapsulated molecule and a substantial decrease in the rotation barrier about the N–N bond caused by stabilization of the local maximum (anti-form) apparently, due to attenuation of the hyperconjugation effect in the hydrazine molecule. In one of clusters this form becomes the global minimum on the potential energy surface.     

Structural features of catalytically active oligoorganometallosiloxanes

Copper- and (copper, aluminum)-containing organosiloxanes were studied by spectroscopic methods. It was found that in organometallosiloxanes (OMS) with an increased content of copper (Si/Cu=1 ∶ 1) Cu atoms are rather uniformly distributed in the siloxane matrix. All compounds under study are complexes characterized byd-d-transitions in copper ions with a constant coordination number of the metal atom. The intensity of thed-d-transition band increases as the copper content increases. ESR studies demonstrated that in the compounds under consideration, a change from mononuclear paramegnetic centers to clusters, in which copper ions are linked by strong spin-exchange interactions, occurs as the copper content increases. The catalytic activity of the above-mentioned compounds in isomerization reactions of 3,4-dichlorobutene-1 was studied. It was found that copper atoms serve as catalytic centers. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1946–1949, October, 1998.